Antimicrobial Peptides and Macromolecules for Combating Microbial Infections: From Agents to Interfaces

Non-canonical amino acid bioincorporation into antimicrobial peptides and its challenges

The rise of antimicrobial resistance and multi-drug resistant pathogens has necessitated explorations for novel antibiotic agents as the discovery of conventional antibiotics is becoming economically less viable and technically more challenging for biopharma. Antimicrobial peptides (AMPs) have emerged as a promising alternative because of their particular mode of action, broad spectrum and difficulty that microbes have in becoming resistant to them. The AMPs bacitracin, gramicidin, polymyxins and daptomycin are currently used clinically. However, their susceptibility to proteolytic degradation, toxicity profile, and complexities in large-scale manufacture have hindered their development. To improve their proteolytic stability, methods such as integrating non-canonical amino acids (ncAAs) into their peptide sequence have been adopted, which also improves their potency and spectrum of action. The benefits of ncAA incorporation have been made possible by solid-phase peptide synthesis. However, this method is not always suitable for commercial production of AMPs because of poor yield, scale-up difficulties, and its non-'green' nature. Bioincorporation of ncAA as a method of integration is an emerging field geared towards tackling the challenges of solid-phase synthesis as a green, cheaper, and scalable alternative for commercialisation of AMPs. This review focusses on the bioincorporation of ncAAs; some challenges associated with the methods are outlined, and notes are given on how to overcome these challenges. The review focusses particularly on addressing two key challenges: AMP cytotoxicity towards microbial cell factories and the uptake of ncAAs that are unfavourable to them. Overcoming these challenges will draw us closer to a greater yield and an environmentally friendly and sustainable approach to make AMPs more druggable.

A review of recent advancement in covalent organic framework (COFs) synthesis and characterization with a focus on their applications in antibacterial activity

The primary objective of this review is to present a comprehensive examination of the synthesis, characterization, and antibacterial applications of covalent organic frameworks (COFs). COFs represent a distinct category of porous materials characterized by a blend of advantageous features, including customizable pore dimensions, substantial surface area, and adaptable chemical properties. These attributes position COFs as promising contenders for various applications, notably in the realm of antibacterial activity. COFs exhibit considerable potential in the domain of antibacterial applications, owing to their amenability to functionalization with antibacterial agents. The scientific community is actively exploring COFs that have been imbued with metal ions, such as copper or silver, given their observed robust antibacterial properties. These investigations strongly suggest that COFs could be harnessed effectively as potent antibacterial agents across a diverse array of applications. Finally, COFs hold immense promise as a novel class of materials for antibacterial applications, shedding light on the synthesis, characterization, and functionalization of COFs tailored for specific purposes. The potential of COFs as effective antibacterial agents beckons further exploration and underscores their potential to revolutionize antibacterial strategies in various domains.

Hyperbranched Poly-L-Lysine-Based Water-Insoluble Complexes as Antibacterial Agents with Efficient Antibacterial Activity And Cytocompatibility

Despite the advances in technology, bacterial infection associated with biomedical devices is still one of the most challenging issues in clinical practice. Incorporation of antimicrobial agents is regarded as an efficient way to combat medical device associated infectious. However, most of antimicrobial agents have high toxicity to host cells. Thus, fabrication of novel antimicrobial agents that simultaneously fulfill the requirements of antibacterial activity as well as biocompatibility is urgently needed. Herein, a series of water-insoluble antibacterial complexes based on hyperbranched poly-L-lysine (HBPL) and four different surfactants through non-covalent interactions are developed. Such kinds of surfactants have great effects on the antibacterial property of poly(ɛ-caprolactone) (PCL) films that incorporate with the HBPL-based complexes. The results reveal that the PCL films that doped with HBPL/phosphate ester surfactant complexes showed the highest bacterial killing efficiency. Moreover, the cytocompatibility of the composite films is also investigated. Hemolysis experiments indicate that all the films  had low hemolytic activities. Considering the excellent antimicrobial and cytocompatibility properties, this work believes that the optimized complexes have great potential to be used as antimicrobial agents in biomedical field.

Structural Element of Vitamin U-Mimicking Antibacterial Polypeptide with Ultrahigh Selectivity for Effectively Treating MRSA Infections

Antimicrobial peptides (AMPs) exhibit mighty antibacterial properties without inducing drug resistance. Achieving much higher selectivity of AMPs towards bacteria and normal cells has always been a continuous goal to be pursued. Herein, a series of sulfonium-based polypeptides with different degrees of branching and polymerization were synthesized by mimicking the structure of vitamin U. The polypeptide, G2 -PM-1H+ , shows both potent antibacterial activity and the highest selectivity index of 16000 among the reported AMPs or peptoids (e.g., the known index of 9600 for recorded peptoid in "Angew. Chem. Int. Ed., 2020, 59, 6412."), which can be attributed to the high positive charge density of sulfonium and the regulation of hydrophobic chains in the structure. The antibacterial mechanisms of G2 -PM-1H+ are primarily ascribed to the interaction with the membrane, production of reactive oxygen species (ROS), and disfunction of ribosomes. Meanwhile, altering the degree of alkylation leads to selective antibacteria against either gram-positive or gram-negative bacteria in a mixed-bacteria model. Additionally, both in vitro and in vivo experiments demonstrated that G2 -PM-1H+ exhibited superior efficacy against methicillin-resistant Staphylococcus aureus (MRSA) compared to vancomycin. Together, these results show that G2 -PM-1H+ possesses high biocompatibility and is a potential pharmaceutical candidate in combating bacteria significantly threatening human health.

Four-Arm δ-Ornithine-Based Polypeptoids Resensitize Voriconazole against Azole-Resistant C. albicans

Worldwide Candida albicans infections cause a huge burden in healthcare and the efficacy of traditional antifungals is diminished because of the rapid development of antifungal resistance. It is necessary to develop new antifungals or new strategies to make multidrug-resistant (MDR) C. albicans to resensitize to existing antifungal drugs. In this work, a series of 4-arm polypeptoids (FAPs) were synthesized through grafting linear ε-l-lysine or δ-ornithine-based oligopeptides to a trimeric lysine core. The most potent 4R-O7 exhibited excellent activities toward three sensitive and two MDR C. albicans strains with MIC values as low as 24-48 μg/mL (vs 375 μg/mL for ε-polylysine, ε-PL). The mechanism studies revealed that 4R-O7 penetrated the cell membrane and generated ROS to kill cells. 4R-O7 exhibited a synergistic effect (FICI < 0.5) with voriconazole (VOR) and also assisted VOR to restore its efficacy to MDR C. albicans. In addition, the combined use of 4R-O7 and VOR significantly improved the elimination efficacy of mature C. albicans biofilms and enhanced the potency in a mouse subcutaneous C. albicans infection model.

Porous SnO2 nanosheets for room temperature ammonia sensing in extreme humidity

Gas sensors based on tin dioxide (SnO2) for the detection of ammonia (NH3) have become commercially available for environmental monitoring due to their reactive qualities when exposed to different gaseous pollutants. Nevertheless, their implementation in the medical field has been hindered by certain inherent drawbacks, such as needing to operate at high temperatures, lack of selectivity, unreliable operation under high-humidity conditions, and a lower detection limit. To counter these issues, this study created 2D nanosheets of SnO2 through an optimized solvothermal method. It was found that tuning the precursor solution's pH to either neutral or 14 led to aggregated or distributed, uniform-size nanosheets with a higher crystallinity, respectively. Remarkably, the SnO2 nanosheet sensor (SNS-14) displayed a much lower response to water molecules and specific reactivity to ammonia even when subjected to reducing and oxidizing agents at 25 °C due to the micropores and chemisorbed oxygen on the nanosheets. Furthermore, the SNS-14 was seen to have the highest sensitivity to ammonia at 100 ppm, with rapid response (8 s) and recovery times (55 s) even at a high relative humidity of 70%. Its theoretical detection limit was recorded to be 64 ppt, better than any of the earlier SnO2-based chemiresistive sensors. Its exceptional sensing abilities were credited to its optimal crystallinity, specific surface area, defects, chemisorbed oxygen, and porous structure. NH3-TPD measurements and computational simulations were employed to understand the ammonia interaction with atomistic details on the SnO2 nanosheet surface. A real time breath sensing experiment was simulated to test the efficacy of the sensor. Reaching this advancement is an achievement in bypassing past boundaries of SnO2-centered sensors, making it feasible to detect ammonia with enhanced precision, discrimination, dependability, and velocity for probable usages in medical diagnostics and ecological surveillance.

Ruthenium(II) polypyridyl complexes as emerging photosensitisers for antibacterial photodynamic therapy

Photodynamic therapy (PDT) has recently emerged as a potential valuable alternative to treat microbial infections. In PDT, singlet oxygen is generated in the presence of photosensitisers and oxygen under light irradiation of a specific wavelength, causing cytotoxic damage to bacteria. This review highlights different generations of photosensitisers and the common characteristics of ideal photosensitisers. It also focuses on the emergence of ruthenium and more specifically on Ru(II) polypyridyl complexes as metal-based photosensitisers used in antimicrobial photodynamic therapy (aPDT). Their photochemical and photophysical properties as well as structures are discussed while relating them to their phototoxicity. The use of Ru(II) complexes with recent advancements such as nanoformulations, combinatory therapy and photothermal therapy to improve on previous shortcomings of the complexes are outlined. Future perspectives of these complexes used in two-photon PDT, photoacoustic imaging and sonotherapy are also discussed. This review covers the literature published from 2017 to 2023.

Ring-opening metathesis polymerization of N-methylpyridinium-fused norbornenes to access antibacterial main-chain cationic polymers

Cationic polymers have been identified as a promising type of antibacterial molecules, whose bioactivity can be tuned through structural modulation. Recent studies suggest that the placement of the cationic groups close to the core of the polymeric architecture rather than on appended side chains might improve both their bioactivity and selectivity for bacterial cells over mammalian cells. However, antibacterial main-chain cationic polymers are typically synthesized via polycondensations, which do not afford precise and uniform molecular design. Therefore, accessing main-chain cationic polymers with high degrees of molecular tunability hinges upon the development of controlled polymerizations tolerating cationic motifs (or cation progenitors) near the propagating species. Herein, we report the synthesis and ring-opening metathesis polymerization (ROMP) of N-methylpyridinium-fused norbornene monomers. The identification of reaction conditions leading to a well-controlled ROMP enabled structural diversification of the main-chain cationic polymers and a study of their bioactivity. This family of polyelectrolytes was found to be active against both Gram-negative (Escherichia coli) and Gram-positive (Methicillin-resistant Staphylococcus aureus) bacteria with minimal inhibitory concentrations as low as 25 µg/mL. Additionally, the molar mass of the polymers was found to impact their hemolytic activity with cationic polymers of smaller degrees of polymerization showing increased selectivity for bacteria over human red blood cells.

Antimicrobial Peptide MPX with Broad-Spectrum Bactericidal Activity Promotes Proper Abscess Formation and Relieves Skin Inflammation

Bacteria have developed antibiotic resistance during the large-scale use of antibiotics, and multidrug-resistant strains are common. The development of new antibiotics or antibiotic substitutes has become an important challenge for humankind. MPX is a 14 amino acid peptide belonging to the MP antimicrobial peptide family. In this study, the antibacterial spectrum of the antimicrobial peptide MPX was first tested. The antimicrobial peptide MPX was tested for antimicrobial activity against the gram-positive bacterium S. aureus ATCC 25923, the gram-negative bacteria E. coli ATCC 25922 and Salmonella enterica serovar Typhimurium CVCC541, and the fungus Candida albicans ATCC 90029. The results showed that MPX had good antibacterial activity against the above four strains, especially against E. coli, for which the MIC was as low as 15.625 μg/mL. The study on the bactericidal mechanism of the antimicrobial peptide revealed that MPX can destroy the integrity of the cell membrane, increase membrane permeability, and change the electromotive force of the membrane, thereby allowing the contents to leak out and mediating bacterial death. A mouse acute infection model was used to evaluate the therapeutic effect of MPX after acute infection of subcutaneous tissue by S. aureus. The study showed that MPX could promote tissue repair in S. aureus infection and alleviate lung damage caused by S. aureus. In addition, skin H&E staining showed that MPX treatment facilitated the formation of appropriate abscesses at the subcutaneous infection site and facilitated the clearance of bacteria by the skin immune system. The above results show that MPX has good antibacterial activity and broad-spectrum antibacterial potential and can effectively prevent the invasion of subcutaneous tissue by S. aureus, providing new ideas and directions for the immunotherapy of bacterial infections.

Optimized Charge/Hydrophobicity Balance of Antimicrobial Peptides Against Polymicrobial Abdominal Infections

Antimicrobial peptides (AMPs) potentially serve as ideal antimicrobial agents for the treatment of polymicrobial abdominal infections due to their broad-spectrum antimicrobial activity and excellent biocompatibility. However, the balance of chain length, positive charges, and hydrophobicity on the antimicrobial activity of AMPs are still far from being optimal. Herein, a series of AMPs ([KX]n -NH2 , X = Ile, Leu or Phe, n = 3, 4, 5, or 6) with varied charges and hydrophobicity for the treatment of polymicrobial abdominal infections are designed. Specifically, [KI]4 -NH2 peptide exhibits the best in vitro antimicrobial activity against Gram-positive and -negative bacteria, as well as fungal strains. Based on the good cell biocompatibility, [KI]4 -NH2 peptide is found to have negligible in vivo toxicity at the dosage of up to 28 mg kg-1 . Furthermore, great in vivo therapeutic efficacy of [KI]4 -NH2 peptide against S. typhimurium is demonstrated in the mice abdominal infection model. The design of short sequence of antimicrobial peptides with a charge/hydrophobicity balanced structures provides a simple and efficient strategy for potential clinical applications of antimicrobial peptide-based biomaterials in a variety of bacterial infection diseases.

Multi-arm ε-polylysines exhibit broad-spectrum antifungal activities against Candida species

Invasive fungal infections pose a crucial threat to public health and are an under-recognized component of antimicrobial resistance, which is an emerging crisis worldwide. Here we designed and synthesized a panel of multi-arm ε-polylysines (ε-mPLs, nR-Km) with a precise number of n = 3-6 arms of ε-oligo(L-lysine)s and a precise arm length of m = 3-7 ε-lysine residues. ε-mPLs have good biocompatibility and exhibited broad-spectrum antifungal activities towards Aspergillus, Mucorales and Candida species, and their antifungal activities increased with residue arm length. Among these ε-mPLs, 3R-K7 showed high antifungal activity against C. albicans with a MIC value of as low as 24 μg mL-1 (only 1/16th that of ε-PL) and also exhibited similar antifungal activity towards the clinically isolated multi-drug resistant (MDR) C. albicans strain. Furthermore, 3R-K7 could inhibit the formation of C. albicans biofilms and kill the cells within mature C. albicans biofilms. Mechanistic studies proved that 3R-K7 killed fungal cells by entering the cells to generate reactive oxygen species (ROS) and induce cell apoptosis. An in vivo study showed that 3R-K7 significantly increased the survival rate of mice in a systemic murine candidiasis model, demonstrating that ε-mPL has great potential as a new antifungal agent.

Advances in Transdermal Delivery of Antimicrobial Peptides for Wound Management: Biomaterial-Based Approaches and Future Perspectives

Antimicrobial peptides (AMPs), distinguished by their cationic and amphiphilic nature, represent a critical frontier in the battle against antimicrobial resistance due to their potent antimicrobial activity and a broad spectrum of action. However, the clinical translation of AMPs faces hurdles, including their susceptibility to degradation, limited bioavailability, and the need for targeted delivery. Transdermal delivery has immense potential for optimizing AMP administration for wound management. Leveraging the skin's accessibility and barrier properties, transdermal delivery offers a noninvasive approach that can circumvent systemic side effects and ensure sustained release. Biomaterial-based delivery systems, encompassing nanofibers, hydrogels, nanoparticles, and liposomes, have emerged as key players in enhancing the efficacy of transdermal AMP delivery. These biomaterial carriers not only shield AMPs from enzymatic degradation but also provide controlled release mechanisms, thereby elevating stability and bioavailability. The synergistic interaction between the transdermal approach and biomaterial-facilitated formulations presents a promising strategy to overcome the multifaceted challenges associated with AMP delivery. Integrating advanced technologies and personalized medicine, this convergence allows the reimagining of wound care. This review amalgamates insights to propose a pathway where AMPs, transdermal delivery, and biomaterial innovation harmonize for effective wound management.

Surface charge adaptive nitric oxide nanogenerator for enhanced photothermal eradication of drug-resistant biofilm infections

Due to protection of extracellular polymeric substances, the therapeutic efficiency of conventional antimicrobial agents is often impeded by their poor infiltration and accumulation in biofilm. Herein, one type of surface charge adaptable nitric oxide (NO) nanogenerator was developed for biofilm permeation, retention and eradication. This nanogenerator (PDG@Au-NO/PBAM) is composed of a core-shell structure: thermo-sensitive NO donor conjugated AuNPs on cationic poly(dopamine-co-glucosamine) nanoparticle (PDG@Au-NO) served as core, and anionic phenylboronic acid-acryloylmorpholine (PBAM) copolymer was employed as a shell. The NO nanogenerator featured long circulation and good biocompatibility. Once the nanogenerator reached acidic biofilm, its surface charge would be switched to positive after shell dissociation and cationic core exposure, which was conducive for the nanogenerator to infiltrate and accumulate in the depth of biofilm. In addition, the nanogenerator could sustainably generate NO to disturb the integrity of biofilm at physiological temperature, then generate hyperthermia and explosive NO release upon NIR irradiation to efficiently eradicate drug-resistant bacteria biofilm. Such rational design offers a promising approach for developing nanosystems against biofilm-associated infections.

Membrane interaction and selectivity of novel alternating cationic lipid-nanodisc assembling polymers

Synthetic polymer nanodiscs are self-assembled structures formed from amphipathic copolymers encapsulating membrane proteins and surrounding phospholipids into water soluble discs. These nanostructures have served as an analytical tool for the detergent free solubilisation and structural study of membrane proteins (MPs) in their native lipid environment. We established the polymer-lipid nanodisc forming ability of a novel class of amphipathic copolymer comprised of an alternating sequence of N-alkyl functionalised maleimide (AlkylM) of systematically varied hydrocarbon chain length, and cationic N-methyl-4-vinyl pyridinium iodide (MVP). Using a combination of physicochemical techniques, the solubilisation efficiency, size, structure and shape of DMPC lipid containing poly(MVP-co-AlkylM) nanodiscs were determined. Lipid solubilisation increased with AlkylM hydrocarbon chain length from methyl (MM), ethyl (EtM), n-propyl (PM), iso-butyl (IBM) through to n-butyl (BM) maleimide bearing polymers. More hydrophobic derivatives formed smaller sized nanodiscs and lipid ordering within poly(MVP-co-AlkylM) nanodiscs was affected by nanodisc size. In dye-release assays, shorter N-alkyl substituted polymers, particularly poly(MVP-co-EtM), exhibited low activities against eukaryotic mimetic POPC membrane and increased their liposome disruption as POPC : POPG membrane mixtures increased in their anionic POPG component, resembling the charge profile of bacterial membranes. These trends in membrane selectivity were transferred towards native cell systems in which gram-positive Staphylococcus aureus and gram-negative Acenobacter baumannii bacterial strains were relatively susceptible to disruption by hydrophobic n-butyl- and n-propyl-poly(MVP-co-AlkylM) derivatives compared to human red blood cells (HRBCs), with a more pronounced selectivity resulting from poly(MVP-co-PM). Such selective membrane interaction by less hydrophobic polymers provides a framework for polymer design towards applications including selective membrane component solubilisation, biosensing and antimicrobial development.

Enhancing Chemical Stability through Structural Modification of Antimicrobial Peptides with Non-Proteinogenic Amino Acids

Multidrug-resistant bacteria (MDRB) remain a significant threat to humanity, resulting in over 1.2 million deaths per year. To combat this problem effectively, the development of therapeutic agents with diverse mechanisms of action is crucial. Antimicrobial peptides (AMPs) have emerged as promising next-generation therapeutics to combat infectious diseases, particularly MDRB. By targeting microbial membranes and inducing lysis, AMPs can effectively inhibit microbial growth, making them less susceptible to the development of resistance. Numerous structural advancements have been made to optimize the efficacy of AMPs. Previously, we developed 17KKV-Aib, a derivative of the Magainin 2 (Mag2) peptide, by incorporating a,a-disubstituted amino acids (dAAs) to modulate its secondary structure. 17KKV-Aib demonstrated potent antimicrobial activity against Gram-positive and Gram-negative bacteria, including multidrug-resistant Pseudomonas aeruginosa (MDRP), with minimal hemolytic activity against human red blood cells. However, 17KKV-Aib faces challenges regarding its susceptibility to digestive enzymes, hindering its potential as an antimicrobial agent. In this study, we designed and synthesized derivatives of 17KKV-Aib, replacing Lys residues with 4-aminopiperidine-4-carboxylic acid (Api), which is a cyclized dAA residue possessing cationic properties on its side chain. We investigated the impact of Api substitution on the secondary structure, antimicrobial activity, hemolytic activity, and resistance to digestive enzymes. Our findings revealed that introducing Api residues preserved the helical structure and antimicrobial activity and enhanced resistance to digestive enzymes, with a slight increase in hemolytic activity.

Main-Chain Cationic Bile Acid Polymers Mimicking Facially Amphiphilic Antimicrobial Peptides

Antibiotic-resistant bacterial infections have led to an increased demand for antibacterial agents that do not contribute to antimicrobial resistance. Antimicrobial peptides (AMPs) with the facially amphiphilic structures have demonstrated remarkable effectiveness, including the ability to suppress antibiotic resistance during bacterial treatment. Herein, inspired by the facially amphiphilic structure of AMPs, the facially amphiphilic skeletons of bile acids (BAs) are utilized as building blocks to create a main-chain cationic bile acid polymer (MCBAP) with macromolecular facial amphiphilicity via polycondensation and a subsequent quaternization. The optimal MCBAP displays an effective activity against Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram-negative Escherichia coli, fast killing efficacy, superior bactericidal stability in vitro, and potent anti-infectious performance in vivo using the MRSA-infected wound model. MCBAP shows the low possibility to develop drug-resistant bacteria after repeated exposure, which may ascribe to the macromolecular facial amphiphilicity promoting bacterial membrane disruption and the generation of reactive oxygen species. The easy synthesis and low cost of MCBAP, the superior antimicrobial performance, and the therapeutic potential in treating MRSA infection altogether demonstrate that BAs are a promising group of building blocks to mimic the facially amphiphilic structure of AMPs in treating MRSA infection and alleviating antibiotic resistance.

Biocompatible cationic polypeptoids with antibacterial selectivity depending on hydrophobic carbon chain length

The overuse of antibiotics has triggered a new infection crisis and natural antimicrobial peptides (AMPs) have been extensively studied as an alternative to fight microorganisms. Polypeptoids, or polypeptide-biomimetics, offer similar properties to polypeptides and a highly tunable structure that has been synthesized by various methods such as ring opening polymerization (ROP) using N-carboxyanhydride monomers. Simultaneous high antibacterial activity and biocompatibility of a structure by efficient synthesis is desired in the application of those materials. Herein, a series of cationic polypeptoids (PNBs) with variable side chain lengths was obtained by introducing positive charges to the main chain in one step and preserving the backbone structure, namely polypeptoids (PNBM, PNBE, PNBB) with different end groups (methyl (M), ethyl (E), butyl (B)). To address the issue of infection in interventional biomedical implants, we report cost-effective modified polyurethane (PU) films (PU-PNBM, PU-PNBE, PU-PNBB) as physical-biological synergistic antibacterial surfaces that overcome problems such as steric hindrance and the solubility of the materials. Antibacterial selectivity was achieved by regulating the different side chain lengths. When methyl and ethyl were used as hydrophobic side chains, they can only selectively kill Gram-positive Staphylococcus aureus. PNBB, the most hydrophobic and with a butyl side chain can kill both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus and inhibit the growth of bacterial biofilms. Effective in both solution and modified substrate, its biocompatibility is not compromised while the antibacterial properties are substantially improved. Furthermore, PU-PNBB films demonstrated their potential in vivo antimicrobial efficiency in a model of S. aureus infection established on mouse skin. The synthesis route and the surface modification strategies are convenient, providing a solution to the problem of poor biocompatibility in antimicrobial surface applications and a strategy for the use of peptide polymers for targeted therapy after specific infections in the biomedical field.

Leaflet by Leaflet Synergistic Effects of Antimicrobial Peptides on Bacterial and Mammalian Membrane Models

Antimicrobial peptides (AMPs) offer significant hope in the fight against antibiotic resistance. Operating via a mechanism different from that of antibiotics, they target the microbial membrane and ideally should damage it without impacting mammalian cells. Here, the interactions of two AMPs, magainin 2 and PGLa, and their synergistic effects on bacterial and mammalian membrane models were studied using electrochemical impedance spectroscopy, atomic force microscopy (AFM), and fluorescence correlation spectroscopy. Toroidal pore formation was observed by AFM when the two AMPs were combined, while individually AMP effects were confined to the exterior leaflet of the bacterial membrane analogue. Using microcavity-supported lipid bilayers, the diffusivity of each bilayer leaflet could be studied independently, and we observed that combined, the AMPs penetrate both leaflets of the bacterial model but individually each peptide had a limited impact on the proximal leaflet of the bacterial model. The impact of AMPs on a ternary, mammalian mimetic membrane was much weaker.

Amphiphilic Nano-Swords for Direct Penetration and Eradication of Pathogenic Bacterial Biofilms

Bacterial biofilms are major causes of persistent and recurrent infections and implant failures. Biofilms are formable by most clinically important pathogens worldwide, such as Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, causing recalcitrance to standard antibiotic therapy or anti-biofilm strategies due to amphiphilic impermeable extracellular polymeric substances (EPS) and the presence of resistant and persistent bacteria within the biofilm matrix. Herein, we report our design of an oligoamidine-based amphiphilic "nano-sword" with high structural compacity and rigidity. Its rigid, amphiphilic structure ensures effective penetration into EPS, and the membrane-DNA dual-targeting mechanism exerts strong bactericidal effect on the dormant bacterial persisters within biofilms. The potency of this oligoamidine is shown in two distinct modes of application: it may be used as a coating agent for polycaprolactone to fully inhibit surface biofilm growth in an implant-site mimicking micro-environment; meanwhile, it cures model mice of biofilm infections in various ex vivo and in vivo studies.

Versatile Magnetic Mesoporous Carbon Derived Nano-Adsorbent for Synchronized Toxic Metal Removal and Bacterial Disinfection from Water Matrices

Contamination of water resources by toxic metals and opportunistic pathogens remains a serious challenge. The development of nano-adsorbents with desired features to tackle this problem is a continuously evolving field. Here, magnetic mesoporous carbon nanospheres grafted by antimicrobial polyhexamethylene biguanidine (PHMB) are reported. Detailed mechanistic investigations reveal that the electrostatic stabilizer modified magnetic nanocore interfaced mesoporous shell can be programmatically regulated to tune the size and related morphological properties. The core-shell nano-adsorbent shows tailorable shell thickness (≈20-55 nm), high surface area (363.47 m² g^-1 ), pore volume (0.426 cm³ g^-1 ), radially gradient pores (11.26 nm), and abundant biguanidine functionality. Importantly, the nano-adsorbent has high adsorption capacity for toxic thallium (Tl(I) ions (≈559 mg g^-1 ), excellent disinfection against Staphylococcus aureus and Escherichia coli (>99.99% at 2 and 2.5 µg mL^-1 ), ultrafast disinfection kinetics rate (>99.99% within ≈4 min), and remarkable regeneration capability when exposed to polluted water matrices. The Tl(I) removal is attributed to surface complexation and physical adsorption owing to open ended mesopores, while disinfection relies on contact of terminal biguanidines with phospholipid head groups of membrane. The significance of this work lies in bringing up effective synchronic water purification technology to combat pathogenic microorganisms and toxic metal.

Theranostic FRET Gate to Visualize and Quantify Bacterial Membrane Breaching

Designing new antimicrobial-cum-probes to study real-time bacterial membrane breaching and concurrently developing inquisitorial image-based analytical tools is essential for the treatment of infectious diseases. An array of aggregation-induced emission (AIE) polymers (donor) consisting of neutral, anionic, and cationic charges were designed and employed as antimicrobial theranostic gatekeepers for the permeabilization of the peptidoglycan layer-adherable crystal violet (CV, acceptor). An AIE-active tetraphenylethylene (TPE)-tagged polycaprolactone biodegradable platform was chosen, and their self-assembled tiny amphiphilic nanoparticles were employed as a gatekeeper in the construction of bacterial membrane-reinforced fluorescent resonance energy transfer (FRET) probes. Electrostatic adhering of the cationic AIE polymer and subsequent gate opening aided fluorescent FRET probe activation on the membrane of Gram-negative bacteria, Escherichia coli. The selective photoexcitation energy transfer process in confocal microscopy experiments facilitated the building of a visualization-based FRET assay for the quantification of bactericidal activity. Nonantimicrobial AIE polymers (neutral and anionic) did not breach the bacterial membrane, resulting in no FRET signal. Detailed photophysical studies were done to establish the FRET probe mechanism, and a proof of concept was established.

Antibacterial Activity on Orthopedic Clinical Isolates and Cytotoxicity of the Antimicrobial Peptide Dadapin-1

In orthopedic surgery, biomaterial-associated infections represent a complication of serious concern. Most promising strategies to prevent these infections currently rely on the use of anti-infective biomaterials. Desirably, in anti-infective biomaterials, the antibacterial properties should be achieved by doping, grafting, or coating the material surfaces with molecules that are alternative to conventional antibiotics and exhibit a potent and highly specific activity against bacteria, without altering the biocompatibility. Antimicrobial peptides (AMPs) are among the most interesting candidate molecules for this biomaterial functionalization. Here, the potential expressed by the recently discovered peptide Dadapin-1 was explored by assaying its MIC, MBIC and MBC on clinical strains of relevant bacterial species isolated from orthopedic infections and by assessing its cytotoxicity on the human osteoblast-like MG63 cells. When appropriately tested in diluted Mueller Hinton Broth II (MHB II), Dadapin-1 exhibited significant antibacterial properties. MIC values were in the range of 3.1-6.2 µM for the gram-positive bacteria Staphylococcus aureus, Staphylococcus epidermidis, and Staphylococcus warneri, and 12.4-24.9 µM for the gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa. Interestingly, the peptide was found non-cytotoxic, with an IC50 exceeding the highest concentration tested of 179 µM. Overall, Dadapin-1 expresses considerable potential for future application in the production of anti-infective biomaterials.

Progress of polymer-based strategies in fungal disease management: Designed for different roles

Fungal diseases have posed a great challenge to global health, but have fewer solutions compared to bacterial and viral infections. Development and application of new treatment modalities for fungi are limited by their inherent essential properties as eukaryotes. The microorganism identification and drug sensitivity analyze are limited by their proliferation rates. Moreover, there are currently no vaccines for prevention. Polymer science and related interdisciplinary technologies have revolutionized the field of fungal disease management. To date, numerous advanced polymer-based systems have been developed for management of fungal diseases, including prevention, diagnosis, treatment and monitoring. In this review, we provide an overview of current needs and advances in polymer-based strategies against fungal diseases. We high light various treatment modalities. Delivery systems of antifungal drugs, systems based on polymers' innate antifungal activities, and photodynamic therapies each follow their own mechanisms and unique design clues. We also discuss various prevention strategies including immunization and antifungal medical devices, and further describe point-of-care testing platforms as futuristic diagnostic and monitoring tools. The broad application of polymer-based strategies for both public and personal health management is prospected and integrated systems have become a promising direction. However, there is a gap between experimental studies and clinical translation. In future, well-designed in vivo trials should be conducted to reveal the underlying mechanisms and explore the efficacy as well as biosafety of polymer-based products.

Antibody-Antimicrobial Conjugates for Combating Antibiotic Resistance

As the development of new antibiotics lags far behind the emergence of drug-resistant bacteria, alternative strategies to resolve this dilemma are urgently required. Antibody-drug conjugate is a promising therapeutic platform to delivering cytotoxic payloads precisely to target cells for efficient disease treatment. Antibody-antimicrobial conjugates (AACs) have recently attracted considerable interest from researchers as they can target bacteria in the target sites and improve the effectiveness of drugs (i.e., reduced drug dosage and adverse effects), abating the upsurge of antimicrobial resistance. In this review, the selection and progress of three essential blocks that compose the AACs: antibodies, antimicrobial payloads, and linkers are discussed. The commonly used conjugation strategies and the latest applications of AACs in recent years are also summarized. The challenges and opportunities of this booming technology are also discussed at the end of this review.

Milk Exosomes Facilitate Oral Delivery of Drugs against Intestinal Bacterial Infections

Biopharmaceutics Classification System (BCS) class II and IV drugs exhibit low solubility and suffer a limitation in oral administration. Exosomes have attracted intensive attention in the efficient delivery of such compounds. However, low gastrointestinal stability and high production cost of exosomes hinder their development as drug carriers. Here, milk exosomes are functionalized with phosphatidylserine and are capable of improving the solubility of BCS class II and IV drugs, resulting in facilitating the oral delivery of the drugs. A natural flavonoid, α-mangostin, is loaded into exosomes (AExo) to enhance the antibacterial efficiency, demonstrated by clearing 99% of bacteria in macrophages. Furthermore, AExo exhibits high mucus penetrability and shows a significant therapeutic efficacy in two animal infection models. Collectively, this work expands the application of exosomes from bovine milk with simple operation and low cost, shedding light on the potential of milk exosomes in improving the solubility of drugs to enhance the efficacy of oral administration.

Cell-Penetrating Antimicrobial Peptides with Anti-Infective Activity against Intracellular Pathogens

Cell-penetrating peptides (CPPs) are natural or engineered peptide sequences with the intrinsic ability to internalize into a diversity of cell types and simultaneously transport hydrophilic molecules and nanomaterials, of which the cellular uptake is often limited. In addition to this primordial activity of cell penetration without membrane disruption, multivalent antimicrobial activity accompanies some CPPs. Antimicrobial peptides (AMPs) with cell-penetrability exert their effect intracellularly, and they are of great interest. CPPs with antimicrobial activity (CPAPs) comprise a particular class of bioactive peptides that arise as promising agents against difficult-to-treat intracellular infections. This short review aims to present the antibacterial, antiparasitic, and antiviral effects of various cell-penetrating antimicrobial peptides currently documented. Examples include the antimicrobial effects of different CPAPs against bacteria that can propagate intracellularly, like Staphylococcus sp., Streptococcus sp., Chlamydia trachomatis, Escherichia coli, Mycobacterium sp., Listeria sp., Salmonella sp. among others. CPAPs with antiviral effects that interfere with the intracellular replication of HIV, hepatitis B, HPV, and herpes virus. Additionally, CPAPs with activity against protozoa of the genera Leishmania, Trypanosoma, and Plasmodium, the etiological agents of Leishmaniasis, Chagas' Disease, and Malaria, respectively. The information provided in this review emphasizes the potential of multivalent CPAPs, with anti-infective properties for application against various intracellular infections. So far, CPAPs bear a promise of druggability for the translational medical use of CPPs alone or in combination with chemotherapeutics. Moreover, CPAPs could be an exciting alternative for pharmaceutical design and treating intracellular infectious diseases.

Layer-by-layer assembly of peptides-decorated coaxial nanofibrous membranes with antibiofilm and visual pH sensing capability

The countermeasure of biofilm infections leaving a challenge due to a dense antibiotic-resistant barrier formed by extracellular polymeric substances (EPS). Although antibiotic alternative methods have been developed to combat biofilms, develop effective remedies coupling with timely feedback about the therapeutic effect are still in urgent demand. To this end, we construct an intelligent coaxial electrospun nanofibrous membranes (ENMs) that integrated therapy of infections and in situ visualized diagnosis. Specifically, pH-sensitive alizarin was incorporated into polyamide 6 to subtly consist core layer and curcumin (Cur) was formulated with degradable polyglycolic acid (PGA) to composed of the shell layer. The shell layer can gradually release curcumin along with the degradation of PGA. Moreover, epsilon-poly-_L-lysine (ε-PL) was deposited on coaxial ENMs via layer-by-layer self-assembly technique to disturb EPS integrity. As a result of the treatment, two different Gram-positive and Gram-negative bacteria displayed increased susceptibility to the drug hybrids. The degradation of PGA would trigger a sustained release of Cur and ε-PL, and once the core layer exposing, the acidic microenvironment of Staphylococcus aureus and Pseudomonas aeruginosa biofilm could be detected in situ by emerging visualized color change to timely feedback. Besides, the ENMs showed good biocompatibility. It paves a feasible and effective avenue for constructing a facile treatment and diagnosis platform for wound biofilm infections.

Enzyme-triggered smart antimicrobial drug release systems against bacterial infections

The rapid emergence and spread of drug-resistant bacteria, as one of the most pressing public health threats, are declining our arsenal of available antimicrobial drugs. Advanced antimicrobial drug delivery systems that can achieve precise and controlled release of antimicrobial agents in the microenvironment of bacterial infections will retard the development of antimicrobial resistance. A variety of extracellular enzymes are secreted by bacteria to destroy physical integrity of tissue during their invasion of host body, which can be utilized as stimuli to trigger "on-demand" release of antimicrobials. In the past decade, such bacterial enzyme responsive drug release systems have been intensively studied but few review has been released. Herein, we systematically summarize the recent progress of smart antimicrobial drug delivery systems triggered by bacteria secreted enzymes such as lipase, hyaluronidase, protease and antibiotic degrading enzymes. The perspectives and existing key issues of this field will also be discussed to fuel the innovative research and translational application in the future.

Hydrophobic-hydrophilic Alternation: An effective Pattern to de novo Designed Antimicrobial Peptides

The antimicrobial peptide (AMP) is a class of molecules that are active against a variety of microorganisms, from bacterial and cancer cells to fungi. Most AMPs are natural products, as part of an organism's own defense system against harmful microbes. However, the growing prevalence of drug resistance has forced researchers to design more promising engineered antimicrobial agents. Inspired by the amphiphilic detergents, the hydrophobic-hydrophilic alternation pattern was considered to be a simple but effective way to de novo design AMPs. In this model, hydrophobic amino acids (leucine, isoleucine etc.) and hydrophilic amino acids (arginine, lysine etc.) were arranged in an alternating way in the peptide sequence. The majority of this type of peptides have a clear hydrophilic-hydrophobic interface, which allows the molecules to have good solubility in both water and organic solvents. When they come into contact with hydrophobic membranes, many peptides undergo a conformational transformation, facilitating themself to insert into the cellular envelope. Moreover, positive-charged peptide amphiphiles tended to have an affinity with negatively-charged membrane interfaces and further led to envelope damage and cell death. Herein, several typical design patterns have been reviewed. Though varying in amino acid sequence, they all basically follow the rule of alternating arrangement of hydrophilic and hydrophobic residues. Based on that, researchers synthesized some lead compounds with favorable antimicrobial activities and preliminarily investigated their possible mode of action. Besides membrane disruption, these AMPs are proven to kill microbes in multiple mechanisms. These results deepened our understanding of AMPs' design and provided a theoretical basis for constructing peptide candidates with better biocompatibility and therapeutic potential.

Design of Antimicrobial Peptides with Cell-Selective Activity and Membrane-Acting Mechanism against Drug-Resistant Bacteria

Antimicrobial peptides (AMPs) can combat drug-resistant bacteria with their unique membrane-disruptive mechanisms. This study aimed to investigate the antibacterial effects of several membrane-acting peptides with amphipathic structures and positional alterations of two tryptophan residues. The synthetic peptides exhibited potent antibacterial activities in a length-dependent manner against various pathogenic drug-resistant and susceptible bacteria. In particular, the location of tryptophan near the N-terminus of AMPs simultaneously increases their antibacterial activity and toxicity. Furthermore, the growth inhibition mechanisms of these newly designed peptides involve cell penetration and destabilization of the cell membrane. These findings provide new insights into the design of peptides as antimicrobial agents and suggest that these peptides can be used as substitutes for conventional antibiotics.

The antibacterial potency and antibacterial mechanism of a commercially available surface-anchoring quaternary ammonium salt (SAQAS)-based biocide in vitro

AIMS

To determine the antimicrobial potency of a surface-anchored quaternary ammonium salt (SAQAS)-based biocide during in vitro wet and dry fomite assays and to determine the mechanism of killing bacteria on the surface.

METHODS AND RESULTS

Wet and dry fomite assays were established in vitro for a commercially available biocide (SAQAS-A) applied to glass and low-density polyethylene (LDPE) surfaces. Both wet and dry fomite tests showed the active killing of Gram-positive and Gram-negative bacteria but not endospores. Assays measuring membrane permeability (ATP and DNA release), bacterial membrane potential and bacterial ROS production were correlated with the time-to-kill profiles to show SAQAS-A activity in suspension and applied to a surface.

CONCLUSIONS

SAQAS-A is an effective biocide against model strains of vegetative bacteria. The killing mechanism for SAQAS-A observed minimal membrane depolarization, a surge in ROS production and assessment of membrane permeability supported the puncture of cells in both suspension and surface attachment, leading to cell death.

SIGNIFICANCE AND IMPACT OF THE STUDY

SAQAS represents effective surface biocides against single challenges with bacteria through a mechanical killing ability that supports real-world application if their durability can be demonstrated to maintain residual activity.

Clickable Polysaccharides for Biomedical Applications: A Comprehensive Review

Recent advances in materials science and engineering highlight the importance of designing sophisticated biomaterials with well-defined architectures and tunable properties for emerging biomedical applications. Click chemistry, a powerful method allowing specific and controllable bioorthogonal reactions, has revolutionized our ability to make complex molecular structures with a high level of specificity, selectivity, and yield under mild conditions. These features combined with minimal byproduct formation have enabled the design of a wide range of macromolecular architectures from quick and versatile click reactions. Furthermore, copper-free click chemistry has resulted in a change of paradigm, allowing researchers to perform highly selective chemical reactions in biological environments to further understand the structure and function of cells. In living systems, introducing clickable groups into biomolecules such as polysaccharides (PSA) has been explored as a general approach to conduct medicinal chemistry and potentially help solve healthcare needs. De novo biosynthetic pathways for chemical synthesis have also been exploited and optimized to perform PSA-based bioconjugation inside living cells without interfering with their native processes or functions. This strategy obviates the need for laborious and costly chemical reactions which normally require extensive and time-consuming purification steps. Using these approaches, various PSA-based macromolecules have been manufactured as building blocks for the design of novel biomaterials. Clickable PSA provides a powerful and versatile toolbox for biomaterials scientists and will increasingly play a crucial role in the biomedical field. Specifically, bioclick reactions with PSA have been leveraged for the design of advanced drug delivery systems and minimally invasive injectable hydrogels. In this review article, we have outlined the key aspects and breadth of PSA-derived bioclick reactions as a powerful and versatile toolbox to design advanced polymeric biomaterials for biomedical applications such as molecular imaging, drug delivery, and tissue engineering. Additionally, we have also discussed the past achievements, present developments, and recent trends of clickable PSA-based biomaterials such as 3D printing, as well as their challenges, clinical translatability, and future perspectives.

Two plus One: Combination Therapy Tri-systems Involving Two Membrane-Disrupting Antimicrobial Macromolecules and Antibiotics

The escalating issue of multidrug-resistant (MDR) bacteria indicates the urgent need for new and effective strategies to combat this global health challenge. Here, we describe a new combinatorial approach that can be put forward for experimental therapy application against MDR bacteria. Specifically, we have developed a tri-system that includes the coadministration of two different membrane-disrupting-type antimicrobial agents─a synthetic antimicrobial polymer P and an antimicrobial peptide (AMP) colistin methanesulfonate (Col)─in conjunction with an antibiotic [doxycycline (Dox), rifampicin (Rif), or azithromycin (Azi)]. Traditionally, the administration of membrane-disrupting antimicrobial agents causes toxicity, but, in comparison, we demonstrated synergy and biocompatibility using this combinatorial approach. Checkerboard assays showed the occurrence of synergistic interactions in Col-Dox-P, Col-Rif-P, and Col-Azi-P tri-systems against wild-type and MDR Pseudomonas aeruginosa, with the Col-Dox-P system being the most effective. The ability to synergize thus enables the use of a lower dosage in combinations compared to the standalone agents. The tri-systems not only demonstrated bacteriostatic activity but were also bactericidal. For example, the Col-Dox-P system (at 8, 4, and 8 μg mL^-1, respectively) and the Col-Rif-P system (at 4, 8, and 16 μg mL^-1, respectively) were able to kill >99.999% of planktonic P. aeruginosa cells within 3 h of treatment. More importantly, an improvement of the therapeutic/selectivity index was achieved via combination therapy. Taking the Col-Dox-P system as an example, its biocompatibility with murine embryonic fibroblast cells was found to be comparable to that of polymer P alone despite the synergistic enhancement in antimicrobial activity of the combination. This resulted in a significant increase in selectivity by 16-fold for the Col-Dox-P combination system compared to P alone. Furthermore, the broad applicability of this tri-system strategy was demonstrated via the successful application of the AMP melittin in place of Col or P. Overall, this study sheds new insights on the application of membrane-disrupting antimicrobial agents in combination therapy and their potential for safer clinical use. Additionally, the information gathered in this study could inform the development of future combination therapy systems involving the simultaneous employment of multiple AMPs with antibiotics.

Host defense peptide mimicking cyclic peptoid polymers exerting strong activity against drug-resistant bacteria

Extensive use of antibiotics accelerates the emergence of drug-resistant bacteria and related infections. Host defense peptides (HDPs) have been studied as promising and potential therapeutic candidates. However, their clinical applications of HDPs are limited due to their high cost of synthesis and low stability upon proteolysis. Therefore, HDP mimics have become a new approach to address the challenge of bacterial resistance. In this work, we design the amphiphilic peptoid polymers by mimicking the positively charged and hydrophobic structures of HDPs and synthesize a series of cyclic peptoid polymers efficiently via the polymerization on α-amino acid N-substituted glycine N-carboxyanhydrides (α-NNCAs) using 1,8-diazabicycloundec-7-ene (DBU) as the initiator. The optimal cyclic peptoid polymer, poly(Naeg_0.7Npfbg_0.3)₂₀, displays strong antibacterial activities against drug-resistant bacteria, but low hemolysis and cytotoxicity. In addition, the mode-of-action study indicates that the antibacterial mechanism is associated with bacterial membrane interaction. Our study implies that HDP mimicking cyclic peptoid polymers have potential application in treating drug-resistant bacterial infections.

Polymeric Coatings and Antimicrobial Peptides as Efficient Systems for Treating Implantable Medical Devices Associated-Infections

Many infections are associated with the use of implantable medical devices. The excessive utilization of antibiotic treatment has resulted in the development of antimicrobial resistance. Consequently, scientists have recently focused on conceiving new ways for treating infections with a longer duration of action and minimum environmental toxicity. One approach in infection control is based on the development of antimicrobial coatings based on polymers and antimicrobial peptides, also termed as “natural antibiotics”.

Functionalized aliphatic polyketones with germicide activity

Surfaces coated by polyketones bearing quaternary ammonium compounds showed excellent bactericidal properties with antibacterial rate of 99%.

Antimicrobial Mechanisms of Biomaterials: From Macro to Nano

Overcoming the global concern of antibiotic resistance is one of the biggest challenge faced by scientists today and the key to tackle this issue of emerging infectious diseases is the...

A Degradable, Broad-Spectrum and Resistance-Resistant Antimicrobial Oligoguanidine as Disinfecting and Therapeutic Agent in Aquaculture

The threat of antibiotic resistance to community healthcare and global economy has raised extensive concern, and the over-use of antibiotics in animal husbandry plays a significant role in the occurrence...