Application of bioemulsifiers in soil oil bioremediation processes. Future prospects

Exploring fungal bioemulsifiers: insights into chemical composition, microbial sources, and cross-field applications

The demand for emulsion-based products is crucial for economic development and societal well-being, spanning diverse industries such as food, cosmetics, pharmaceuticals, and oil extraction. Formulating these products relies on emulsifiers, a distinct class of surfactants. However, many conventional emulsifiers are derived from petrochemicals or synthetic sources, posing potential environmental and human health risks. In this context, fungal bioemulsifiers emerge as a compelling and sustainable alternative, demonstrating superior performance, enhanced biodegradability, and safety for human consumption. From this perspective, the present work provides the first comprehensive review of fungal bioemulsifiers, categorizing them based on their chemical nature and microbial origin. This includes polysaccharides, proteins, glycoproteins, polymeric glycolipids, and carbohydrate-lipid-protein complexes. Examples of particular interest are scleroglucan, a polysaccharide produced by Sclerotium rolfsii, and mannoproteins present in the cell walls of various yeasts, including Saccharomyces cerevisiae. Furthermore, this study examines the feasibility of incorporating fungal bioemulsifiers in the food and oil industries and their potential role in bioremediation events for oil-polluted marine environments. Finally, this exploration encourages further research on fungal bioemulsifier bioprospecting, with far-reaching implications for advancing sustainable and eco-friendly practices across various industrial sectors.

Bioremediation of contaminated soil and groundwater by in situ biostimulation

Bioremediation by in situ biostimulation is an attractive alternative to excavation of contaminated soil. Many in situ remediation methods have been tested with some success; however, due to highly variable results in realistic field conditions, they have not been implemented as widely as they might deserve. To ensure success, methods should be validated under site-analogous conditions before full scale use, which requires expertise and local knowledge by the implementers. The focus here is on indigenous microbial degraders and evaluation of their performance. Identifying and removing biodegradation bottlenecks for degradation of organic pollutants is essential. Limiting factors commonly include: lack of oxygen or alternative electron acceptors, low temperature, and lack of essential nutrients. Additional factors: the bioavailability of the contaminating compound, pH, distribution of the contaminant, and soil structure and moisture, and in some cases, lack of degradation potential which may be amended with bioaugmentation. Methods to remove these bottlenecks are discussed. Implementers should also be prepared to combine methods or use them in sequence. Chemical/physical means may be used to enhance biostimulation. The review also suggests tools for assessing sustainability, life cycle assessment, and risk assessment. To help entrepreneurs, decision makers, and methods developers in the future, we suggest founding a database for otherwise seldom reported unsuccessful interventions, as well as the potential for artificial intelligence (AI) to assist in site evaluation and decision-making.

Dibenzothiophene removal by environmental bacteria with differential accumulation of intracellular inorganic polyphosphate

Dibenzothiophene (DBT), which belongs to the group of polycyclic aromatic heterocycles of sulfur, is a model substance to study the removal of sulfur compounds from oil due to its recalcitrance to traditional and specific removal processes. The aim of this work was to evaluate DBT bioremoval by environmental bacteria and its relationship with polyphosphate (polyP) accumulation, cell surface characteristics and bioemulsifying activity. Pseudomonas sp. P26 achieved the highest DBT removal percentage (48%) after 7 days of incubation. Moreover, positive correlations were estimated between DBT removal and bioemulsifying activity and biofilm formation. A strain-dependent relationship between the content of intracellular polyP and the presence of DBT in the culture medium was also demonstrated. The study of these bacterial characteristics, which could promote DBT transformation, is a first approach to select DBT-removing bacteria, in order to develop bioformulations that are able to contribute to desulfurization processes of petroleum-derived pollutants in the future.

Promising application of probiotic microorganisms as Pickering emulsions stabilizers

The purpose of this work was to study the ability of nineteen food-grade microorganisms as Pickering emulsion (PE) stabilizers. Medium-chain triacylglycerol (MCT) oil-in-water (50:50) PEs were fabricated by 10 wt% or 15 wt% of thermally-inactivated yeast, cocci, Bacillus spp. and lactobacilli cells. The characteristics of microorganisms related to "Pickering stabilization" including morphology, surface charge, interfacial tension, and "contact angle" were firstly studied. After that, the cells-stabilized PEs were characterized from both kinetic and thermodynamic viewpoints, microstructure and rheological properties. The interfacial tension and "contact angle" values of various microorganisms ranged from 16.33 to 38.31 mN/m, and from 15° to 106°, respectively. The mean droplet size of PEs ranged from 11.51 to 57.69 µm. Generally, the physical stability of cell-stabilized PEs followed this order: lactobacilli > Bacillus spp. > cocci > yeast. These variations were attributed to the morphology and cell wall composition. Increasing the microorganism concentration significantly increased the physical stability of PEs from a maximum of 12 days at 10 wt% to 35 days at 15 wt% as a result of better interface coverage. Shear-thinning and dominant elastic behaviors were observed in PEs. Physical stability was affected by the free energy of detachment. Therefore, food-grade microorganisms are suggested for stabilizing PEs.

Microbial degradation mechanisms of surface petroleum contaminated seawater in a typical oil trading port

Petroleum hydrocarbons are significant new persistent organic pollutants for marine oil spill risk areas. Oil trading ports, in turn, have become major bearers of the risk of offshore oil pollution. However, studies on the molecular mechanisms of microbial degradation of petroleum pollutants by natural seawater are limited. Here, an in situ microcosm study was conducted. Combined with metagenomics, differences in metabolic pathways and in the gene abundances of total petroleum hydrocarbons (TPH) are revealed under different conditions. About 88% degradation of TPH was shown after 3 weeks of treatment. The positive responders to TPH were concentrated in the genera Cycloclasticus, Marivita and Sulfitobacter of the orders Rhodobacterales and Thiotrichales. The genera Marivita, Roseobacter, Lentibacter and Glaciecola were key degradation species when mixing dispersants with oil, and all of the above are from the Proteobacteria phylum. The analysis showed that the biodegradability of aromatic compounds, polycyclic aromatic hydrocarbon and dioxin were enhanced after the oil spill, and genes with higher abundances of bphAa, bsdC, nahB, doxE and mhpD were found, but the photosynthesis-related mechanism was inhibited. The dispersant treatment effectively stimulated the microbial degradation of TPH and then accelerated the succession of microbial communities. Meanwhile, functions such as bacterial chemotaxis and carbon metabolism (cheA, fadeJ and fadE) were better developed, but the degradation of persistent organic pollutants such as polycyclic aromatic hydrocarbons was weakened. Our study provides insights into the metabolic pathways and specific functional genes for oil degradation by marine microorganisms and will help improve the application and practice of bioremediation.

Biosurfactant Production from Pineapple Waste and Application of Experimental Design and Statistical Analysis

The use of non-conventional carbon sources for biosurfactant-producing microorganisms is a promising alternative in fermentation to substitute costly substrates. So, the current research used pineapple peel as a cost-effective and renewable substrate because of its rich composition in minerals and sugars and high availability. Following a 2² full factorial design, a bacterial strain of Bacillus subtilis produced biosurfactants in fermentative media containing different concentrations of glucose and concentrated pineapple peel juice (CPPJ). The influence of these two independent variables was evaluated according to three different responses: surface tension reduction rate (STRR), emulsification index (EI₂₄), and concentration of semi-purified biosurfactant (SPB). The maximum value for STRR (57.63%) was obtained in media containing 0.58% glucose (w/v) and 5.82% CPPJ (v/v), while the highest EI₂₄ response (58.60%) was observed at 2% glucose (w/v) and 20% CPPJ (v/v) and maximum SPB (1.28 g/L) at 3.42% glucose (w/v) and 34.18% CPPJ (v/v). Statistical analysis indicated that the CPPJ variable mostly influenced the STRR and SPB responses, whereas the EI₂₄ was significantly influenced by pineapple peel juice and glucose contents.

Interdisciplinary Overview of Lipopeptide and Protein-Containing Biosurfactants

Biosurfactants are amphipathic molecules capable of lowering interfacial and superficial tensions. Produced by living organisms, these compounds act the same as chemical surfactants but with a series of improvements, the most notable being biodegradability. Biosurfactants have a wide diversity of categories. Within these, lipopeptides are some of the more abundant and widely known. Protein-containing biosurfactants are much less studied and could be an interesting and valuable alternative. The harsh temperature, pH, and salinity conditions that target organisms can sustain need to be understood for better implementation. Here, we will explore biotechnological applications via lipopeptide and protein-containing biosurfactants. Also, we discuss their natural role and the organisms that produce them, taking a glimpse into the possibilities of research via meta-omics and machine learning.

Biosurfactant Production by Bacillus amyloliquefaciens C11 and Streptomyces lavendulae C27 Isolated from a Biopurification System for Environmental Applications

Biosurfactant-producing bacteria can be found in contaminated environments such as biopurification systems (BPS) for pesticide treatments. A total of 18 isolates were screened to determine their ability to produce extracellular biosurfactants, using olive oil as the main carbon source. Out of the eighteen isolates, two strains (C11 and C27) were selected for biosurfactant production. The emulsification activities of the C11 and C27 strains using sunflower oil was 58.4 and 53.7%, respectively, and 46.6 and 48.0% using olive oil. Using molecular techniques and MALDI-TOF, the strains were identified as Bacillus amyloliquefaciens (C11) and Streptomyces lavendulae (C27). The submerged cultivation of the two selected strains was carried out in a 1 L stirred-tank bioreactor. The maximum biosurfactant production, indicated by the lowest surface tension measurement, was similar (46 and 45 mN/m) for both strains, independent of the fact that the biomass of the B. amyloliquefaciens C11 strain was 50% lower than the biomass of the S. lavendulae C27 strain. The partially purified biosurfactants produced by B. amyloliquefaciens C11 and S. lavendulae C27 were characterized as a lipopeptide and a glycolipid, respectively. These outcomes highlight the potential of the selected biosurfactant-producing microorganisms for improving pesticides’ bioavailability and therefore the degradational efficacy of BPS.

A metagenomic portrait of the microbial community responsible for two decades of bioremediation of poly-contaminated groundwater

Biodegradation of pollutants is a sustainable and cost-effective solution to groundwater pollution. Here, we investigate microbial populations involved in biodegradation of poly-contaminants in a pipeline for heavily contaminated groundwater. Groundwater moves from a polluted park to a treatment plant, where an aerated bioreactor effectively removes the contaminants. While the biomass does not settle in the reactor, sediment is collected afterwards and used to seed the new polluted groundwater via a backwash cycle. The pipeline has successfully operated since 1999, but the biological components in the reactor and the contaminated park groundwater have never been described. We sampled seven points along the pipeline, representing the entire remediation process, and characterized the changing microbial communities using genome-resolved metagenomic analysis. We assembled 297 medium- and high-quality metagenome-assembled genome sequences representing on average 46.3% of the total DNA per sample. We found that the communities cluster into two distinct groups, separating the anaerobic communities in the park groundwater from the aerobic communities inside the plant. In the park, the community is dominated by members of the genus Sulfuricurvum, while the plant is dominated by generalists from the order Burkholderiales. Known aromatic compound biodegradation pathways are four times more abundant in the plant-side communities compared to the park-side. Our findings provide a genome-resolved portrait of the microbial community in a highly effective groundwater treatment system that has treated groundwater with a complex contamination profile for two decades.

Great Abilities of Shinella zoogloeoides Strain from a Landfarming Soil for Crude Oil Degradation and a Synergy Model for Alginate-Bead-Entrapped Consortium Efficiency

Oil contamination is of great concern worldwide and needs to be properly addressed. The present work aimed to contribute to the development of bacterial consortia for oil recovery. We investigated the community structure of a landfarming-treated soil (LF2) by metagenomics to unravel the presence of hydrocarbon degraders. Moreover, we isolated Shinella zoogloeoides LFG9 and Bacillus swezeyi LFS15 from LF2 and combined them with Pseudomonas guguanensis SGPP2 isolated from an auto mechanic workshop soil to form the mixed consortium COG1. Bacterial isolates were tested for biosurfactant production. Additionally, the bioremediation potential of COG1 was studied as free and entrapped consortia by gas chromatography-mass spectrometry, in comparison to the single strains. Results revealed the presence of Actinobacteria (66.11%), Proteobacteria (32.21%), Gammaproteobacteria (5.39%), Actinomycetales (65.15%), Burkholderiales (13.92%), and Mycobacterium (32.22%) taxa, indicating the presence of hydrocarbon degraders in soil LF2. All three isolated strains were biosurfactant producers capable of degrading crude oil components within 14 days. However, Shinella zoogloeoides LFG9 performed best and was retained as candidate for further bioremediation investigation. In addition, COG1 performed better when immobilized, with entrapment effectiveness manifested by increased fatty acids and aromatic compound degradation. Attempt to improve crude oil biodegradation by adding surfactants failed as sodium dodecyl sulfate restrained the immobilized consortium performance.

Production and Characterization of a Bioemulsifier Derived from Microorganisms with Potential Application in the Food Industry

There is a growing interest in the development and use of natural emulsifiers, which provide biodegradability as well as non-toxicity along with giving better performance compared to existing emulsifying agents used in the food industry. A large variety of sources of starting material, i.e., the microorganisms, are available to be used, hence giving a diverse range of applications. The focus of this review paper is on the production of bioemulsifiers, which are said to be "green surfactants", from fungi, bacteria and yeasts; furthermore, an overview pertaining to the knowledge gained over the years in terms of characterization techniques is reported. The methods used for the characterization and isolation such as TLC, GC-MS, HPLC, NMR have also been studied. The end-application products such as cookies, muffins, and doughs along with the methods used for the incorporation of bioemulsifiers, microorganisms from which they are derived, properties imparted to the product with the use of a particular bioemulsifier and comparison with the existing food grade emulsifiers has been discussed in detail. The future prospects indicate that newer bioemulsifiers with anti-microbial, anti-oxidant and stabilization properties will prove to have a larger impact, and emphasis will be on improving the performance at an economically viable methodology.

A comparative study on chemical characterization and properties of surface active compounds from Gram-positive Bacillus and Gram-negative Ochrobactrum strains utilizing pure hydrocarbons and waste mineral lubricating oils

Mineral lubricating oils are widely used in various industrial sectors for their applications in maintenance and functioning of machineries. However, indiscriminate dumping of these used oils have resulted in polluting the natural reservoirs which subsequently destroys ecological balance. Bacteria can emulsify or lower surface tension between phases of immiscible substrates and can acquire them as their carbon and energy sources. Such a phenomenon is mediated by production of extracellular polymers which can function as eminent surface active compounds based on their surfactant or emulsifying nature. The comparison between bacterial strains (Gram-positive Bacillus stratosphericus A15 and Gram-negative Ochrobactrum pseudintermedium C1) on utilization of pure straight chain hydrocarbons, waste mineral lubricating oils as sole carbon source and chemical characterization of the synthesized surface active compounds were studied. Characterization analysis by Ultraviolet Visible spectrophotometry, Fourier transform infrared spectroscopy, Nuclear Magnetic Resonance spectroscopy, Carbon-Hydrogen-Nitrogen analysis has given detailed structural elucidation of surface active compounds. The contrasting nature of bacterial strains in utilization of different hydrocarbons of waste mineral lubricating oils was observed in Gas Chromatography-Mass Spectroscopy analysis. The variation between both strains in utilization of hydrocarbons can be manifested in chemical structural differences and properties of the produced surface active compounds. Scanning Electron Microscopy has given detailed insight into the microstructural difference of the compounds. The utilization of lubricating oils can address waste disposal problem and offer an economical feasible approach for bacterial production of surface active compounds. Our results suggest that these surface active compounds can maneuver applications in environmental bioremediation and agriculture, pharmaceuticals and food as functional biomaterials.

Formulation of a Culture Medium to Optimize the Production of Lipopeptide Biosurfactant by a New Isolate of Bacillus sp.: A Soil Heavy Metal Mitigation Approach

This research aimed to optimize a lipopeptide biosurfactant produced from Bacillus sp. SHA302 due to its high efficiency of heavy metal release in soil. The results demonstrated that the metal release capacity of the lipopeptide biosurfactant alone increased with increasing the biosurfactant concentration. Among treatments with different biosurfactant concentrations plus acid, the highest metal release rates of 53.8% ± 1.4 and 39.3% ± 1.7 for Zn and Pb, respectively, were observed in the critical micelle concentration (CMC) + HCl treatment. The results of a factorial experiment designed for optimizing biosurfactant production showed that among five inexpensive carbon sources and six mineral nitrogen sources, sugar beet molasses (1%) and ammonium chloride (0.1%) were the most efficient sources in lowering the surface tension (ST) of the culture media to 32.2 ± 0.76 mN/m. The second step of the experiment was a Plackett-Burman design with 11 factors and showed that the four factors of pH, ammonium chloride, magnesium sulfate, and molasses significantly affected (P < 0.05) the changes in ST and biosurfactant production. The third step of the experiment was done using the response surface methodology (RSM) with a central composite design. The results showed that a pH of 7.3, 1.5 g/l of ammonium chloride, 0.3 g/l of magnesium sulfate, and 10% of sugar beet molasses yielded values of 29.2 ± 0.71 mN/m and 5.74 ± 0.52 g/l for the two variables of ST and biosurfactant production, respectively, which reached their most optimal levels.

Materials and energy recovery from oily sludges removed from crude oil storage tanks (tank bottoms): A review of technologies

Sludge and solids accumulating in crude oil storage tanks (referred as tank bottoms) reduces tank volume and requires periodic removal and disposal. Effective management of tank bottoms require considerations to reduce the toxicity of wastes and reduce potential environment impacts. This review compares alternative technologies for economical and environmentally beneficial management of oily sludges for recovery of hydrocarbons and energy with and without oil recovery. Management options with oil recovery include solvent extraction, centrifugation, surfactant oil recovery, and pyrolysis. Management options without oil recovery include incineration and anaerobic co-digestion. The selection of the appropriate technology depends on the characteristics of oily sludge, treatment capacity, as well as operation and maintenance costs. An efficient treatment can involve integration of different technologies for recovery of different oil fractions and to reduce energy demand. Technologies that utilize renewable energy (e.g., solar pyrolysis) can offset the high energy demand of pyrolysis process while recovering marketable products.

Structural and functional characterization of a novel biosurfactant from Bacillus sp. IITD106

Plant saponins are attractive biosurfactants and have been used to enhance phytoremediation. There are only limited reports on saponins produced by bacteria. Here, we report structural and functional characterization of a novel saponin produced by Bacillus sp. IITD106. Biosurfactant production was determined by emulsion index, drop collapse, oil displacement and hemolytic assays. The biosurfactant was stable over a range of temperature (30 °C to 70 °C), salinity (0-150 g liter^-1) and pH (4-10). The surface tension of the medium reduced from 58.89 mN/m to 27.29 mN/m using the isolated biosurfactant. Chromatographic analysis revealed the biosurfactant to be a glycolipid. LCMS, FT-IR and NMR analysis identified the biosurfactant to be a saponin containing two sugar groups and a 5 ringed triterpene sapogenin unit. Genome sequencing of the strain revealed the presence of genes responsible for biosynthesis of saponin. Statistical optimization of culture medium resulted in 9.3-fold increase in biosurfactant production. Kinetics study of biosurfactant production performed in a stirred tank batch bioreactor resulted in 6.04 g liter^-1 and 6.9 g liter^-1 biomass and biosurfactant concentration, respectively. The biosurfactant was found to solubilize polycyclic aromatic hydrocarbons. The potential of cell free biosurfactant containing broth to enhance oil recovery was tested in a sand pack column and recovery of 63% of residual oil was observed. To our knowledge this is the first report of saponin production by any of the strains of Bacillus.

Application of Green Surfactants in the Remediation of Soils Contaminated by Hydrocarbons

Among the innovative technologies utilized for the treatment of contaminated soils, the use of green surfactants appears to be a biocompatible, efficient, and attractive alternative, since the cleaning processes that normally use synthetic surfactants as additives cause other problems due to toxicity and the accumulation of by-products. Three green surfactants, i.e., two biobased (biobased 1 and biobased 2) surfactants produced by chemical synthesis and a microbial surfactant produced from the yeast Starmerella bombicola ATCC 22214, were used as soil remediation agents and compared to a synthetic surfactant (Tween 80). The three surfactants were tested for their ability to emulsify, disperse, and remove different hydrophobic contaminants. The biosurfactant, which was able to reduce the water surface tension to 32.30 mN/m at a critical micelle concentration of 0.65 g/L, was then used to prepare a commercial formulation that showed lower toxicity to the tested environmental bioindicators and lower dispersion capacity than the biobased surfactants. All the green surfactants showed great emulsification capacity, especially against motor oil and petroleum. Therefore, their potential to remove motor oil adsorbed on different types of soils (sandy, silty, and clay soil and beach sand) was investigated either in kinetic (flasks) or static (packed columns) experiments. The commercial biosurfactant formulation showed excellent effectiveness in removing motor oil, especially from contaminated sandy soil (80.0 ± 0.46%) and beach sand (65.0 ± 0.14%) under static conditions, while, in the kinetic experiments, the commercial biosurfactant and the biobased 2 surfactant were able to remove motor oil from all the contaminated soils tested more effectively than the biobased 1 surfactant. Finally, the S. bombicola commercial biosurfactant was evaluated as a soil bioremediation agent. In degradation experiments carried out on motor oil-contaminated soils enriched with sugarcane molasses, oil degradation yield in the sandy soil reached almost 90% after 60 days in the presence of the commercial biosurfactant, while it did not exceed 20% in the presence of only S. bombicola cells. These results promise to contribute to the development of green technologies for the treatment of hydrophobic pollutants with economic gains for the oil industries.

Bacteria, Fungi and Microalgae for the Bioremediation of Marine Sediments Contaminated by Petroleum Hydrocarbons in the Omics Era

Petroleum hydrocarbons (PHCs) are one of the most widespread and heterogeneous organic contaminants affecting marine ecosystems. The contamination of marine sediments or coastal areas by PHCs represents a major threat for the ecosystem and human health, calling for urgent, effective, and sustainable remediation solutions. Aside from some physical and chemical treatments that have been established over the years for marine sediment reclamation, bioremediation approaches based on the use of microorganisms are gaining increasing attention for their eco-compatibility, and lower costs. In this work, we review current knowledge concerning the bioremediation of PHCs in marine systems, presenting a synthesis of the most effective microbial taxa (i.e., bacteria, fungi, and microalgae) identified so far for hydrocarbon removal. We also discuss the challenges offered by innovative molecular approaches for the design of effective reclamation strategies based on these three microbial components of marine sediments contaminated by hydrocarbons.

The role of soils in provision of genetic, medicinal and biochemical resources

Intact, 'healthy' soils provide indispensable ecosystem services that largely depend on the biotic activity. Soil health is connected with human health, yet, knowledge of the underlying soil functioning remains incomplete. This review highlights selected services, i.e. (i) soil as a genetic resource and hotspot of biodiversity, forming the basis for providing (ii) biochemical resources and (iii) medicinal services and goods. Soils harbour an unrivalled biodiversity of organisms, especially microorganisms. Some of the abilities of autochthonous microorganisms and their relevant enzymes serve (i) to improve natural soil functions and in particular plant growth, e.g. through beneficial plant growth-promoting, symbiotic and mycorrhizal microorganisms, (ii) to act as biopesticides, (iii) to facilitate biodegradation of pollutants for soil bioremediation and (iv) to yield enzymes or chemicals for industrial use. Soils also exert direct effects on human health. Contact with soil enriches the human microbiome, affords protection against allergies and promotes emotional well-being. Medicinally relevant are soil substrates such as loams, clays and various minerals with curative effects as well as pharmaceutically active organic chemicals like antibiotics that are formed by soil microorganisms. By contrast, irritating minerals, soil dust inhalation and misguided soil ingestion may adversely affect humans. This article is part of the theme issue 'The role of soils in delivering Nature's Contributions to People.

Production, characterization and bio-emulsifying application of exopolysaccharides from Rhodotorula mucilaginosa YMM19

Microbial exopolysaccharides (EPS) are high molecular weight polymers having different sugar residues. EPS have potential applications in different fields, such as medicine, food and environment. Therefore, there is a growing interest in production, characterization and application of EPS from different microorganisms. The present study designed to investigate the production and characterization of EPS from Rhodotorula mucilaginosa YMM19 isolated from Morus nigra L. fruits as well as to examine their potential emulsifying properties. Effect of NaCl concentration, incubation period and pH on the production of EPS was studied. The maximum EPS production by yeast was achieved at 10% NaCl (9741.84 mg/l). The best incubation time for production of EPS was 5 days. Production of EPS decreased under neutral condition and increased at acidic and alkaline condition. The structural feature of EPS was examined by FT-IR and NMR spectral analysis and confirmed the presence of glucose, glucopyranose and galactose. The isolated EPS showed higher emulsification capacity with emulsification activity of 71% and emulsifying index of 60%. The EPS gave strong emulsification for farnesol and was more effective than sodium dodecyl sulphate, a reference emulsifier, in enhancing the herbicidal activity of farnesol against Melilotus indicus under greenhouse condition. The results suggest that the EPS produced by YMM19 strain has a potential to be used as emulsifying agent in pesticide formulations.

16S rRNA gene profiling of rhizospheric microbial community of Eichhornia crassipes

The rhizosphere of a plant is an important interface for the plant-microbe interaction that plays a significant role in the uptake and removal of heavy metal from contaminated sites. Eichhornia crassipes is a free-floating macrophyte and a well-known metal hyperaccumulator. It is a promising plant, which harbors a diverse microbial community in its rhizosphere. Therefore it is hypothesized that it can be a good habitat for microorganisms that supports plant growth and increases its phytoremediation potential. The rhizospheric DNA was extracted from the procured plant samples. The library was prepared and sequenced using the Illumina platform. 16S rRNA data from the Next Generation Sequencing (NGS) platform was analyzed using the QIIME software package. Alpha diversity was estimated from statistical indices i.e. Shannon index, Chao1 index, and observed species. The rarefaction plots, rank abundance curve, krona graph, and heat map were generated to study the rhizospheric community in detail. Metagenome consisted of 225,408 flash reads, 185,008 non-chimeric sequences with 17,578 Operational Taxonomic Units (OTU's), and 4622 OTU's without singletons. The data of present study are available at NCBI Bioproject (PRJNA631882). The taxonomic analysis of OTU's showed that the sequences belonged to major Phyla revealing the dominance of Proteobacteria, Bacteroidetes, Cyanobacteria, and Verrucomicrobia. The most abundant Genera in the sampled rhizosphere recorded were Thiothrix and Flavobacterium.

Kurstakin molecules facilitate diesel oil assimilation by Acinetobacter haemolyticus strain 2SA through overexpression of alkane hydroxylase genes

Biodegradation is a cost-effective process commonly used to eliminate many xenobiotic hydrocarbons such as diesel oils. However, their hydrophobic character reduces the biodegradation efficiency. In order to overcome this hurdle, kurstakins isolated from Bacillus thuringiensis strain 7SA were used as emulsifying agents. The influence of kurstakin molecules on diesel oil degradation by Acinetobacter haemolyticus strain 2SA was evaluated in the presence and absence of the aforementioned lipopeptide. The degradation rates and gene expressions of alkane hydroxylases were evaluated at days 4, 10, 14 and 21. Results showed that kurstakin molecules increased the hydrophobicity of 2SA. Moreover, diesel oil degradation activities were higher in the presence of kurstakin with 29%, 35%, 29% and 23% improvement at 4th, 10th, 14th and 21st day respectively. Statistical analysis indicated that the difference between the degradation rates in the presence and absence of kurstakin was significant with p = 0.03. The detection of three different hydroxylase genes namely alkB, almA and cyp153 in 2SA genome, might have allowed more efficient degradability of alkanes. According to the real-time PCR results, cyp153 was the most induced gene during diesel oil degradation in the presence and absence of kurstakin. Yet, the three genes demonstrated higher levels of expression in the presence of kurstakin when compared to its absence. This study showed that kurstakins enhance the diesel oil biodegradation rate by increasing the hydrophobicity of 2SA. In addition to their anti-fungal activities, kurstakins can be used as biosurfactant to increase biodegradation of diesel oil.

Bacterial biosurfactant increases ex situ biodiesel bioremediation in clayey soil

The contamination of soils by oily compounds has several environmental impacts, which can be reversed through bioremediation, using biosurfactants as auxiliaries in the biodegradation process. In this study, we aimed to perform ex situ bioremediation of biodiesel-contaminated soil using biosurfactants produced by Bacillus methylotrophicus. A crude biosurfactant was produced in a whey-based culture medium supplemented with nutrients and was later added to biodiesel-contaminated clayey soil. The produced lipopeptide biosurfactant could reduce the surface tension of the fermentation broth to 30.2 mN/m. An increase in the microbial population was observed in the contaminated soil; this finding can be corroborated by the finding of increased CO₂ release over days of bioremediation. Compared with natural attenuation, the addition of a lower concentration of the biosurfactant (0.5% w/w in relation to the mass of diesel oil) to the soil increased biodiesel removal by about 16% after 90 days. The added biosurfactant did not affect the retention of the contaminant in the soil, which is an important factor to be considered when applying in situ bioremediation technologies.

Development and Genetic Engineering of Hyper-Producing Microbial Strains for Improved Synthesis of Biosurfactants

Current research energies are fixated on the synthesis of environmentally friendly and non-hazardous products, which include finding and recognizing biosurfactants that can substitute synthetic surfactants. Microbial biosurfactants are surface-active compounds synthesized intracellularly or extracellularly. To use biosurfactants in various industries, it is essential to understand scientific engagements that demonstrate its potentials as real advancement in the 21st century. Other than applying a substantial effect on the world economic market, engineered hyper-producing microbial strains in combination with optimized cultivation parameters have made it probable for many industrial companies to receive the profits of 'green' biosurfactant innovation. There needs to be an emphasis on the worldwide state of biosurfactant synthesis, expression of biosurfactant genes in expressive host systems, the recent developments, and prospects in this line of research. Thus, molecular dynamics with respect to genetic engineering of biosynthetic genes are proposed as new biotechnological tools for development, improved synthesis, and applications of biosurfactants. For example, mutant and hyper-producing recombinants have been designed efficaciously to advance the nature, quantity, and quality of biosurfactants. The fastidious and deliberate investigation will prompt a comprehension of the molecular dynamics and phenomena in new microorganisms. Throughout the decade, valuable data on the molecular genetics of biosurfactant have been produced, and this solid foundation would encourage application-oriented yields of the biosurfactant production industry and expand its utilization in diverse fields. Therefore, the conversations among different interdisciplinary experts from various scientific interests such as microbiology, biochemistry, molecular biology, and genetics are indispensable and significant to accomplish these objectives.

Bioremediation of oily sludge by solid complex bacterial agent with a combined two-step process

In the present research, a bioremediation process was developed using solid complex bacterial agents (SCBA) through a combined two-step biodegradation process. Four isolated strains showed high efficiency for the degradation of total petroleum hydrocarbons (TPH) and the reduction of COD of the oily sludge, at 96.6% and 92.6%, respectively. The mixed strains together with bran prepared in form of SCBA exhibited improved performance compared to individual strains, all of which had an optimal temperature of around 35 °C. The use of SCBA provided advantages over commonly used liquid media for storage and transportation. The two-step process, consisting of firstly biosurfactant-assisted oil recovery and secondly biodegradation of the remaining TPH with SCBA, demonstrated the capability for treating oily sludge with high TPH content (>10 wt%) and short process period (60 days). The large-scale (5 tons oily sludge) field test, achieving a TPH removal efficiency of 93.8% and COD reduction of 91.5%, respectively, confirmed the feasibility and superiority of the technology for industrial applications.

Enhanced biodegradation of crude oil in soil by a developed bacterial consortium and indigenous plant growth promoting bacteria

AIMS

This study aimed to develop an efficient, cost-effective and eco-friendly bacterial consortium to degrade petroleum sludge.

METHODS AND RESULTS

Four bacterial strains belonging to genera Acinetobacter and Pseudomonas were selected to constitute three different consortia based on their initial concentration. The highest degradation rate (78%) of 1% (v/v) crude oil after 4 weeks of incubation was recorded when the concentration of biosurfactant (BS) producing isolate was high. Genes, such as alkB, almA, cyp153, pah-rhdGN, nah, phnAC and cat23 were detected using the polymerase chain reaction method and their induction levels were optimal at pH 7·0. A crude oil sludge was artificially constituted, and its bacterial composition was investigated using 16S rRNA gene amplicon sequencing. The results showed that the soil bacterial community was dominated by plant growth-promoting bacteria (PGPB) after crude oil treatment.

CONCLUSIONS

Our findings indicate the decontamination of the crude oil contaminated soil was more effective in the presence of both the constituted consortium and PGPB compared to the presence of PGPB alone.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study showed that the PGPB (Taibaiella) present in petroleum uncontaminated soil can promote the soil decontamination. The addition of both efficient hydrocarbon-degrading and BS producing bacteria is also necessary to improve the decontamination.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Bioconversion of Calophyllum inophyllum oilcake for intensification of rhamnolipid and polyhydroxyalkanoates co-production by Enterobacter aerogenes

The biologically derived products are highly valued due to their biodegradability, low toxicity, and renewability. However, most production processes are exorbitant due to high raw material cost and the downstream processing required for product recovery and purification. Therefore, the present study utilized the low-cost lignocellulosic biomass, Calophyllum inophyllum oilcake for the simultaneous production of PHA and rhamnolipid by a facultative anaerobe Enterobacter aerogenes. Both the products are produced during the stationary phase and constitute β- hydroxyalkanoic acids, which makes it feasible for the co-production through a single fermentation process. From the batch fermentation studies, it was revealed that the under optimum condition rhamnolipid and PHA yield are 5.81 g/L and 4.2 g/L: 5%(v/v) of inoculum size, pH of 6.5, C:N ratio of 5:1 and urea are found to be the best nitrogen source for the fermentation process. Characterization studies for extracted PHA and RL was done using- FTIR, NMR and TGA analysis.

Microbial Biosurfactants-an Ecofriendly Boon to Industries for Green Revolution

Biosurfactants have a biological origin, and are widely known as surface active agents. Different classes of biosurfactant have significant importance in both the biotechnological and microbiological arena. Pseudomonas aeruginosa, Bacillus subtilis and Candida sp. are important classes of microorganisms that are highly investigated for the production of rhamnolipids (RLs) biosurfactants. Rhamnolipids have unique surface activity and have gained interest in various industrial applications. Due to their high biodegradability, renewability and functionally maintenance at extreme conditions, microbial biosurfactants are more advantageous than chemical-based biosurfactants. Biosurfactants produced by microorganisms are a potential candidate for biodegradation, environmental cleanup of pollutants and also play a role in the heavy metal removal of metallurgical industries also many patents have been filed. Therefore, greater attention has been paid to biosurfactants and identifying their potential applications for further studies.

Biosurfactant: A new frontier for greener technology and environmental sustainability

Petroleum hydrocarbons, oil, heavy metals pollution is becoming additional severe problem due to the growing call for crude oil and crude oil products related products in several fields of application. Such pollution have fascinated much considerations and attractions as it leads to ecological damages in both marines, aquatic and terrestrial ecosystems. Thus, different techniques including chemical surfactants and complex technologies have been proposed for their clean up from the environment, which in turn has detrimental effects on the environment. As of late, biosurfactant compounds have added much deliberation since they are considered as a reasonable option and eco-accommodating materials for remediation technology. The present society is confronting a few difficulties of usage, authorizing ecological protection and environmental change for the next generations. Biosurfactants hold the special property of minimizing and reducing the interfacial tension of liquids. Such features endure biosurfactants to afford a major part in emulsification, de-emulsification, biodegradability, foam formation, washing performance, surface activity, and detergent formulation, which have potential applications in the diverse industrial set-up. Conversations on cost-effective technologies, renewable materials, novel synthesis, downstream, upstream, emerging characterization techniques, molecular, and genetical engineering are substantial to produce biosurfactant of quality and quantity. Therefore, greater attention is being paid to biosurfactant production by identifying their environmental, and biotechnological applications. Be that as it may, the extravagant cost drew in with biosurfactants biotechnological synthesis and recovery can hamper their application in those areas. Notwithstanding these costs, biosurfactants can be used as these parts shows outstandingly high benefits that can at present beat the expenses incurred in the initial purification and downstream processes. Biosurfactant production by microorganisms is relatively considered one of the crucial know-how for improvement, growth, advancement, and environmental sustainability of the 21st century. There is a developing conversation around environmental safety and the significant role that biosurfactants will progressively play soon, for instance, the use of renewable by-products as substrates, potential reduction, re-use and recycling of waste and waste products. The review confers the usefulness of biosurfactants in the removal of environmental contaminants and, consequently, expanding environmental safety and drive towards greener technology.

The Potential Applications of Bacillus sp. and Pseudomonas sp. Strains with Antimicrobial Activity against Phytopathogens, in Waste Oils and the Bioremediation of Hydrocarbons

Biodegradation is one of the primary mechanisms for the elimination of petroleum and other hydrocarbon pollutants from the environment. This study presents the results obtained with two newly isolated microorganisms and their potential applications in bioremediation, agriculture, and industrial fields. Twenty-five strains of microorganisms were isolated from plant materials and were subject to a selection process on the basis of antimicrobial activity. Two bacterial strains, respectively Bacillus mycoides (Bm) and Pseudomonas putida (B1), were selected for further experiments, based on the largest inhibition zones against the phytopathogens Erwinia carotovora and Xanthomonas campestris. The production of biosurfactants and enzymes was evaluated in specific media. In order to assess the production of biosurfactants, submerged bioprocesses were carried out on Yeast Malt Peptone Glucose (YMPG), M44, Luria-Bertani (LB), and King B media (KB); the supernatants were used to form emulsions with heptane, octane, and sunflower oil, and the emulsifying indices were determined.

Designer bioemulsifiers based on combinations of different polysaccharides with the novel emulsifying esterase AXE from Bacillus subtilis CICC 20034

Background

Bioemulsifiers are surface-active compounds, which exhibit advantages including low toxicity, higher biodegradability and biocompatibility over synthetic chemical surfactants. Despite their potential benefits, some obstacles impede the practical applications of bioemulsifiers, including low yields and high purification costs. Here, we aimed to exploit a novel protein bioemulsifier with efficient emulsifying activity and low-production cost, as well as proposed a design-bioemulsifier system that meets different requirements of industrial emulsification in the most economical way.

Results

The esterase AXE was first reported for its efficient emulsifying activity and had been studied for possible application as a protein bioemulsifier. AXE showed an excellent emulsification effect with different hydrophobic substrates, especially short-chain aliphatic and benzene derivatives, as well as excellent stability under extreme conditions such as high temperature (85 °C) and acidic conditions. AXE also exhibited good stability over a range of NaCl, MgSO₄, and CaCl₂ concentrations from 0 to 1000 mM, and the emulsifying activity even showed a slight increase at salt concentrations over 500 mM. A design-bioemulsifier system was proposed that uses AXE in combination with a variety of polysaccharides to form efficient bioemulsifier, which enhanced the emulsifying activity and further lowered the concentration of AXE needed in the complex.

Conclusions

AXE showed a great application potential as a novel bioemulsifier with excellent emulsifying ability. The AXE-based-designer bioemulsifier could be obtained in the most economical way and open broad new fields for low-cost, environmentally friendly bioemulsifiers.

Weighted linear models for simulation and prediction of biodegradation in diesel polluted soils

The purpose of this research is to find a mathematical model based on a statistical analysis to predict the evolution of the total petroleum hydrocarbons (TPH) concentrations with time in the bioremediation process of diesel contaminated soils. The analysis is useful to compare and ascertain the efficiency of different remediation treatments and the influence of both soil characteristics and initial concentration levels of hydrocarbons on the biodegradation process. An experimental design, considering two types of soil, two concentration levels of hydrocarbons and six different amendments was carried out. A total of 336 laboratory tests were conducted during a year in 48 land plots of 4×4m, spreading over eight field campaigns. The results show, for the first time to the best of our knowledge, that the bioremediation process can be adjusted quantitatively to an exponential model, following a first-order kinetic equation. The model explains correctly the higher efficiency of some treatments. In the case of hydrocarbon concentrations <16,000mg/kg, it is advisable to use slow-release fertilizer without the use of surfactant; whereas, for concentrations above 30,000mg/kg, the addition of surfactants improves the results considerably.

Technical approaches to evaluate the surfactant-enhanced biodegradation of biodiesel and vegetable oils

This research compared the effects of biosurfactant on the biodegradation of biodiesel and vegetable oils while validating two conceptually diverging methodologies. The two experimental setups were successfully modeled towards the effects of biosurfactants during biodegradation. We established the equivalence of both methodologies from the data output. As expected, the biosurfactants caused an increased oil uptake, thus increasing biodegradation performance. Cooking oils were favored by the microbial consortium as a carbon source when compared with biodiesel fuel, especially after use in food preparation. However, we found that biodiesel substrate standout with the highest biodegradation rates. Our results might indicate that a rapid metabolic change from the original compound initially favored biodiesels during the assimilation of organic carbon for a set specialized microbial inoculum. The data output was successfully combined with mathematical models and statistical tools to describe and predict the actual environmental behavior of biodiesel and vegetable oils. The models confirmed and predicted the biodegradation effectiveness with biosurfactants and estimated the required timeframe to achieve satisfactory contaminant removal.

Bioremediation capability evaluation of benzene and sulfolane contaminated groundwater: Determination of bioremediation parameters

Benzene and sulfolane are commonly used but hazardous chemicals in the petrochemical industry and their leakage and inappropriate disposal certainly causes serious soil and groundwater contamination. In this research, the bioremediation potential of groundwater contaminated with benzene and sulfolane was evaluated, and the operating parameters for bioremediation were established through laboratory batch experiments. Among the various bacterial consortia, the bacterial population of monitoring well c (MWc) contained the highest sulfolane and benzene removal efficiencies. When the dissolved oxygen (DO) level was >1 mg L^-1, the bacterial population of MWc showed excellent removal efficiencies toward high and low concentrations of benzene and sulfolane. The C:N:P ratio of 100:10:1 in media facilitated sulfolane and benzene biodegradation, and the degradation time was greatly reduced. Adding additional phosphate into real groundwater could slightly increase benzene removal efficiency. Trace elements only slightly enhanced benzene degradation. On the contrary, additional phosphate and trace elements supplementary did not enhance sulfolane degradation. However, sulfolane removal efficiency could be significantly improved through bioaugmentation of specific sulfolane degrading bacterium and 100% sulfolane removal efficiency was achieved.

Biosurfactant production by fungi as a sustainable alternative

ABSTRACT: A wide variety of bacteria is far more exploited than fungi as biosurfactants (BS) or bioemulsifiers (BE), using renewable sources. BS are considered to be environmentally safe and offer advantages over synthetic surfactants. However, the BS yield depends largely on the metabolic pathways of the microorganisms and the nutritional medium. The production of BS or BE uses several cultural conditions, in which a small change in carbon and nitrogen sources affects the quantity of BS or BE produced. The type and quantity of microbial BS or BE produced depend mainly on the producer organism, and factors such as carbon and nitrogen sources, trace elements, temperature and aeration. The diversity of BS or BE makes it interesting to apply them in the pharmaceutical and cosmetics industries, agriculture, public health, food processes, detergents, when treating oily residues, environmental pollution control and bioremediation. Thus, this paper reviews and addresses the biotechnological potential of yeasts and filamentous fungi for producing, characterizing and applying BS or BE.

Biodegradation of high-molecular-weight polycyclic aromatic hydrocarbons under anaerobic conditions: Overview of studies, proposed pathways and future perspectives

The biodegradation of low- and high-molecular-weight polycyclic aromatic hydrocarbons (PAHs) (LWM-PAHs and HMW-PAHs, respectively) has been studied extensively under aerobic conditions. Molecular O₂ plays 2 critical roles in this biodegradation process. O₂ activates the aromatic rings through hydroxylation prior to ring opening and serves as a terminal electron acceptor (TEA). However, several microorganisms have devised ways of activating aromatic rings, leading to ring opening (and thus biodegradation) when TEAs other than O₂ are used (under anoxic conditions). These microorganisms belong to the sulfate-, nitrate-, and metal-ion-reducing bacteria and the methanogens. Although the anaerobic biodegradation of monocyclic aromatic hydrocarbons and LWM-PAH naphthalene have been studied, little information is available about the biodegradation of HMW-PAHs. This manuscript reviews studies of the anaerobic biodegradation of HMW-PAHs and identifies gaps that limit both our understanding and the efficiency of this biodegradation process. Strategies that can be employed to overcome these limitations are also discussed.

Bioemulsifiers Derived from Microorganisms: Applications in the Drug and Food Industry

Emulsifiers are a large category of compounds considered as surface active agents or surfactants. An emulsifier acts by reducing the speed of chemical reactions, and enhancing its stability. Bioemulsifiers are known as surface active biomolecule materials, due to their unique features over chemical surfactants, such as non-toxicity, biodegradability, foaming, biocompatibility, efficiency at low concentrations, high selectivity in different pH, temperatures and salinities. Emulsifiers are found in various natural resources and are synthesized by Bacteria, Fungi and Yeast. Bioemulsifier’s molecular weight is higher than that of biosurfactants. Emulsion’s function is closely related to their chemical structure. Therefore, the aim of this paper was to study the various bioemulsifiers derived from microorganisms used in the drug and food industry. In this manuscript, we studied organisms with biosurfactant producing abilities. These inexpensive substrates could be used in environmental remediation and in the petroleum industry.

Feasibility of oxidation-biodegradation serial foam spraying for total petroleum hydrocarbon removal without soil disturbance

This study evaluated surface foam spraying technology, which avoids disturbing the soil, to deliver chemical oxidant and oil-degrading microbes to unsaturated soil for 30 days. Hydrogen peroxide foam was sprayed once onto diesel contaminated soil for oxidation of soil total petroleum hydrocarbon (TPH). Periodic bioaugmentation foam was sprayed every three days for biodegradation of soil TPH. Foam spraying employing oxidation-bioaugmentation serial application significantly reduced soil TPH concentrations to 550 mg·kg^-1 from an initial 7470 mg·kg^-1. This study selected an optimal hydrogen peroxide concentration of 5%, which is capable of treating diesel oil contaminated soil following biodegradation without supplementary iron. Application of hydrogen peroxide by foam spraying increased the infiltration of hydrogen peroxide into the unsaturated soil. Surface foam spraying provided the aqueous phase of remediation agents evenly to the unsaturated soil and resulted in relatively similar soil water content throughout the soil. The easy and even infiltration of remediation reagents increased their contact with contaminants, resulting in enhanced oxidation and biodegradation. Fractional analysis of TPH showed C18-C22 present in diesel as biodegradation recalcitrant hydrocarbons. Recalcitrant hydrocarbons were reduced by 92% using oxidation-biodegradation serial foam, while biodegradation alone only reduced the recalcitrant fraction by 25%.

Polycyclic aromatic hydrocarbon-emulsifier protein produced by Aspergillus brasiliensis (niger) in an airlift bioreactor following an electrochemical pretreatment

An emulsifier protein (EP) was produced and easily separated from oil-contaminated water as an economical substrate when Aspergillus brasiliensis, pretreated in a solid state culture with a controlled electric field, was used in an airlift bioreactor. The hydrocarbon-EP comprised 19.5% of the total protein, its purification enhanced the specific emulsifying activity (EA) seven times. The influence of operational conditions (pH and salt concentration) on the EA were assessed to characterise the emulsion stability. The EA was increased by 19% in alkaline environments (pH 7-11), but it was not affected by the presence of salt (0-35 g L^-1). On the other hand, preheating the EP samples (60 °C) enhanced the EA by 2.5 times. Based on analysis of its EA, this EP can be applied as a bioremediation enhancer in contaminated soils.

Streptomyces luridus So3.2 from Antarctic soil as a novel producer of compounds with bioemulsification potential

The present study aimed to identify novel microbial producers of bioemulsificant compounds from Antarctic soils. Fifty-nine microbial strains were isolated from five different locations at South Shetland Islands, Antarctica, and screened for biosurfactant production by β-hemolytic activity. Strain So 3.2 was determined as bioemulsifier-producer and identified by phenotypic and molecular characterization as Streptomyces luridus. Emulsification activity, oil displacement method and drop-collapsing test were performed to evaluate the biosurfactant activity with different oils and hydrocarbons using two different culture media (Luria Bertani and Bushnell Haas in the presence of different carbon sources: glucose, glycerol, olive oil and n-Hexadecane). Cell free supernatant of Bushnell Haas culture supplemented with n-Hexadecane showed the best results for all tests. Emulsification of hydrocarbons exceeded 60%, reaching up to 90% on oil with high API grade, while displacement tests ranged from 8 cm to 4 cm in diameter according the culture media and tested oils. Our results revealed that Streptomyces luridus So3.2 is able to produce bioemulsifiers capable of emulsifying hydrocarbons and oils, which could be used in different biotechnological applications, particularly for bioremediation of environments contaminated by oil leaks.

Development of bioreactors for comparative study of natural attenuation, biostimulation, and bioaugmentation of petroleum-hydrocarbon contaminated soil

Bioremediation of soil and groundwater sites contaminated by petroleum hydrocarbons is known as a technically viable, cost-effective, and environmentally sustainable technology. The purpose of this study is to investigate laboratory-scale bioremediation of petroleum-hydrocarbon contaminated soil through development of eight bioreactors, two bioreactors for each bioremediation mode. The modes were: (1) natural attenuation (NA); (2) biostimulation (BS) with oxygen and nutrients; (3) bioaugmentation (BA) with hydrocarbon degrading isolates; (4) a combination of biostimulation and bioaugmentation (BS-BA). Total petroleum hydrocarbons (TPH) mass balance over the bioreactors showed about 2% of initial 20,000mgkg-soil^-1 TPH was removed by advection due to synthetic groundwater which was flowing through the soil, and the rest of decrease in TPH was caused by biodegradation. The BS-BA mode showed the highest TPH biodegradation percentage (89.7±0.3%) compared to the NA (51.4±0.6%), BS (81.9±0.3%) and BA (62.9±0.5%) modes. Furthermore, an increase in microbial population was another evidence of TPH biodegradation by microorganism. Reaction rate data from each bioremediation mode were fitted with a first-order reaction rate model. The Monod kinetic constants including maximum specific growth rate of microorganisms (μ_max) and substrate concentration at half-velocity constant (K_s) were estimated for each bioremediation modes.

Petroleum degradation by endophytic Streptomyces spp. isolated from plants grown in contaminated soil of southern Algeria

Petroleum hydrocarbons are well known by their high toxicity and recalcitrant properties. Their increasing utilization around worldwide led to environmental contamination. Phytoremediation using plant-associated microbe is an interesting approach for petroleum degradation and actinobacteria have a great potential for that. For this purpose, our study aimed to isolate, characterize, and assess the ability of endophytic actinobacteria to degrade crude petroleum, as well as to produce plant growth promoting traits. Seventeen endophytic actinobacteria were isolated from roots of plants grown naturally in sandy contaminated soil. Among them, six isolates were selected on the basis of their tolerance to petroleum on solid minimal medium and characterized by 16S rDNA gene sequencing. All petroleum-tolerant isolates belonged to the Streptomyces genus. Determination by crude oil degradation by gas chromatorgraph-flame ionization detector revealed that five strains could use petroleum as sole carbon and energy source and the petroleum removal achieved up to 98% after 7 days of incubation. These isolates displayed an important role in the degradation of the n-alkanes (C₆-C₃₀), aromatic and polycyclic aromatic hydrocarbons. All strains showed a wide range of plant growth promoting features such as siderophores, phosphate solubilization, 1-aminocyclopropane-1-carboxylate deaminase, nitrogen fixation and indole-3-acetic acid production as well as biosurfactant production. This is the first study highlighting the petroleum degradation ability and plant growth promoting attributes of endophytic Streptomyces. The finding suggests that the endophytic actinobacteria isolated are promising candidates for improving phytoremediation efficiency of petroleum contaminated soil.

N-acyl-homoserine lactone dynamics during biofilm formation of a 1,2,4-trichlorobenzene mineralizing community on clay

In Gram-negative bacteria, quorum sensing systems are based on the N-acyl-homoserine lactone (AHL) molecule. The objective of this study was to investigate the role of quorum sensing systems during biofilm formation by a microbial community while degrading the pollutant. Our model system included 1,2,4-trichlorobenzene (1,2,4-TCB) and its mineralizing Gram-negative bacterial community to investigate the relationships between AHL dynamics, cell growth and pollutant degradation. Biomineralization of 1,2,4-TCB was monitored for both the planktonic bacterial community with and without sterile clay particles in liquid cultures. The bacterial growth and production of AHLs were quantified by fluorescent in situ hybridization and immunoassay analysis, respectively. A rapid production of AHLs which occurred coincided with the biofilm formation and the increase of mineralization rate of 1,2,4-TCB in liquid cultures. There is a positive correlation between the cell density of Bodertella on the clay particles and mineralization rate of 1,2,4-TCB. 3-oxo-C_12:1-HSL appears to be the dominant AHL with the highest intensity and rapidly degraded by the bacterial community via two main consecutive reactions (lactone hydrolysis and decarboxylic reaction). These findings suggest that the integrated AHLs and their degraded products play a crucial role in biofilm formation and biomineralization of 1,2,4-TCB in culture.

Functional and genetic characterization of hydrocarbon biodegrader and exopolymer-producing clones from a petroleum reservoir metagenomic library

Microbial degradation of petroleum is a worldwide issue, which causes physico-chemical changes in its compounds, diminishing its commercial value. Biosurfactants are chemically diverse molecules that can be produced by several microorganisms and can enable microbial access to hydrocarbons. In order to investigate both microbial activities, function-driven screening assays for biosurfactant production and hydrocarbon biodegradation were carried out from a metagenomic fosmid library. It was constructed from the total DNA extracted from aerobic and anaerobic enrichments from a Brazilian biodegraded petroleum sample. A sum of 10 clones were selected in order to evaluate their ability to produce exopolymers (EPS) with emulsifying activity, as well as to characterize the gene sequences, harbored by the fosmid clones, through 454 pyrosequencing. Functional analyses confirmed the ability of some clones to produce surfactant compounds. Regarding hydrocarbon as microbial carbon sources, n-alkane (in mixture or not) and naphthalene were preferentially consumed as substrates. Analysis of sequence data set revealed the presence of genes related to xenobiotics biodegradation and carbohydrate metabolism. These data were corroborated by the results of hydrocarbon biodegradation and biosurfactant production detected in the evaluated clones.