Cage-like metallasilsesquioxanes in catalysis: A review

A Family of Hexacopper Phenylsilsesquioxane/Acetate Complexes: Synthesis, Solvent-Controlled Cage Structures, and Catalytic Activity

Convenient self-assembly synthesis of copper(II) complexes via double (phenylsilsesquioxane and acetate) ligation allows to isolate a family of impressive sandwich-like cage compounds. An intriguing feature of these complexes is the difference in the structure of a pair of silsesquioxane ligands despite identical (Cu6) nuclearity and number (four) of acetate fragments. Formation of particular combination of silsesquioxane ligands (cyclic/cyclic vs condensed/condensed vs cyclic/condensed) was found to be dependent on the synthesis/crystallization media. A combination of Si4-cyclic and Si6-condensed silsesquioxane ligands is a brand new feature of cage metallasilsesquioxanes. A representative Cu6-complex (4) (with cyclic silsesquioxanes) exhibited high catalytic activity in the oxidation of alkanes and alcohols with peroxides. Maximum yield of the products of cyclohexane oxidation attained 30 %. The compound 4 was also tested as catalyst in the Baeyer-Villiger oxidation of cyclohexanone by m-chloroperoxybenzoic acid: maximum yields of 88 % and 100 % of ϵ-caprolactone were achieved upon conventional heating at 50 °C for 4 h and MW irradiation at 70 or 80 °C during 30 min, respectively. It was also possible to obtain the lactone (up to 16 % yield) directly from the cyclohexane via a tandem oxidation/Baeyer-Villiger oxidation reaction using the same oxidant.

Fe(III)-Based Phenylsilsesquioxane/Acetylacetonate Complexes: Synthesis, Cage-like Structure, and High Catalytic Activity

Unprecedented iron-based silsesquioxane/acetylacetonate complexes were synthesized. The intriguing cage-like structure of compounds is alkaline metal-dependent: the Fe2Li2 complex includes condensed Si6-silsesquioxane and four acetylacetonate ligands; the Fe4Na4 complex exhibits two cyclic Si4-silsesquioxane and eight acetylacetonate ligands, while the Fe3K3 complex features two cyclic Si3-silsesquioxane and six acetylacetonate ligands. The latter case is the very first observation of small trimeric silsesquioxane ligands in the composition of cage-like metallasilsesquioxanes. The Fe4Na4-based complex exhibits a record high activity in the oxidation of inert alkanes with peroxides (55% yield of oxygenates in cyclohexane oxidation). It also acts as a catalyst in the cycloaddition of CO2 with epoxides, leading to cyclic carbonates in good yields (58-96%).

A Family of Cagelike Mn-Silsesquioxane/Bathophenanthroline Complexes: Synthesis, Structure, and Catalytic and Antifungal Activity

This study reports a novel family of cage manganesesilsesquioxanes prepared via complexation with bathophenanthroline (4,7-diphenyl-1,10-phenanthroline). The resulting Mn4-, Mn6Li2-, and Mn4Na-compounds exhibit several unprecedented cage metallasilsesquioxane structural features, including intriguing self-assembly of silsesquioxane ligands. Complexes were tested in vitro for fungicidal activity against seven classes of phytopathogenic fungi. The representative Mn4Na-complex acts as a catalyst in the cycloaddition of CO2 to epoxides under solvent-free conditions to form cyclic carbonates in good yields.

Cage-like Cu5Cs4-Phenylsilsesquioxanes: Synthesis, Supramolecular Structures, and Catalytic Activity

A small family of nonanuclear Cu5Cs4-based phenylsilsesquioxanes 1-2 were prepared by a convenient self-assembly approach and characterized by X-ray diffraction studies. The compounds 1 and 2 show some unprecedented structural features such as the presence of a [Ph14Si14O28]14- silsesquioxane ligand and a CuII5CsI4 nuclearity in which the metal cations occupy unusual positions within the cluster. Copper ions are "wrapped" into a silsesquioxane matrix, while cesium ions are located in external positions. This resulted in cesium-involved aggregation of coordination polymer structures. Both compounds 1 and 2 realize specific metallocene (cesium-phenyl) linkage between neighboring cages. Compound 2 is evaluated as a catalyst in the Baeyer-Villiger (B-V) oxidation of cyclohexanone and tandem cyclohexane oxidation/B-V oxidation of cyclohexanone with m-chloroperoxybenzoic acid (mCPBA) as an oxidant, in an aqueous acetonitrile medium, and HNO3 as the promoter. A quantitative yield of ε-caprolactone was achieved under conventional heating at 50 °C for 4 h or MW irradiation for 30 min (for cyclohexanone as substrate); 17 and 19% yields of lactone upon MW irradiation at 80 °C for 30 min and heating at 50 °C for 4 h, respectively (for cyclohexane as a substrate), were achieved. Complex 2 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with peroxides at 60 °C in acetonitrile. The maximum yield of cyclohexane oxidation products was 30%. Complex 2 exhibits high activity in the oxidation of alcohols.

Catalyzing Benzoxazine Polymerization with Titanium-Containing POSS to Reduce the Curing Temperature and Improve Thermal Stability

Trisilanolphenyl-polyhedral oligomeric silsesquioxane titanium (Ti-Ph-POSS) was synthesized through the corner-capping reaction, and Ti-Ph-POSS was dispersed in benzoxazine (BZ) to prepare Ti-Ph-POSS/PBZ composite materials. Ti-Ph-POSS could catalyze the ring-opening polymerization (ROP) of BZ and reduce the curing temperature of benzoxazine. In addition, Ti immobilized on the Ti-Ph-POSS cage could form covalent bonds with the N or O atoms on polybenzoxazine, improving the thermal stability of PBZ. The catalytic activity of the Ti-Ph-POSS/BZ mixtures was assessed and identified through ¹H nuclear magnetic resonance (¹H-NMR) and Fourier-transform infrared (FTIR) analyses, while thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA) were used to determine the thermal properties of the composite. It was found that PBZ exhibited a higher glass transition temperature (T_g) and better thermal stability when Ti-Ph-POSS was added. The curing behavior of the Ti-Ph-POSS/BZ mixtures showed that the initial (T_i) and peak (T_p) curing temperatures sharply decreased as the content of Ti-Ph-POSS and the heating rate increased. The curing kinetics of these Ti-Ph-POSS/BZ systems were analyzed using the Kissinger method, and the morphology of Ti-Ph-POSS/PBZ was determined via scanning electron microscopy (SEM). It was found that the Ti-Ph-POSS particles were well distributed in the composites. When the content exceeded 2 wt%, several Ti-Ph-POSS particles could not react with benzoxazine and were only dispersed within the PBZ matrix, resulting in aggregation of the Ti-Ph-POSS molecules.

Cagelike Octacopper Methylsilsesquioxanes: Self-Assembly in the Focus of Alkaline Metal Ion Influence-Synthesis, Structure, and Catalytic Activity

A family of unusual octacopper cage methylsilsesquioxanes 1-4 were prepared and characterized. Features of their cagelike (prismatic) structure were established using X-ray diffraction studies. Effects of distortion of prismatic cages 1-4 due to variation of (i) additional alkaline metal ions (K, Rb, or Cs), (ii) combination of solvating ligands, and (iii) nature of encapsulating species were found. Opportunities for the design of supramolecular 1D extended structures were found. These opportunities are based on (i) formate linkers between copper centers (in the case of Cu₈K₂-based compound 2) or (ii) crown ether-like contacts between cesium ions and siloxane cycles (in the case of Cu₈Cs₂-based compound 4). Cu₈Cs₂-complex 4 was evaluated in the catalysis of alkanes and alcohols. Complex 4 exhibits high catalytic activity. The yield of cyclohexane oxidation products is 35%. The presence of nitric acid is necessary as a co-catalyst. The oxidation of alcohols with the participation of complex 4 as a catalyst and tert-butyl hydroperoxide as an oxidizer also proceeds in high yields of up to 98%.

Hybrid Silsesquioxane/Benzoate Cu(7)-Complexes: Synthesis, Unique Cage Structure, and Catalytic Activity

A series of phenylsilsesquioxane-benzoate heptacopper complexes 1-3 were synthesized and characterized by X-ray crystallography. Two parallel routes of toluene spontaneous oxidation (into benzyl alcohol and benzoate) assisted the formation of the cagelike structure 1. A unique multi-ligation of copper ions (from (i) silsesquioxane, (ii) benzoate, (iii) benzyl alcohol, (iv) pyridine, (v) dimethyl-formamide and (vi) water ligands) was found in 1. Directed self-assembly using benzoic acid as a reactant afforded complexes 2-3 with the same main structural features as for 1, namely heptanuclear core coordinated by (i) two distorted pentameric cyclic silsesquioxane and (ii) four benzoate ligands, but featuring other solvate surroundings. Complex 3 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with hydrogen peroxide and tert-butyl hydroperoxide, respectively, at 50 °C in acetonitrile. The maximum yield of cyclohexane oxidation products as high as 32% was attained. The oxidation reaction results in a mixture of cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone. Upon the addition of triphenylphosphine, the cyclohexyl hydroperoxide is completely converted to cyclohexanol. The specific regio- and chemoselectivity in the oxidation of n-heptane and methylcyclohexane, respectively, indicate the involvement of of hydroxyl radicals. Complex 3 exhibits a high activity in the oxidation of alcohols.

A Novel Family of Cage-like (CuLi, CuNa, CuK)-phenylsilsesquioxane Complexes with 8-hydroxyquinoline Ligands: Synthesis, Structure, and Catalytic Activity

The first examples of metallasilsesquioxane complexes, including ligands of the 8-hydroxyquinoline family 1–9, were synthesized, and their structures were established by single crystal X-ray diffraction using synchrotron radiation. Compounds 1–9 tend to form a type of sandwich-like cage of Cu₄M₂ nuclearity (M = Li, Na, K). Each complex includes two cisoid pentameric silsesquioxane ligands and two 8-hydroxyquinoline ligands. The latter coordinates the copper ions and corresponding alkaline metal ions (via the deprotonated oxygen site). A characteristic (size) of the alkaline metal ion and a variation of characteristics of nitrogen ligands (8-hydroxyquinoline vs. 5-chloro-8-hydroxyquinoline vs. 5,7-dibromo-8-hydroxyquinoline vs. 5,7-diiodo-8-hydroxyquinoline) are highly influential for the formation of the supramolecular structure of the complexes 3a, 5, and 7–9. The Cu₆Na₂-based compound 2 exhibits high catalytic activity towards the oxidation of (i) hydrocarbons by H₂O₂ activated with HNO₃, and (ii) alcohols by tert-butyl hydroperoxide. Studies of kinetics and their selectivity has led us to conclude that it is the hydroxyl radicals that play a crucial role in this process.

Synthesis of Novel Luminescent Double-Decker Silsesquioxanes Based on Partially Condensed TetraSilanolPhenyl POSS and Tb3+/Eu3+ Lanthanide Ions

In this study, novel lanthanide-containing double-decker polyhedral oligomeric silsesquioxanes (POSS) were prepared by combining the partially condensed TetraSilanolPhenyl POSS with terbium (Tb3+) and europium (Eu3+) ions. This open-cage POSS possesses four diametrically opposite silanol groups that are able to coordinate, under mild conditions, different luminescent ions through a simple corner-capping method. The two metal-containing POSS functionalized with Tb3+ and with an equimolar combination of Tb3+ and Eu3+ show a completely condensed structure with different luminescent properties. Their emission features depend on the chemical nature of the metal ions incorporated in the framework. An improved stokes shift was detected in the bimetallic compound containing both the Tb3+ and Eu3+ ions, promoted by the occurrence of a Tb3+→Eu3+ energy transfer mechanism. These characteristics identify this metal-functionalized silica platform as a potential candidate for the development of novel luminescent devices.

Cage-like manganesesilsesquioxanes: features of their synthesis, unique structure, and catalytic activity in oxidative amidations

A family of Mn-based cage-like silsesquioxanes (and complexes with 1,10-phenanthroline) exhibits unique types of molecular architectures and catalytic activity in oxidative amidation reactions.

Temperature sensing in Tb3+/Eu3+-based tetranuclear silsesquioxane cages with tunable emission

New luminescent cage-like tetranuclear silsesquioxanes [NEt₄][(Ph₄Si₄O₈)₂(Tb₃Eu)(NO₃)₄(OH)(EtOH)₃(H₂O)]·4(EtOH) (1) and [NEt₄]₂[(Ph₄Si₄O₈)₂(Tb₂Eu₂)(NO₃)₆(EtOH)₂(MeCN)₂]·4(MeCN) (2) present a tunable thermosensitive Tb³⁺-to-Eu³⁺ energy transfer driven by Tb³⁺ and Eu³⁺ emission and may be used as temperature sensors operating in the range 41–100 °C with excellent linearity (R² = 0.9990) and repeatability (>95%). The thermometer performance was evidenced by the maximum relative sensitivity of 0.63% °C⁻¹ achieved at 68 °C.

Tetranuclear silsesquioxane cages with tunable thermosensitive Tb³⁺-to-Eu³⁺ energy transfer were used for temperature sensing based on the Tb³⁺-to-Eu³⁺ emission intensity ratio (LIR) with excellent linearity and sensitivity.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity

This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu₆ cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu₈-based (6 and 7) and Cu₆-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu₆ cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C₅-C₈ cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

Polysiloxanes Grafted with Mono(alkenyl)Silsesquioxanes-Particular Concept for Their Connection

Herein, a facile and efficient synthetic route to unique hybrid materials containing polysiloxanes and mono(alkyl)silsesquioxanes as their pendant modifiers (T₈@PS) was demonstrated. The idea of this work was to apply the hydrosilylation reaction as a tool for the efficient and selective attachment of mono(alkenyl)substituted silsesquioxanes (differing in the alkenyl chain length, from -vinyl to -dec-9-enyl and types of inert groups iBu, Ph at the inorganic core) onto two polysiloxanes containing various amount of Si-H units. The synthetic protocol, determined and confirmed by FT-IR in situ and NMR analyses, was optimized to ensure complete Si-H consumption along with the avoidance of side-products. A series of 20 new compounds with high yields and complete β-addition selectivity was obtained and characterized by spectroscopic methods.

New Luminescent Tetranuclear Lanthanide-Based Silsesquioxane Cage-Like Architectures

The synthesis, structure, magnetic, and luminescence properties investigations of four new cage-like lanthanide-based silsesquioxanes (Cat)₂ [(PhSiO_1.5 )₈ (LnO_1.5 )₄ (O)(NO_2.5 )₆ (EtOH)₂ (MeCN)₂ ] (where Cat⁺ =Et₄ N⁺ , PPh₄ P⁺ and Ln³⁺ =Eu³⁺ , Tb³⁺ and (Ph₄ P)₄ [(PhSiO_1.5 )₈ (TbO_1.5 )₄ (O)₂ (NO_2.5 )₈ ]⋅10MeCN are reported. They present an unusual prism-like topology of cage architectures and lanthanide-characteristic emission, which makes them the first luminescent cage-like lanthanide silsesquioxanes. One of the Tb³⁺ -based cages presents a magnetic spin-flip transition.

Preparation of Tri(alkenyl)functional Open-Cage Silsesquioxanes as Specific Polymer Modifiers

The scientific reports on polyhedral oligomeric silsesquioxanes are mostly focused on the formation of completely condensed T₈ cubic type structures and recently so-called double-decker derivatives. Herein, we report on efficient synthetic routes leading to trifunctionalized, open-cage silsesquioxanes with alkenyl groups of varying chain lengths from -vinyl to -dec-9-enyl and two types of inert groups (iBu, Ph) at the silsesquioxane core. The presented methodology was focused on hydrolytic condensation reaction and it enabled obtaining titled compounds with high yields and purity. A parallel synthetic methodology that was based on the hydrosilylation reaction was also studied. Additionally, a thorough characterization of the obtained compounds was performed, also in terms of their thermal stability, melting and crystallization temperatures (TGA and DSC) in order to show the changes in the abovementioned parameters dependent on the type of reactive as well as inert groups at Si-O-Si core. The presence of unsaturated alkenyl groups has a profound impact on the application potential of these systems, i.e., as modifiers or comonomers for copolymerization reaction.

A modified hybrid silsesquioxane/histidine composite for copper and zinc adsorption and it behavior in the electro-oxidation of ascorbic acid

Octa-(3-chloropropryl)silsesquioxane was chemically modified with histidine (SSQ-H) and characterized by spectroscopy in the infrared region (FT-IR), X-ray diffraction (XRD), X-ray Dispersive Energy Spectroscopy (EDX), Scanning Electron Microscopy (SEM). The analytical properties of SSQ-H were tested regarding of Cu²⁺ and Zn²⁺ adsorption and as an electrochemical sensor for the detection of ascorbic acid. The metal sorption results indicate that maximum amount of Cu²⁺ and Zn²⁺ adsorbed (Nf_max) were 1.58 × 10^-3 and 5.67 × 10^-4 mol g^-1, respectively. After Cu²⁺ and Zn²⁺ ion adsorption and interaction with potassium hexacyanoferrate (III), the investigated materials displayed electroactivity for ascorbic acid detection. The anodic peak currents responses of a graphite paste electrode containing CuHCFSSQ-H presented a linear response in the concentration range of 4.0 × 10^-4 to 4.0 × 10^-3 mol L^-1 for ascorbic acid detection. The limit of detection was of 2.99 × 10^-4 mol L^-1, with an amperometric sensitivity of 1.69 μA/mol L^-1. The intensity of the anodic peak currents of the graphite paste electrode containing ZnHCFSSQ-H in the concentration range of 9.0 × 10^-5 to 9.0 × 10^-4 mol L^-1 also displayed a linear response. The limit of detection was of 6.76 × 10^-5 mol L^-1, with an amperometric sensitivity of 0.0206 A/mol L^-1.

Cage-like silsesquioxanes-based hybrid materials

Cage-like silsesquioxanes are considered to be ideal and versatile building blocks of hybrid materials due to their unique structures and excellent performance. This Perspective highlights recent advances in the field of cage-like silsesquioxane-based hybrid materials, ranging from monomer functionalization and materials preparation to application. The existing issues are reviewed and the challenges and prospects in this field are also discussed for further development and exploitation.

Mild C-H functionalization of alkanes catalyzed by bioinspired copper(ii) cores

Three new copper(ii) coordination compounds formulated as [Cu(H_1.5bdea)₂](hba)·2H₂O (1), [Cu₂(μ-Hbdea)₂(aca)₂]·4H₂O (2), and [Cu₂(μ-Hbdea)₂(μ-bdca)]_n (3) were generated by aqueous medium self-assembly synthesis from Cu(NO₃)₂, N-butyldiethanolamine (H₂bdea) as a main N,O-chelating building block and different carboxylic acids [4-hydroxybenzoic (Hhba), 9-anthracenecarboxylic (Haca), or 4,4'-biphenyldicarboxylic (H₂bdca) acid] as supporting carboxylate ligands. The structures of products range from discrete mono- (1) or dicopper(ii) (2) cores to a 1D coordination polymer (3), and widen a family of copper(ii) coordination compounds derived from H₂bdea. The obtained compounds were applied as bioinspired homogeneous catalysts for the mild C-H functionalization of saturated hydrocarbons (cyclic and linear C₅-C₈ alkanes). Two model catalytic reactions were explored, namely the oxidation of hydrocarbons with H₂O₂ to a mixture of alcohols and ketones, and the carboxylation of alkanes with CO/S₂O₈^2- to carboxylic acids. Both processes proceed under mild conditions with a high efficiency and the effects of different parameters (e.g., reaction time and presence of acid promoter, amount of catalyst and solvent composition, substrate scope and selectivity features) were studied and discussed in detail. In particular, an interesting promoting effect of water was unveiled in the oxidation of cyclohexane that is especially remarkable in the reaction catalyzed by 3, thus allowing a potential use of diluted, in situ generated solutions of hydrogen peroxide. Moreover, the obtained values of product yields (up to 41% based on alkane substrate) are very high when dealing with the C-H functionalization of saturated hydrocarbons and the mild conditions of these catalytic reactions (50-60 °C, H₂O/CH₃CN medium). This study thus contributes to an important field of alkane functionalization and provides a notable example of new Cu-based catalytic systems that can be easily generated by self-assembly from simple and low-cost chemicals.

New Cu4Na4- and Cu5-Based Phenylsilsesquioxanes. Synthesis via Complexation with 1,10-Phenanthroline, Structures and High Catalytic Activity in Alkane Oxidations with Peroxides in Acetonitrile

Self-assembly of copper(II)phenylsilsesquioxane assisted by the use of 1,10-phenanthroline (phen) results in isolation of two unusual cage-like compounds: (PhSiO1,5)12(CuO)4(NaO0.5)4(phen)4 1 and (PhSiO1,5)6(PhSiO1,5)7(HO0.5)2(CuO)5(O0.25)2(phen)3 2. X-Ray diffraction study revealed extraordinaire molecular architectures of both products. Namely, complex 1 includes single cyclic (PhSiO1,5)12 silsesquioxane ligand. Four sodium ions of 1 are additionally ligated by 1,10-phenanthrolines. In turn, “sodium-less” complex 2 represents coordination of 1,10-phenanthrolines to copper ions. Two silsesquioxane ligands of 2 are: (i) noncondensed cubane of a rare Si6-type and (ii) unprecedented Si7-based ligand including two HOSiO1.5 fragments. These silanol units were formed due to removal of phenyl groups from silicon atoms, observed in mild conditions. The presence of phenanthroline ligands in products 1 and 2 favored the π–π stacking interactions between neighboring cages. Noticeable that in the case of 1 all four phenanthrolines participated in such supramolecular organization, unlike to complex 2 where one of the three phenanthrolines is not “supramolecularly active”. Complexes 1 and 2 were found to be very efficient precatalysts in oxidations with hydroperoxides. A new method for the determination of the participation of hydroxyl radicals has been developed.

Tetracopper(II) Cores Driven by an Unexplored Trifunctional Aminoalcohol Sulfonic Acid for Mild Catalytic C–H Functionalization of Alkanes

Three new tetracopper(II) coordination compounds were easily generated from Cu(NO3)2, a trifunctional aminoalcohol sulfonic acid (H3bes, N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid) as a principal building block, and a benzene carboxylic acid as a supporting ligand (i.e., benzoic (Hba), 4-hydroxybenzoic (Hfba), or 3-hydroxybenzoic (Hthba) acid). The obtained microcrystalline products, [Cu4(µ-Hbes)3(µ-H2bes)(µ-L)]·2H2O (L = ba− (1), fhba− (2), and thba− (3)), were fully characterized by FTIR (Fourier-transform infrared spectroscopy), elemental analysis, ESI-MS (Electrospray Ionisation Mass Spectrometry), and single-crystal X-ray diffraction methods. Compounds 1–3 were applied as effective homogeneous catalysts in the oxidative C−H functionalization of alkanes (cycloalkanes and propane). Two different model reactions were explored: (1) mild oxidation of alkanes with hydrogen peroxide to give alcohols and ketones, and (2) mild carboxylation of alkanes with carbon monoxide, water, and potassium peroxodisulfate to give carboxylic acids. For these reactions, effects of different parameters, as well as mechanistic and selectivity characteristics, were studied.

Space Craft-like Octanuclear Co(II)-Silsesquioxane Nanocages: Synthesis, Structure, Magnetic Properties, Solution Behavior, and Catalytic Activity for Hydroboration of Ketones

Two novel space craft-like octanuclear Co(II)-silsesquioxane nanocages, {Co₈[(MeSiO₂)₄]₂(dmpz)₈} (SD/Co8a) and {Co₈[(PhSiO₂)₄]₂(dmpz)₈} (SD/Co8b) (SD = SunDi; Hdmpz = 3,5-dimethylpyrazole), have been constructed from two similar multidentate silsesquioxane ligands assisted with a pyrazole ligand. The Co₈ skeleton consists of eight tetrahedral Co(II) ions arranged in a ring and is further capped by two (MeSiO₂)₄ ligands up and down. The auxiliary dmpz^- ligands seal the ring finally. Electrospray ionization mass spectrometry revealed SD/Co8a and SD/Co8b are highly stable in CH₂Cl₂. Magnetic analysis implies that SD/Co8a announces antiferromagnetic interactions between Co(II) ions. Moreover, both of them display good homogeneous catalytic activity for hydroboration of ketones in the presence of pinacolborane under mild conditions.

Palanquin-Like Cu4Na4 Silsesquioxane Synthesis (via Oxidation of 1,1-bis(Diphenylphosphino)methane), Structure and Catalytic Activity in Alkane or Alcohol Oxidation with Peroxides

The self-assembly synthesis of copper-sodium phenylsilsesquioxane in the presence of 1,1-bis(diphenylphosphino)methane (dppm) results in an unprecedented cage-like product: [(PhSiO1,5)6]2[CuO]4[NaO0.5]4[dppmO2]2 1. The most intriguing feature of the complex 1 is the presence of two oxidized dppm species that act as additional O-ligands for sodium ions. Two cyclic phenylsiloxanolate (PhSiO1,5)6 ligands coordinate in a sandwich manner with the copper(II)-containing layer of the cage. The structure of 1 was established by X-ray diffraction analysis. Complex 1 was shown to be a very good catalyst in the oxidation of alkanes and alcohols with hydrogen peroxide or tert-butyl hydroperoxide in acetonitrile solution. Thus, cyclohexane (CyH), was transformed into cyclohexyl hydroperoxide (CyOOH), which could be easily reduced by PPh3 to afford stable cyclohexanol with a yield of 26% (turnover number (TON) = 240) based on the starting cyclohexane. 1-Phenylethanol was oxidized by tert-butyl hydroperoxide to give acetophenone in an almost quantitative yield. The selectivity parameters of the oxidation of normal and branched alkanes led to the conclusion that the peroxides H2O2 and tert-BuOOH, under the action of compound (1), decompose to generate the radicals HO• and tert-BuO• which attack the C-H bonds of the substrate.

Interplay between H-bonding and interpenetration in an aqueous copper(ii)-aminoalcohol-pyromellitic acid system: self-assembly synthesis, structural features and catalysis

Two new copper(ii) coordination compounds, [Cu(H1.5mdea)2]2(H2pma) (1a) and [{Cu2(μ-Hmdea)2}2(μ4-pma)]n·2nH2O (1b), were self-assembled at different temperatures from the same multicomponent reaction system, comprising copper(ii) nitrate, N-methyldiethanolamine (H2mdea), pyromellitic acid (H4pma), and potassium hydroxide. Products 1a and 1b were isolated as microcrystalline solids and fully characterized and their structures were established by single-crystal X-ray diffraction. Compound 1a features the bis-aminoalcohol(ate) monocopper(ii) units and H2pma2- anions that are multiply interconnected by strong H-bonds into a firm 2D H-bonded layer. Compound 1b reveals the bis-aminoalcoholate dicopper(ii) motifs that are interlinked by the μ4-pma4- spacers into a 3D + 3D interpenetrated metal-organic framework. From a topological perspective, both networks of 1a and 1b are uninodal and driven by similar 4-connected H2pma2- or pma4- nodes, but result in distinct sql and dia topologies, respectively. Compound 1a was applied as an efficient catalyst for two model cycloalkane functionalization reactions: (1) oxidation by H2O2 to form cyclic alcohols and ketones and (2) hydrocarboxylation by CO/H2O and S2O82- to form cycloalkanecarboxylic acids. The substrate scope, effects of various reaction parameters, selectivity and mechanistic features were also investigated.

Synthesis of Monofunctionalized Silsesquioxanes (RSiMe2 O)(iBu)7 Si8 O12 via Alkene Hydrosilylation

The research presented in this work comprehensively describes hydrosilylation of a wide spectrum of alkenes which contain one or more reactive groups with (HSiMe₂ O)(iBu)₇ Si₈ O₁₂ , in the presence of different types of catalysts. Special attention is paid to the influence of alkene, catalyst, and reaction conditions on process effectiveness and selectivity by the precise monitoring of the experiments with in situ FTIR and NMR spectroscopies. More than twenty silsesquioxanes bearing reactive groups (OH, Br, NR₂ , CO, COOR, NCO, epoxy, SiR₃ ) commonly used in organic and polymer chemistry, were obtained, isolated and characterized by ¹ H, ¹³ C, ²⁹ Si NMR and MALDI TOF. Importantly, in the presented syntheses, commercially available reagents and catalysts were used, meaning that the presented methods could be easily repeated, rapidly scaled up, and widely applied.

New Ni4Na2-phenylgermsesquioxane architecture: synthesis, structure and slow dynamic behaviour

The first Ni(ii)-based germaniumsesquioxane cage compound [(PhGeO_1.5)₁₀(NiO)₄(NaO_0.5)₂] presents a unique sandwich-like structure and exhibits slow dynamics of the magnetization.

Oxidative functionalization of C–H compounds induced by the extremely efficient osmium catalysts (a review)

In recent years, osmium complexes have found applications not only in thecis-hydroxylation of olefins but also very efficient in the oxygenation of C–H compounds (saturated and aromatic hydrocarbons and alcohols) by hydrogen peroxide as well as organic peroxides.

Facile synthesis and bridgehead-functionalization of bicyclo[3.3.3]pentasiloxanes

Various bicyclo[3.3.3]pentasiloxanes (BPSO) were successfully synthesized via regioselective functionalization at the bridgehead positions.

Si10Cu6N4 Cage Hexacoppersilsesquioxanes Containing N Ligands: Synthesis, Structure, and High Catalytic Activity in Peroxide Oxidations

The synthesis, composition, and catalytic properties of a new family of hexanuclear Cu(II)-based phenylsilsesquioxanes are described here. Structural studies of 17 synthesized compounds revealed the general principle underlying their molecular topology: viz., a central metal oxide layer consisting of two Cu₃ trimers is coordinated by two cyclic [PhSiO_1.5]₅ siloxanolate ligands to form a skewed sandwich architecture with the composition [(PhSiO_1.5)₁₀(CuO)₆]²⁺. In addition to this O ligation by the siloxanolate rings, two opposite copper ions are additionally coordinated by the nitrogen atoms of corresponding N ligand(s), such as 2,2'-bipyridine (compounds 1-9), 1,10-phenanthroline (compounds 10-13), mixed 1,10-phenanthroline/2,2'-bipyridine (compound 14), or bathophenanthroline (compounds 15-17). Finally, the charge balance is maintained by two HO^- (compounds 1-7, 10-13, and 15-17), two H₃CO^- (compound 8), or two CH₃COO^- (compounds 9 and 14) anions. Complexes 1 and 10 exhibited a high activity in the oxidative amidation oxidation of alcohols. Compounds 1, 10, and 15 are very efficient homogeneous catalysts in the oxidation of alkanes and alcohols with peroxides.

Family of Polynuclear Nickel Cagelike Phenylsilsesquioxanes; Features of Periodic Networks and Magnetic Properties

A new family of bi-, tetra-, penta-, and hexanickel cagelike phenylsilsesquioxanes 1-6 was obtained by self-assembly and transmetalation procedures. Their crystal structures were established by single-crystal X-ray analysis, and features of crystal packing relevant to the network formation were studied by a topological analysis. Compounds 1, 2, and 4 are isolated architectures, while 3, 5, and 6 present extended 1D and 3D networks. The investigation of magnetic properties revealed the presence of ferro- (1 and 3-5) or antiferromagnetic (2 and 6) interactions between Ni(II) ions, giving rise in the most cases (1, 2, and 4-6) to the presence of a slow relaxation of the magnetization, which can originate from the spin frustration.

Rare Earth Doped Silica Nanoparticles via Thermolysis of a Single Source Metallasilsesquioxane Precursor

Rare earth metal doped silica nanoparticles have significant advantages over traditional organic dyes and quantum dots. Silsesquioxanes are promising precursors in the production of silica nanoparticles by thermolysis, due to their structural similarities with silica materials. This manuscript describes the production of a new Eu3+-based metallasilsesquioxane species and its use as a single source precursor in the thermolytic production of luminescent rare earth metal doped silica nanoparticles with characteristic emission in the visible region of the spectrum.