Exploration of catalytic and cytotoxicity activities of CaxMgxNi1-2xFe2O4 nanoparticles

Biocompatibility and colorectal anti-cancer activity study of nanosized BaTiO3 coated spinel ferrites

In the present work, different nanoparticles spinel ferrite series (MFe2O4, Co0.5M0.5Fe2O4; M = Co, Mn, Ni, Mg, Cu, or Zn) have been obtained via sonochemical approach. Then, sol-gel method was employed to design core-shell magnetoelectric nanocomposites by coating these nanoparticles with BaTiO3 (BTO). The structure and morphology of the prepared samples were examined by X-ray powder diffraction (XRD), scanning electron microscope (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscope (HR-TEM), and zeta potential. XRD analysis showed the presence of spinel ferrite and BTO phases without any trace of a secondary phase. Both phases crystallized in the cubic structure. SEM micrographs illustrated an agglomeration of spherical grains with nonuniformly diphase orientation and different degrees of agglomeration. Moreover, HR-TEM revealed interplanar d-spacing planes that are in good agreement with those of the spinel ferrite phase and BTO phase. These techniques along with EDX analyses confirmed the successful formation of the desired nanocomposites. Zeta potential was also investigated. The biological influence of (MFe2O4, CoMFe) MNPs and core-shell (MFe2O4@BTO, CoMFe@BTO) magnetoelectric nanocomposites were examined by MTT and DAPI assays. Post 48 h of treatments, the anticancer activity of MNPs and MENCs was investigated on human colorectal carcinoma cells (HCT-116) against the cytocompatibility of normal non-cancerous cells (HEK-293). It was established that MNPs possess anti-colon cancer capability while MENCs exhibited a recovery effect due to the presence of a protective biocompatible BTO layer. RBCs hemolytic effect of NPs has ranged from non- to low-hemolytic effect. This effect that could be attributed to the surface charge from zeta potential, also the CoMnFe possesses the stable and lowest zeta potential in comparison with CoFe2O4 and MnFe2O4 also to the protective effect of shell. These findings open up wide prospects for biomedical applications of MNPs as anticancer and MENCs as promising drug nanocarriers.

Synthesis of metal anthranilate complexes: catalytic and antipathogenic studies

Background

Anthranilic acid is an active compound with diverse biological activities such as anti-inflammatory, antineoplastic, anti-malarial and α-glucosidase inhibitory properties. It can also chelate transition metals to form complexes with applications as antipathogens, photoluminescent materials, corrosion inhibitors, and catalysts.

Results

Anthranilic acid complexes (1–10) of Zn(II), Bi(III), Ag(I), Fe(II), Co(II), Cu(II), Mn(II), Al, Ni(II), and Cr(III) were synthesized and characterized using thermogravimetric (TGA), elemental analysis, FT-IR, UV–vis spectrometry, mass spectrometry and magnetic susceptibility. The morphology and size of metal complex (1–10) particles were determined by scanning electron microscope (SEM) and the surface area was determined by BET analysis. TGA and CHN analysis data indicated that the stoichiometries of complexes were 1:2 metal/ligand except for Ag(I), Al and Bi. Furthermore, DFT study was performed to optimize the structure of selected complexes. The complexes (1–10) were evaluated for their catalytic activity in the reduction of 4-nitrophenol (4-NP), antibacterial activity against S. aureus, P. aeroginosa and E. coli as well as their antifungal activity against F. solani and A. niger. The complexes were also tested against the second-stage juveniles (J₂) root-knot nematodes.

Conclusion

Co(II) complex 5 and Cu(II) complex 6 showed high catalytic activity for the reduction of 4-NP to 4-aminophenol (4-AP). Ag(I) complex 3 showed the best activity against the pathogens that were tested namely clinically important bacteria S. aureus, P. aeroginosa and E. coli, commercially important fungi F. solani and A. niger and J₂ root-knot nematodes M. javanica.

Spinel ferrites (MFe2O4): Synthesis, improvement and catalytic application in environment and energy field

To develop efficient catalysts is one of the major ways to solve the energy and environmental problems. Spinel ferrites, with the general chemical formula of MFe₂O₄ (where M = Mg²⁺, Co²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Mn²⁺, etc.), have attracted considerable attention in catalytic research. The flexible position and valence variability of metal cations endow spinel ferrites with diverse physicochemical properties, such as abundant surface active sites, high catalytic activity and easy to be modified. Meanwhile, their unique advantages in regenerating and recycling on account of the magnetic performances facilitate their practical application potential. Herein, the conventional as well as green chemistry synthesis of spinel ferrites is reviewed. Most importantly, the critical pathways to improve the catalytic performance are discussed in detail, mainly covering selective doping, site substitution, structure reversal, defect introduction and coupled composites. Furthermore, the catalytic applications of spinel ferrites and their derivative composites are exclusively reviewed, including Fenton-type catalysis, photocatalysis, electrocatalysis and photoelectro-chemical catalysis. In addition, some vital remarks, including toxicity, recovery and reuse, are also covered. Future applications of spinel ferrites are envisioned focusing on environmental and energy issues, which will be pushed by the development of precise synthesis, skilled modification and advanced characterization along with emerging theoretical calculation.

Nickel carcinogenesis mechanism: cell cycle dysregulation

Nickel (Ni) is a widely distributed metal in the environment and an important pollutant due to its widespread industrial applications. Ni has various toxicity in humans and experimental animals, including carcinogenicity. However, the carcinogenic effects of Ni remain troublesome. Cell cycle dysregulation may be an important carcinogenic mechanism and is also a potential molecular mechanism for Ni complexes anti-cancerous effects. Therefore, we conducted a literature review to summarize the effects of Ni on cell cycle. Up to now, there were three different reports on Ni-induced cell cycle arrest: (i) Ni can induce cell cycle arrest in G0/G1 phase, phosphorylation and degradation of IkappaB kinase-alpha (IKKα)-dependent cyclin D1 and phosphoinositide-3-kinase (PI3K)/serine-threonine kinase (Akt) pathway-mediated down-regulation of expressions of cyclin-dependent kinases 4 (CDK4) play important role in it; (ii) Ni can induce cell cycle arrest in S phase, but the molecular mechanism is not known; (iii) G2/M phase is the target of Ni toxicity, and Ni compounds cause G2/M cell cycle phase arrest by reducing cyclinB1/Cdc2 interaction through the activation of the ataxia telangiectasia mutated (ATM)-p53-p21 and ATM-checkpoint kinase inhibitor 1 (Chk1)/Chk2-cell division cycle 25 (Cdc25) pathways. Revealing the mechanisms of cell cycle dysregulation associated with Ni exposure may help in the prevention and treatment of Ni-related carcinogenicity and toxicology.

Sonochemical synthesis and physical properties of Co0.3Ni0.5Mn0.2EuxFe2-xO4 nano-spinel ferrites

Nanoparticles (NPs) of composition Co_0.3Ni_0.5Mn_0.2Eu_xFe_2-xO₄, where 0.00 ≤ x ≤ 0.10 (hereafter called CNMEuF) were synthesized by sonochemical approach using UZ SONOPULS HD 2070 ultrasonic homogenizer (frequency of 20 kHz and power of 70 W). As-synthesized samples were characterized thoroughly to determine the effects of europium ions (Eu³⁺) substitution on their structure, morphology and magnetic traits. Structural analyses of the synthesized NPs confirmed their high purity and crystalline cubic phases. Percent diffuse reflectance (%DR) data and Kubelka-Munk theory were exploited to evaluate the optical band gap energies of the studied CNMEuF NPs. Values of optical band gap energies obtained from the Tauc plots were observed in the range of 1.47-1.58 eV. The hysteresis loops (at room temperature and 10 K) of synthesized NPs were analyzed to determine their magnetic properties. These NPs disclosed superparamagnetic and hard ferrimagnetic character at room temperature and 10 K, respectively. With exception, the sample with x = 0.10 revealed soft ferrimagnetic behavior at 10 K. Eu³⁺ doping was shown to have significant influence on the structure and magnetic attributes of the proposed CNMEuF NPs. Values of various magnetic parameters of proposed compositions were reduced with the increase in Eu³⁺ dopant contents.

Structural, magnetic, optical properties and cation distribution of nanosized Co0.7Zn0.3TmxFe2-xO4 (0.0 ≤ x ≤ 0.04) spinel ferrites synthesized by ultrasonic irradiation

This study expressed the influence of Tm substitution on the structural, optical and magnetic properties of Co-Zn spinel ferrites (Co_0.7Zn_0.3Tm_xFe_2-xO₄ (0.0 ≤ x ≤ 0.04)). The different compositions were synthesized by sonochemical method using Qsonica ultrasonic homogenizer, frequency: 20 kHz and power: 70 W for 60 min. XRD patterns proved the presence of single-phase spinel ferrites with crystallites size in the 8-10 nm range. Cation distribution approved the occupancy of octahedral (B) site by Tm. The morphology and the elements stoichiometry are obtainable through FE-SEM, EDX and elemental mapping. Optical band gap (E_g) values were estimated via DR % (percent diffuse reflectance) investigations and Kubelka-Munk theory. Tauc plots revealed that direct E_g values are ranging between 1.49 and 1.68 eV. The analyses of magnetization versus magnetic field, M(H), were performed. The following magnetic parameters like saturation magnetization M_s, squareness ratio (SQR = M_r/M_s), magnetic moment n_B, coercivity H_c and remanence M_r have been evaluated. M(H) curves revealed the superparamagnetic (SP) at RT and ferromagnetic property at 10 K. It was showed that the Tm³⁺ substitutions significantly affect the magnetic properties of host spinel ferrites. An increasing trend in the M_s, M_r, H_c, and n_B values was noticed for lower Tm³⁺ substitution content.