Integrated Design of Hierarchical CoSnO3@NC@MnO@NC Nanobox as Anode Material for Enhanced Lithium Storage Performance

Synergistic effect between ZnCo2O4 and Co3O4 induces superior electrochemical performance as anodes for lithium-ion batteries

The current work describes a facile synthesis of spinel-type ZnCo2O4 along with an additional phase, Co3O4, by simply maintaining a non-stoichiometric ratio of Zn and Co precursors. Pure ZnCo2O4 and Co3O4 were also synthesized using the same method to compare results. The obtained morphologies of samples show that small-sized nanoparticles are interconnected and form a porous nanosheet-like structure. When used as anode materials for Li-ion batteries, the ZnCo2O4/Co3O4 nanocomposite electrode exhibits a highly stable charge capacity of 1146.2 mA h g-1 at 0.5C after 350 cycles, which is superior to those of other two pure electrodes, which can be attributed to its optimum porosity, synergistic effect of ZnCo2O4 and Co3O4, increased active sites for Li+ ion diffusion, and higher electrical conductivity. Although the pure Co3O4 electrode displayed a much higher rate capability than the ZnCo2O4/Co3O4 nanocomposite electrode at all investigated current rates, the Co3O4 morphology apparently could not withstand long-term cycling, and the electrode became pulverized due to the repeated volume expansion/contraction, resulting in a rapid decrease in the capacity.

Stannate-Based Materials as Anodes in Lithium-Ion and Sodium-Ion Batteries: A Review

Binary metal oxide stannate (M₂SnO₄; M = Zn, Mn, Co, etc.) structures, with their high theoretical capacity, superior lithium storage mechanism and suitable operating voltage, as well as their dual suitability for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), are strong candidates for next-generation anode materials. However, the capacity deterioration caused by the severe volume expansion problem during the insertion/extraction of lithium or sodium ions during cycling of M₂SnO₄-based anode materials is difficult to avoid, which greatly affects their practical applications. Strategies often employed by researchers to address this problem include nanosizing the material size, designing suitable structures, doping with carbon materials and heteroatoms, metal-organic framework (MOF) derivation and constructing heterostructures. In this paper, the advantages and issues of M₂SnO₄-based materials are analyzed, and the strategies to solve the issues are discussed in order to promote the theoretical work and practical application of M₂SnO₄-based anode materials.

Ga2O3 Quantum Dots with N-Doped Amorphous Carbon Fixed for Efficient Storage and Transfer of Lithium Ions by Introduction of Dopamine Hydrochloride

The Ga₂O₃ anode has great potential due to its self-healing and high theoretical capacity in lithium-ion batteries. Like anodes with other transition metal oxides, the Ga₂O₃ anode has the problems of structural change and low electrical conductivity. The electrochemical performance of the Ga₂O₃ anode still needs to be improved. In this work, we synthesized a Ga₂O₃ quantum dots@N-doped carbon (Ga₂O₃-QD@NC) composite by hydrothermal reaction with a carbon source of dopamine hydrochloride, in which Ga₂O₃ quantum dots were dispersed in the interior of the amorphous carbon. Such a special structure is conducive to the high-speed migration of lithium ions and electrons and effectively inhibits volume expansion and agglomeration. Smaller and more uniform quantum dots facilitate efficient repair of the structure. Due to these advantages, the Ga₂O₃-QD@NC electrode has great electrochemical performance. The Ga₂O₃-QD@NC electrode has an initial discharge capacity of 1580 mAh g^-1 with a high first Coulombic efficiency of 62.8% and a cycling capacity of 953 mAh g^-1 under 0.1 A g^-1. It even has a capacity of 460 mAh g^-1 at 1 A g^-1 after 300 cycles. This strategy can provide a new direction for the Ga₂O₃ anode in lithium-ion batteries with high capacity.

Regulating the Electronic Configuration of Spinel Zinc Manganate Derived from Metal-Organic Frameworks: Controlled Synthesis and Application in Anode Materials for Lithium-Ion Batteries

In recent years, transition metal oxides have been considered as the most promising anode materials due to their high theoretical capacity, low price, and abundant natural reserves. Among them, zinc manganate is used as an electrode material for anodes, whose application is mostly hindered due to its poor ionic/electronic conductivity. In this work, a series of ZnMn₂O₄ (ZMO) are synthesized by a hydrothermal technique coordinated with a metal-organic framework-based high-temperature calcination process for their application as an anode in lithium-ion batteries (LIBs). Meanwhile, this study systematically explores the influence of carbon doping and the types of organic ligands and oxygen vacancies on the electrochemical properties of the synthesized ZMO. Density functional theory (DFT) calculations and experimental investigations reveal that the introduction of carbon and oxygen vacancies can enhance electronic conductivity, more active sites and faster Li⁺ adsorption, resulting in better electrochemical performances. As expected, all ZMOs with carbon doping (PMA-ZMO, MI-ZMO, and BDC-ZMO) derived from 1,2,4,5-benzenetetracarboxylic acid, 2-methylimidazole, and 1,4-dicarboxybenzene achieve outstanding electrochemical performance. Meanwhile, the introduction of oxygen vacancies can enhance the electronic conductivity and can significantly reduce the activation energy of Li⁺ transport, thereby accelerating the Li⁺ diffusion kinetics in the lithiation/delithiation process. Furthermore, an optimal ZMO anode material synthesized by 2-methylimidazole delivers a high reversible capacity of 1174.7 mA h g^-1 after 300 cycles at 0.1 A g^-1 and 600 mA h g^-1 at 0.5 A g^-1 after 300 cycles. After high-rate charge and discharge cycles, the specific capacity rapidly recovers to a value greater than the initial value, which proves the unusual activation and thereby an excellent rate property of the electrode. Hence, we conclude that ZMO provides potential application prospects as an anode electrode material for LIBs.

Fabrication of MnSe/SnSe@C heterostructures for high-performance Li/Na storage

Novel heterostructured MnSe/SnSe@C nanoboxes display excellent electrochemical performance.

Binary-Metal Mn2SnO4 Nanoparticles and Sn Confined in a Cubic Frame with N-Doped Carbon for Enhanced Lithium and Sodium Storage

Sn-based materials have been popularly researched as anodes for energy storage due to their high theoretical capacity. However, the sluggish reaction kinetics and unsatisfied cycling stability caused by poor conductivity and dramatic volume expansion are still pivotal barriers for the development of Sn-based materials as anodes. In this work, the binary-metal Mn₂SnO₄ nanoparticles and Sn encapsulated in N-doped carbon (Sn@Mn₂SnO₄-NC) were fabricated by multistep reactions and employed as the anode for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). The coexistence of binary metals (Sn and Mn) can improve intrinsic conductivity. Simultaneously, hollow architecture along with carbon relieves internal stress and prevents structural collapse. A Sn@Mn₂SnO₄-NC anode delivers an appealing capacity of 1039.5 mAh g^-1 for 100 cycles at 100 mA g^-1 and 823.8 mAh g^-1 for 600 cycles at 1000 mA g^-1 in LIBs. When evaluated as an anode in SIBs, the Sn@Mn₂SnO₄-NC anode tolerates up to 7000 cycles at 2000 mA g^-1 and maintains a capacity of 185.8 mAh g^-1. Quantified kinetic investigations demonstrate the high contribution of pseudocapacitive effects during the cycle process. Furthermore, density functional theory (DFT) calculations further verify that introduction of the second metal (Mn) improves the conductivity of the material, which is favorable for charge transport. This work is expected to provide a feasible preparation strategy for binary-metal materials to enhance the performance of lithium- and sodium-ion batteries.

Synergistic Interactions of Different Electroactive Components for Superior Lithium Storage Performance

The fusion of different electroactive components of lithium-ion batteries (LIBs) sometimes brings exceptional electrochemical properties. We herein report the reduced graphene-oxide (rGO)-coated Zn₂SnO_4z@NiO nanofibers (ZSO@NiO@G NFs) formed by the synergistic fusion of three different electroactive components including ZnO, SnO₂, and NiO that exhibit exceptional electrochemical properties as negative electrodes for LIBs. The simple synthetic route comprised of electrospinning and calcination processes enables to form porous one-dimensional (1D) structured ZSO, which is the atomic combination between ZnO and SnO₂, exhibiting effective strain relaxation during battery operation. Furthermore, the catalytic effect of Ni converted from the surface-functional NiO nanolayer on ZSO significantly contributes to improved reversible capacity. Finally, rGO sheets formed on the surface of ZSO@NiO NFs enable to construct electrically conductive path as well as a stable SEI layer, resulting in excellent electrochemical performances. Especially, exceptional cycle lifespan of more than 1600 cycles with a high capacity (1060 mAh g^-1) at a high current density (1000 mA g^-1), which is the best result among mixed transition metal oxide (stannates, molybdates, cobaltates, ferrites, and manganates) negative electrodes for LIBs, is demonstrated.

Controlled synthesis of N-doped carbon and TiO2 double-shelled nanospheres with encapsulated multi-layered MoO3 nanosheets as an anode for reversible lithium storage

α-Phase molybdenum trioxide (α-MoO₃) is one of the promising anode materials for lithium storage due to its high theoretical capacity and unique intercalation reaction mechanism. Herein, through an efficient step-by-step solvothermal synthesis strategy, multi-layered MoO₃ nanosheets are encapsulated by nitrogen-doped carbon (NC) and ultrathin TiO₂ double-shells to obtain hierarchical core-shell nanospheres (MoO₃@TiO₂@NC). The unique nanostructure enables shortening the Li⁺ diffusion distance, buffer the volume change during the intercalation/deintercalation process, and increase the active sites for the electrochemical reaction. Based on the hierarchical nanostructure and the synergistic effect of each component, the MoO₃@TiO₂@NC electrode exhibits a high Li⁺ storage capacity around 979.6 mA h g^-1 after 200 cycles at 0.2 A g^-1, a stable cycle performance of 800.3 mA h g^-1 at 1 A g^-1 after 700 cycles and an excellent rate capability of 418.0 mA h g^-1 at 5 A g^-1. Furthermore, the MoO₃@TiO₂@NC-based coin-type full cell with a commercial LiNi_1/3Mn_1/3Co_1/3O₂ cathode exhibited a good cycling stability at 0.2 A g^-1 for 100 cycles (∼190 mA h g^-1) and rate capability (134 mA h g^-1 at 5 A g^-1).