Improving the Supercapacitor Performance by Dispersing SiO2 Microspheres in Electrodes

Hydrothermal Synthesis of CuO/RuO2/MWCNT Nanocomposites with Morphological Variants for High Efficient Supercapacitors

In this study, we develop the optimum composition of copper oxide/ruthenium oxide and multi-walled carbon nanotubes (CuO/RuO2/MWCNTs) ternary nanocomposite via a hydrothermal method as an efficient electrode material for supercapacitor applications. The ratio between CuO and RuO2 varied to improve the electrochemical performance of the electrode. The synthesized nanocomposites are analyzed by high-resolution scanning electron microscopy (HR-SEM), thermo gravimetric analyzer (TGA) and electrochemical impedance spectroscopy (EIS). Furthermore, the elemental composition is analyzed by energy dispersive X-ray (EDX) spectroscopy and the specific capacitance was analyzed by cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) methods. The electrochemical investigations is conducted in a three-electrode system and the sample is attached on a stainless steel plate as the working electrode; platinum wire works as the counter electrode and Ag/AgCl electrode as the reference electrode, adopting 3 M (NH4)2SO4 as the electrolyte. The resultant of CuO/RuO2/MWCNT nanocomposite with 7 wt% Cu and 20 wt% Ru was found to perform the highest specific capacitance of 461.59 F/g in a current density of 1 A/g.

Hollow TiO2 Microsphere/Graphene Composite Photocatalyst for CO2 Photoreduction

In an attempt to improve the photocatalytic activity of anatase TiO2, we developed a composite photocatalyst composed of hollow TiO2 microspheres (hTS) and graphene. The hTS were prepared through a two-step hydrothermal process, where SiO2 microspheres with desirable diameters of 100–400 nm were used as sacrificial templates. Accordingly, the effect of the hTS cavity size on the activity of the catalyst in wet CO2 photoreduction (CO2PR) was studied. Furthermore, it was established that the hydrothermal pH value crucially influences the photocatalytic activity of the hTS photocatalyst, as well as its composition and microstructure. The hTS photocatalyst was also combined with graphene (0–90 wt%) to improve its photocatalytic activity. This study provides insight into the optimal microsphere diameter, hydrothermal pH value, and graphene/hTSx ratio required for designing hollow microsphere-based photocatalysts with enhanced CO2PR performances.

NiCo2O4/RGO Hybrid Nanostructures on Surface-Modified Ni Core for Flexible Wire-Shaped Supercapacitor

In this work, we report surface-modified nickel (Ni) wire/NiCo2O4/reduced graphene oxide (Ni/NCO/RGO) electrodes fabricated by a combination of facile solvothermal and hydrothermal deposition methods for wire-shaped supercapacitor application. The effect of Ni wire etching on the microstructural, surface morphological and electrochemical properties of Ni/NCO/RGO electrodes was investigated in detail. On account of the improved hybrid nanostructure and the synergistic effect between spinel-NiCo2O4 hollow microspheres and RGO nanoflakes, the electrode obtained from Ni wire etched for 10 min, i.e., Ni10/NCO/RGO exhibits the lowest initial equivalent resistance (1.68 Ω), and displays a good rate capability with a volumetric capacitance (2.64 F/cm3) and areal capacitance (25.3 mF/cm2). Additionally, the volumetric specific capacitance calculated by considering only active material volume was found to be as high as 253 F/cm3. It is revealed that the diffusion-controlled process related to faradaic volume processes (battery type) contributed significantly to the surface-controlled process of the Ni10/NCO/RGO electrode compared to other electrodes that led to the optimum electrochemical performance. Furthermore, the wire-shaped supercapacitor (WSC) was fabricated by assembling two optimum electrodes in-twisted structure with gel electrolyte and the device exhibited 10 μWh/cm3 (54 mWh/kg) energy density and 4.95 mW/cm3 (27 W/kg) power density at 200 μA. Finally, the repeatability, flexibility, and scalability of WSCs were successfully demonstrated at various device lengths and bending angles.

Microwave-Assisted Hydrothermal Preparation of Corn Straw Hydrochar as Supercapacitor Electrode Materials

In this work, we propose the microwave-assisted hydrothermal activation method to synthesize supercapacitor electrode materials from corn straw under a small amount of the potassium catalyst (30 wt %), which can meet the environmental protection and low-cost requirement. With the extension of radiation time from 40 to 100 min, the pore structure of hydrochar expands from the micropore to hierarchical pore, and the microstructure evolves from an amorphous structure to graphene-like sheets. Microwave-assisted hydrothermal activation can control the synergistic development of hierarchical pore and graphene-like sheets of hydrochar under the condition of using a lesser amount of the catalyst. The as-obtained HTC-40/70/100 shows an excellent graphitization degree and the developed hierarchical pores. By comparing the electrochemical performance of the symmetrical capacitor devices composed of corn straw hydrochar and pyrochar in organic electrolytes, we have found that the hydrochar is suitable for organic system symmetric capacitance, and the pore structure and graphitization degree are closely related to the transmission of ions and electrons in the electrolyte. Therefore, HTC-100 with a high specific surface area (1781 m²/g) and highly ordered microstructure has the best electrochemical performance.

Facile Fabrication of Nickel Aluminum Layered Double Hydroxide/Carbon Nanotube Electrodes Toward High-Performance Supercapacitors

The electrode, as one of the key components in supercapacitors, has a pivotal effect on the overall performances. In this work, a series of composite electrode materials are proposed via the combination of nickel aluminum layered double hydroxides (NiAl-LDHs) and carbon nanotubes (CNTs). To begin with, materials with different ratios of the two compositions are fabricated with a coprecipitation method. After that, various characterization methods indicate that the NiAl-LDH/CNT composites exhibit an irregular thin platelet structure with a well-constructed conductive network inside. Furthermore, the effect of the CNT ratio on the electrochemical property is subsequently investigated, which proves that the conductive network of CNTs is beneficial for the transport of the electrons and strengthens the platelet structure. The results show that when the amount of CNTs reaches 1.5 wt %, it can yield a high specific capacitance of 2447 F g^-1 at 2 A g^-1, with a good cycling stability of 90.1% after 2500 cycles, indicating high application potential in positive electrodes of pseudocapacitors. The synergistic effects of NiAl-LDHs and CNTs are thought to be the main reasons for the good properties of NiAl-LDHs/CNTs composites.