Thermal and UV aging of polypropylene stabilized by wine seeds wastes and their extracts

Improvement of the Thermo-Oxidative Stability of Biobased Poly(butylene succinate) (PBS) Using Biogenic Wine By-Products as Sustainable Functional Fillers

Biobased poly(butylene succinate) (PBS) represents one promising sustainable alternative to petroleum-based polymers. Its sensitivity to thermo-oxidative degradation is one reason for its limited application. In this research, two different varieties of wine grape pomaces (WPs) were investigated as fully biobased stabilizers. WPs were prepared via simultaneous drying and grinding to be used as bio-additives or functional fillers at higher filling rates. The by-products were characterized in terms of composition and relative moisture, in addition to particle size distribution analysis, TGA, and assays to determine the total phenolic content and the antioxidant activity. Biobased PBS was processed with a twin-screw compounder with WP contents up to 20 wt.-%. The thermal and mechanical properties of the compounds were investigated with DSC, TGA, and tensile tests using injection-molded specimens. The thermo-oxidative stability was determined using dynamic OIT and oxidative TGA measurements. While the characteristic thermal properties of the materials remained almost unchanged, the mechanical properties were altered within expected ranges. The analysis of the thermo-oxidative stability revealed WP as an efficient stabilizer for biobased PBS. This research shows that WP, as a low-cost and biobased stabilizer, improves the thermo-oxidative stability of biobased PBS while maintaining its key properties for processing and technical applications.

Recent Advances in Development of Waste-Based Polymer Materials: A Review

Limited petroleum sources, suitable law regulations, and higher awareness within society has caused sustainable development of manufacturing and recycling of polymer blends and composites to be gaining increasing attention. This work aims to report recent advances in the manufacturing of environmentally friendly and low-cost polymer materials based on post-production and post-consumer wastes. Sustainable development of three groups of materials: wood polymer composites, polyurethane foams, and rubber recycling products were comprehensively described. Special attention was focused on examples of industrially applicable technologies developed in Poland over the last five years. Moreover, current trends and limitations in the future “green” development of waste-based polymer materials were also discussed.

Kinetic Analysis on the Stabilization Effects of Substituted POSS Powders Embedded in γ-Radiolyzed Polypropylene

The present paper proposes a reliable alternative for the increasing stability of polypropylene (PP) by modified polyhedral oligomeric silsesquioxanes (POSS). The chemiluminescence measurements and FTIR records point complementarily out the determinant influence of substituents on the progress of oxidation during the accelerated degradation caused by γ-irradiation. The main kinetic approach of oxidation acting in radiation-induced aging recommends some of the studied structures of modified POSS as appropriate compounds for improving stability of polypropylene at low additive concentration. The analysis of the present results is based on the implication of substituted POSS, whose contribution to the limitation of oxidation is conditioned by the influence of substituents. The delay of the oxidative degradation in studied γ-irradiated polypropylene is the consequence of the interaction between molecular PP fragments and the silanol moieties generated during radiolysis, which are the most vulnerable points of POSS structure.

Polypropylene structure alterations after 5 years of natural degradation in a waste landfill

Up to 25% of plastic waste in Europe is still disposed of in landfills, despite recycling efforts. The plastic waste in the landfill plot may be exposed both to abiotic and biotic degradation processes, although it is thought that most of the plastic materials tend to be resistant to biodegradation or biodeterioration even after a long time. To verify if polypropylene (PP) can undergo the process of short-term biodegradation and how this process is manifested in a municipal waste landfill, we collected a plastic sample from an already closed landfill plot estimating its age at approximately 5 years. Fourier-Transform Infrared Spectroscopy led to sample identification as PP as well as showed additional bands which are not specific to polymer structure but rather result from microbial metabolism. Differential Scanning Calorimetry was performed to examine the influence of the environmental degradation process on the degree of crystallisation of the tested PP. Moreover, significant changes on the surface of an old PP packaging were observed with Scanning Electron Microscopy (SEM) showing clear signs of PP delamination which resulted in microplastic particles formation (smaller than 5 μm in diameter). Additionally, several round and oval shaped structures were observed with SEM leading to the suspicion of biofilm formation on the PP surface. Indeed, the microorganisms were present in a vast amount on the old PP surface and possibly formed a viable biofilm as it was confirmed with fluorescence microscopy. These data show that plastic waste can be inhabited by microorganisms from the ambient environment which may probably lead to its faster degradation. However, this process should be investigated in more detail in order to shed light upon the possible risk factors of plastic biodegradation in waste landfills to the environment and human health. Even after five years, polypropylene can undergo deterioration/biodegradation in a waste landfill with viable microbial cells on its surface, possibly involved in its degradation.

Wine By-Products as Raw Materials for the Production of Biopolymers and of Natural Reinforcing Fillers: A Critical Review

The plastic industry is today facing a green revolution; however, biopolymers, produced in low amounts, expensive, and food competitive do not represent an efficient solution. The use of wine waste as second-generation feedstock for the synthesis of polymer building blocks or as reinforcing fillers could represent a solution to reduce biopolymer costs and to boost the biopolymer presence in the market. The present critical review reports the state of the art of the scientific studies concerning the use of wine by-products as substrate for the synthesis of polymer building blocks and as reinforcing fillers for polymers. The review has been mainly focused on the most used bio-based and biodegradable polymers present in the market (i.e., poly(lactic acid), poly(butylene succinate), and poly(hydroxyalkanoates)). The results present in the literature have been reviewed and elaborated in order to suggest new possibilities of development based on the chemical and physical characteristics of wine by-products.

Environmental effects of stratospheric ozone depletion, UV radiation, and interactions with climate change: UNEP Environmental Effects Assessment Panel, Update 2020

This assessment by the Environmental Effects Assessment Panel (EEAP) of the United Nations Environment Programme (UNEP) provides the latest scientific update since our most recent comprehensive assessment (Photochemical and Photobiological Sciences, 2019, 18, 595-828). The interactive effects between the stratospheric ozone layer, solar ultraviolet (UV) radiation, and climate change are presented within the framework of the Montreal Protocol and the United Nations Sustainable Development Goals. We address how these global environmental changes affect the atmosphere and air quality; human health; terrestrial and aquatic ecosystems; biogeochemical cycles; and materials used in outdoor construction, solar energy technologies, and fabrics. In many cases, there is a growing influence from changes in seasonality and extreme events due to climate change. Additionally, we assess the transmission and environmental effects of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which is responsible for the COVID-19 pandemic, in the context of linkages with solar UV radiation and the Montreal Protocol.