Analysis of recombinant and modified proteins by capillary zone electrophoresis coupled with electrospray ionization tandem mass spectrometry

Advances in the analysis of proteins and peptides by capillary electrophoresis with matrix-assisted laser desorption/ionization and electrospray-mass spectrometry detection

High throughput, outstanding certainty in peptide/protein identification, exceptional resolution, and quantitative information are essential pillars in proteome research. Capillary electrophoresis (CE) coupled to mass spectrometry (MS) has proven to meet these requirements. Soft ionization techniques, such as matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), have paved the way for the story of success of CE-MS in the analysis of biomolecules and both approaches are subject of discussion in this article. Meanwhile, CE-MS is far away from representing a homogeneous field. Therefore the review will cover a vast area including the coupling of different modes of CE (capillary zone electrophoresis, capillary isoelectric foscusing, capillary electrochromatography, micellar electrokinetic chromatography, nonaqueous capillary electrophoresis) to MS as well as on-line preconcentration techniques (transient capillary isotachophoresis, solid-phase extraction, membrane preconcentration) applied to compensate for restricted detection sensitivity. Special attention is given to improvements in interfacing, namely addressing nanospray and coaxial sheath liquid design. Peptide mapping, collision-induced dissociation with subsequent tandem MS, and amendments in mass accuracy of instruments improve information validity gained from MS data. With 2-D on-line coupling of liquid chromatography (LC) and CE a further topic will be discussed. A special section is dedicated to recent attempts in establishing CE-ESI-MS in proteomics, in the clinical and diagnostic field, and in the food sector.

Interaction of Palladium(II) and Platinum(II) Complexes with Microperoxidase-11 Studied by Electrospray Mass Spectrometry and MS/MS Analysis

Interactions of cis-[Pd(en)(H(2)O)(2)](2+) (en, ethylenediamine) and cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) with microperoxidase-11 (MP-11) in a molar ratio of 1:1 or 2:1 at pH 1.4 were investigated via electrospray mass spectrometry and MS/MS analysis at room temperature and at 40 degrees C with an incubation time of 2 or 3 days. The composition of the Pd(II)- and Pt(II)-anchored MP-11 was confirmed on the basis of the precise molecular mass and the simulated isotope distribution pattern. MS/MS analysis revealed that the Pd(II) center anchored to the side chain of Cys7 as Pd(II) and MP-11 were mixed in an equimolar ratio and to side chains of Cys7 and Cys4 as Pd(II) and MP-11 mixed in a 2:1 molar ratio. When Pt(II) and MP-11 were mixed in a 2:1 molar ratio, Pt(II) first anchored to the side chain of Cys7, and then to the side chain of Cys4 with time. The initial coordination of Pd(II) and Pt(II) to the side chain of Cys7 is the essential step for the Pd(II)- and Pt(II)-promoted cleavage of the His8-Thr9 bond in MP-11. These results support the hypothesis that the Pd(II)-mediated cleavage of the His18-Thr19 bond in cytochorome c is due to the identical binding mode.

Separation and detection methods for covalent drug–protein adducts

Covalent binding of reactive metabolites of drugs to proteins has been a predominant hypothesis for the mechanism of toxicity caused by numerous drugs. The development of efficient and sensitive analytical methods for the separation, identification, quantification of drug-protein adducts have important clinical and toxicological implications. In the last few decades, continuous progress in analytical methodology has been achieved with substantial increase in the number of new, more specific and more sensitive methods for drug-protein adducts. The methods used for drug-protein adduct studies include those for separation and for subsequent detection and identification. Various chromatographic (e.g., affinity chromatography, ion-exchange chromatography, and high-performance liquid chromatography) and electrophoretic techniques [e.g., sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), two-dimensional SDS-PAGE, and capillary electrophoresis], used alone or in combination, offer an opportunity to purify proteins adducted by reactive drug metabolites. Conventionally, mass spectrometric (MS), nuclear magnetic resonance, and immunological and radioisotope methods are used to detect and identify protein targets for reactive drug metabolites. However, these methods are labor-intensive, and have provided very limited sequence information on the target proteins adducted, and thus the identities of the protein targets are usually unknown. Moreover, the antibody-based methods are limited by the availability, quality, and specificity of antibodies to protein adducts, which greatly hindered the identification of specific protein targets of drugs and their clinical applications. Recently, the use of powerful MS technologies (e.g., matrix-assisted laser desorption/ionization time-of-flight) together with analytical proteomics have enabled one to separate, identify unknown protein adducts, and establish the sequence context of specific adducts by offering the opportunity to search for adducts in proteomes containing a large number of proteins with protein adducts and unmodified proteins. The present review highlights the separation and detection technologies for drug-protein adducts, with an emphasis on methodology, advantages and limitations to these techniques. Furthermore, a brief discussion of the application of these techniques to individual drugs and their target proteins will be outlined.

Regioselective cleavage of myoglobin with copper(II) compounds at neutral pH

Selective hydrolytic cleavage of myoglobin was studied with CuCl2, Cu(ClO4)2, Cu(AC)2, and binuclear Cu(II) complexes of 3,6,9,16,19,22-hexaaza-6,19-bis (2-hydroxyethyl)-tricyclo- [22,2,2,2(11,14)]-triaconta-1,11,13,24,27,29-hexaene (1) and 3,6,9,16,19,22-hexaaza-tricyclo-[22,2,2,2(11,14)]-triaconta- 1,11,13,24,27,29-hexaene (2). The sites of cleavage were precisely determined by LC-ESIMS and further confirmed by an MS/MS method through fragmentation from both the N-terminal and C-terminal. The peptide bonds of Gln91-Ser92 and Ala94-Thr95 were remarkably cleaved by Cu(II) anchored to the side chain of the His93 residue. The data presented in this study show that Cu(II)-mediated cleavage of myoglobin is able to proceed at neutral pH, more selectively than Pd(II)-mediated cleavage, and buffer solution of phosphate and NH4HCO3 accelerates the cleavage reaction.

A robust approach for the analysis of peptides in the low femtomole range by capillary electrophoresis-tandem mass spectrometry

A capillary electrophoresis-tandem mass spectrometry (CE-MS/MS) approach has been developed for routine application in proteomic studies. Robustness of the coupling is achieved by using a standard coaxial sheath-flow sprayer. Thereby, greater stability than nanoelectrospray ionization-mass spectrometry coupling of sheathless capillary electrophoresis or nanoliquid chromatography (nano-LC) is achieved, resulting in stable operation for several weeks and unattended overnight sequences. The applied sheath flow is reduced to 1-2 microL/min in order to increase sensitivity. Standard peptides and those of digests of standard proteins and gel-separated proteins can be detected in the low femtomole range (full scan and MS/MS). Detection limits are found to be as low as 500 amol. Low femtomole amounts are required for unequivocal identification by MS/MS experiments in the ion trap and subsequent database search. By applying a simple pH-mediated stacking the concentration sensitivity can be lowered to some tens of fmol/microL (nM), depending on capillary size. This sensitivity is close to published values for sheathless CE-MS and nano-LC-MS, respectively (a comparison to reference values is presented). Moreover, with capillaries of about 50 cm in length separations in less than 10 min are possible resulting in a throughput of up to four analyses per hour. This is a factor of 4-12 times faster than nano-LC separation, being the state-of-the-art techniques for proteomic studies.

Capillary electrophoresis of proteins 1999-2001

This review article with 223 references describes recent developments in capillary electrophoresis (CE) of proteins and covers papers published during last two years, from the previous review (V. Dolnik, Electrophoresis 1999, 20, 3106-3115) through Spring 2001. It describes the topics related to CE of proteins including modeling of the electrophoretic properties of proteins, sample pretreatment, wall coatings, improving selectivity, detection, special electrophoretic techniques, and applications.

Review applications of capillary electrophoresis to the analysis of biotechnology-derived therapeutic proteins

The number of proteins produced by recombinant DNA technology continues to grow at a rapid pace. In this review, the emphasis is on proteins that are of therapeutic interest. Aspects of protein analysis, such as glycoform separation of proteins produced in mammalian cells and the separation of oligosaccharides for structure elucidation, are covered. The use of antibodies as therapeutic proteins is growing and currently antibodies are the largest class of proteins produced by biotechnology. This has merited a separate section on analysis of antibodies by capillary electrophoresis (CE). Applications of mass spectrometry as an ancillary technique, used in conjunction with CE, are also covered briefly. This review covers the literature since 1999.