Transparent, Antifreezing, Ionic Conductive Cellulose Hydrogel with Stable Sensitivity at Subzero Temperature

Tough, conductive hydrogels based on gelatin and oxidized sodium carboxymethyl cellulose as flexible sensors

Natural polymer-based hydrogels have been wildly used in electronic skin, health monitoring and human motion sensing. However, the construction of hydrogel with excellent mechanical strength and electrical conductivity totally using natural polymers still faces many challenges. In this paper, gelatin and oxidized sodium carboxymethylcellulose were used to synthesize a double-network hydrogel through the dynamic Schiff base bonds. Then, the mechanical strength of the hydrogel was further enhanced by immersing it in an ammonium sulfate solution based on the Hofmeister effect between gelatin and salt. Finally, the gelatin/oxidized sodium carboxymethylcellulose hydrogel exhibited high tensile properties (614 %), tensile fracture strength (2.6 MPa), excellent compressive fracture strength (64 MPa), and compressive toughness (4.28 MJ/m3). Also, the electrical conductivity reached 3.94 S/m. The hydrogel after salt soaked was fabricated as strain sensors, which could accurately monitor the movement of many joints in the human body, such as fingers, wrists, elbows, neck, and throat. Therefore, the designed hydrogel fully originated from natural polymers and has great application potential in motion detection and information recording.

Aqueous Cellulose Solution Adhesive

In the context of sustainable development, research on a biomass-based adhesive without chemical modification as a substitute for petroleum-based adhesive is now crucial. It turns out to be challenging to guarantee a simple and sustainable method to produce high-quality adhesives and subsequently manufacture multifunctional composites. Herein, the inherent properties of cellulose were exploited to generate an adhesive based on a cellulose aqueous solution. The adhesion is simple to prepare structurally and functionally complex materials in a single process. Cellulose-based daily necessities including straws, bags, and cups were prepared by adhering cellulose films, and smart devices like actuators and supercapacitors assembled by adhering hydrogels were also demonstrated. In addition, the composite boards bonded with natural biomass wastes, such as wood chips, displayed significantly stronger mechanical properties than the natural wood or commercial composite boards. Cellulose aqueous adhesives provide a straightforward, feasible, renewable, and inventive bonding technique for material shaping and the creation of multipurpose devices.

Humidity Adaptive Antifreeze Hydrogel Sensor for Intelligent Control and Human-Computer Interaction

Conductive hydrogels have emerged as ideal candidate materials for strain sensors due to their signal transduction capability and tissue-like flexibility, resembling human tissues. However, due to the presence of water molecules, hydrogels can experience dehydration and low-temperature freezing, which greatly limits the application scope as sensors. In this study, an ionic co-hybrid hydrogel called PBLL is proposed, which utilizes the amphoteric ion betaine hydrochloride (BH) in conjunction with hydrated lithium chloride (LiCl) thereby achieving the function of humidity adaptive. PBLL hydrogel retains water at low humidity (<50%) and absorbs water from air at high humidity (>50%) over the 17 days of testing. Remarkably, the PBLL hydrogel also exhibits strong anti-freezing properties (-80 °C), high conductivity (8.18 S m-1 at room temperature, 1.9 S m-1 at -80 °C), high gauge factor (GF approaching 5.1). Additionally, PBLL hydrogels exhibit strong inhibitory effects against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), as well as biocompatibility. By synergistically integrating PBLL hydrogel with wireless transmission and Internet of Things (IoT) technologies, this study has accomplished real-time human-computer interaction systems for sports training and rehabilitation evaluation. PBLL hydrogel exhibits significant potential in the fields of medical rehabilitation, artificial intelligence (AI), and the Internet of Things (IoT).

Compressible, anti-freezing, and ionic conductive cellulose/polyacrylic acid composite hydrogel prepared via AlCl3/ZnCl2 aqueous system as solvent and catalyst

From the perspective of environmental sustainability, introducing cellulose into ionic conductive hydrogel is an inevitable trend for the development of flexible conductive materials. We report a double-network cellulose/polyacrylic acid (Cel/PAA) composite hydrogel based on the dissolving of cellulose by AlCl3/ZnCl2 aqueous system. The Cel/PAA composite hydrogel consists of rigid cellulose chains and flexible polyacrylic acid, which synergistically realize the improvement of the mechanical properties. The AlCl3/ZnCl2 aqueous system not only serves as the green solvent for cellulose, but also the Al3+ and Zn2+ metal ions can be served as a catalyst to activate the initiator for polymerization of acrylic acid. Compared with pure cellulose hydrogel, the compression strain of the Cel/PAA composite hydrogel was significantly improved to 80 %, and its conductivity increased by 28.1 %. In addition, its compression stress was enhanced over 2 times than pure PAA hydrogel. The Cel/PAA composite hydrogel exhibits excellent anti-freezing (-45 °C), weight retention (90 %), and conductivity (2.70 S/m) properties, still maintaining transparency and storage stability in the extreme environment. This work presents a facile strategy to develop an ionic conductive cellulose-based composite hydrogel with good conductivity and mechanical properties, which shows potential for the application fields of flexible sensors and 3D-printing functional materials.

MXene-Mediated Cellulose Conductive Hydrogel with Ultrastretchability and Self-Healing Ability

Constructing natural polymers such as cellulose, chitin, and chitosan into hydrogels with excellent stretchability and self-healing properties can greatly expand their applications but remains very challenging. Generally, the polysaccharide-based hydrogels have suffered from the trade-off between stiffness of the polysaccharide and stretchability due to the inherent nature. Thus, polysaccharide-based hydrogels (polysaccharides act as the matrix) with self-healing properties and excellent stretchability are scarcely reported. Here, a solvent-assisted strategy was developed to construct MXene-mediated cellulose conductive hydrogels with excellent stretchability (∼5300%) and self-healability. MXene (an emerging two-dimensional nanomaterial) was introduced as emerging noncovalent cross-linking sites between the solvated cellulose chains in a benzyltrimethylammonium hydroxide aqueous solution. The electrostatic interaction between the cellulose chains and terminal functional groups (O, OH, F) of MXene led to cross-linking of the cellulose chains by MXene to form a hydrogel. Due to the excellent properties of the cellulose-MXene conductive hydrogel, the work not only enabled their strong potential in both fields of electronic skins and energy storage but provided fresh ideas for some other stubborn polymers such as chitin to prepare hydrogels with excellent properties.

Calcined Chitosan/Cellulous Aerogel Modified with Copper Oxide Nanoparticles as an Efficient Sorbent for the Optimized Removal of Formic Acid from Water

A porous aerogel sorbent was prepared by the carbonization of a biohydrogel consisting of cellulose and chitosan (CS/CE) biopolymers. The adsorbent was also modified with copper oxide nanoparticles to effectively remove formic acid from water in batch mode. Characterization techniques, including scanning electron microscopy, Fourier transform infrared, Brunauer-Emmett-Teller, and X-ray diffraction, were employed to study the prepared sorbents. The concentration of formic acid in the solution was exactly determined by using liquid chromatography. To achieve maximum removal efficiency, important process variables were optimized using a central composite design data-based algorithm. Under optimal conditions, i.e., the initial concentration of 167.98 mg/L, the amount of sorbent equal to 75.28 mg, the contact time of 10.41 min, and the sample volume of 22.56 mL, a maximum acid removal efficiency of 84% was obtained. The Langmuir isotherm model was appropriately fitted to the experimental data, which indicates the chemical interaction of the sorbent active sites with formic acid. An adsorption capacity of 116.28 mg/g was also attained. The adsorption followed a pseudo-second-order kinetic pattern. According to the thermodynamic criteria, the adsorption of formic acid on the copper oxide-modified aerogel was exothermic, entropy-reducing, and favorable at temperatures lower than 290 K. Based on the results, CS/CE hydrogels comprising CuO nanoparticles are promising precursors for synthesizing carbonized aerogel sorbents that are successful in removing formic acid from aqueous environments.

Strong and Ultra-tough Ionic Hydrogel Based on Hyperbranched Macro-Cross-linker: Influence of Topological Structure on Properties

The application of hydrogels often suffers from their inherent limitation of poor mechanical properties. Here, a carboxyl-functionalized and acryloyl-terminated hyperbranched polycaprolactone (PCL) was synthesized and used as a macro-cross-linker to fabricate a super strong and ultra-tough ionic hydrogel. The terminal acryloyl groups of hyperbranched PCL are chemically incorporated into the network to form covalent cross-links, which contribute to robust networks. Meanwhile, the hydrophobic domains formed by the spontaneous aggregation of PCL chains and coordination bonds between Fe3+ and COO- groups serve as dynamic non-covalent cross-links, which enhance the energy dissipation ability. Especially, the influence of the hyperbranched topological structure of PCL on hydrogel properties has been well investigated, exhibiting superior strengthening and toughening effects compared to the linear one. Moreover, the hyperbranched PCL cross-linker also endowed the ionic hydrogel with higher sensitivity than the linear one when used as a strain sensor. As a result, this well-designed ionic hydrogel possesses high mechanical strength, superior toughness, and well ionic conductivity, exhibiting potential applications in the field of flexible strain sensors.

Multimodal Wearable Ionoskins Enabling Independent Recognition of External Stimuli Without Crosstalk

Wearable ionoskins are one of the representative examples of the many useful applications offered by deformable stimuli-responsive sensory platforms. Herein, ionotronic thermo-mechano-multimodal response sensors are proposed, which can independently detect changes in temperature and mechanical stimuli without crosstalk. For this purpose, mechanically robust, thermo-responsive ion gels composed of poly(styrene-ran-n-butyl methacrylate) (PS-r-PnBMA, copolymer gelator) and 1-butyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([BMI][TFSI], ionic liquid) are prepared. The optical transmittance change arising from the lower critical solution temperature (LCST) phenomenon between PnBMA and [BMI][TFSI] is exploited to track the external temperature, creating a new concept of the temperature coefficient of transmittance (TCT). The TCT of this system (-11.5% °C-1 ) is observed to be more sensitive to temperature fluctuations than the conventional metric of temperature coefficient of resistance. The tailoring molecular characteristics of gelators selectively improved the mechanical robustness of the gel, providing an additional application opportunity for strain sensors. This functional sensory platform, which is attached to a robot finger, can successfully detect thermal and mechanical environmental changes through variations in the optical (transmittance) and electrical (resistance) properties of the ion gel, respectively, indicating the high practicality of on-skin multimodal wearable sensors.

Cellulose-Based Ionic Conductor: An Emerging Material toward Sustainable Devices

Ionic conductors (ICs) find widespread applications across different fields, such as smart electronic, ionotronic, sensor, biomedical, and energy harvesting/storage devices, and largely determine the function and performance of these devices. In the pursuit of developing ICs required for better performing and sustainable devices, cellulose appears as an attractive and promising building block due to its high abundance, renewability, striking mechanical strength, and other functional features. In this review, we provide a comprehensive summary regarding ICs fabricated from cellulose and cellulose-derived materials in terms of fundamental structural features of cellulose, the materials design and fabrication techniques for engineering, main properties and characterization, and diverse applications. Next, the potential of cellulose-based ICs to relieve the increasing concern about electronic waste within the frame of circularity and environmental sustainability and the future directions to be explored for advancing this field are discussed. Overall, we hope this review can provide a comprehensive summary and unique perspectives on the design and application of advanced cellulose-based ICs and thereby encourage the utilization of cellulosic materials toward sustainable devices.

Dual-Stimuli-Responsive and Anti-Freezing Conductive Ionic Hydrogels for Smart Wearable Devices and Optical Display Devices

Stimuli-responsive hydrogels are a class of important materials for the preparation of flexible sensors, but the development of UV/stress dual-responsive ion-conductive hydrogels with excellent tunability for wearable devices remains a major challenge. In this study, a dual-responsive multifunctional ion-conductive hydrogel (PVA-GEL-GL-Mo₇) with high tensile strength, good stretchability, outstanding flexibility, and stability is successfully fabricated. The prepared hydrogel has an excellent tensile strength of 2.2 MPa, high tenacity of 5.26 MJ/m³, favorable extensibility (522%), and high transparency of 90%. Importantly, the hydrogels have dual responsiveness to UV light and stress, allowing it to be used as a wearable device while responding differently to the UV intensity of different outdoor environments (hydrogels can show different levels of color when exposed to different light intensities of UV light) and can remain flexible at -50 and 85 °C (sensing at both -25 and 85 °C). Therefore, the hydrogels developed in this study have good prospects in different applications, such as flexible wearable devices, duplicate paper, and dual-responsive interactive devices.

Environmentally adaptive polysaccharide-based hydrogels and their applications in extreme conditions: A review

Polysaccharide hydrogels are one of the most promising hydrogel materials due to their inherent characteristics, including biocompatibility, biodegradability, renewability, and easy modification, and their structure and functional designs have been widely researched to adapt to different application scenarios as well as to broaden their application fields. As typical wet-soft materials, the high water content and water-absorbing ability of polysaccharide-based hydrogels (PHs) are conducive to their wide biomedical applications, such as wound healing, tissue repair, and drug delivery. In addition, along with technological progress, PHs have shown potential application prospects in some high-tech fields, including human-computer interaction, intelligent driving, smart dressing, flexible sensors, etc. However, in practical applications, due to the poor ability of PHs to resist freezing below zero, dehydration at high temperature, and acid-base/swelling-induced deformation in a solution environment, they are prone to lose their wet-soft peculiarities, including structural integrity, injectability, flexibility, transparency, conductivity and other inherent characteristics, which greatly limit their high-tech applications. Hence, reducing their freezing point, enhancing their high-temperature dehydration resistance, and improving their extreme solution tolerance are powerful approaches to endow PHs with multienvironmental adaptability, broadening their application areas. This report systematically reviews the study advances of environmentally adaptive polysaccharide-based hydrogels (EAPHs), comprising anti-icing hydrogels, high temperature/dehydration resistant hydrogels, and acid/base/swelling deformation resistant hydrogels in recent years. First, the construction methods of EAPHs are presented, and the mechanisms and properties of freeze-resistant, high temperature/dehydration-resistant, and acid/base/swelling deformation-resistant adaptations are simply demonstrated. Meanwhile, the features of different strategies to prepare EAPHs as well as the strategies of simultaneously attaining multienvironmental adaptability are reviewed. Then, the applications of extreme EAPHs are summarized, and some meaningful works are well introduced. Finally, the issues and future outlooks of PH environment adaptation research are elucidated.

Evaluation of Cellulose–MXene Composite Hydrogel Based Bio-Resistive Random Access Memory Material as Mimics for Biological Synapses

We report a memory device based on organic-inorganic hybrid cellulose-Ti₃C₂T_X MXene composite hydrogel (CMCH) as a switching layer sandwiched between Ag top and FTO bottom electrodes. The device (Ag/CMCH/FTO) was fabricated by a simple, solution-processed route and exhibits reliable and reproducible bipolar resistive switching. Multilevel switching behavior was observed at low operating voltages (±0.5 to ±1 V). Furthermore, the capacitive-coupled memristive characteristics of the device were corroborated with electrochemical impedance spectroscopy and this affirmed the filamentary conduction switching mechanism (LRS-HRS). The synaptic functions of the CMCH-based memory device were evaluated, wherein potentiation/depression properties over 8 × 10³ electric pulses were observed. The device also exhibited spike time-dependent plasticity-based symmetric Hebbian learning rule of a biological synapse. This hybrid hydrogel is expected to be a potential switching material for low-cost, sustainable, and biocompatible memory storage devices and artificial synaptic applications.

Dual Network Hydrogel with High Mechanical Properties, Electrical Conductivity, Water Retention and Frost Resistance, Suitable for Wearable Strain Sensors

With the progress of science and technology, intelligent wearable devices have become more and more popular in our daily life. Hydrogels are widely used in flexible sensors due to their good tensile and electrical conductivity. However, traditional water-based hydrogels are limited by shortcomings of water retention and frost resistance if they are used as the application materials of flexible sensors. In this study, the composite hydrogels formed by polyacrylamide (PAM) and TEMPO-Oxidized Cellulose Nanofibers (TOCNs) are immersed in LiCl/CaCl2/GI solvent to form double network (DN) hydrogel with better mechanical properties. The method of solvent replacement give the hydrogel good water retention and frost resistance, and the weight retention rate of the hydrogel was 80.5% after 15 days. The organic hydrogels still have good electrical and mechanical properties after 10 months, and can work normally at −20 °C, and has excellent transparency. The organic hydrogel show satisfactory sensitivity to tensile deformation, which has great potential in the field of strain sensors.

Cellulose based self-healing hydrogel through Boronic Ester connections for wound healing and antitumor applications

The application of biodegradable hydrogels in medical field has drawn great attention because their networked structure provided ideal spaces for drug loading and cell growth. In this research, the boronic acid was coupled onto carboxyethyl cellulose (CMC) to synthesize boronic acid grafted CMC (CMC-BA) conveniently and self-healing hydrogel was fabricated with polyvinyl alcohol (PVA) crosslinking through dynamic boronic ester bond. The CMC-BA/PVA hydrogel showed good biocompatibility and could be degraded by cellulase and in vivo. The hydrogel formed fast fit for localized injection to cover the irregular wounds and localize the antitumor drugs to the tumor site. The in vivo wound repairing experiment revealed the hydrogel could form airtight adhesion to the wound site to reduce blood loss and accelerate the wound repairing rate. The hydrogel as a drug release carrier also reduced the acute in vivo toxicity of DOX with antitumor performance well preserved through a controlled release profile. Based on the above advantages, the CMC-based hydrogel with boronic ester connection should have great potential in biomedical areas with profitable future.

Construction of Carboxymethyl Chitosan Hydrogel with Multiple Cross-linking Networks for Electronic Devices at Low Temperature

On the basis of the original hydrogen bonding interaction and physical entanglement, covalent cross-linking and ionic cross-linking were additionally introduced to construct a carboxymethyl chitosan/allyl glycidyl ether conductive hydrogel (CCH) through a one pot method by a graft reaction, an addition reaction, and simple immersion, successively. The multiple cross-linking networks significantly increased the strength of CCHs and endowed them with ionic conductivity and an antifreezing property at -40 °C, which showed stable, durable, and reversible sensitivity to finger bending activity at subzero temperature. The CCHs could even be assembled into a triboelectric nanogenerator (TENG) to provide electric energy, which demonstrated stability against temperature variation, multiple drawing, long-term storage, or large quantities of contact-separation motion cycles. CCH-TENG can also be used as a tactile sensor within the pressure range from 0.4 kPa to higher than 8000 kPa. This work provided a simple route to fabricate antifreezing conductive hydrogels based on carboxymethyl chitosan and to find potential applications in soft sensor devices under a low temperature environment.

Environmentally Stable, Stretchable, Adhesive, and Conductive Organohydrogels with Multiple Dynamic Interactions as High-Performance Strain and Temperature Sensors

Nowadays, with the rapid development of artificial intelligence, conductive hydrogel-based sensors play an increasingly vital role in health monitoring and temperature sensing. However, the perfect integration of the environmental stability and applied performance of the hydrogel has always been a challenging and significant problem. Herein, we report an environmentally tolerant, stretchable, adhesive, self-healing conductive gel through multiple dynamic interactions in the water/glycerol/ionic liquids medium, which can be used as a high-performance strain and temperature sensor. The random copolymer poly(acrylic acid-co-acetoacetoxyethyl methacrylate) interacts with the branched poly(ethylene imine) (PEI) and Zr⁴⁺ ions via the dynamic covalent enamine bonds, coordinations, and electrostatic interactions to improve stretchable (1300%), compressible, fatigue-resistant (1000 cycles at 50% strain), and self-healing performance (95%, 24 h). The combination of water/glycerol/ionic liquids imparts the resulting gel with excellent electrical conductivity, anti-drying, and anti-freezing performance. By means of the above excellent performance, the gel could be used as the flexible strain or pressure sensor with high sensitivity and stability for the detection of the movement, expression, handwriting, pronouncing, and electrocardiogram (ECG) signals in various models. Meanwhile, the resulting gel can be assembled as the temperature sensor to trace the change of temperature accurately and steadily, which has a wide operating window (0 to 100 °C), an ultralow detection limit (0.2 °C), and high sensitivity (2.1% °C^-1). It is believed that the strategy for the multifunction and high-performance gel will blaze a new trail for the smart device in health management, temperature detection, and information transmission under various environmental conditions.

Bioinspired Freeze-Tolerant Soft Materials: Design, Properties, and Applications

In nature, many biological organisms have developed the exceptional antifreezing ability to survive in extremely cold environments. Inspired by the freeze resistance of these organisms, researchers have devoted extensive efforts to develop advanced freeze-tolerant soft materials and explore their potential applications in diverse areas such as electronic skin, soft robotics, flexible energy, and biological science. Herein, a comprehensive overview on the recent advancement of freeze-tolerant soft materials and their emerging applications from the perspective of bioinspiration and advanced material engineering is provided. First, the mechanisms underlying the freeze tolerance of cold-enduring biological organisms are introduced. Then, engineering strategies for developing antifreezing soft materials are summarized. Thereafter, recent advances in freeze-tolerant soft materials for different technological applications such as smart sensors and actuators, energy harvesting and storage, and cryogenic medical applications are presented. Finally, future challenges and opportunities for the rapid development of bioinspired freeze-tolerant soft materials are discussed.

Antifreezing, Ionically Conductive, Transparent, and Antidrying Carboxymethyl Chitosan Self-Healing Hydrogels as Multifunctional Sensors

Through a simple strategy of immersion in a mixed solution of water/ethylene glycol (EG)/lithium chloride (LiCl), self-healing carboxymethyl chitosan (CA) hydrogels, that is, CA/N-vinylpyrrolidone-EG-Li⁺ hydrogels (CEH) with an ultra-low-temperature freezing resistance below -70 °C were fabricated. The introduction of electrolyte ions and small-molecule polyol also made these hydrogels highly conductive (0.8 S m^-1) and imparted antidrying property to them, showing stable and reversible sensitivity to finger-wrist bending as well as 150 cycles of stretching. Such hydrogels also presented highly efficient self-healing ability, with a stress-strain healing efficiency of over 90%. Furthermore, the CEH-based sensors maintained a stable sensing performance over a wide range of temperatures below the freezing point (from -10 to -70 °C) and exhibited stable sensitivity to temperatures with fast response and no significant hysteresis. The present work is expected to provide a simple and sustainable route for the preparation of multifunctional antifreezing conductive hydrogels based on CA, leading to a wide range of potential applications in soft sensor devices.

Stimuli-Responsive Electrochemical Energy Storage Devices

Electrochemical energy storage (EES) devices have been swiftly developed in recent years. Stimuli-responsive EES devices that respond to different external stimuli are considered the most advanced EES devices. The stimuli-responsive EES devices enhanced the performance and applications of the EES devices. The capability of the EES devices to respond to the various external stimuli due to produced advanced EES devices that distinguished the best performance and interactions in different situations. The stimuli-responsive EES devices have responsive behavior to different external stimuli including chemical compounds, electricity, photons, mechanical tensions, and temperature. All of these advanced responsiveness behaviors have originated from the functionality and specific structure of the EES devices. The multi-responsive EES devices have been recognized as the next generation of stimuli-responsive EES devices. There are two main steps in developing stimuli-responsive EES devices in the future. The first step is the combination of the economical, environmental, electrochemical, and multi-responsiveness priorities in an EES device. The second step is obtaining some advanced properties such as biocompatibility, flexibility, stretchability, transparency, and wearability in novel stimuli-responsive EES devices. Future studies on stimuli-responsive EES devices will be allocated to merging these significant two steps to improve the performance of the stimuli-responsive EES devices to challenge complicated situations.

Plant-inspired conductive adhesive organohydrogel with extreme environmental tolerance as a wearable dressing for multifunctional sensors

Conductive hydrogels have attracted significant attention as a promising material in electrical and biomedical fields. However, the simultaneous realization of good conductivity, toughness, high tissue adhesiveness, excellent biocompatibility, and extreme environmental tolerance remains a challenge. Inspired by the antifreezing/antiheating behavior of natural plants, a calcium chloride/TEMPO-oxidized cellulose nanofiber-dopamine/ polyacrylamide (CaCl₂/TOCNF-DOPA/PAM) glycerol/water organohydrogel with antifreezing and antiheating properties, good transparency, conductivity, stability, excellent biocompatibility, mechanical properties, and tissue adhesiveness was fabricated. The organohydrogel has about 700% stretchability, with about 90% transparency. The organohydrogel exhibits good conductivity of 4.9 × 10^-4 S/cm and high tissue adhesiveness of 50 kPa, which can monitor various human activities. The organohydrogel displays excellent extreme environmental tolerance to maintain the conductivity and mechanical properties under an extremely wide temperature range (-24 to 50 °C) for a long period due to its water-locking effect between glycerol and water molecules. The biocompatible organohydrogel is able to protect the skin from frostbite or burns in harsh environments. The plant-inspired stable and durable organohydrogel is used as a wearable dressing for multifunctional sensors.

Strong, tough, ionic conductive, and freezing-tolerant all-natural hydrogel enabled by cellulose-bentonite coordination interactions

Ionic conductive hydrogels prepared from naturally abundant cellulose are ideal candidates for constructing flexible electronics from the perspective of commercialization and environmental sustainability. However, cellulosic hydrogels featuring both high mechanical strength and ionic conductivity remain extremely challenging to achieve because the ionic charge carriers tend to destroy the hydrogen-bonding network among cellulose. Here we propose a supramolecular engineering strategy to boost the mechanical performance and ionic conductivity of cellulosic hydrogels by incorporating bentonite (BT) via the strong cellulose-BT coordination interaction and the ion regulation capability of the nanoconfined cellulose-BT intercalated nanostructure. A strong (compressive strength up to 3.2 MPa), tough (fracture energy up to 0.45 MJ m⁻³), yet highly ionic conductive and freezing tolerant (high ionic conductivities of 89.9 and 25.8 mS cm⁻¹ at 25 and −20 °C, respectively) all-natural cellulose-BT hydrogel is successfully realized. These findings open up new perspectives for the design of cellulosic hydrogels and beyond.

Cellulose based ion conductive hydrogels are emerging materials for application in flexible electronics but achieving simultaneously high conductivity and good mechanical properties remains challenging. Here, the authors propose a supramolecular engineering strategy to strengthen cellulosic hydrogel and to improve simultaneously its ionic conductivity and freezing tolerance.

Advances in Cellulose-Based Hydrogels for Biomedical Engineering: A Review Summary

In recent years, hydrogel-based research in biomedical engineering has attracted more attention. Cellulose-based hydrogels have become a research hotspot in the field of functional materials because of their outstanding characteristics such as excellent flexibility, stimulus-response, biocompatibility, and degradability. In addition, cellulose-based hydrogel materials exhibit excellent mechanical properties and designable functions through different preparation methods and structure designs, demonstrating huge development potential. In this review, we have systematically summarized sources and types of cellulose and the formation mechanism of the hydrogel. We have reviewed and discussed the recent progress in the development of cellulose-based hydrogels and introduced their applications such as ionic conduction, thermal insulation, and drug delivery. Also, we analyzed and highlighted the trends and opportunities for the further development of cellulose-based hydrogels as emerging materials in the future.

Fabrication of lignin-containing cellulose bio-composite based on unbleached corncob and wheat straw pulp

In contemporary life, plastic, a kind of petroleum carbon source, has been produced and used in varieties of applications. However, the vast consumption of petroleum-based plastic and the burning of agricultural wastes make the environmental problems increasingly severe. Furthermore, a large number of lignocellulosic resources (such as corncob and wheat straw) are often wasted and burned, which will aggravate the environmental damage. In this paper, we use unbleached corncob and wheat straw pulp to fabricate the lignin-containing cellulose bio-composites (LCBs) to reduce non-renewable energy consumption and utilize agricultural wastes. The LCBs were obtained by a direct manufacturing process in benzyltrimethyl ammonium hydroxide (BzMe₃NOH) aqueous solution under mild conditions, constituting an entwined composite structure of cellulose micro/nano-fibers. This unique micro/nano-structure provides bio-composites with the outstanding mechanical performance of 96.7 MPa and a high haze of 90.1%. Meanwhile, with the inherent lignin, the LCBs could filter over 81.8% UV-C. As the raw material used is pure natural lignocellulose, the bio-composites prepared have innate environmental friendliness. With exceptional mechanical strength, UV-shielding property, and innate environmental friendliness, the LCBs are possible and potential substitutes for traditional petroleum-based plastic that is easily aging or non-biodegradable.

A Highly Sensitive, Ultra-Durable, Eco-Friendly Ionic Skin for Human Motion Monitoring

Ionic conductive hydrogels have shown great potential in areas such as wearable devices and electronic skins. Aiming at the sensitivity and biodegradability of the traditional flexible hydrogel electronic skin, this paper developed an ionic skin (S−iSkin) based on edible starch–sodium alginate (starch–SA), which can convert the external strain stimulus into a voltage signal without an external power supply. As an excellent ion conductive polymer, S−iSkin exhibited good stretchability, low hydrophilicity and outstanding electrochemical and sensing properties. Driven by sodium ions, the ion charge transfer resistance of S−iSkin is reduced by 4 times, the capacitance value is increased by 2 times and its conductivity is increased by 7 times. Additionally, S−iSkin has excellent sensitivity and linearity (R² = 0.998), a long service life and good biocompatibility. Under the action of micro-stress, it can produce a voltage change ratio of 2.6 times, and its sensitivity is 52.04. The service life test showed that it can work stably for 2000 s and work more than 200 stress–voltage response cycles. These findings provide a foundation for the development of health monitoring systems and micro-stress sensing devices based on renewable biomass materials.

Polyvinyl Alcohol/Graphene Oxide Conductive Hydrogels via the Synergy of Freezing and Salting Out for Strain Sensors

Hydrogels of flexibility, strength, and conductivity have demonstrated broad applications in wearable electronics and soft robotics. However, it is still a challenge to fabricate conductive hydrogels with high strength massively and economically. Herein, a simple strategy is proposed to design a strong ionically conductive hydrogel. This ion-conducting hydrogel was obtained under the synergistic action by salting out the frozen mixture of polyvinyl alcohol (PVA) and graphene oxide (GO) using a high concentration of sodium chloride solution. The developed hydrogel containing only 5 wt% PVA manifests good tensile stress (65 kPa) and elongation (180%). Meanwhile, the PVA matrix doped with a small amount of GO formed uniformly porous ion channels after salting out, endowed the PVA/GO hydrogel with excellent ionic conductivity (up to 3.38 S m⁻¹). Therefore, the fabricated PVA/GO hydrogel, anticipated for a strain sensor, exhibits good sensitivity (Gauge factor = 2.05 at 100% strain), satisfying working stability (stably cycled for 10 min), and excellent recognition ability. This facile method to prepare conductive hydrogels displays translational potential in flexible electronics for engineering applications.

Highly Conductive and Mechanically Robust Cellulose Nanocomposite Hydrogels with Antifreezing and Antidehydration Performances for Flexible Humidity Sensors

Conductive hydrogels are emerging as an appealing material platform for flexible electronic devices owing to their attractive mechanical flexibility and conductive properties. However, the conventional water-based conductive hydrogels tend to inevitably freeze at subzero temperature and suffer from continuous water evaporation under ambient conditions, leading to a decrease in their electrical conductivities and mechanical properties. Thus, it is extremely necessary, but generally challenging, to create an antifreezing and antidehydration conductive gel for maintaining high and stable performances in terms of electrical conductivity and mechanical properties. Herein, we fabricated a cellulose nanofibril (CNF)-reinforced and highly ion-conductive organogel featuring excellent antifreezing and antidehydration performances by immersing it in the CaCl₂/sorbitol solution for solvent displacement. The incorporation of a rigid CNF serving as a dynamic connected bridge provided a hierarchical honeycomb-like cellular structure for the obtained CS-nanocomposite (NC) organogel networks, facilitating significant mechanical reinforcement. The synergy effects of sorbitol and CaCl₂ allowed high-performance integration with excellent antifreezing tolerance, antidehydration ability, and ionic conductivity. Strong hydrogen bonds were formed between water molecules and sorbitol molecules to impede the formation of ice crystals and water evaporation, thereby imparting the CS-NC organogels with extreme-temperature tolerance as low as -50 °C and pre-eminent antidehydration performance with over 90% weight retention. Furthermore, this CS-NC organogel exhibited high humidity sensitivity in a wide humidity detection range (23∼97% relative humidity) because of the ready formation of hydrogen bonds between water molecules and numerous hydrophilic groups in the binary solvent and elaborated polymer chains, which can be assembled as a stretchable humidity sensor to monitor human respiration with a fast response. This work provides a new prospect for fabricating intrinsically stretchable and high-performance humidity sensors using cellulose-based humidity-responsive materials for the emerging wearable applications.

Adhesive, Antibacterial, Conductive, Anti-UV, Self-Healing, and Tough Collagen-Based Hydrogels from a Pyrogallol-Ag Self-Catalysis System

Recently, versatile hydrogels with multifunctionality have been widely developed with emerging applications as wearable and implantable devices. In this work, we reported novel versatile hydrogels by self-catalyzing the gelation of an interpenetrating polymer network consisting of acrylic acid (AA) monomers and GA-modified collagen (GCOL) in situ decorated silver nanoparticles (AgNPs). The resultant hydrogel, namely AgNP@GCOL/PAA, has many desirable features, including good mechanical properties (such as 123 kPa, 916%, and 1961 J m^-2 for the fracture stress, strain and tearing energy) that match with those of animal skin, excellent self-healing performance, favorable conductivity and strain sensitivity as a flexible biosensor, and excellent antibacterial and anti-UV properties, as well as the strong adhesiveness on skin. Moreover, AgNP@GCOL/PAA showed excellent biocompatibility via in vitro cell culture. Remarkably, AgNP@GCOL/PAA displayed superior hemostatic properties with sharply decreasing blood loss for a mouse liver incision, closely related to its strong self-adhesion which produced anchoring strength to the bleeding site and thus formed a network barrier with liver tissue. This study provides new opportunities for the facile preparation of widely used multifunctional collagen-based hydrogels based on a simple pyrogallol-Ag system.

Cellulosic-Based Conductive Hydrogels for Electro-Active Tissues: A Review Summary

The use of hydrogel in tissue engineering is not entirely new. In the last six decades, researchers have used hydrogel to develop artificial organs and tissue for the diagnosis of real-life problems and research purposes. Trial and error dominated the first forty years of tissue generation. Nowadays, biomaterials research is constantly progressing in the direction of new materials with expanded capabilities to better meet the current needs. Knowing the biological phenomenon at the interaction among materials and the human body has promoted the development of smart bio-inert and bio-active polymeric materials or devices as a result of vigorous and consistent research. Hydrogels can be tailored to contain properties such as softness, porosity, adequate strength, biodegradability, and a suitable surface for adhesion; they are ideal for use as a scaffold to provide support for cellular attachment and control tissue shapes. Perhaps electrical conductivity in hydrogel polymers promotes the interaction of electrical signals among artificial neurons and simulates the physiological microenvironment of electro-active tissues. This paper presents a review of the current state-of-the-art related to the complete process of conductive hydrogel manufacturing for tissue engineering from cellulosic materials. The essential properties required by hydrogel for electro-active-tissue regeneration are explored after a short overview of hydrogel classification and manufacturing methods. To prepare hydrogel from cellulose, the base material, cellulose, is first synthesized from plant fibers or generated from bacteria, fungi, or animals. The natural chemistry of cellulose and its derivatives in the fabrication of hydrogels is briefly discussed. Thereafter, the current scenario and latest developments of cellulose-based conductive hydrogels for tissue engineering are reviewed with an illustration from the literature. Finally, the pro and cons of conductive hydrogels for tissue engineering are indicated.

Nanocellulose-enhanced organohydrogel with high-strength, conductivity, and anti-freezing properties for wearable strain sensors

The use of ion-conductive hydrogels in strain sensors with high mechanical properties, conductivity, and anti-freezing properties is challenging. Here, high-strength, transparent, conductive, and anti-freezing organohydrogels were fabricated through the radical polymerization of polyacrylamide (PAM)/sodium alginate (SA)/TEMPO-oxidized cellulose nanofibrils (TOCNs) in a dimethyl sulfoxide (DMSO)/water solution, followed by soaking in a CaCl₂ solution. The resulting organohydrogels demonstrated a high strength (tensile strength of 1.04 MPa), stretchability (681%), transparency (>84% transmittance), and ionic conductivity (1.25 S m^-1). The organohydrogel-based strain sensor showed a high strain sensitivity (GF = 2.1). In addition, due to a synergistic effect between the DMSO/H₂O binary solvent and CaCl₂, the organohydrogel remained flexible (could bend 180°) and conductive (1.01 S m^-1) at -20 °C. Interestingly, the TOCNs exerted a reinforcing effect on both the mechanical properties and ionic conductivity. This research provides a novel strategy to prepare ion-conductive organohydrogels with good mechanical properties, conductivity, and anti-freezing properties for use as flexible electronic materials.

Oxidized alginate linked tough conjoined-network hydrogel with self-healing and conductive properties for strain sensing

In this article, we prepared a conjoined-network hydrogel with acrylamide-modified chitosan, oxidized alginate and polyacrylamide. The oxidized alginate can not only crosslink with chitosan to form a hydrogel network but...

Flexible, anti-freezing self-charging power system composed of cellulose based supercapacitor and triboelectric nanogenerator

A self-charging power system composed of cellulose organohydrogel based supercapacitor and triboelectric nanogenerator is constructed in the present work. Cellulose organohydrogels with flexibility, optical transparency, conductivity and excellent low temperature tolerance are fabricated via a dissolution and regeneration process. The optical transmittance, elongation at break, and conductivity of the cellulose organohydrogel reach 93%, 242%, and 1.92 S/m, as well as excellent anti-freezing property down to -54.3 °C, potential as flexible conductive device in harsh conditions. When demonstrated as energy storage device, the cellulose organohydrogel based supercapacitor demonstrates excellent supercapacitor performances, durability against deformation and resistance to low temperature. When demonstrated as energy harvesting device, the cellulose organohydrogel based triboelectric nanogenerator displays stability, and resistance to both low temperature and a large number of operation cycles. As the cellulose based triboelectric nanogenerator is integrated with cellulose based supercapacitor, a flexible and anti-freezing self-charging power system is built, capable of driving miniaturized electronics, demonstrating great potential as wearable power system in harsh conditions.

Anti-freezing starch hydrogels with superior mechanical properties and water retention ability for 3D printing

As a novel material that can be used at subzero temperatures, anti-freezing hydrogels have been attracting extensive attention. Inspired by the freeze-tolerance phenomenon in seawater, which is achieved by mixing salts into water, an ionic compound (CaCl₂) was used to gelatinize starch to form anti-freezing hydrogels. Native potato starch (NPS) anti-freezing hydrogels were formed at -10 °C, -18 °C, -30 °C, and - 50 °C with 6-9 kPa tensile strength and 100-230% elongation at break. The compressive stress of anti-freezing hydrogels at different environmental temperatures increased from 18.586 kPa to 36.551 kPa with the glass transform temperature of starch hydrogels dropped to -50 °C. The anti-freezing hydrogels showed excellent water retention ability, which could maintain a water content of 55% after 7 days at ambient temperature. The prototyping of anti-freezing starch hydrogels broadens the applications of starch in food, adhesives, medical materials, and intelligent materials.

A multifunctional green antibacterial rapid hemostasis composite wound dressing for wound healing

Rapid hemostasis and antibacterial properties are essential for novel wound dressings to promote wound healing. In particular, timely and rapid hemostasis could be of benefit to reduce the mortality caused by excessive bleeding loss. Herein, we present a novel strategy of combining electrospinning technology with post-modification technology to prepare a multifunctional wound dressing, cellulose diacetate-based composite wound dressing (CDCE), with rapid hemostasis and antibacterial activity. It is interesting that the CDCE wound dressing had superhydrophilicity, high water absorption, and strong absorbing capacity, which could eliminate the exudate around the wound in a timely manner and further promote rapid hemostasis. Additionally, its excellent antibacterial properties could inhibit severe infection in the wound and accelerate wound healing. Based on these advantages, the novel CDCE wound dressing could promote wound contraction and further accelerate wound healing compared with the common traditional wound dressing gauze. Taken together, the multifunctional CDCE wound dressing has high potential for clinical application in the future.

A General Crosslinker Strategy to Realize Intrinsic Frozen Resistance of Hydrogels

Development and understanding of antifreezing materials are fundamentally and practically important for materials design and delivery. However, almost all of antifreezing materials are either organic/icephobic materials containing no water or hydrophilic hydrogels containing antifreezing additives. Here, a general crosslinking strategy to fabricate a family of EGINA-crosslinked double-network hydrogels with intrinsic, built-in antifreezing and mechanical properties, but without any antifreezing additives is proposed and demonstrated. The resultant hydrogels, despite large structural and compositional variations of hydrophilies, electrolytes, zwitterions, and macromolecules of polymer chains, achieved strong antifreezing and mechanical properties in different environments including solution state, gel state, and hydrogel/solid interfaces. Such general antifreezing property of EGINA-crosslinked hydrogels, regardless network compositions, is likely stemmed from their highly hydrophilic and tightly crosslinked DN structures for inducing strong water-network bindings to prevent ice crystal formation from free waters in hydrogel networks. EGINA-crosslinked hydrogels can also serve as a key component to be fabricated into smart windows with high optical transmittance and supercapacitors with excellent electrochemical stability at subzero temperatures. This work provides a simple, blueprint antifreezing design concept and a family of antifreezing hydrogels for the better understanding of the composite-structure-property relationship of antifreezing materials and the fundamentals of confined water in wet soft materials.

Ultra-Sensitive and Ultra-Stretchable Strain Sensors Based on Emulsion Gels with Broad Operating Temperature

Hydrogels with mechanical elasticity and conductivity are ideal materials in wearable devices. However, traditional hydrogels are fragile upon mechanical loading and lose functions in climate change because the internal water undergoes freeze and dehydration. Herein, we synthesize stable emulsions at high and low temperatures by introducing glycerol into the W/W emulsions. Then the high-stable emulsions are used as templates to produce the freestanding emulsion gels with enhanced mechanical strength and conductivity. The introduction of glycerol endows emulsions and emulsion gels with high and low temperature resistance (-20 to 90 °C). The fabricated strain sensors based on emulsion gels show high sensitivity (gauge factor=6.240), high stretchability (1081 %), fatigue resistance, self-healing and adhesion properties, realizing the repeatable and accurate detection of various human motions. These high-performance and eco-friendly emulsion gels can be promising candidates for next-generation artificial skin and human-machine interface.

Transparent, conductive cellulose hydrogel for flexible sensor and triboelectric nanogenerator at subzero temperature

Herein, flexible, transparent and conductive cellulose hydrogels were directly fabricated by regenerating the chemically cross-linked cellulose in NaCl aqueous solution, without further treatment. NaCl played a dominant role on the mechanical, optical, conductive and anti-freezing properties of cellulose hydrogel, also endowed the hydrogel with safety. After optimization, the transparency, tensile strength, elongation at break and conductivity of the cellulose hydrogel reached 94 % at 550 nm, 5.2 MPa, 235 %, and 4.03 S/m, respectively, as well as low temperature tolerance down to -33.5 ℃. Furthermore, sensors based on cellulose hydrogel demonstrated fast response and stable sensitivity to tensile strain, compressive pressure, and temperature, at both room and subzero temperature, without obvious hysteresis. The cellulose hydrogel based triboelectric nanogenerator demonstrated stability and durability as energy harvester in harsh conditions. In addition, the established approach can be used to prepare flexible, transparent and conductive cellulose hydrogel with various salts, indicating universality, simplicity and sustainability for the fabrication of cellulose based flexible conductive devices.

Polyacrylamide/Chitosan-Based Conductive Double Network Hydrogels with Outstanding Electrical and Mechanical Performance at Low Temperatures

Hydrogel-based electronics have received growing attention because of their great flexibility and stretchability. However, the fabrication of conductive hydrogels with high stretchability, excellent toughness, outstanding sensitivity, and low-temperature stability still remains a great challenge. In this study, a type of conductive hydrogels consisting of a double network (DN) structure is synthesized. The dynamically cross-linked chitosan (CS) and the flexible polyacrylamide network doped with polyaniline constitute the DN through the hydrogen bonds between the hydroxyl, amide, and aniline groups. This type of hydrogels displays excellent mechanical performance, striking conductivity, and remarkable freezing tolerance. The flexible electronic sensors based on the double-network hydrogels demonstrate superior strain sensitivity and linear response on various deformations. Additionally, the good antifreezing property of the hydrogels allows the sensors to exhibit excellent performance at -20 °C.

Highly Sensitive On-Skin Temperature Sensors Based on Biocompatible Hydrogels with Thermoresponsive Transparency and Resistivity

The development of electrically responsive sensors that interact directly with human skin and at the same time produce a visual indication of the temperature is in great demand. Here, we report a highly sensitive electronic skin (E-skin) sensor that measures and visualizes skin temperature simultaneously using a biocompatible hydrogel displaying thermoresponsive transparency and resistivity resulting from a temperature dependence of the strength of the hydrogen bonding between its components. This thermoresponsive hydrogel (TRH) showed a temperature dependence of not only the proton conductivity but also of its transmittance of light through a change in polymer conformation. We were able to use our TRH temperature sensor (TRH-TS) to measure temperature in a wide range of temperatures based on a change in its intrinsic resistivity (-0.0289 °C^-1 ) and to visualize the temperature due to its thermoresponsive transmittance (from 7% to 96%). The TRH-TS exhibited high reliability upon multiple cycles of heating and cooling. The on-skin TRH-TS patch is also shown to successfully produce changes in its impedance and optical transparency as a result of changes in skin temperature during cardiovascular exercise. This work has shown that our biocompatible TRH-TS is potentially suitable as wearable E-skin for various emerging flexible healthcare monitoring applications.

Wood-Derived Functional Polymeric Materials

In recent years, tremendous efforts have been dedicated to developing wood-derived functional polymeric materials due to their distinctive properties, including environmental friendliness, renewability, and biodegradability. Thus, the uniqueness of the main components in wood (cellulose and lignin) has attracted enormous interest for both fundamental research and practical applications. Herein, the emerging field of wood-derived functional polymeric materials fabricated by means of macromolecular engineering is reviewed, covering the basic structures and properties of the main components, the design principle to utilize these main components, and the resulting wood-derived functional polymeric materials in terms of elastomers, hydrogels, aerogels, and nanoparticles. In detail, the natural features of wood components and their significant roles in the fabrication of materials are emphasized. Furthermore, the utilization of controlled/living polymerization, click chemistry, dynamic bonds chemistry, etc., for the modification is specifically discussed from the perspective of molecular design, together with their sequential assembly into different morphologies. The functionalities of wood-derived polymeric materials are mainly focused on self-healing and shape-memory abilities, adsorption, conduction, etc. Finally, the main challenges of wood-derived functional polymeric materials fabricated by macromolecular engineering are presented, as well as the potential solutions or directions to develop green and scalable wood-derived functional polymeric materials.

Recent Progress in High-Strength and Robust Regenerated Cellulose Materials

High-strength petroleum-based materials like plastics have been widely used in various fields, but their nonbiodegradability has caused serious pollution problems. Cellulose, as the most abundant sustainable polymer, has a great chance to act as the ideal substitute for plastics due to its low cost, wide availability, biodegradability, etc. Herein, the recent achievements for developing cellulose "green" solvents and regenerated cellulose materials with high strength via the "bottom-up" route are presented. Cellulose can be regenerated to produce films/membranes, hydrogels/aerogels, filaments/fibers, microspheres/beads, bioplastics, etc., which show potential applications in textiles, biomedicine, energy storage, packaging, etc. Importantly, these cellulose-based materials can be biodegraded in soil and oceans, reducing environmental pollution. The cellulose solvents, dissolving mechanism, and strategies for constructing the regenerated cellulose functional materials with high strength and performances, together with the current achievements and urgent challenges are summarized, and some perspectives are also proposed. The near future will be an exciting era for high-strength biodegradable and renewable materials. The hope is that many environmentally friendly materials with good properties and low cost will be produced for commercial use, which will be beneficial for sustainable development in the world.

A Smart Patch with On-Demand Detachable Adhesion for Bioelectronics

A smart ionic skin patch with on-demand detachable adhesion has been developed as human-machine interface for physiological signal monitoring. In spite of the multifunctions demonstrated by existing ionic skin, it is still difficult to distinguish different signals simultaneously. Moreover, the secondary damages to the tissues are often overlooked when the adhesive materials are removing from the wound. Herein, a multifunctional biomimetic hydrogel with temperature, mechanical, electrical, and pH response is developed. This hydrogel is designed by in situ polymerizing of hydrophilic anion monomers in a natural cationic polysaccharide to construct multifunctional biomimetic ionic channel. Due to the reversible physical cross-linked network and thermosensitivity, the mechanical properties, adhesion, and visual effect of the hydrogel can be tuned by changing hydrogen bonding density via phase transition, thus making it an excellent biosafe material for wearable device. The hydrogel is utilized as skin patch intended for monitoring physiological signals stimulated by physical and chemical changes involving pressure, temperature, pH value, and electrocardiograph. Especially, this ionic skin patch can recognize temperature change signals precisely either in broad or extremely narrow temperature range. This smart skin patch can even recognize the pressure and temperature signals in real time and differentiate the signals simultaneously.

Poly(vinyl alcohol) Hydrogels with Integrated Toughness, Conductivity, and Freezing Tolerance Based on Ionic Liquid/Water Binary Solvent Systems

In recent years, ionic conductive hydrogels have shown great potential for application in flexible sensors, energy storage devices, and actuators. However, developing facile and effective methods for fabricating such hydrogels remains a great challenge, especially for hydrogels that retain their properties in extreme environmental conditions, such as at subzero temperatures or storage in open-air conditions. Herein, a water-miscible ionic liquid (IL), such as 1-ethyl-3-methylimidazolium acetate (EMImAc), was introduced to form an IL/water binary solvent system for poly(vinyl alcohol) (PVA) to create ionic conductive PVA hydrogels. The physically crosslinked PVA/EMImAc/H₂O hydrogels showed better mechanical properties and transparency than the traditional PVA hydrogel prepared by the freeze-thaw method due to the formation of homogeneous and small PVA microcrystals in the EMImAc/H₂O binary solvent system. More importantly, the PVA/EMImAc/H₂O hydrogel exhibited significant anti-freezing and water-retaining properties because of the presence of the IL. The hydrogels remained flexible and conductive at temperatures as low as -50 °C and retained more than 90% of their weight after storage in open-air conditions for 2 weeks. In addition, the thermal stability of the hydrogel could be increased to 95 °C through the addition of Mg(II) ions. A multimodal sensor based on the PVA/EMImAc/H₂O/Mg(II) hydrogel showed high sensitivity and a quick response to changes in pressure, strain, and temperature, with both long-term stability and a wide working temperature range. This study may open a new route for the fabrication of functional PVA-based hydrogel electrolytes and provide a practical pathway for their use in multifunctional electronic and sensory device applications.