Cercosporin-bioinspired photoinactivation of harmful cyanobacteria under natural sunlight via bifunctional mechanisms

Synthetic Biology-based Construction of Unnatural Perylenequinones with Improved Photodynamic Anticancer Activities

The construction of structural complexity and diversity of natural products is crucial for drug discovery and development. To overcome high dark toxicity and poor photostability of natural photosensitizer perylenequinones (PQs) for photodynamic therapy, herein, we aim to introduce the structural complexity and diversity to biosynthesize the desired unnatural PQs in fungus Cercospora through synthetic biology-based strategy. Thus, we first elucidate the intricate biosynthetic pathways of class B PQs and reveal how the branching enzymes create their structural complexity and diversity from a common ancestor. This enables the rational reprogramming of cercosporin biosynthetic pathway in Cercospora to generate diverse unnatural PQs without chemical modification. Among them, unnatural cercosporin A displays remarkably low dark toxicity and high photostability with retention of great photodynamic anticancer and antimicrobial activities. Moreover, it is found that, unlike cercosporin, unnatural cercosporin A could be selectively accumulated in cancer cells, providing potential targets for drug development. Therefore, this work provides a comprehensive foundation for preparing unnatural products with customized functions through synthetic biology-based strategies, thus facilitating drug discovery pipelines from nature.

Unleashing the power of acetylacetone: Effective control of harmful cyanobacterial blooms with ecological safety

Harmful algal blooms resulting from eutrophication pose a severe threat to human health. Acetylacetone (AA) has emerged as a potential chemical for combatting cyanobacterial blooms, but its real-world application remains limited. In this study, we conducted a 42-day evaluation of AA's effectiveness in controlling blooms in river water, with a focus on the interplay between ecological community structure, organism functional traits, and water quality. At a concentration of 0.2 mM, AA effectively suppressed the growth of Cyanobacteria (88 %), Bacteroidia (49 %), and Alphaproteobacteria (52 %), while promoting the abundance of Gammaproteobacteria (5.0 times) and Actinobacteria (7.2 times) that are associated with the degradation of organic matter. Notably, after dosing of AA, the OD680 (0.07 ± 0.02) and turbidity (8.6 ± 2.1) remained at a satisfactory level. AA induced significant disruptions in two photosynthesis and two biosynthesis pathways (P < 0.05), while simultaneously enriching eight pathways of xenobiotics biodegradation and metabolism. This enrichment facilitated the reduction of organic pollutants and supported improved water quality. Importantly, AA treatment decreased the abundance of two macrolide-related antibiotic resistance genes (ARGs), ereA and vatE, while slightly increased the abundance of two aminoglycoside-related ARGs, aacA and strB. Overall, our findings establish AA as an efficient and durable algicide with favorable ecological safety. Moreover, this work contributes to the development of effective strategies for maintaining and restoring the health and resilience of aquatic ecosystems impacted by harmful algal blooms.

Designing a cercosporin-bioinspired bifunctional algicide with flocculation and photocatalysis for efficiently controlling harmful cyanobacterial blooms

Harmful cyanobacterial blooms (HCBs) are spreading in freshwater ecosystems worldwide, adversely affecting drinking water supplies, aquatic production, recreational and tourism activities. Therefore, the efficient and environmentally friendly method is still of interest to be developed to effectively control HCBs. Inspired by the excellent algicidal activity of cercosporin (CP), a novel metal-free algaecide SiO2@EDU@CP (EDU, N-ethyl-N'-(3-dimethylaminopropyl)urea) with flocculation and photoremoval functions, was successfully designed and prepared in one-step to simultaneously introduce CP and EDU on SiO2 nanoparticles. It could rapidly form algae flocs in 20 min with 97.1% flocculation rate, and remove Microcystis aeruginosa within 12 h with 91.0% algicidal rate under 23 W compact fluorescent light irradiation without any leaked CP detected. Additionally, odorant β-cyclocitral and toxin microcystin-LR were both photodegraded after treatment of SiO2@EDU@CP. Further mechanistic studies showed that the introduction of EDU significantly reversed the zeta potential of SiO2-COOH to achieve the flocculation through neutral charge, and the photophysical characterization of SiO2@EDU@CP revealed the improved charge separation ability to generate reactive oxygen species. More importantly, the utility of SiO2@EDU@CP was well demonstrated by its effectiveness for algae from Taihu Lake under natural sunlight and inability to regrow after treatment. This study not only establishes a bifunctional algicide SiO2@EDU@CP to efficiently control HCBs, but also provides design possibilities to develop more novel and efficient algicides for the better control of practical HCBs.

A theoretical protocol for the rational design of the bioinspired multifunctional hybrid material MIP@cercosporin

CONTEXT

Rational design of polymeric materials prepared with the molecular imprinting technology is gaining even more space, as it can provide the optimal conditions to direct the laboratory molecularly imprinting polymer (MIP) preparation, maximizing their efficiency while reducing costs and preparation time, when compared to try-and-error approaches. We perform a rational design of an MIP with specific cavities for cercosporin accommodation by means of computational tools. The main steps of an MIP preparation were simulated and it was found that the most appropriated functional monomer to be used in the MIP preparation for cercosporin is the acrylamide, while the most suitable crosslinking agent is found to be p-divinylbenzene. Also, the most suitable solvents to remove cercosporin from the cavity are those with low dielectric constant, such as chloroform. This kind of solvent can then be used in washing step, in the case of use the MIP for sensing destinations. On the other hand, solvents like water, which has high dielectric constants, can efficiently improve the interactions between cercosporin and the functional monomer acrylamide, being indicated when the objective is to attract or maintain the cercosporin inside the MIP cavity. Thus, a MIP@cercosporin hybrid material can be used in aqueous solutions more reliably, or even the cercosporin detection in this media can be favoured. In the selectivity analysis of the material prepared in this specific condition, the results point that this MIP can also detect elsinochrome A with high efficiency, and could be more selective for hypericin, altertoxin, hypocrelin A, and phleichrome mycotoxins.

METHOD

The main steps of a MIP synthesis were theoretically simulated trough density functional theory (DFT) calculations aiming to direct and optimize the synthesis and applications of the material before the bench tests. Initially, in order to choose the most suitable functional to be employed for cercosporin calculations, eight of the DFT functionals that had been previously used for cercosporin calculations in literature were tested, which were the LCWPBE, B3LYP, CAM-B3LYP, M062-X, mPW1PW91, PBE0, TPSSh, and ωb97Xd. The theoretical 1H NMR chemical shifts for cercosporin molecule were calculated and compared with experimental results to analyze the performance of the functionals. Of all these, the best results were obtained with the TPSSh functional, employing the 6-31G(d,p) basis set, and this level of theory was then used for all the following steps. All the simulations were performed by means of geometry optimizations and frequency calculations. Additionally, AIM calculations were employed for further analysis of the interactions between the chosen functional monomer and cercosporin template in step 1, which was functional monomer selection. In washing step, the calculations were done using implicit solvation model, and finally, in selectivity tests, the putative "solid" MIP was simulated by freezing the positions of the monomers after the template remotion, and then other structurally similar toxins were placed in its cavity for the geometry optimizations and frequency calculations.

Efficient Biosynthesis of Acidic/Lactonic Sophorolipids and Their Application in the Remediation of Cyanobacterial Harmful Algal Blooms

Cyanobacterial harmful algal blooms (CyanoHABs) pose significant threats to human health and natural ecosystems worldwide, primarily caused by water eutrophication, increased surface water temperature, and co-occurring microorganisms. Urgent action is needed to develop an eco-friendly solution to effectively curb the proliferation of CyanoHABs. Sophorolipids (SLs) are fully biodegradable biosurfactants synthesized by Starmerella bombicola. They can be classified into lactone and acid types. The lactone type displays strong antimicrobial activity, while the acid type exhibits good solubility, which make them ideal agents for mitigating CyanoHABs. Nevertheless, the broad utilization of SLs are hindered by their expensive production costs and the absence of effective genetic editing tools in the native host. In this study, we constructed recombinant strains capable of producing either acidic or lactonic SLs using the CRISPR-Cas9 gene editing system. The yields of acidic and lactonic SLs reached 53.64 g/L and 45.32 g/L in a shaking flask, respectively. In a 5 L fermenter, acidic SLs reached 129.7 g/L using low-cost glucose and rapeseed oil as substrates. The addition of 5 mg/L lactonic SLs effectively degraded cyanobacteria within 30 min, and a ratio of 8.25:1.75 of lactonic to acidic SLs showed the highest degradation efficiency. This study offers a safe and promising solution for CyanoHABs treatment.

Self-Immolative Polythiophene for Sunlight Inactivation of Harmful Cyanobacteria

Harmful cyanobacterial blooms and the released microcystins (MCs) caused serious environmental and public health concerns to drinking water safety. Photo-oxidation is an appealing treatment option and alternative to conventional flocculation and microbial antagonists, but the performances of current photosensitizers (either inorganic or organic) are unsatisfactory. Here, a polythiophene photosensitizer (PT10) with both high yield of reactive oxygen species (ROS) production (mainly ¹O₂, Φ_Δ = 0.51, > 8 h continuous generation) and moderate photostability was used as a powerful algaecide to inhibit Microcystis aeruginosa. Due to the positive charge of PT10, the algal cells were quickly flocculated, followed by efficient inactivation in 4 h under white light irradiation (96.7%, 10 mW/cm²). Meanwhile, PT10 was self-immolated in about 6 h. Upon biosafety evaluation with adult zebrafish, the low toxicity of PT10 and the degradation products of PT10 and algae (early logarithmic growth stage) were confirmed. In addition, microcystin-LR (MC-LR), a toxic microcystin that will be released during the destruction of the algal cells, was also degraded. Therefore, PT10-based photoinactivation of M. aeruginosa featured both high performance and low secondary pollution. In real-world aquatic systems, PT10 was confirmed to be capable of sunlight-assisted inactivation of M. aeruginosa and prevent algal blooms, thus making it appealing for environmental remediation.

Stimulating fungal cell wall integrity by exogenous β-glucanase to improve the production of fungal natural products

The low production of natural products (NPs) is still the critical restrictive factor in exploiting their potential large-scale applications and a barrier to isolating and identifying other meaningful products. Given that the stimulation of cell wall integrity (CWI) has become a novel strategy to modulate the production of microbial natural products, herein, exogenous β-glucanase treatment was developed as an external cell wall β-glucan stress to stimulate the fungal CWI, and then to improve the production of fungal NPs. It was found that the production of fungal NPs cercosporin and sophorolipids, biosynthesized by Cercospora sp. and Starmerella bombicola, respectively, was significantly improved by the treatment of β-glucanase under a controllable dose. Moreover, it demonstrated that β-glucanase had an ability to stimulate fungal CWI through slight fungal superficial damage, thus facilitating the secretion of NPs. We expected that this easy-operating method to stimulate fungal CWI could be feasible to improve more fungal NPs production. KEY POINTS: • Exogenous β-glucanase stimulated the fungal cell wall integrity • Changing fungal cell walls modulated natural product production • β-glucanase with potential universal effects on more fungal natural products.