Environment-friendly dual-network hydrogel dust suppressant based on xanthan gum, polyvinyl alcohol and acrylic acid

Self-adhesive, freeze-tolerant, and strong hydrogel electrolyte containing xanthan gum enables the high-performance of zinc-ion hybrid supercapacitors

Hydrogel electrolyte is an ideal candidate material for flexible energy storage devices due to its excellent softness and conductivity properties. However, challenges such as the inherent mechanical weakness, the susceptibility to be frozen in low-temperature environments, and the insufficiency of hydrogel-electrode contact persist. Herein, a "Multi in One" strategy is employed to effectively conquer these difficulties by endowing hydrogels with high strength, freeze-resistance, and self-adhesive ability. Multiple hydrogen bond networks and ion crosslinking networks are constructed within the hydrogel electrolyte (PVA/PAAc/XG) containing polyvinyl alcohol (PVA), acrylic acid (AAc), and xanthan gum (XG), promoting the enhanced mechanical property, and the adhesion to electrode materials is also improved through abundant active groups. The introduction of zinc ions provides the material with superior frost resistance while also promoting electrical conductivity. Leveraging its multifunction of superior mechanical strength, anti-freeze property, and self-adhesive characteristic, the PVA/PAAc/XG hydrogel electrolyte is employed to fabricate zinc ion hybrid supercapacitors (ZHS). Remarkably, ZHS exhibits outstanding electrochemical performance and cycle stability. A remarkable capacity retention rate of 83.86 % after 10,000 charge-discharge cycles can be achieved at high current densities, even when the operational temperature decreases to -60 °C, showing great potential in the field of flexible energy storage devices.

Development and characterization of a high efficiency bio-based rhamnolipid compound dust suppressant for coal dust pollution control

Surfactants make a significant contribution to the suppression of coal dust fly in underground coal mines, but are hazardous to the environment and human health. It is therefore crucial to develop more environmentally friendly and efficient wetting agents using non-polluting eco-friendly surfactants. In this study, the wetting properties of the biosurfactant rhamnolipid were investigated and the rhamnolipid composite wetting agent (CS-A-S) was prepared by mixing design after preferring different surfactants by means of experiments and quantum mechanical simulations. The dust suppression properties were compared by means of infrared spectroscopy, scanning electron microscopy and molecular dynamics simulation. The results showed that the critical micelle concentration (CMC) of rhamnolipid was 0.04 wt% and the surface tension was 25.9 mN/m, which had the basis to become an underground dust suppressant; the surface tension of CS-A-S was reduced to 23.95 mN/m and the contact angle to coal dust was 25°; after spraying CS-A-S, the median particle size of coal dust reached 125.76 μm, an increase of 849.13%; the specific surface area was reduced to 2.24 m²/g, a decrease of 51.06%; the oxygen-containing groups on the coal surface increased by 55.87-246.7%, making it easier to form hydrogen bonds, the coal dust became more hydrophilic, and coal dust particles easily agglomerated into larger sizes and settled rapidly under gravity; the CS-A-S simulated system showed the greatest degree of water molecule penetration, with a minimum of 71 Å, and a water molecule diffusion coefficient of 1.06 Ų/ps, a decrease of 75%, and the interaction energy with coal molecules is 155.6 kcal/mol, an increase of 66.9%, making it easier for the dust suppressant molecules to form adsorption on the coal surface, showing a better dust suppression effect.

Dual-network polyvinyl alcohol/polyacrylamide/xanthan gum ionic conductive hydrogels for flexible electronic devices

Ionic conductive hydrogels (ICHs) have received widespread attention as an ideal candidate for flexible electronic devices. However, conventional ICHs failed in widespread applications due to their inability to simultaneously possess high toughness, high ionic conductivity, and anti-freezing properties. Here, polyvinyl alcohol (PVA) and polyacrylamide (PAAm) were first dissolved in the zinc chloride solution, in which zinc ions (Zn²⁺) act as ionic cross-linkers and conducting ions, followed by the introduction of xanthan gum (XG) with a unique structure of trisaccharide side chains into the PVA/PAAm semi-interpenetrating network to prepare a dual-network ICHs (refers as PPXZ). Enabled by the synergistic effect of intermolecular chemical covalent cross-linking and physical cross-linking, PPXZ hydrogels exhibit significantly improved mechanical properties without sacrificing electrical conductivity. Furthermore, PPXZ hydrogels are successfully applied to flexible electronic devices, such as strain sensors and zinc ion hybrid supercapacitors, exhibiting satisfactory sensing sensitivity and cycling stability at a wide temperature range, respectively. Even at a high current density (10 A g^-1), the capacity of the supercapacitor retains 88.24 % after 10,000 cycles. This strategy provides new insight for ICHs in wide temperature-applied flexible electronic devices.

A study on the adsorption property and mechanism of β-cyclodextrin/polyvinyl alcohol/polyacrylic acid hydrogel for ciprofloxacin

Polyvinyl alcohol (PVA), acrylic acid (AA), and β-cyclodextrin (β-CD) were used as monomers, and ammonium persulfate was used as an initiator. Orthogonal tests were optimized the experimental condition, and aqueous polymerization was used to prepare poly-β-cyclodextrin/polyvinyl alcohol/polyacrylic acid (β-CD/PVA/PAA) hydrogel. The samples were characterized by FT-IR (Fourier transform infrared), SEM (Scanning electron microscopy), and XRD (X-ray diffraction). β-CD/PVA/PAA hydrogel was analyzed, which influenced external environmental factors on the β-CD/PVA/PAA hydrogel adsorption performance, and the kinetic behavior of β-CD/PVA/PAA hydrogel on ciprofloxacin (CIP) adsorption was explored. The results concluded that the prepared β-CD/PVA/PAA hydrogel has a well-defined three-dimensional network structure. The decrease in the pH of the CIP solution and the adsorption temperature reduces the adsorption reaction of β-CD/PVA/PAA hydrogel on CIP. The kinetics of CIP adsorption by β-CD/PVA/PAA hydrogel confirmed the pseudo-second-order kinetic model (R 2 > 0.997), the maximum equilibrium adsorption amounts is 372.12 mg/g, the removal rate reaches 74.42%. The adsorption process was mainly chemisorption, the adsorption isotherm fits the Freundlich adsorption isotherm model (R 2 > 0.946), and the adsorption process was heterogeneous with multi-molecular layer adsorption. The adsorption process inclined more toward the adsorption of inhomogeneous multi-molecular layers. The β-CD/PVA/PAA hydrogel retained 80% adsorption properties after three adsorption-desorption under optimal conditions.

Tunable Properties via Composition Modulations of Poly(vinyl alcohol)/Xanthan Gum/Oxalic Acid Hydrogels

The design of hydrogel networks with tuned properties is essential for new innovative biomedical materials. Herein, poly(vinyl alcohol) and xanthan gum were used to develop hydrogels by the freeze/thaw cycles method in the presence of oxalic acid as a crosslinker. The structure and morphology of the obtained hydrogels were investigated by means of scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and swelling behavior. The SEM analysis revealed that the surface morphology was mostly affected by the blending ratio between the two components, namely, poly(vinyl alcohol) and xanthan gum. From the swelling study, it was observed that the presence of oxalic acid influenced the hydrophilicity of blends. The hydrogels based on poly(vinyl alcohol) without xanthan gum led to structures with a smaller pore diameter, a lower swelling degree in pH 7.4 buffer solution, and a higher elastic modulus. The antimicrobial activity of the prepared hydrogels was tested and the results showed that the hydrogels conferred antibacterial activity against Gram positive bacteria (Staphylococcus aureus 25923 ATCC) and Gram negative bacteria (Escherichia coli 25922 ATCC).

High lignin containing hydrogels with excellent conducting, self-healing, antibacterial, dye adsorbing, sensing, moist-induced power generating and supercapacitance properties

Herein, we design a dynamic redox system of using high contents of lignosulfonate (LS) and Al³⁺ to prepare poly acrylic acid (PAA) (LS-g-PAA-Al) hydrogels. The presence of high LS and Al³⁺ contents, in combination with the effective Al³⁺ complexes formed, renders the resultant hydrogel with some unique attributes, including excellent ionic conductivity (as high as 7.38 S·m^-1) and antibacterial activity; furthermore, a very fast gelation (in 1 min) was obtained. As a flexible strain sensor, the LS-g-PAA-Al hydrogel with high conductivity demonstrates superior sensitivity in human movement detection. In addition, the rich anionic hydrophilic groups, such as sulfonic groups, phenolic hydroxyl groups, in the hydrogels impart the resultant hydrogels with excellent adsorption capacity for cationic dyes: when using Rhodamine B (RB) as a model cationic dye, the adsorption capacity of the resultant hydrogel reaches 334.64 mg·g^-1; as a moist-induced power generator, it generates maximum 150.5 mV open circuit voltage with moist air flow. When the hydrogel electrolyte is assembled into a supercapacitor assembly, it shows high specific capacitance of 245.4 F·g^-1, with the maximum energy density of 21.8 Wh·kg^-1, power density of 2.37 kW·kg^-1, and capacitance retention of 95.1% after 5000 consecutive charge-discharge cycles.

The Effect of Alcohol Compound on the Solidification of Magnesium Oxysulfate Cement-Boron Mud Blends

At present, the utilization of boron resources in China is increasing, and the problem of boron tailing pollution is becoming increasingly serious. To fundamentally solve the problem of boron tailing, many scholars at home and abroad have mainly studied the curing effect in terms of compressive strength, and little research has been carried out into the solidification effect and hydration products. This study explored the effects of adding different alcohol-based modifiers on the hydration products of magnesium oxysulfate cement-boron mud mixture, the microstructure, physical properties and curing effects of the samples. The results show that magnesium oxysulfate cement is beneficial to the solidification of boron in boron mud due to its low-alkali. Adding an alcohol-based modifier can increase the compressive strength of magnesium oxysulfate cement-boron mud blends. After adding acrylic acid and D-Mannitol, the 28-day compressive strength of the sample increased by 44.7 MPa. The blending of alcohol-based modifiers has a very good effect on the curing of boron in the whole system.