Bimetallic assembly of Fe(III) doped ZnO as an effective nanoantibiotic and its ROS independent antibacterial mechanism

Biodegradation of waste cooking oil and simultaneous production of rhamnolipid biosurfactant by Pseudomonas aeruginosa P7815 in batch and fed-batch bioreactor

Biosurfactants are non-toxic, surface-active biomolecules capable of reducing surface tension (ST) and emulsifying interface at a comparably lower concentration than commercial surfactants. Yet, poor yield, costlier substrates, and complex cultivation processes limit their commercial applications. This study focuses on producing biosurfactants by Pseudomonas aeruginosa P7815 in batch and fed-batch bioreactor systems using waste cooking oil (WCO) as the sole carbon source. The batch study showed a 92% of WCO biodegradation ability of P. aeruginosa producing 11 g L^-1 of biosurfactant. To enhance this biosurfactant production, a fed-batch oil feeding strategy was opted to extend the stationary phase of the bacterium and minimize the effects of substrate deprivation. An enhanced biosurfactant production of 16 g L^-1 (i.e. 1.5 times of batch study) was achieved at a feed rate of 5.7 g L^-1d^-1 with almost 94% of WCO biodegradation activity. The biosurfactant was characterized as rhamnolipid using Fourier transform infrared spectroscopy (FTIR), and its interfacial characterization showed ST reduction to 29 ± 1 mN m^-1 and effective emulsification stability at pH value of 4, temperature up to 40 °C and salinity up to 40 g L^-1. The biosurfactant exhibited antibacterial activity with minimum inhibitory concentration (MIC) values of 100 µg mL^-1 and 150 µg mL^-1 for pathogenic E. hirae and E. coli, respectively. These findings suggest that biodegradation of WCO by P. aeruginosa in a fed-batch cultivation strategy is a potential alternative for the economical production of biosurfactants, which can be further explored for biomedical, cosmetics, and oil washing/recovery applications.

Recent advances in functionalized nanomaterials for the diagnosis and treatment of bacterial infections

The growing problem of resistant infections due to antibiotic misuse is a worldwide concern that poses a grave threat to healthcare systems. Thus, it is necessary to discover new strategies to combat infectious diseases. In this review, we provide a selective overview of recent advances in the use of nanocomposites as alternatives to antibiotics in antimicrobial treatments. Metals and metal oxide nanoparticles (NPs) have been associated with inorganic and organic supports to improve their antibacterial activity and stability as well as other properties. For successful antibiotic treatment, it is critical to achieve a high drug concentration at the infection site. In recent years, the development of stimuli-responsive systems has allowed the vectorization of antibiotics to the site of infection. These nanomaterials can be triggered by various mechanisms (such as changes in pH, light, magnetic fields, and the presence of bacterial enzymes); additionally, they can improve antibacterial efficacy and reduce side effects and microbial resistance. To this end, various types of modified polymers, lipids, and inorganic components (such as metals, silica, and graphene) have been developed. Applications of these nanocomposites in diverse fields ranging from food packaging, environment, and biomedical antimicrobial treatments to diagnosis and theranosis are discussed.

Anti-pathogenic activity of graphene nanomaterials: A review

Graphene and its derivatives are promising candidates for a variety of biological applications, among which, their anti-pathogenic properties are highly attractive due to the outstanding physicochemical characteristics of these novel nanomaterials. The antibacterial, antiviral and antifungal performances of graphene are increasingly becoming more important due to the pathogen's resistance to existing drugs. Despite this, the factors influencing the antibacterial activity of graphene nanomaterials, and consequently, the mechanisms involved are still controversial. This review aims to systematically summarize the literature, discussing various factors that affect the antibacterial performance of graphene materials, including the shape, size, functional group and the electrical conductivity of graphene flakes, as well as the concentration, contact time and the pH value of the graphene suspensions used in related microbial tests. We discuss the possible surface and edge interactions between bacterial cells and graphene nanomaterials, which cause antibacterial effects such as membrane/oxidative/photothermal stresses, charge transfer, entrapment and self-killing phenomena. This article reviews the anti-pathogenic activity of graphene nanomaterials, comprising their antibacterial, antiviral, antifungal and biofilm-forming performance, with an emphasis on the antibacterial mechanisms involved.

A comparative investigation of normal and inverted exchange bias effect for magnetic fluid hyperthermia applications

Exchange bias (EB) of magnetic nanoparticles (MNPs) in the nanoscale regime has been extensively studied by researchers, which have opened up a novel approach in tuning the magnetic anisotropy properties of magnetic nanoparticles (MNPs) in prospective application of biomedical research such as magnetic hyperthermia. In this work, we report a comparative study on the effect of magnetic EB of normal and inverted core@shell (CS) nanostructures and its influence on the heating efficiency by synthesizing Antiferromagnetic (AFM) NiO (N) and Ferrimagnetic (FiM) Fe3O4 (F). The formation of CS structures for both systems is clearly authenticated by XRD and HRTEM analyses. The magnetic properties were extensively studied by Vibrating Sample Magnetometer (VSM). We reported that the inverted CS NiO@Fe3O4 (NF) MNPs have shown a greater EB owing to higher uncompensated spins at the interface of the AFM, in comparison to the normal CS Fe3O4@NiO (FN) MNPs. Both the CS systems have shown higher SAR values in comparison to the single-phased F owing to the EB coupling at the interface. However, the higher surface anisotropy of F shell with more EB field for NF enhanced the SAR value as compared to FN system. The EB coupling is hindered at higher concentrations of NF MNPs because of the enhanced dipolar interactions (agglomeration of nanoparticles). Both the CS systems reach to the hyperthermia temperature within 10 min. The cyto-compatibility analysis resulted in the excellent cell viability (> 75%) for 3 days in the presence of the synthesized NPs upto 1 mg/ml. These observations endorsed the suitability of CS nanoassemblies for magnetic fluid hyperthermia applications.

Production of biosurfactant by Bacillus subtilis RSL-2 isolated from sludge and biosurfactant mediated degradation of oil

This study aims to unveil the effect of biosurfactant as stimulant in crude oil bioremediation. Isolated oil-degrading strain, B. subtilis RSL 2 was optimized for the maximum oil degradation and biosurfactant production using Response surface methodology. The produced biosurfactant was characterized and investigated for its effect on microbial oil degradation in two modes (a) sequential and (b) simultaneous. The strain produced 3.5 g/L of biosurfactant at pH 4.0, 25 °C, using 1 g/L crude oil as the only C-source in 7 days, which was characterized as lipopeptide with a critical micelle concentration (CMC) of 0.5 g/L. The biosurfactant improved surface wettability of a hydrophobic substrate i.e. increased surface energy from 30 ± 1 to 35 ± 1 mJ/m². Further, the simultaneous feed of biosurfactant at 0.5 CMC enhanced oil biodegradation (72%) and biosurfactant production (5.2 g/L) by about 1.6 times than the sequential mode due to improvement in mobilization of oil thus making it more bioavailable.

Photobiomodulation (450 nm) alters the infection of periodontitis bacteria via the ROS/MAPK/mTOR signaling pathway

We aimed to investigate the effects of photobiomodulation (PBM) on periodontitis. A periodontitis model was established via Porphyromonas gingivalis infection in beagles. Mandibular second and third premolars were removed, and implants were positioned immediately after tooth extraction. Left gingiva was irradiated with PBM (450 nm) as the LG group, and right side without irradiation was regarded as the CG (control) group. PBM treatment increased oxidative stress by increasing the levels of reactive oxygen species (ROS) and reactive nitrogen species (RNS). The elevated levels of H₂O₂ (a biomarker of oxidative stress) and the free radicals (NO^• and O₂^•-) reduced the concentration of dominant pathogens and regulated ROS/RNS/AMP-activated protein kinase (AMPK)/mTOR pathway by affecting p-AMPK, Runt-related transcription factor 2 (RUNX2), p-c-Jun N-terminal kinase (JNK)/mammalian target of rapamycin (mTOR), and acetyl-CoA carboxylase 1 (ACC1). PBM therapy increased salivary levels of interleukin-1 receptor antagonist (IL-1ra), interleukin (IL)-10, total antioxidant capacity (TAC) and catalase (CAT), and reduced the levels of tumor necrosis factor (TNF)α and interleukin (IL)-1β, malondialdehyde (MDA) and 8-hydroxydeoxyguanosine (8-OHdG) (p < 0.05). All the results contributed to preventing periodontitis infection. PBM therapy improved bone mineral density and implant osseointegration by controlling dominant pathogens invasion via the upregulation of salivary anti-inflammatory and antioxidant defense by affecting ROS/RNS/AMPK/mTOR signaling pathway.