Key structural features that determine the selectivity of UV/acetylacetone for the degradation of aromatic pollutants when compared to UV/H2O2

Efficient photochemical conversion of naproxen by butanedione: Role of energy transfer

Photochemical active species generated from photosensitizers, e.g., dissolved organic matter (DOM), play vital roles in the transformation of micropollutants in water. Here, butanedione (BD), a redox-active moiety in DOM and widely found in nature, was employed to photo-transform naproxen (NPX) with peracetic acid (PAA) and H2O2 as contrasts. The results obtained showed that the BD exhibited more applicable on NPX degradation. It works in the lake or river water under UV and solar irradiation, and its NPX degradation efficiency was 10-30 times faster than that of PAA and H2O2. The reason for the efficient transformation of pollutants is that the BD system was proved to be a non-free radical dominated mechanism. The quantum yield of BD (Ф254 nm) was calculated to be 0.064, which indicates that photophysical process is the dominant mode of BD conversion. By adding trapping agents, direct energy transfer from 3BD* to NPX (in anoxic environment) or dissolved oxygen (in aerobic environment) was proved to play a major role (> 91 %). Additionally, the BD process reduces the toxicity of NPX and promotes microbial growth after irradiation. Overall, this study significantly deepened the understanding of the transformation between BD and micropollutants, and provided a potential BD-based process for micropollutants removal under solar irradiation.

Catalytic Oxidation of Benzene over Atomic Active Site AgNi/BCN Catalysts at Room Temperature

Benzene is the typical volatile organic compound (VOC) of indoor and outdoor air pollution, which harms human health and the environment. Due to the stability of their aromatic structure, the catalytic oxidation of benzene rings in an environment without an external energy input is difficult. In this study, the efficient degradation of benzene at room temperature was achieved by constructing Ag and Ni bimetallic active site catalysts (AgNi/BCN) supported on boron-carbon-nitrogen aerogel. The atomic-scale Ag and Ni are uniformly dispersed on the catalyst surface and form Ag/Ni-C/N bonds with C and N, which were conducive to the catalytic oxidation of benzene at room temperature. Further catalytic reaction mechanisms indicate that benzene reacted with ·OH to produce R·, which reacted with O2 to regenerate ·OH. Under the strong oxidation of ·OH, benzene was oxidized to form alcohols, carboxylic acids, and eventually CO2 and H2O. This study not only significantly reduces the energy consumption of VOC catalytic oxidation, but also improves the safety of VOC treatment, providing new ideas for the low energy consumption and green development of VOC treatment.

Heterogeneous Photodegradation Behavior of Liquid Crystal Monomers in Dust: Quantitative Structure-Activity Relationship and Product Identification

The heterogeneous photodegradation behavior of liquid crystal monomers (LCMs) in standard dust (standard reference material, SRM 2583) and environmental dust was investigated. The measured photodegradation ratios for 23 LCMs in SRM and environmental dust in 12 h were 11.1 ± 1.8 to 23.2 ± 1.1% and 8.7 ± 0.5 to 24.0 ± 2.8%, respectively. The degradation behavior of different LCM compounds varied depending on their structural properties. A quantitative structure-activity relationship model for predicting the degradation ratio of LCMs in SRM dust was established, which revealed that the molecular descriptors related to molecular polarizability, electronegativity, and molecular mass were closely associated with LCMs' photodegradation. The photodegradation products of the LCM compound 4'-propoxy-4-biphenylcarbonitrile (PBIPHCN) in dust, including •OH oxidation, C-O bond cleavage, and ring-opening products, were identified by nontarget analysis, and the corresponding degradation pathways were suggested. Some of the identified products, such as 4'-hydroxyethoxy-4-biphenylcarbonitrile, showed predicted toxicity (with an oral rat lethal dose of 50%) comparable to that of PBIPHCN. The half-lives of the studied LCMs in SRM dust were estimated at 32.2-82.5 h by fitting an exponential decay curve to the observed photodegradation data. The photodegradation mechanisms of LCMs in dust were revealed for the first time, enhancing the understanding of LCMs' environmental behavior and risks.

Prediction of free radical reactions toward organic pollutants with easily accessible molecular descriptors

Machine learning (ML) is becoming an efficient tool for predicting the fate of aquatic contaminants owing to the preponderance of big data. However, whether ML can "learn" the differences in reactivity among different free radicals has not yet been tested. In this work, the effectiveness of combining ML algorithms with molecular fingerprints to predict the reactivity of three free radicals was evaluated. First, a dataset containing 211 organic pollutants and their respective rate constants with the carbonate radical (CO3•-) was used to develop predictive models using both linear regression and ML methods. The use of topological atomic alignment information, in the form of the molecular access system (MACCS) and Morgan Fingerprint, and the electronic structure features (energy levels of the lowest unoccupied and highest occupied molecular orbitals, ELUMO and EHOMO, and the energy gap between ELUMO and EHOMO) gave satisfactory predictive performances (ML model with Random Forest algorithm with MACCS: RMSEtest = 0.787; linear regression model with energy levels: RMSEtest = 0.641). Additionally, the model interpretation correctly described that the key reactivity features for CO3•- were relatively close to those for SO4•- rather than those for •OH. These results suggest that combination of ML algorithms with easily accessible molecular fingerprints would be a powerful tool to accurately predict the radical reactions towards organic compounds.

Acetylacetone effectively controlled the secondary metabolites of Microcystis aeruginosa under simulated sunlight irradiation

Inactivation of cyanobacterial cells and simultaneous control of secondary metabolites is of significant necessity for the treatment of cyanobacteria-laden water. Acetylacetone (AcAc) has been reported a specific algicide to inactivate Microcystis aeruginosa (M. aeruginosa) and an effective light activator to degrade pollutants. This study systematically investigated the photodegradation ability of AcAc under xenon (Xe) irradiation on the secondary metabolites of M. aeruginosa, mainly algal organic matter (AOM), especially toxic microcystin-LR (MC-LR). Results showed that AcAc outperformed H2O2 in destructing the protein-like substances, humic acid-like matters, aromatic proteins and fulvic-like substances of AOM. For MC-LR (250 µg/L), 0.05 mmol/L AcAc attained the same degradation efficiency (87.0%) as 0.1 mmol/L H2O2. The degradation mechanism of Xe/AcAc might involve photo-induced energy/electron transfer and formation of carbon center radicals. Alkaline conditions (pH > 9.0) were detrimental to the photoactivity of AcAc, corresponding to the observed degradation rate constant (k1 value) of MC-LR drastically decreasing to 0.0013 min-1 as solution pH exceeded 9.0. The PO43- and HCO3- ions had obvious inhibition effects, whereas NO3- slightly improved k1 value from 0.0277 min-1 to 0.0321 min-1. The presence of AOM did not significantly inhibit MC-LR degradation in Xe/AcAc system. In addition, the biological toxicity of MC-LR was greatly reduced after photoreaction. These results demonstrated that AcAc was an alternative algicidal agent to effectively inactivate algal cells and simultaneously control the secondary metabolites after cell lysis. Nevertheless, the concentration and irradiation conditions should be further optimized in practical application.

Alcohols radicals can efficiently reduce recalcitrant perfluorooctanoic acid

Alcohols are commonly used as eluents for the regeneration of per/poly-fluoroalkyl substances (PFASs) adsorbents, but their potential effects on the subsequent treatment of these eluates have not been fully explored. This work investigated the effect of alcohols on perfluorooctanoic acid (PFOA) degradation by persulfate (PS) based advanced oxidation processes. The results showed that ethanol significantly promoted PFOA degradation in thermal/PS system. Under anoxic conditions, 25.5±1.4% or 91.2±1.6% of PFOA was degraded within 48 h in the absence or presence of ethanol. Electron paramagnetic resonance (EPR) detection, free radical quenching experiments, and chemical probe studies clearly demonstrated that the sulfate radicals (SO4•-) generated from PS activation would react with ethanol to form alcohol radicals, which could efficiently degrade PFOA. The transformation pathways of PFOA were proposed based on degradation products analysis and density function theory (DFT) calculation. The reaction between SO4•- and other alcohols could also induce the formation of alcohol radicals and facilitate to the degradation of PFOA. This work represents the positive roles of alcohols in the degradation of PFASs, providing new insights into developing simple and efficient treatments for PFASs eluate or PFAS-contaminated water.

Effects of a redox-active diketone on the photochemical transformation of roxarsone: Mechanisms and environmental implications

Organoarsenical antibiotics pose a severe threat to the environment and human health. In aquatic environment, dissolved organic matter (DOM)-mediated photochemical transformation is one of the main processes in the fate of organoarsenics. Dicarbonyl is a typical redox-active moiety in DOM. However, the knowledge on the photoconversion of organoarsenics by DOM, especially the contributions of dicarbonyl moieties is still limited. Here, we systematically investigated the photochemical transformation of three organoarsenics with the simplest β-diketone, acetylacetone (AcAc), as a model dicarbonyl moiety of DOM. The presence of AcAc significantly enhanced the photochemical conversion of roxarsone (ROX), whereas only minor effects were observed for 3-amino-4-hydroxyphenylarsonic acid (HAPA) and arsanilic acid (ASA), because the latter two (with an amino (-NH₂) group) are more photoactive than ROX (with a nitro (-NO₂) group). The results demonstrate that AcAc was a potent photo-activator and the reduction of -NO₂ to -NH₂ might be a rate-limiting step in the phototransformation of ROX. At a 1:1 M ratio of AcAc to ROX, the photochemical transformation rate of ROX was increased by 7 folds. In O₂-rich environment, singlet oxygen, peroxide radicals, and ·OH were the main reactive species that led to the breakage of the C-As bond in ROX and the oxidation of the released arsono group to arsenate, whereas the triplet-excited state of AcAc (³AcAc*) and carbon-centered radicals from the photolysis of AcAc dominated in the reductive transformation of ROX. In anoxic environment, 3-amino-4-hydroxyphenylarsonic acid was one of the main reductive transformation intermediates of ROX, whose photolysis rate was about 35 times that of ROX. The knowledge obtained here is of great significance to better understand the fate of organoarsenics in natural environment.

Reducing properties of triplet state organic matter (3DOM*) probed via the transformation from chlorine dioxide to chlorite

The triplet states of dissolved organic matter (³DOM*) have been well known to oxidize various organic contaminants, but evidence of their reducing properties are largely scarce. In this work, chlorine dioxide (ClO₂) as a single-electron oxidant was used as a probe to evaluate the reduction property of ³DOM*. The reduction of ClO₂ to chlorite was observed in the solutions of model photosensitizers (i.e., 4-carboxybenzophenone, benzophenone, acetophenone, 3-methoxyacetophenone, naphthalene, and xanthone) during UV irradiation with the presence of ClO₂, though they are resistant to ClO₂ oxidation in the dark. The reducing property of the triplet states of photosensitizers was verified and their second-order reaction rate constants with ClO₂ were determined to be in the range of 1.45(± 0.03)× 10⁹ - 2.18(± 0.06) × 10⁹ M^-1 s^-1 at pH 7.0. The quenching tests excluded the role of other reactive species (e.g., HO^•, O(³P), Cl^•, ClO^• and HOCl/OCl^-, O₂^•- and e_aq^-) in ClO₂ reduction to chlorite when using model photosensitizers and DOM isolates. Chlorite formation was 48.1-90.4% and 4812.8-7721.8% higher during UV irradiation with the presence of ClO₂ and DOM than those without UV irradiation or without DOM present, respectively. The enhancement was attributed to the enhanced electron donating capacity (chlorite precursors) of DOM upon UV irradiation and also to ³DOM* acting as an electron donor reducing ClO₂ to chlorite. This study highlighted the important role of ³DOM* as a reductant.

Kinetics and mechanisms of the carbamazepine degradation in aqueous media using novel iodate-assisted photochemical and photocatalytic systems

The present study investigates the kinetics and mechanisms of carbamazepine (CBZ) degradation using a novel UV/iodate (IO₃^-) system for the first time and explores the influence of process conditions on its degradation. UV/IO₃^- showed high degradation efficiencies in a wide range of pHs, especially under neutral and acidic conditions, indicating that the system can be considered as a promising method to deal with effluents under various pH conditions. Radical scavenging experiments show that both iodine radicals (IO, IO₂ and IO₃) and hydroxyl radicals play an important role in CBZ degradation. Furthermore, the combination of UV/IO₃^- with TiO₂ was studied to explore the potential of the addition of IO₃^- to improve the efficiency of the conventional TiO₂ photocatalytic system. Scavenging experiments indicated that iodine radicals (IO, IO₂ and IO₃) were mainly involved in the degradation of CBZ in the UV/IO₃^-/TiO₂ system, and the reaction mechanism equations were proposed for the first time for the studied UV/IO₃^-/TiO₂ system. Several degradation products and four possible pathways of CBZ degradation were also elucidated using ultra-high-performance liquid chromatography in combination with a quadrupole time-of-flight mass spectrometer (Q-TOF MS). Respirometric tests indicated that the treatment has a positive impact on biomass behavior during subsequent biological purification, highlighting that the developed IO₃^--assisted AOPs are eco-friendly.

Regeneration and reuse of salt-tolerant zwitterionic polymer fluids by simple salt/water system

Highly-efficient separation of adsorbent and pollutant from chemical sludge is urgent for the recycled materials and chemical resources and minimization of sludge production in industry. Herein, an effortless and cost-efficient salt/water system is developed for efficient zwitterionic polymer/dye separation from chemical sludge. To achieve this aim, a novel salt-tolerant zwitterionic polymer (STZP) is synthesized through etherifying 2-chloro-4,6-bis(4-carboxyphenyl amino)-1,3,5-triazine onto corn starch. It is found that "all-surface-area" adsorption of dye can be achieved by in-situ sol-gel transition of STZP. Spent polymer fluid and solid-state dye can be easily regenerated and separated from sewage sludge by a simple salt/water system. At a high NaCl concentration (225 g/L), the separation factor between zwitterionic polymer and dye is up to 50.4, which is 50 times larger than that of salt-free solution. More importantly, the regenerated polymer fluids exhibit an outstanding reusability ability and can maintain over 92.8% decoloration efficiency for dyeing effluent after multiple adsorption-desorption cycles. This study thus provides a technically feasible and economically acceptable strategy for the recycling and reuse of polymer from hazardous textile sludge waste, greatly promising to achieve zero emissions toward conventional adsorption units.

UV-Induced Redox Conversion of Tellurite by Biacetyl

Tellurium (Te) is a rare element of great value, but it exists mainly in the toxic form of tellurite (Te^IV) in water. Effective approaches that are able to reduce the toxicity and recover Te from contaminated water are highly needed. Here, we developed a simple but effective way to reduce toxic Te^IV to widely applicable elemental Te⁰. With the combination of ultraviolet (UV) and biacetyl (BD), the oxidation state of Te could be feasibly changed from IV to 0 or VI. The consumption of dissolved oxygen (DO) was a key factor in the redox conversion of Te^IV. Under UV irradiation, BD was first cleaved to acetyl radicals, which could then combine with water molecules to form more reductive diol radicals or combine with DO to form strongly oxidative peroxide radicals. Even without deoxygenation, the UV/BD system could rapidly change from being oxidative to being reductive because of the fast depletion of DO. Owing to the high quantum yield of the acetyl radical, the reduction efficiency of the UV/BD system was about 1 order of magnitude higher than that of UV/sulfite and was more efficient than the commonly used biological methods. This work provides a proof of concept for the reduction of tellurite, which could have relevant implications for water treatment and resource recovery applications.