Qualitative and quantitative assessment of condylar displacement after orthognathic surgery: A voxel-based three-dimensional analysis

Enhancing skeletal stability and Class III correction through active orthodontist engagement in virtual surgical planning: A voxel-based 3-dimensional analysis

INTRODUCTION

Skeletal stability after bimaxillary surgical correction of Class III malocclusion was investigated through a qualitative and quantitative analysis of the maxilla and the distal and proximal mandibular segments using a 3-dimensional voxel-based superimposition among virtual surgical predictions performed by the orthodontist in close communication with the maxillofacial surgeon and 12-18 months postoperative outcomes.

METHODS

A comprehensive secondary data analysis was conducted on deidentified preoperative (1 month before surgery [T1]) and 12-18 months postoperative (midterm [T2]) cone-beam computed tomography scans, along with virtual surgical planning (VSP) data obtained by Dolphin Imaging software. The sample for the study consisted of 17 patients (mean age, 24.8 ± 3.5 years). Using 3D Slicer software, automated tools based on deep-learning approaches were used for cone-beam computed tomography orientation, registration, bone segmentation, and landmark identification. Colormaps were generated for qualitative analysis, whereas linear and angular differences between the planned (T1-VSP) and observed (T1-T2) outcomes were calculated for quantitative assessments. Statistical analysis was conducted with a significance level of α = 0.05.

RESULTS

The midterm surgical outcomes revealed a slight but significantly less maxillary advancement compared with the planned position (mean difference, 1.84 ± 1.50 mm; P = 0.004). The repositioning of the mandibular distal segment was stable, with insignificant differences in linear (T1-VSP, 1.01 ± 3.66 mm; T1-T2, 0.32 ± 4.17 mm) and angular (T1-VSP, 1.53° ± 1.60°; T1-T2, 1.54° ± 1.50°) displacements (P >0.05). The proximal segments exhibited lateral displacement within 1.5° for both the mandibular right and left ramus at T1-VSP and T1-T2 (P >0.05).

CONCLUSIONS

The analysis of fully digital planned and surgically repositioned maxilla and mandible revealed excellent precision. In the midterm surgical outcomes of maxillary advancement, a minor deviation from the planned anterior movement was observed.

Evaluating changes in the condylar head after orthognathic surgery with or without articular disc repositioning: a systematic review

Failures in orthognathic surgery are associated with different factors, including those related to untreated or undiagnosed preoperative temporomandibular joint (TMJ) disorders. This systematic review aimed to assess potential alterations in the condylar head following orthognathic surgery. A systematic search for randomised controlled trials and retrospective studies was performed. For inclusion in the review, studies had to meet the following eligibility criteria according to the PICO framework: Patients: patients with orthognathic deformity and temporomandibular dysfunction (or temporomandibular osteoarthritis); Intervention: patients submitted to orthognathic surgery concomitantly with TMJ disjunction; Control: patients undergoing only orthognathic surgery with or without presurgical data; and Outcome: changes in temporomandibular joint position and volume. Nine studies met all the inclusion criteria and were selected for qualitative analysis. The results of this review show that simultaneous articular disc repositioning and orthognathic surgery provide better results in patients with preoperatively diagnosed condylar osteoarthritic changes. In conclusion, condylar remodelling (resorption/deposition) and its extent are determined by the direction of condylar displacement during surgery. Other factors such as age are also associated with the development of condylar resorption.

Volumetric changes in temporomandibular joint space following trans-oral vertical ramus osteotomy in patients with mandibular prognathism: a one-year follow-up study

This study measured and analyzed chronological changes in temporomandibular joint space volume by compartment following transoral vertical ramus osteotomy (TOVRO) using reconstructed 3-dimensional (3D) images of patients with mandibular prognathism. It included 70 joints of 35 patients who underwent TOVRO between January 2018 and December 2021. Computed tomography (CT) or cone-beam CT (CBCT) was performed before surgery (T0) and at 3 days (T1), 6 months (T2), and 12 months postoperatively (T3). These scans were then analyzed using 3D software. The volumes of the overall (Vjs), anterior (Vajs), posterior (Vpjs), medial (Vmjs), and lateral (Vljs) joint spaces were calculated at each time point. A linear mixed model and repeated-measures covariance pattern with unstructured covariance were used to evaluate significant changes in joint space volume over time. Vjs significantly increased to 134.54 ± 34.28 mm3 at T3 compared to T0 (p < 0.001). Vpjas and Vljs increased by 130.72 ± 10.07 mm3 and 109.98 ± 7.52 mm3 at T3 compared to T0, respectively (p < 0.001). However, no significant difference was observed between T0 and T2 in Vajs and Vmjs (p = 0.9999). The observed volume increases in Vpjs and Vljs appeared to contribute to the overall Vjs increase.

Panoramic Radiography vs. CBCT in the Evaluation of the Maxillary Third Molar Roots

Background and Objectives: A comprehensive understanding of the position of third molar roots and adjacent structures, such as the maxillary sinus (MS), is essential for safe extractions. Diagnostic imaging plays a fundamental role in achieving accurate treatment planning. This study aimed to compare panoramic radiography (PR) and cone-beam computed tomography (CBCT) for the evaluation of maxillary third molar roots and their relationship with the MS. Materials and Methods: Two trained radiologists evaluated third molar images. The number of roots, morphology (fused/conical, divergent, dilacerated, or atypical), and their relationship with the MS in PR and CBCT were registered. Descriptive and inferential statistics were performed using the weighted Kappa test. Results: Regarding the number and morphology of the roots, Kappa values showed moderate (κ = 0.42) and fair agreement (κ = 0.38), respectively. Regarding the proximity with the MS, most of the roots showed close contact (30.6%), or 1/3 of root superimposition (35%), in PR evaluation, while in CBCT, the third molars were in contact with the MS floor (32%), and with alveolar domes (27.2%). Conclusions: PR is a moderately reliable image technique to identify the number of roots and root morphology of maxillary third molars. PR, however, does not provide any radiographic signs that clearly indicate the anatomical relationship between the maxillary third molar roots and the maxillary sinus detected in CBCT images.

Recommendations for standard criteria for the positional and morphological evaluation of temporomandibular joint osseous structures using cone-beam CT: a systematic review

OBJECTIVE

This systematic review aimed to appraise the reliability and comprehensiveness of imaging methods in studies that used three-dimensional assessment of the temporomandibular joint (TMJ) in order to propose a standardized imaging method.

METHODS

Six databases/search engines were searched up until September 2022. The outcomes of interest included measurements of the mandibular condyle, glenoid fossa, joint spaces, or the entire TMJ. Two checklists were utilized: one to assess the risk of bias, with a maximum score of 37, and the other, a pre-designed checklist consisting of 22 items to evaluate the comprehensiveness of the methods used, with a maximum score of 33.

RESULTS

Out of the 2567 records retrieved, only 14 studies, which used cone bean computed tomography (CBCT), were deemed eligible and thus included in the qualitative analysis. Three studies were deemed of low risk of bias, while the remaining studies were rated as moderate to high risk of bias, primarily due to improper reporting of inter-observer agreement, varying reliability values, and a limited number of cases included in the reliability analysis. Regarding the comprehensiveness of the methods used, only four studies achieved relatively high scores. The deficiencies observed were related to the reporting of variables such as slice thickness and voxel size, absence of or improper reporting of intra- and inter-examiner reliability analyses, and failure to assess all osseous components of the TMJ.

CONCLUSION

CBCT-based methods used to assess the positions and morphology of TMJ bony structures appear to be imperfect and lacking in comprehensiveness. Hence, criteria for a standardized assessment method of these TMJ structures are proposed.

CLINICAL RELEVANCE STATEMENT

Accurately, comprehensively, and reliably assessing the osseous structures of the temporomandibular joint will provide valid and valuable diagnostic features of the normal temporomandibular joint, and help establish potential associations between these osseous features and temporomandibular disorders.

REGISTRATION

The protocol for this systematic review was registered at the International Prospective Register of Systematic Reviews (PROSPERO, No.: CRD42020199792).

KEY POINTS

•Although many methods have been introduced to assess the osseous structure of the temporomandibular joint, they yielded inconsistent findings. •None of the published studies comprehensively assessed the temporomandibular joint. •Recommendations for a comprehensive temporomandibular joint osseous assessment method were suggested for better validity and reliability of future research.

Effects of Occlusal Splints on Spinal Posture in Patients with Temporomandibular Disorders: A Systematic Review

There is still a gap in the scientific knowledge on the linkage between craniofacial structure and spinal postural control in temporomandibular disorder (TMD) patients. This systematic review aimed to assess the role of occlusal splints on spinal posture of TMD patients. PubMed, Web of Science, and Scopus were systematically searched from inception until 5 January 2022 to identify observational studies with a longitudinal study design presenting: patients with diagnosis of TMD according to the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD); occlusal splint therapy as intervention; postural assessment as outcome. Out of 133 records identified, 104 were suitable for data screening, and only 7 articles were included satisfying the eligibility criteria. We found that occlusal splints might have a positive effect on posture in TMD patients, albeit there is little evidence of appropriate investigation for postural assessment. This systematic review suggested that the occlusal splint might be considered a non-invasive therapeutic approach for patients with TMD. However, the low number of studies with high-quality methodology in these patients showed an urgent need for further research using combined force platform stabilometry and kinematic evaluation of the spine to investigate the impact of occlusal splints on posture.