Distribution of PAHs, PCBs, and PCDD/Fs in products from full-scale relevant pyrolysis of diverse contaminated organic waste

A systematic review of biochar aging and the potential eco-environmental risk in heavy metal contaminated soil

Biochar is widely accepted as a green and effective amendment for remediating heavy metals (HMs) contaminated soil, but its long-term efficiency and safety changes with biochar aging in fields. Currently, some reviews have qualitatively summarized biochar aging methods and mechanisms, aging-induced changes in biochar properties, and often ignored the potential eco-environmental risk during biochar aging process. Therefore, this review systematically summarizes the study methods of biochar aging, quantitatively compares the effects of different biochar aging process on its properties, and discusses the potential eco-environmental risk due to biochar aging in HMs contaminated soil. At present, various artificial aging methods (physical aging, chemical aging and biological aging) rather than natural field aging have been applied to study the changes of biochar's properties. Generally, biochar aging increases specific surface area (SSA), pore volume (PV), surface oxygen-containing functional group (OFGs) and O content, while decreases pH, ash, H, C and N content. Chemical aging method has a greater effect on the properties of biochar than other aging methods. In addition, biochar aging may lead to HMs remobilization and produce new types of pollutants, such as polycyclic aromatic hydrocarbons (PAHs), environmentally persistent free radicals (EPFRs) and colloidal/nano biochar particles, which consequently bring secondary eco-environmental risk. Finally, future research directions are suggested to establish a more accurate assessment method and model on biochar aging behavior and evaluate the environmental safety of aged biochar, in order to promote its wider application for remediating HMs contaminated soil.

Co-pyrolysis of fly ash with sewage sludge for PCDD/F removal

Fly ash generated from municipal waste incineration (MWI) contains various toxic substances, and it has to be properly treated before disposal or reuse. Water washing and thermal pyrolysis can improve the destruction efficiency of PCDD/Fs in fly ash generated from municipal solid waste incinerators. Since sulfur oxides and nitrogen compounds generated by the heating of the sewage sludge poison the catalytic active sites for PCDD/Fs formation on fly ash surface, co-pyrolysis of fly ash with sewage sludge effectively inhibits precursor formation and de novo synthesis reaction, resulting in the great reduction of PCDD/F formation. The results of the pyrolysis at 350 °C show that the PCDD/Fs removal efficiencies based on mass concentration are over 99%. The results at 350 °C of different reaction times show that the reaction time of 10 min is sufficient to reach the European End of Waste criteria (≤ 20 pg TEQ/g) when the ratio of fly ash/sewage sludge is controlled at 1:1.

Practical strategies of phosphorus reclamation from sewage sludge after different thermal processing: Insights into phosphorus transformation

In the context of circular economy and global shortage of phosphorus (P) fertilizer production, it is crucial to effectively recover P during the treatment and disposal of sewage sludge (SS). Although thermal treatment of SS has been widely applied, a targeted P reclamation route is not yet well established. This study has comprehensively investigated and compared the physicochemical properties of SS and solid residues (hydrochar (HC), biochar (BC), sewage sludge ash (SSA), hydrochar ash (HCA), and biochar ash (BCA)) after application of three typical thermal treatment techniques (i.e., hydrothermal carbonization (180‒240 °C), pyrolysis (400‒600 °C) and combustion (850 ℃). P speciation and transformation during thermal processes were extensively explored followed by a rational proposal of effective P reclamation routes. Specifically, thermal processing decomposed organic P and converted non-apatite P to apatite P. Orthophosphate-P was found to be the main species in all samples. Physicochemical properties of the resulting thermal-derived products were significantly affected by the thermal techniques applied, thereby determining their feasibility for different P reclamation purposes. In particular, ash is not recommended for agricultural use due to higher harmful metals content, while acid leaching can be an alternative solution to synthesize non-Fe-containing P products because of the lower co-dissolved Fe content in the leachate. HC and BC offer the option for synthesis of Fe containing products. Eventually, HC and BC demonstrate great potential for agriculture application, however, a comprehensive risk assessment should be conducted before their real-world applications.

Formation mechanisms and degradation methods of polycyclic aromatic hydrocarbons in biochar: A review

Biochar has been widely used in soil amendment and environmental remediation. Polycyclic aromatic hydrocarbons (PAHs) could be produced in preparation of biochar, which may pose potential risks to the environment and human health. At present, most studies focus on the ecotoxicity potential of biochar, while there are few systematic reviews on the formation mechanisms and mitigation strategies of PAHs in biochar. Therefore, a systematical understanding of the distribution, formation mechanisms, risk assessment, and degradation approaches of PAHs in biochar is highly needed. In this paper, the distribution and content of the total and bioavailable PAHs in biochar are reviewed. Then the formation mechanisms, influencing factors, and potential risk assessment of PAHs in biochar are systematically explored. After that, the effective strategies to alleviate PAHs in biochar are summarized. Finally, suggestions and perspectives for future studies are proposed. This review provides a guide for reducing the formation of biochar-associated PAHs and their toxicity, which is beneficial for the development and large-scale safe use of environmentally friendly biochar.

Facile heteroatoms modification biochar production from mahogany (Swietenia macrophylla King) pericarps for enhanced the suppression of polycyclic aromatic hydrocarbon pollutants

Polycyclic aromatic hydrocarbons (PAHs) are critical environmental concerns due to their intrinsic toxic aromatic nature and concomitant circumstances that potentially harm the ecological and human health. In this study, converting mahogany (Swietenia macrophylla King) pericarps to value-added biochar by pyrolysis for evaluating the potential formation/destruction of biochar-bound PAHs was studied for the first time. This study designed and optimized the thermal processing conditions at 300-900 °C in the CO2 or N2 atmosphere, and heteroatoms (N, O, B, NB, and NS) were modified for mahogany pericarps biochar (MPBC) production. The MPBC500 exhibited significantly higher pyrolysis products of PAHs (2780 ± 38 ng g-1) than that of MPBC900 (78 ± 6 ng g-1) under N2 without introducing modified elements. Specifically, the inhibition capacity of MPBC500 for PAHs under CO2 was improved most efficiently by the active nitrogen species of the pyridinic N and pyrrolic N groups. The pyrolysis conditions and heteroatom modification of MPBC altered its physicochemical properties, that is, aromaticity and hydrophobicity, affecting the PAH concentration and composition in the pyrolysis products. This study reveals sustainable approaches to reduce the environmental footprint of biochar by focusing on increases in PAHs pollution in sustainable biochar produced from a low-carbon bioeconomy perspective.

Properties of Poultry-Manure-Derived Biochar for Peat Substitution in Growing Media

Peat is considered a contentious input in horticulture. Therefore, there is a search for suitable alternatives with similar properties that can be used for partial or complete peat substitution in growing media. Poultry-manure-derived biochar (PMB) is considered such an alternative. This study aimed at determining the properties of PMBs obtained through pyrolysis at selected temperatures and assessing their potentials to substitute peat in growing media based on the selected properties. The scope included the laboratory-scale pyrolysis of poultry manure at the temperatures of 425-725 °C; the determination of selected physico-chemical and physical properties of the obtained biochars, including the contaminants; and the assessment of the potentials of produced biochars to be used as peat substitutes. PMBs contained less than 36% of total organic carbon (TOC). The contents of P and K were about 2.03-3.91% and 2.74-5.13%, respectively. PMBs did not retain N. They can be safely used as the concentrations of heavy metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinatd biphenyls (PCBs), dioxins, and furans are within the permissible values (except for Cr). Due to high pH (9.24-12.35), they can have a liming effect. High water holding capacity (WHC) in the range of 158-232% w/w could allow for the maintenance of moisture in the growing media. PMBs obtained at 525 °C, 625 °C, and 725 °C showed required stability (H/Corg < 0.7).