Synthesis of cationic polymer-grafted cellulose by aqueous ATRP

Preparation of polyvinyl chloride (PVC) membrane blended with acrylamide grafted bentonite for oily water treatment

The current work aims to advance the hydrophilicity, morphology, and antifouling characteristics of polyvinyl chloride (PVC) membranes for oily wastewater separation by incorporating modified bentonite. The surface of bentonite nanoparticles is altered by adopting the "grafting from" method using the surface-initiated atom transfer radical polymerization (SI-ATRP) approach. The PVC-based membrane is first prepared by blending acrylamide grafted bentonite (AAm-g-bentonite). AAm is grafted on bentonite in the presence of 2,2'-Bipyridyl and copper (I) bromide as a catalyst. The modified bentonite nanoparticles are studied using multiple techniques, such as fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), sedimentation tests, field emission scanning electron microscope (FE-SEM), etc. Flat-sheet PVC-based membrane is prepared by blending AAm-g-bentonite using the nonsolvent induced phase separation (NIPS) technique. Different methods, including FE-SEM, FTIR, sedimentation test, contact angle, porosity, antifouling property, and filtration studies of pure and oily water, are used to characterize and determine the performance of mixed-matrix membranes. Membrane performance is improved in the presence of modified bentonite (i.e., AAm-g-bentonite), with the best result achieved at PVC/AAm-g-ben-8 (i.e., 8 wt % of AAm-g-bentonite). Enhanced pure water flux (293.14 Lm^-2h^-1), permeate flux (123.96 Lm^-2h^-1), and oil rejection >93.2% are obtained by the reduced contact angle (49.1°) and improved porosity (71.22%).

Controllable synthesis of patchy particles with tunable geometry and orthogonal chemistry

HYPOTHESIS

Self-assembly using anisotropic colloidal building blocks may lead to superstructures similar to those found in molecular systems yet can have unique optical, electronic, and structural properties. To widen the spectrum of achievable superstructures and related properties, significant effort was devoted to the synthesis of new types of colloidal particles. Despite these efforts, the preparation of anisotropic colloids carrying chemically orthogonal anchor groups on distinct surface patches remains an elusive challenge.

EXPERIMENTS

We report a simple yet effective method for synthesizing patchy particles via seed-mediated heterogeneous nucleation. Key to this procedure is the use of 3-(trimethoxysilyl)propyl methacrylate (TPM) or 3-(trimethoxysilyl)propyl acrylate (TMSPA), which can form patches on a variety of functional polymer seeds via a nucleation and growth mechanism.

FINDINGS

A family of anisotropic colloids with tunable numbers of patches and patch arrangements were prepared. By continuously feeding TPM or TMSPA the geometry of the colloids could be adjusted accurately. Furthermore, the patches could be reshaped by selectively polymerizing and/or solvating the individual colloidal compartments. Relying on the chemically distinct properties of the TPM/TMSPA and seed-derived domains, both types of patches could be functionalized independently. Combining detailed control over the patch chemistry and geometry opens new avenues for colloidal self-assembly.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Synthesis of copolymer derived from tamarind kernel polysaccharide (TKP) and poly(methacrylic acid) via SI-ATRP with enhanced pH triggered dye removal

A novel copolymer derived from tamarind kernel polysaccharide (TKP) and poly(methacrylic) acid (g-TKP/pMA) has been successfully synthesised through surface initiated atom transfer radical polymerization (SI-ATRP).

Natural Cationic Polymers for Advanced Gene and Drug Delivery

Gene and drug delivery is becoming more and more important in the treatment of complicated human diseases. Proper gene/drug delivery systems can effectively enhance therapeutic efficiency and minimize various side-effects. To date, a variety of delivery systems have been developed. Different from synthetic materials, natural polymers are abundant in nature, renewable, non-toxic, biocompatible and biodegradable. Owing to the presence of positive charges, natural cationic polymers have found important applications in many biological fields, such as drug/gene delivery and tissue engineering. In gene delivery, natural cationic polymers can condense nucleic acids, protect them from degradation, lower the immunogenicity and improve overall transfection efficiency. In drug delivery, cationic functional groups can alter the amphiphilic properties of the polymers to ensure their suitable applications for delivering hydrophobic or protein drugs. After simple chemical modification, the derivatives of natural cationic polymers show improved performance as functional delivery carriers. In this chapter, details on the chemical modification of natural cationic polymers and their applications in gene/drug delivery is discussed.

The preparation of graft copolymers of cellulose and cellulose derivatives using ATRP under homogeneous reaction conditions

Atom transfer radical polymerisation (ATRP) is used to modify cellulose and cellulose derivatives under homogeneous conditions, yielding novel materials for application in areas such as drug delivery.

Nanocrystalline cellulose grafted random copolymers of N-isopropylacrylamide and acrylic acid synthesized by RAFT polymerization: effect of different acrylic acid contents on LCST behavior

NCC-attached dual-sensitive copolymers of N-isopropylacrylamide and acrylic acid (AA) with different contents of AA were synthesized by RAFT polymerization. Effect of NCC, AA content, and pH on LCST was evaluated.

Smart assembly behaviors of hydroxypropylcellulose-graft-poly(4-vinyl pyridine) copolymers in aqueous solution by thermo and pH stimuli

Thermo- and pH-sensitive graft copolymers, hydroxypropylcellulose-graft-poly(4-vinyl pyridine) (HPC-g-P4VP), were synthesized via atom transfer radical polymerization (ATRP) and characterized. The thermo- and pH-induced micellization and stimuli-responsive properties of HPC-g-P4VP graft copolymers in aqueous solution were investigated by transmittance, (1)H NMR, dynamic light scattering (DLS), and so on. For the pH-induced micellization, the P4VP side chains collapse to form the core of the micelles, and the HPC backbones stay in the shell to stabilize the micelles. In the case of thermoinduced micellization, the HPC backbones collapse to form the core of the micelles that was stabilized by the P4VP side chains in the shell upon heating. What's more, the cloud point of the HPC-g-P4VP copolymers in the aqueous solution could be finely tuned by changing the length of P4VP side chains or the pH values. In acidic water, the longer the side chains, the higher the cloud point. For those HPC-g-P4VP copolymers with short side chains, for example, HPC0.05-g-P4VP(3), the lower pH correlates a higher cloud point. The thermo- or pH-induced micelles also have the pH- or thermosensitivity due to their P4VP or HPC shells.