Amorphous Mo-Ta Oxide Nanotubes for Long-Term Stable Mo Oxide-Based Supercapacitors

Optimization of Electrode Materials Using Nanocarboxylic Polystyrene Promotes Accumulation for Chromium in Zea mays from Water and Soil Contamination

Chromium is a multivalent metal with great development in the energy storage field because it can effectively improve the electrochemical performance of the material. However, chromium(VI) is soluble in water and toxic, which causes serious metal pollution in the environment. In addition, nanoplastics are difficult to degrade and easy to accumulate, which is an urgent environmental problem to be solved. Therefore, we choose Zea mays to absorb chromium ions, nanopolystyrene, nanocarboxylic polystyrene, and their complexes, which can coordinate and decompose with various polymers in Z. mays, and produce coordination, conjugation, mixed valence, and adjacent group effects. Due to the above effects, the UV-vis spectrum of the material is blueshifted; the X-ray photoelectron spectroscopy peaks of Cr 2p have a chemical shift; the pore structure is optimized; the graphitization degree is improved; the content of N, O, and Cr in the material increases; and the elements are evenly distributed. The series of optimization processes makes the electrodes exhibit excellent electrochemical performance in both supercapacitors and lithium-ion batteries. At 0.5 A·g-1, the specific capacitance of the electrode reaches 490 F·g-1. After 10,000 cycles, its specific capacitance remains at 429.3 F·g-1, and the Coulombic efficiency is 89.9%. In lithium-ion batteries, the initial discharging capacity of the electrode is 1071.7 mAh·g-1 at 0.05 A·g-1. After 5000 cycles, its specific capacity can still reach 242 mAh·g-1 at 0.2 A·g-1, and the Coulombic efficiency is above 95%.

Recent Progress of Self-Supported Metal Oxide Nano-Porous Arrays in Energy Storage Applications

The demand for high-performance and cost-effective energy storage solutions for mobile electronic devices and electric vehicles has been a driving force for technological advancements. Among the various options available, transitional metal oxides (TMOs) have emerged as a promising candidates due to their exceptional energy storage capabilities and affordability. In particular, TMO nanoporous arrays fabricated by electrochemical anodization technique demonstrate unrivaled advantages including large specific surface area, short ion transport paths, hollow structures that reduce bulk expansion of materials, and so on, which have garnered significant research attention in recent decades. However, there is a lack of comprehensive reviews that discuss the progress of anodized TMO nanoporous arrays and their applications in energy storage. Therefore, this review aims to provide a systematic detailed overview of recent advancements in understanding the ion storage mechanisms and behavior of self-organized anodic TMO nanoporous arrays in various energy storage devices, including alkali metal ion batteries, Mg/Al-ion batteries, Li/Na metal batteries, and supercapacitors. This review also explores modification strategies, redox mechanisms, and outlines future prospects for TMO nanoporous arrays in energy storage.

Mixed-valence molybdenum oxide as a recyclable sorbent for silver removal and recovery from wastewater

Silver ions in wastewater streams are a major pollutant and a threat to human health. Given the increasing demand and relative scarcity of silver, these streams could be a lucrative source to extract metallic silver. Wastewater is a complex mixture of many different metal salts, and developing recyclable sorbents with high specificity towards silver ions remains a major challenge. Here we report that molybdenum oxide (MoO_x) adsorbent with mixed-valence (Mo(V) and Mo(VI)) demonstrates high selectivity (distribution coefficient of 6437.40 mL g^-1) for Ag⁺ and an uptake capacity of 2605.91 mg g^-1. Our experimental results and density functional theory calculations illustrate the mechanism behind Ag⁺ adsorption and reduction. Our results show that Mo(V) species reduce Ag⁺ to metallic Ag, which decreases the energy barrier for subsequent Ag⁺ reductions, accounting for the high uptake of Ag⁺ from wastewater. Due to its high selectivity, MoO_x favorably adsorbs Ag⁺ even in the presence of interfering ions. High selective recovery of Ag⁺ from wastewater (recovery efficiency = 97.9%) further supports the practical applications of the sorbent. Finally, MoO_x can be recycled following silver recovery while maintaining a recovery efficiency of 97.1% after five cycles. The method is expected to provide a viable strategy to recover silver from wastewater.

An Amorphous-Crystalline Nanosheet Arrays Structure for Ultrahigh Electrochemical Performance Supercapattery

Hybrid supercapacitors (HSCs), also called supercapattery, which can substitute for low power density batteries have attracted extensive interest. However, when HSCs comes to commercial applications, there is still space for improvement in energy density. It seems that designing of electrode with high capacity is an effective measure. Herein, amorphous-crystalline MoO₃ -Ni₃ S₂ /NF-0.5 nanosheet arrays are developed as battery-type electrodes. Specifically, the sheet-like structure of crystalline Ni₃ S₂ can achieve rich structural nanocrystallization, improving the redox reaction efficiency. Meanwhile, the disordered structure and irregular surface of the amorphous MoO₃ are conducive to maximize the contact between the electrode and electrolyte, slowing down the volume change caused by the continuous charge-discharge process. As a result, it displays an ultrahigh areal specific capacity of 8.52 C cm^-2 at 5 mA cm^-2 , and superior lifespan up to 7500 cycles with 90.0% retention. Further, when assembled into HSCs, the specific capacity reaches 1.47 C cm^-2 , corresponding to an energy density of 4.18 mWh cm^-2 at a power density of 0.34 mW cm^-2 . Totally, the design of the unique structure displays a valuable measure for rational development of high energy density hybrid energy storage devices that are not limited to supercapacitors.

A long-term stable aqueous aluminum battery electrode based on one-dimensional molybdenum-tantalum oxide nanotube arrays

Aluminum ion aqueous batteries (AIBs) are among the most promising candidates for high energy density devices due to the multivalent redox processes associated with Al³⁺ ion intercalation. However, only a few stable AIB electrode materials have been reported so far. MoO₃ is a very promising electrode material due to its octahedral layered crystal structure which can accommodate multivalent cation by intercalation. However, the poor electrochemical stability of MoO₃ and the sluggish intercalation kinetics of Al³⁺ ion in Mo oxides electrodes limit its practical application. In this work, we propose a strategy to overcome such shortcomings of MoO₃ by fabricating electrodes composed of self-ordered one-dimensional (1D) MoTaO_x nanotubes synthesized via electrochemical anodization of Mo-Ta alloy substrates. We show that this approach allows for direct incorporation of Ta in the Mo oxide nanotubes. The resulting MoTaO_x nanotubes, composed of octahedral MoO₃ and rhombohedral Mo₂Ta₂O₁₁ phases, exhibit remarkable electrochemical stability and Al-ion storage properties in aqueous electrolytes that are superior to that of pristine Mo oxide or other most efficient electrode materials reported to date. Such MoTaO_x nanotube-based electrodes can achieve a specific capacity of 1180 mA h cm^-3 (337 mA h g^-1, 141 μA h cm^-2) at 1.25 A cm^-3 (∼0.35 A g^-1, 0.15 mA cm^-2). More importantly, the capacity retention of such nanotube array electrodes remains above 83% of the initial capacity after 3000 cycles.

The Use of Anodic Oxides in Practical and Sustainable Devices for Energy Conversion and Storage

This review addresses the main contributions of anodic oxide films synthesized and designed to overcome the current limitations of practical applications in energy conversion and storage devices. We present some strategies adopted to improve the efficiency, stability, and overall performance of these sustainable technologies operating via photo, photoelectrochemical, and electrochemical processes. The facile and scalable synthesis with strict control of the properties combined with the low-cost, high surface area, chemical stability, and unidirectional orientation of these nanostructures make the anodized oxides attractive for these applications. Assuming different functionalities, TiO2-NT is the widely explored anodic oxide in dye-sensitized solar cells, PEC water-splitting systems, fuel cells, supercapacitors, and batteries. However, other nanostructured anodic films based on WO3, CuxO, ZnO, NiO, SnO, Fe2O3, ZrO2, Nb2O5, and Ta2O5 are also explored and act as the respective active layers in several devices. The use of AAO as a structural material to guide the synthesis is also reported. Although in the development stage, the proof-of-concept of these devices demonstrates the feasibility of using the anodic oxide as a component and opens up new perspectives for the industrial and commercial utilization of these technologies.