Selective Photocatalytic CO2 Reduction in Water by Electrostatic Assembly of CdS Nanocrystals with a Dinuclear Cobalt Catalyst

Bridging molecular photosensitizer and catalyst on carbon nanotubes toward enhanced selectivity and durability for CO2 photoreduction

Homogenous molecular photocatalysts for CO2 reduction, especially metal complex-based photosensitizer‒catalyst assemblages, have been attracting extensive research interests due to their efficiency and customizability. However, their low durability and recyclability limit practical applications. In this work, we immobilized the catalysts of metal terpyridyl complexes and the photosensitizer of [Ru(bpy)3]Cl2 onto the surface of carbon nanotubes through covalent bonds and electrostatic interactions, respectively, transforming the homogeneous system into a heterogeneous one. Our characterizations prove that these metal complexes are well dispersed on CNTs with a high loading (ca. 12 wt.%). Photocatalytic measurements reveal that catalytic activity is remarkably enhanced when the molecular catalysts are anchored, which is three times higher than that of homogeneous molecular catalysts. Moreover, when the photosensitizer of [Ru(bpy)3]Cl2 is immobilized, the side reaction of hydrogen evolution is completely suppressed and the selectivity for CO production reaches 100%, with its durability also significantly improved. This work provides an effective pathway for constructing heterogeneous photocatalysts based on rational assembly of efficient molecular photosensitizers and catalysts.

Photocatalytic CO2 Reduction Using Homogeneous Carbon Dots with a Molecular Cobalt Catalyst

A simple and precious-metal free photosystem for the reduction of aqueous CO2 to syngas (CO and H2) is reported consisting of carbon dots (CDs) as the sole light harvester together with a molecular cobalt bis(terpyridine) CO2 reduction co-catalyst. This homogeneous photocatalytic system operates in the presence of a sacrificial electron donor (triethanolamine) in DMSO/H2O solution at ambient temperature. The photocatalytic system exhibits an activity of 7.7 ± 0.2 mmolsyngas gCDs -1 (3.6 ± 0.2 mmolCO gCDs -1 and 4.1 ± 0.1 mmolH2 gCDs -1) after 24 hours of full solar spectrum irradiation (AM 1.5G). Spectroscopic and electrochemical characterization supports that this photocatalytic performance is attributed to a favorable association between CDs and the molecular cobalt catalyst, which results in improved interfacial photoelectron transfer and catalytic mechanism. This work provides a scalable and inexpensive platform for the development of CO2 photoreduction systems using CDs.

The role of surface functionalization in quantum dot-based photocatalytic CO2 reduction: balancing efficiency and stability

Photocatalytic CO2 reduction offers a promising strategy to produce hydrocarbons without reliance on fossil fuels. Visible light-absorbing colloidal nanomaterials composed of earth-abundant metals suspended in aqueous media are particularly attractive owing to their low-cost, ease of separation, and highly modifiable surfaces. The current study explores such a system by employing water-soluble ZnSe quantum dots and a Co-based molecular catalyst. Water solubilization of the quantum dots is achieved with either carboxylate (3-mercaptopropionic acid) or ammonium (2-aminoethanethiol) functionalized ligands to produce nanoparticles with either negatively or positively-charged surfaces. Photocatalysis experiments are performed to compare the effectiveness of these two surface functionalization strategies on CO2 reduction and ultrafast spectroscopy is used to reveal the underlying photoexcited charge dynamics. We find that the positively-charged quantum dots can support sub-picosecond electron transfer to the carboxylate-based molecular catalyst and also produce >30% selectivity for CO and >170 mmolCO gZnSe-1. However, aggregation reduces activity in approximately one day. In contrast, the negatively-charged quantum dots exhibit >10 ps electron transfer and substantially lower CO selectivity, but they are colloidally stable for days. These results highlight the importance of the quantum dot-catalyst interaction for CO2 reduction. Furthermore, multi-dentate catalyst molecules create a trade-off between photocatalytic efficiency from strong interactions and deleterious aggregation of quantum dot-catalyst assemblies.

Cobalt-based tripodal complexes as molecular catalysts for photocatalytic CO2 reduction

Construction of artificial photosynthetic systems including CO2 reduction is a promising pathway to produce carbon-neutral fuels and mitigate the greenhouse effect concurrently. However, the exploitation of earth-abundant catalysts for photocatalytic CO2 reduction remains a fundamental challenge, which can be assisted by a systematic summary focusing on a specific catalyst family. Cobalt-based complexes featuring tripodal ligands should merit more insightful discussion and summarization, as they are one of the most examined catalyst families for CO2 photoreduction. In this feature article, the key developments of cobalt-based tripodal complexes as molecular catalysts for light-driven CO2 reduction are discussed to offer an upcoming perspective, analyzing the present progress in electronic/steric tuning through ligand modification and dinuclear design to achieve a synergistic effect, as well as the bottlenecks for further development.

Recent Advances on Single-Atom Catalysts for Photocatalytic CO2 Reduction

The present energy crisis and environmental challenges may be efficiently resolved by converting carbon dioxide (CO2 ) into various useful carbon products. The development of more effective catalysts has been the main focus of current research on photocatalytic CO2 reduction. Due to their high atomic efficiency and superior catalytic activity, single-atom catalysts (SACs) have attracted considerable interest in catalytic CO2 conversion. This review discusses the current research developments, obstacles, and potential of SACs for photocatalytic CO2 reduction. And further, discusses the principle of photocatalytic carbon dioxide reduction. This work has compared and analyzed the effects of support materials and active site types in SACs on photocatalytic CO2 reduction performance. This work believes that by sharing these developments, some inspiration for the rational design and development of stable and effective photocatalytic CO2 reduction catalysts based on SACs can be provided.

Highly selective CO2 electrolysis in aqueous media by a water-soluble cobalt dimethyl-bipyridine complex

A water-soluble Co complex with dimethyl-bipyridine ligands reduced CO2 to CO electrochemically with almost 100% selectivity at -0.80 V vs. NHE in an aqueous medium (pH 6.8) without an organic solvent. The reaction overpotential was 270 mV. A possible CO formation mechanism was discussed based on experiments and calculations.

CdO decorated CdS nanorod for enhanced photocatalytic reduction of CO2 to CO

Solar-driven CO₂ reduction into fuels and sustainable energy has attracted increasing attention around the world. However, the photoreduction efficiency remains low due to the low efficiency of separation of electron-hole pairs and high thermal stability of CO₂. In this work, we prepared a CdO decorated CdS nanorod for visible light driven CO₂ reduction. The introduction of CdO facilitates the photoinduced charge carrier separation and transfer and acts as an active site for adsorption and activation of CO₂ molecules. Compared with pristine CdS, CdO/CdS exhibits a nearly 5-fold higher CO generation rate (1.26 mmol g^-1 h^-1). In situ FT-IR experiments indicated that CO₂ reduction on CdO/CdS may follow a COOH* pathway. This study reports the pivotal effect of CdO on photogenerated carrier transfer in photocatalysis and on CO₂ adsorption, which provides a facile way to enhance photocatalytic efficiency.

Rich Landscape of Colloidal Semiconductor-Metal Hybrid Nanostructures: Synthesis, Synergetic Characteristics, and Emerging Applications

Nanochemistry provides powerful synthetic tools allowing one to combine different materials on a single nanostructure, thus unfolding numerous possibilities to tailor their properties toward diverse functionalities. Herein, we review the progress in the field of semiconductor-metal hybrid nanoparticles (HNPs) focusing on metal-chalcogenides-metal combined systems. The fundamental principles of their synthesis are discussed, leading to a myriad of possible hybrid architectures including Janus zero-dimensional quantum dot-based systems and anisotropic quasi 1D nanorods and quasi-2D platelets. The properties of HNPs are described with particular focus on emergent synergetic characteristics. Of these, the light-induced charge-separation effect across the semiconductor-metal nanojunction is of particular interest as a basis for the utilization of HNPs in photocatalytic applications. The extensive studies on the charge-separation behavior and its dependence on the HNPs structural characteristics, environmental and chemical conditions, and light excitation regime are surveyed. Combining the advanced synthetic control with the charge-separation effect has led to demonstration of various applications of HNPs in different fields. A particular promise lies in their functionality as photocatalysts for a variety of uses, including solar-to-fuel conversion, as a new type of photoinitiator for photopolymerization and 3D printing, and in novel chemical and biomedical uses.

Bioinspired and biomolecular catalysts for energy conversion and storage

Metalloenzymes are remarkable for facilitating challenging redox transformations with high efficiency and selectivity. In the area of alternative energy, scientists aim to capture these properties in bioinspired and engineered biomolecular catalysts for the efficient and fast production of fuels from low-energy feedstocks such as water and carbon dioxide. In this short review, efforts to mimic biological catalysts for proton reduction and carbon dioxide reduction are highlighted. Two important recurring themes are the importance of the microenvironment of the catalyst active site and the key role of proton delivery to the active site in achieving desired reactivity. Perspectives on ongoing and future challenges are also provided.

Advancements and Challenges in Reductive Conversion of Carbon Dioxide via Thermo-/Photocatalysis

Carbon dioxide (CO₂) is the major greenhouse gas and also an abundant and renewable carbon resource. Therefore, its chemical conversion and utilization are of great attraction for sustainable development. Especially, reductive conversion of CO₂ with energy input has become a current hotspot due to its ability to access fuels and various important chemicals. Nowadays, the controllable CO₂ hydrogenation to formic acid and alcohols using sustainable H₂ resources has been regarded as an appealing solution to hydrogen storage and CO₂ accumulation. In addition, photocatalytic CO₂ reduction to CO also provides a potential way to utilize this greenhouse gas efficiently. Besides direct CO₂ hydrogenation, CO₂ reductive functionalization integrates CO₂ reduction with subsequent C-X (X = N, S, C, O) bond formation and indirect transformation strategies, enlarging the diverse products derived from CO₂ and promoting CO₂ reductive conversion into a new stage. In this Perspective, the progress and challenges of CO₂ reductive conversion, including hydrogenation, reductive functionalization, photocatalytic reduction, and photocatalytic reductive functionalization are summarized and discussed along with the key issues and future trends/directions in this field. We hope this Perspective can evoke intense interest and inspire much innovation in the promise of CO₂ valorization.

Ligand-Engineered Quantum Dots Decorated Heterojunction Photoelectrodes for Self-Biased Solar Water Splitting

A cost-effective and high-efficiency photoelectrochemical (PEC) water splitting system based on colloidal quantum dots (QDs) represents a potential solar-to-hydrogen (STH) conversion technology to achieve future carbon neutrality. Herein, a self-biased PEC cell consisting of BiVO₄ photoanode and Cu₂ O photocathode both decorated with Zn-doped CuInS₂ (ZCIS) QDs is successfully fabricated. The intrinsic charge dynamics of the photoelectrodes are efficiently optimized via rational engineering of the surface ligands capped on QDs with controllable chain lengths and binding affinities to the metal oxide electrodes. It is demonstrated that the short-chain monodentate 1-dodecanethiol ligands are beneficial to ZCIS QDs for suppressing charge recombination, which enables the construction of tight heterojunction with coupled metal oxide electrodes, leading to effective photo-induced charge transfer/injection for enhanced PEC performance. The QD decorated BiVO₄ and Cu₂ O photoelectrodes in pairs demonstrate a self-biased PEC water splitting process, delivering an STH efficiency of 0.65% with excellent stability under AM 1.5 G one-sun illumination. The results highlight the significance of synergistic ligand and heterojunction engineering to build highly efficient and robust QDs-based PEC devices for self-biased solar water splitting.

Encapsulated CdSe/CdS nanorods in double-shelled porous nanocomposites for efficient photocatalytic CO2 reduction

Colloidal quantum dots have been emerging as promising photocatalysts to convert CO₂ into fuels by using solar energy. However, the above photocatalysts usually suffer from low CO₂ adsorption capacity because of their nonporous structures, which principally reduces their catalytic efficiency. Here, we show that synchronizing imine polycondensation reaction to self-assembly of colloidal CdSe/CdS nanorods can produce micro-meso hierarchically porous nanocomposites with double-shelled nanocomposites. Owing to their hierarchical pores and the ability to separate photoexcited electrons, the self-assembled porous nanocomposites exhibit remarkably higher activity (≈ 64.6 μmol g⁻¹ h⁻¹) toward CO₂ to CO in solid-gas regime than that of nonporous solids from self-assembled CdSe/CdS nanorods under identical conditions. Importantly, the length of the nanorods is demonstrated to be crucial to correlate their ability to long-distance separation of photogenerated electrons and holes along their axial direction. Overall, this approach provides a rational strategy to optimize the CO₂ adsorption and conversion by integrating the inorganic and organic semiconductors.

The authors design double shelled hollow superstructures from self-assembled CdSe/CdS nanorods in covalent organic frameworks for CO2 photo-reduction at a gas/solid interface.

Amphiphilic Polycarbonate Micellar Rhenium Catalysts for Efficient Photocatalytic CO2 Reduction in Aqueous Media

A triblock amphiphilic polymer derived from the copolymerization of CO₂ and epoxides containing a bipyridine rhenium complex in its backbone is shown to effectively catalyze the visible-light-driven reduction of CO₂ to CO. This polymer provides uniformly spherical micelles in aqueous solution, where the metal catalyst is sequestered in the hydrophobic portion of the nanostructured micelle. CO₂ to CO reduction occurs in an efficient visible-light-driven process in aqueous media with turnover numbers up to 110 (>99 % selectivity) in the absence of a photosensitizer, which is a 37-fold enhancement over the corresponding molecular rhenium catalyst in organic solvent. Notably, the amphiphilic polycarbonate micelle rhenium catalyst suppresses H₂ generation, presumably by preventing deactivation of the active catalytic center by water.

Exploiting consecutive photoinduced electron transfer (ConPET) in CO2 photoreduction

The consecutive photoinduced electron transfer (ConPET) process of 1,2,3,5-Tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) in CO₂ photoreduction to achieve powerful reducing species has been disclosed by activating a bis(terpyridine)ruthenium(II) complex bearing a high overpotential for selective light-driven reduction of CO₂ to CO in homogeneous solution.

Ordered heterogeneity of molecular photosensitizer toward enhanced photocatalysis

The photosensitizer is one of the important components in the photocatalytic system. Molecular photosensitizers have well-defined structures, which is beneficial in revealing the catalysis mechanism and helpful for further structural design and performance optimization. However, separation and recycling of the molecular photosensitizers is a great problem. Loading them into/on two/three-dimensional supports through covalent bonds, electrostatic interactions, and supramolecular interactions is a method that enhances their separation and recycling capability. Nonetheless, the structures of the resulting composites are unclear. Thus, the development of highly crystalline heterogeneity methods for molecular photosensitizers, albeit greatly challenging, is meaningful and desirable in photocatalysis, through which heterogeneous photosensitizers with well-defined structures, definite catalysis mechanisms, and good catalytic performance would be expected.

Ordered heterogeneity is significant for molecular photosensitizers to enhance their practical applications. However, the ordered heterogeneity of molecular photosensitizers is still a great challenge. In this article, we describe a supramolecular assembly method for the heterogeneity of molecular photosensitizers, with which a mononuclear Zn(II) molecular photosensitizer in solution was orderly assembled in long range via π–π stacking interactions, affording a cheap, solid photocatalyst (π-1) with a porous structure. With Co(II), Fe(III), or Ni(II) as a cocatalyst, π-1 shows noticeably better photocatalytic activity for CO₂ reduction than in a homogeneous system. The definite crystal structure and precise position of the catalytic center in π-1 were determined by single-crystal X-ray diffraction combined with X-ray diffraction adsorption spectra, based on which the enhanced activity of π-1 for photocatalytic CO₂ reduction was revealed by theoretical calculation. Thus, the reduced energy gap after ordered heterogeneity accelerates the electron transfer, greatly boosting the photocatalytic CO₂ reduction activity. This work demonstrates a method for developing crystalline, heterogeneous photocatalysts with definite structures and enhanced, catalytic performance.

Visible Light-Driven Highly Selective CO2 Reduction to CH4 Using Potassium-Doped g-C3N5

Establishment of an efficient and robust artificial photocatalytic system to convert solar energy into chemical fuels through CO₂ conversion is a cherished goal in the fields of clean energy and environmental protection. In this work, we have explored an emergent low-Z nitrogen-rich carbon nitride material g-C₃N₅ (analogue of g-C₃N₄) for CO₂ conversion under visible light illumination. A significant enhancement of the CH₄ production rate was detected for g-C₃N₅ in comparison to that of g-C₃N₄. Notably, g-C₃N₅ also showed a very impressive selectivity of 100% toward CH₄ as compared to 21% for g-C₃N₄. The photocatalytic CO₂ conversion was performed without using sacrificial reagents. We found that 1% K doping in g-C₃N₅ enhanced its performance even further without compromising the selectivity. Moreover, 1% K-doped g-C₃N₅ also exhibited better photostability than undoped g-C₃N_5. We have also employed density functional theory calculation-based analyses to understand and elucidate the possible reasons for the better photocatalytic performance of K-doped g-C₃N₅.

Highly Efficient Photocatalytic Reduction of CO2 to CO by In Situ Formation of a Hybrid Catalytic System Based on Molecular Iron Quaterpyridine Covalently Linked to Carbon Nitride

Efficient and selective photocatalytic CO₂ reduction was obtained within a hybrid system that is formed in situ via a Schiff base condensation between a molecular iron quaterpyridine complex bearing an aldehyde function and carbon nitride. Irradiation (blue LED) of an CH₃ CN solution containing 1,3-dimethyl-2-phenyl-2,3-dihydro-1H-benzo[d]imidazole (BIH), triethylamine (TEA), Feqpy-BA (qpy-BA=4-([2,2':6',2'':6'',2'''-quaterpyridin]-4-yl)benzaldehyde) and C₃ N₄ resulted in CO evolution with a turnover number of 2554 and 95 % selectivity. This hybrid catalytic system unlocks covalent linkage of molecular catalysts with semiconductor photosensitizers via Schiff base reaction for high-efficiency photocatalytic reduction of CO₂ , opening a pathway for diverse photocatalysis.

Bionic Optical Leaf for Photoreduction of CO2 from Noble Metal Atom Mediated Graphene Nanobubble Arrays

The reduction of CO₂ to useful chemicals by solar irradiation has been of great interest in recent years to tackle the greenhouse effect. Compared with inorganic metal oxide particles, carbonaceous materials, such as graphene, are excellent in light absorption; however, they lack in activity and selectivity because of the challenge to manipulate the band gap and optimize the electron-hole separation, which drives the photoreduction process. In this work, inspired by the delicate natural plant leaf structure, we fabricated orderly stacked graphene nanobubble arrays with nitrogen dopant for the coordination of noble metal atoms to mimic the natural photoreduction process in plant leaves. This graphene metamaterial not only mimics the optical structure of leaf cells, which scatter and absorb light efficiently, but also drives the CO₂ reduction via nitrogen coordinated metal atoms as the chlorophyll does in plants. Our characterizations show that the band gap of nitrogen-doped graphene could be precisely tailored via substitution with different noble metal atoms on the doped site. The noble atoms coordinated on the doped site of graphene metamaterial not only enlarge the light absorption volume but also maximize the utilization of noble metals. The bionic optical leaf metamaterial coordinated with Au atoms exhibits high CO productivity up to 11.14 mmol g_cat^-1 h^-1 and selectivity to 95%, standing as one of the best catalysts among the carbonaceous and metal-based catalysts reported to date. This catalyst also maintained a high performance at low temperatures, manifesting potential applications of this bionic catalyst at polar regions to reduce greenhouse gases.

Photocatalytic Aqueous CO2 Reduction to CO and CH4 Sensitized by Ullazine Supramolecular Polymers

There has been rapid progress on the chemistry of supramolecular scaffolds that harness sunlight for aqueous photocatalytic production of hydrogen. However, great efforts are still needed to develop similar photosynthetic systems for the great challenge of CO₂ reduction especially if they avoid the use of nonabundant metals. This work investigates the synthesis of supramolecular polymers capable of sensitizing catalysts that require more negative potentials than proton reduction. The monomers are chromophore amphiphiles based on a diareno-fused ullazine core that undergo supramolecular polymerization in water to create entangled nanoscale fibers. Under 450 nm visible light these fibers sensitize a dinuclear cobalt catalyst for CO₂ photoreduction to generate carbon monoxide and methane using a sacrificial electron donor. The supramolecular photocatalytic system can generate amounts of CH₄ comparable to those obtained with a precious metal-based [Ru(phen)₃](PF₆)₂ sensitizer and, in contrast to Ru-based catalysts, retains photocatalytic activity in all aqueous media over 6 days. The present study demonstrates the potential of tailored supramolecular polymers as renewable energy and sustainability materials.

Flow synthesis of photocatalytic semiconductor-metal hybrid nanocrystals

Semiconductor-metal hybrid nanostructures are promising materials for photocatalytic applications, providing high efficiencies compared to their composing counterparts. So far, the synthesis of such hybrid nanoparticles was limited to batch reactors, achieving tunability while demonstrating how each of the nanocrystals' characteristics affects photocatalytic performances. Yet, new methodologies should be established to increase the synthetic yield while maintaining high control over the resulting structures. Herein, scalable advanced flow techniques are introduced, yielding ZnSe-metal hybrid nanoparticles either in a thermal growth or photo-induced growth regime. Firstly, thermal gold growth in the flow reactor is achieved with good control over the metal tip size and the nanoparticle morphology. We address the dependence of the reaction on temperature, the precursor to nanorod molar ratios, and additional parameters. Additionally, light-induced growth by the flow reactor is demonstrated for platinum clusters. The quality of the resulting hybrids is directly demonstrated by their functionality in photocatalytic hydrogen generation by water reduction, displaying enhanced activity compared to bare ZnSe nanorods. The fairly straightforward adaptation of such powerful flow-reaction techniques to scale-up photocatalytic hybrid nanoparticle syntheses takes them one step forwards towards the realization of their potential in real-life application scenarios.

Dual-Single-Atom Tailoring with Bifunctional Integration for High-Performance CO2 Photoreduction

Single-atom photocatalysis has been demonstrated as a novel strategy to promote heterogeneous reactions. There is a diversity of monoatomic metal species with specific functions; however, integrating representative merits into dual-single-atoms and regulating cooperative photocatalysis remain a pressing challenge. For dual-single-atom catalysts, enhanced photocatalytic activity would be realized through integrating bifunctional properties and tuning the synergistic effect. Herein, dual-single-atoms supported on conjugated porous carbon nitride polymer are developed for effective photocatalytic CO₂ reduction, featuring the function of cobalt (Co) and ruthenium (Ru). A series of in situ characterizations and theoretical calculations are conducted for quantitative analysis of structure-performance correlation. It is concluded that the active Co sites facilitate dynamic charge transfer, while the Ru sites promote selective CO₂ surface-bound interaction during CO₂ photoreduction. The combination of atom-specific traits and the synergy between Co and Ru lead to the high photocatalytic CO₂ conversion with corresponding apparent quantum efficiency (AQE) of 2.8% at 385 nm, along with a high turnover number (TON) of more than 200 without addition of any sacrificial agent. This work presents an example of identifying the roles of different single-atom metals and regulating the synergy, where the two metals with unique properties collaborate to further boost the photocatalytic performance.

Quantum Dot-Sensitized Photoreduction of CO2 in Water with Turnover Number > 80,000

Climate change and global energy demands motivate the search for sustainable transformations of carbon dioxide (CO₂) to storable liquid fuels. Photocatalysis is a pathway for direct conversion of CO₂ to CO, one step within light-powered reaction networks that could, if efficient enough, transform the solar energy conversion landscape. To date, the best performing photocatalytic CO₂ reduction systems operate in nonaqueous solvents, but technologically viable solar fuels networks will likely operate in water. Here we demonstrate catalytic photoreduction of CO₂ to CO in pure water at pH 6-7 with an unprecedented combination of performance parameters: turnover number (TON(CO)) = 72,484-84,101, quantum yield (QY) = 0.96-3.39%, and selectivity (S_CO) > 99%, using CuInS₂ colloidal quantum dots (QDs) as photosensitizers and a Co-porphyrin catalyst. At higher catalyst concentration, the system reaches QY = 3.53-5.23%. The performance of the QD-driven system greatly exceeds that of the benchmark aqueous system (926 turnovers with a quantum yield of 0.81% and selectivity of 82%), due primarily to (i) electrostatic attraction of the QD to the catalyst, which promotes fast multielectron delivery and colocalization of protons, CO₂, and catalyst at the source of photoelectrons, and (ii) termination of the QD's ligand shell with free amines, which capture CO₂ as carbamic acid that serves as a reservoir for CO₂, effectively increasing its solubility in water, and lowers the onset potential for catalytic CO₂ reduction by the Co-porphyrin. The breakthrough efficiency achieved in this work represents a nonincremental step in the realization of reaction networks for direct solar-to-fuel conversion.

Erbium Single Atom Composite Photocatalysts for Reduction of CO2 under Visible Light: CO2 Molecular Activation and 4f Levels as an Electron Transport Bridge

It is still challenging to design a stable and efficient catalyst for visible-light CO₂ reduction. Here, Er³⁺ single atom composite photocatalysts are successfully constructed based on both the special role of Er³⁺ and the special advantages of Zn₂ GeO₄ /g-C₃ N₄ heterojunction in the photocatalysis reduction of CO₂ . Especially, Zn₂ GeO₄ :Er³⁺ /g-C₃ N₄ obtained by in situ synthesis is not only more conducive to the tight junction of Zn₂ GeO₄ and g-C₃ N₄ , but also more favorable for g-C₃ N₄ to anchor rare-earth atoms. Under visible-light irradiation, Zn₂ GeO₄ :Er³⁺ /g-C₃ N₄ shows more than five times enhancement in the catalytic efficiency compared to that of pure g-C₃ N₄ without any sacrificial agent in the photocatalytic reaction system. A series of theoretical and experimental results show that the charge density around Er, Ge, Zn, and O increases compared with Zn₂ GeO₄ :Er³⁺ , while the charge density around C decreases compared with g-C₃ N₄ . These results show that an efficient way of electron transfer is provided to promote charge separation, and the dual functions of CO₂ molecular activation of Er³⁺ single atom and 4f levels as electron transport bridge are fully exploited. The pattern of combining single-atom catalysis and heterojunction opens up new methods for enhancing photocatalytic activity.

Electrocatalytic and Photocatalytic Reduction of Carbon Dioxide by Earth-abundant Bimetallic Molecular Catalysts

Converting CO₂ into useful resources by electrocatalysis and photocatalysis is a promising strategy for recycling of the gas and electrification of industries. Numerous studies have shown that multinuclear metal catalysts have higher selectivity and catalytic activity than monometallic catalysts due to the synergistic effects between the metal sites. In this review, we summarize some of the recent progress on the electrocatalytic and photocatalytic reduction of CO₂ by earth-abundant bimetallic molecular catalysts.

Stand-Alone CdS Nanocrystals for Photocatalytic CO2 Reduction with High Efficiency and Selectivity

The development of a cost-effective photocatalyst is highly anticipated to achieve efficient photocatalytic CO₂ reduction with superior selectivity, which is still facing the lack of valid settlements. Herein, 4-mercaptopyridine (PD) as the building block of a capping ligand is tightly decorated on the surface of CdS nanocrystals (CdS-PD) using a facile ligand-exchange strategy, to exploit a cost-effective photocatalyst for photocatalytic CO₂ reduction without any cocatalysts. The conjugated structure of PD can facilitate the delocalization of photogenerated electrons in CdS nanocrystals, bringing forth an improved charge separation efficiency. More importantly, N-protonated PD can enable the easy formation of a six-membered ring intermediate with CO₂ assisted by water, which can serve as the efficient active site to achieve photocatalytic CO₂ reduction. In the absence of a cocatalyst, stand-alone CdS-PD nanocrystals exhibit an excellent CO yield of 20.35 mmol g^-1 h^-1 concomitant with a high selectivity of 95.3% for the CO₂-to-CO conversion under visible light, which are remarkably superior than those of CdS nanocrystals possessing traditional alkyl-chain and other conjugated capping ligands.

Hybridization of Molecular and Graphene Materials for CO2 Photocatalytic Reduction with Selectivity Control

In the quest for designing efficient and stable photocatalytic materials for CO₂ reduction, hybridizing a selective noble-metal-free molecular catalyst and carbon-based light-absorbing materials has recently emerged as a fruitful approach. In this work, we report about Co quaterpyridine complexes covalently linked to graphene surfaces functionalized by carboxylic acid groups. The nanostructured materials were characterized by X-ray photoemission spectroscopy, X-ray absorption spectroscopy, IR and Raman spectroscopies, high-resolution transmission electron microscopy and proved to be highly active in the visible-light-driven CO₂ catalytic conversion in acetonitrile solutions. Exceptional stabilities (over 200 h of irradiation) were obtained without compromising the selective conversion of CO₂ to products (>97%). Most importantly, complete selectivity control could be obtained upon adjusting the experimental conditions: production of CO as the only product was achieved when using a weak acid (phenol or trifluoroethanol) as a co-substrate, while formate was exclusively obtained in solutions of mixed acetonitrile and triethanolamine.

Imidazolium-modification enhances photocatalytic CO2 reduction on ZnSe quantum dots

Colloidal photocatalysts can utilize solar light for the conversion of CO₂ to carbon-based fuels, but controlling the product selectivity for CO₂ reduction remains challenging, in particular in aqueous solution. Here, we present an organic surface modification strategy to tune the product selectivity of colloidal ZnSe quantum dots (QDs) towards photocatalytic CO₂ reduction even in the absence of transition metal co-catalysts. Besides H₂, imidazolium-modified ZnSe QDs evolve up to 2.4 mmol_CO g_ZnSe ^-1 (TON_QD > 370) after 10 h of visible light irradiation (AM 1.5G, λ > 400 nm) in aqueous ascorbate solution with a CO-selectivity of up to 20%. This represents a four-fold increase in CO-formation yield and 13-fold increase in CO-selectivity compared to non-functionalized ZnSe QDs. The binding of the thiolated imidazolium ligand to the QD surface is characterized quantitatively using ¹H-NMR spectroscopy and isothermal titration calorimetry, revealing that a subset of 12 to 17 ligands interacts strongly with the QDs. Transient absorption spectroscopy reveals an influence of the ligand on the intrinsic charge carrier dynamics through passivating Zn surface sites. Density functional theory calculations indicate that the imidazolium capping ligand plays a key role in stabilizing the surface-bound *CO₂ ^- intermediate, increasing the yield and selectivity toward CO production. Overall, this work unveils a powerful tool of using organic capping ligands to modify the chemical environment on colloids, thus enabling control over the product selectivity within photocatalyzed CO₂ reduction.

An iron-nitrogen doped carbon and CdS hybrid catalytic system for efficient CO2 photochemical reduction

Iron porphyrin and carbon black (CB) were utilized to fabricate an iron-nitrogen doped carbon (Fe-N-C) catalyst to create a new heterogeneous catalytic system with CdS to drive CO2 reduction to CO under UV/vis light (AM 1.5G) irradiation. The system delivers a high CO production yield of 111 mmol gcat-1 and a large turnover number (TON) of 1.22 × 103 in 8 h with a selectivity of 85%, all of which are competitive with state-of-the-art systems. The mechanism of the system was investigated by experimental and theoretical methods indicating that the high affinity between the iron active center and the *COOH intermediate facilitates the brilliant catalytic performance. This work provides a new direction for constructing heterogeneous CO2 photoreduction systems.

Highly Efficient and Selective Visible-Light Driven CO2 Reduction by Two Co-Based Catalysts in Aqueous Solution

Photocatalytic CO₂ reduction has been considered as a promising approach to solve energy and environmental problems. Nevertheless, developing inexpensive photocatalysts with high efficiency and selectivity remains a big challenge. In this study, two Co-based complexes [Co₂(L¹)Cl₂] (1-Co) and [Co(L²)Cl] (2-Co) were synthesized by treating two DPA-based (DPA: dipicolylamine) ligands with Co²⁺, respectively. Under visible-light irradiation, the performance of 1-Co as a homogeneous photocatalyst for CO₂ reduction in aqueous media has been explored by using [Ru(phen)₃]²⁺ as a photosensitizer, and triethylolamine (TEOA) as a sacrificial reductant. 1-Co shows high photocatalytic activity for CO₂-to-CO conversion, corresponding to the high TON_CO of 2600 and TOF_CO of 260 h^-1 (TON_CO = turnover number for CO; TOF_CO = turnover frequency for CO). High selectivity of 97% for CO formation is also achieved. The control experiments catalyzed by 2-Co demonstrated that two Co(II) centers in 1-Co may operate independently and activate one CO₂ molecule each. Furthermore, the proposed mechanism of 1-Co for photocatalytic CO₂ reduction has been investigated via electrochemical analysis, a series of quenching experiments, and density functional theory calculations.

Tale of Two Layered Semiconductor Catalysts toward Artificial Photosynthesis

The ever-increasing reliance on nonrenewable fossil fuels due to massive urbanization and industrialization created problems such as depletion of the primary feedstock and raised the atmospheric CO₂ levels causing global warming. A smart and promising approach is artificial photosynthesis that photocatalytically valorizes CO₂ into high-value chemicals. The inexpensive layered semiconductors like g-C₃N₄ and rGO or GO have the potential to make the process practically feasible for real applications. The suitable band positions with respect to the reduction potentials coupled with the typical surface properties of these layered semiconductors play a beneficial role in photoreduction of CO₂. Additionally, the creation of heterojunction interfaces to achieve the Z-scheme by anchoring g-C₃N₄ and rGO with another semiconductor with proper band alignment and dispersing plasmonic nano metals to obtain Schottky barriers on the layered surfaces also help retarding the electron-hole recombination and boost up the catalytic efficacy. Extensive exploration happened in recent years toward artificial photosynthesis over these materials, which needs a critical compendium. Surprisingly, in spite of the recent explosion of studies on photocatalytic reduction of CO₂ over metal-free semiconductors, there is not a single review on comparing the mechanistic aspects of photoreduction of CO₂ over the layered semiconductors g-C₃N₄ and rGO. This review stands out as a unique documentation, where the mechanism of photocatalytic reduction of CO₂ over this set of materials is critically examined in the context of band and surface modifications. An overall conclusion and outlook at the end indicates the need to develop prototypes for artificial photosynthesis with these well-studied semiconducting layered materials to yield solar fuels.

Single Ni Atoms Anchored on Porous Few-Layer g-C3 N4 for Photocatalytic CO2 Reduction: The Role of Edge Confinement

It is greatly intriguing yet remains challenging to construct single-atomic photocatalysts with stable surface free energy, favorable for well-defined atomic coordination and photocatalytic carrier mobility during the photoredox process. Herein, an unsaturated edge confinement strategy is defined by coordinating single-atomic-site Ni on the bottom-up synthesized porous few-layer g-C₃ N₄ (namely, Ni₅ -CN) via a self-limiting method. This Ni₅ -CN system with a few isolated Ni clusters distributed on the edge of g-C₃ N₄ is beneficial to immobilize the nonedged single-atomic-site Ni species, thus achieving a high single-atomic active site density. Remarkably, the Ni₅ -CN system exhibits comparably high photocatalytic activity for CO₂ reduction, giving the CO generation rate of 8.6 µmol g^-1 h^-1 under visible-light illumination, which is 7.8 times that of pure porous few-layer g-C₃ N₄ (namely, CN, 1.1 µmol g^-1 h^-1 ). X-ray absorption spectrometric analysis unveils that the cationic coordination environment of single-atomic-site Ni center, which is formed by Ni-N doping-intercalation the first coordination shell, motivates the superiority in synergistic N-Ni-N connection and interfacial carrier transfer. The photocatalytic mechanistic prediction confirms that the introduced unsaturated Ni-N coordination favorably binds with CO₂ , and enhances the rate-determining step of intermediates for CO generation.

Superhigh flexibility and out-of-plane piezoelectricity together with strong anharmonic phonon scattering induced extremely low lattice thermal conductivity in hexagonal buckled CdX (XS, Se) monolayers

Although CdX (X = S, Se) has been mostly studied in the field of photocatalysis, photovoltaics, their intrinsic properties, such as, mechanical, piezoelectric, electron and phonon transport properties have been completely overlooked in buckled CdX monolayers. Ultra-low lattice thermal conductivity [1.08 W m-1K-1(0.75 W m-1K-1)] and high p-type Seebeck coefficient [1300μV K-1(850μV K-1)] in CdS (CdSe) monolayers have been found in this work based on first-principles DFT coupled to semi-classical Boltzmann transport equations, combining both the electronic and phononic transport. The dimensionless thermoelectric figure of merit is calculated to be 0.78 (0.5) in CdS (CdSe) monolayers at room temperature, which is comparable to that of two-dimensional (2D) tellurene (0.8), arsenene and antimonene (0.8), indicating its great potential for applications in 2D thermoelectrics. Such a low lattice thermal conductivity arise from the participation of both acoustic [91.98% (89.22%)] and optical modes [8.02% (10.78%)] together with low Debye temperature [254 K (187 K)], low group velocity [4 km s-1(3 km s-1)] in CdS (CdSe) monolayers, high anharmonicity and short phonon lifetime. Substantial cohesive energy (∼4-5 eV), dynamical and mechanical stability of the monolayers substantiate the feasibility in synthesizing the single layers in experiments. The inversion symmetry broken along thezdirection causes out-of-plane piezoelectricity. |d33| ∼ 21.6 pm V-1, calculated in CdS monolayer is found to be the highest amongst structures having atomic-layer thickness. Superlow Young's modulus ∼41 N m-1(31 N m-1) in CdS (CdSe) monolayers, which is comparable to that of planar CdS (29 N m-1) and TcTe2(34 N m-1), is an indicator of its superhigh flexibility. Direct semiconducting band gap, high carrier mobility (∼500 cm2V-1s-1) and superhigh flexibility in CdX monolayers signify its gigantic potential for applications in ultrathin, stretchable and flexible nanoelectronics. The all-round properties can be synergistically combined together in futuristic applications in nano-piezotronics as well.

Synergetic catalysis of a cobalt-based coordination polymer for selective visible-light driven CO2-to-CO conversion

Herein, based on the strategy of synergetic catalysis, we report a cobalt-based coordination polymer PEI₆-Co. As a heterogeneous catalyst, PEI₆-Co shows a selectivity of 95% and a yield of 1170 mmol g⁻¹ for visible-light-driven CO₂-to-CO conversion in a water containing system, which is almost 2.8 times that of the mononuclear cobalt catalyst CoL¹ and is comparable to that of the dinuclear cobalt catalyst Co₂L.

Herein, based on the strategy of synergetic catalysis, we report a cobalt-based coordination polymer PEI₆-Co for the visible-light-driven CO₂-to-CO conversion in water containing system.

Linear correlation models for the redox potential of organic molecules in aqueous solutions

In this study, we use the molecular orbital energy approximation (MOEA) and the energy difference approximation (EDA) to build linear correlation models for the redox potentials of 53 organic compounds in aqueous solutions. The molecules evaluated include nitroxides, phenols, and amines. Both the MOEA and EDA methods yield similar correlation models, however, the MOEA method is less computationally expensive. Correlation coefficients (R²) below 0.3 and mean absolute errors above 0.25 V were found for correlation models built without solvent effects. When explicit water molecules and a continuum solvent model are added to the calculations, correlation coefficients close to 0.8 are reached, and mean absolute errors below 0.18 V are obtained. The incorporation of solvent effects is necessary for good correlation models, particularly for redox processes of charged molecules in aqueous solutions. A comparison of the correlation models from different methodologies is provided. Graphical abstract.

Nonepitaxial Gold-Tipped ZnSe Hybrid Nanorods for Efficient Photocatalytic Hydrogen Production

For the first time, colloidal gold (Au)-ZnSe hybrid nanorods (NRs) with controlled size and location of Au domains are synthesized and used for hydrogen production by photocatalytic water splitting. Au tips are found to grow on the apices of ZnSe NRs nonepitaxially to form an interface with no preference of orientation between Au(111) and ZnSe(001). Density functional theory calculations reveal that the Au tips on ZnSe hybrid NRs gain enhanced adsorption of H compared to pristine Au, which favors the hydrogen evolution reaction. Photocatalytic tests reveal that the Au tips on ZnSe NRs effectively enhance the photocatalytic performance in hydrogen generation, in which the single Au-tipped ZnSe hybrid NRs show the highest photocatalytic hydrogen production rate of 437.8 µmol h^-1 g^-1 in comparison with a rate of 51.5 µmol h^-1 g^-1 for pristine ZnSe NRs. An apparent quantum efficiency of 1.3% for hydrogen evolution reaction for single Au-tipped ZnSe hybrid NRs is obtained, showing the potential application of this type of cadmium (Cd)-free metal-semiconductor hybrid nanoparticles (NPs) in solar hydrogen production. This work opens an avenue toward Cd-free hybrid NP-based photocatalysis for clean fuel production.