Application of Polyoxometalates in Chemiresistive Gas Sensors: A Review

Assessing the Influence of Confinement on the Stability of Polyoxometalate-Functionalized Surfaces: A Soft Sequential Immobilization Approach for Electrochromic Devices

A functionalization process has been developed and the experimental conditions optimized allowing the immobilization of first-row transition metal (Mn+) containing polyoxometalates (POMs) with the formula [M(H2O)P2W17O61](10-n)- on transparent indium-tin oxide (ITO) electrodes for electrochromic applications. Both flat ITO grafted with 4-sulfophenyl moieties and sulfonate-functionalized vertically oriented silica films on ITO have been used as electrode supports to evaluate possible confinement effects provided by the mesoporous matrix on the stability of the modified surfaces and their electrochromic properties. Functionalization involved a two-step sequential process: (i) the immobilization of hexaaqua metallic ions, such as Fe(H2O)63+, onto the sulfonate-functionalized materials achieved through hydrogen bonding interactions between the sulfonate functions and aqua ligands (water molecules) coordinated to the metallic ions facilitating and stabilizing the attachment of the metallic ions to the sulfonated surfaces; (ii) their coordination to [P2W17O61]10- species to generate "in situ" the target [Fe(H2O)P2W17O61]7- moieties. Comparison of the characterized surfaces clearly evidenced a significant improvement in the long-term stability of the nanostructured [Fe(H2O)P2W17O61]7--functionalized silica films compared to the less constrained flat [Fe(H2O)P2W17O61]7--modified ITO electrodes for which a rapid loss of [P2W17O61]10- species was observed. Concordantly, the [Fe(H2O)P2W17O61]7- POM confined in the mesoporous films coated on ITO gave rise to much better and stable electrochromic properties, with a transmittance modulation of 40% at 515 nm.

Laser-Induced Preparation of Anderson-Type Polyoxometalate-Derived Sulfide/Oxide Electrocatalysts for Electrochemical Water Oxidation

Developing cost-effective and high-active electrocatalysts is vital to enhance the electrocatalytic performance for oxygen evolution reaction (OER). However, traditional pyrolysis methods require complicated procedures, exact temperatures, and long reaction times, leading to high costs and low yields of electrocatalysts in potential industrial applications. Herein, a rapid and economic laser-induced preparation strategy is proposed to synthesize three bimetallic sulfide/oxide composites (MMoOS, M=Fe, Co, and Ni) on a nickel foam (NF) substrate. A focused CO2 laser with high energy is applied to decompose Anderson-type polyoxometalate (POM)-based precursors, enabling the creation of abundant heteropore and defective structures in the MMoOS composites that have multi-components of MS/Mo4O11/MoS2. Remarkably, owing to the structural interactions between the active species, FeMoOS shows superior electrocatalytic performance for OER in an alkaline medium, exhibiting a low overpotential of 240 mV at 50 mA cm-2, a small Tafel slope of 79 mV dec-1, and good durability for 80 h. Physical characterizations after OER imply that partially dissolved Mo-based species and new-formed NiO/NiOOH can effectively uncover abundant active sites, fasten charge transfer, and modify defective structures. This work provides a rapid laser-induced irradiation method for the synthesis of POM-derived nanocomposites as promoted electrocatalysts.

Towards an E-nose: Metal-organic frameworks based quartz crystal microbalance array for fruit ripeness indexing

Ethylene is a hormone for fruit ripening control, and for the purpose of maintaining plant quality, ethylene monitoring is crucial. Due to the simple structure and limited functionality, the technical realization of ethylene detection by an artificial sensor remains a challenge. In this paper, we present a metal-organic frameworks (MOFs) array based electronic nose (e-nose) for rapid and accurate determination of ethylene. Six zirconium-based MOFs with systematically modified pore sizes and π-π binding sites have been prepared and fabricated into a sensor array using quartz crystal microbalance (QCM) technology. By virtue of the synergistic features of six MOF sensors, selectivity detection of ethylene has been achieved. The detection limit reaches to 0.27 ± 0.02 ppm, and high selectivity and stability (98.29 % ± 0.88 %) could also be confirmed. By submitting data to machine learning algorithm, an e-nose system could be established for discriminating ethylene from mixtures with a qualitative accuracy of 90.30 % and quantitative accuracy of 98.89 %. Practical evaluation suggests that the e-nose could index the fruit quality based on the accurate detection of ethylene released during fruit ripeness. This work demonstrates the promising potential of fabricating MOFs based e-nose systems for practical monitoring applications by selectively detecting challengeable target molecules.

Gold Nanoparticles Capped with a Novel Titanium(IV)-Containing Polyoxomolybdate Cluster: Selective and Enhanced Bactericidal Effect Against Escherichia coli

Bacterial infections are a public health threat of increasing concern in medical care systems; hence, the search for novel strategies to lower the use of antibiotics and their harmful effects becomes imperative. Herein, the antimicrobial performance of four polyoxometalate (POM)-stabilized gold nanoparticles (Au@POM) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as Gram-negative and Gram-positive bacteria models, respectively, is studied. The bactericidal studies performed, both in planktonic and sessile forms, evidence the antimicrobial potential of these hybrid nanostructures with selectivity toward Gram-negative species. In particular, the Au@GeMoTi composite with the novel [Ti2 (HGeMo7 O28 )2 ]10- POM capping ligand exhibits outstanding bactericidal efficiency with a minimum inhibitory concentration of just 3.12 µm for the E. coli strain, thus outperforming the other three Au@POM counterparts. GeMoTi represents the fourth example of a water-soluble TiIV -containing polyoxomolybdate, and among them, the first sandwich-type structure having heteroatoms in high-oxidation state. The evaluation of the bactericidal mechanisms of action points to the cell membrane hyperpolarization, disruption, and subsequent nucleotide leakage and the low cytotoxicity exerted on five different cell lines at antimicrobial doses demonstrates the antibiotic-like character. These studies highlight the successful design and development of a new POM-based nanomaterial able to eradicate Gram-negative bacteria without damaging mammalian cells.

Post transition metal substituted Keggin-type POMs as thin film chemiresistive sensors for H2O and CO2 detection

Chemiresitive sensing allows the affordable and facile detection of small molecules such as H2O and CO2. Herein, we report a novel class of Earth-abundant post transition metal substituted Keggin polyoxometalates (POMs) for chemiresistive sensing applications, with conductivities up to 0.01 S cm-1 under 100% CO2 and 65% Relative Humidity (RH).

Aryl selenonium vs. aryl sulfonium counterions in polyoxometalate chemistry: the impact of Se+ cationic centers on the photocatalytic reduction of dichromate

A selenonium organic counter ion has been used in polyoxometalate chemistry to develop a new aryl selenonium polyoxometalate (POM) hybrid, and its photocatalytic properties have been explored in comparison with an aryl sulfonium POM-hybrid counterpart for the first time. The chalcogenonium counterions, namely, methyldiphenylsulfonium trifluoromethane sulfonate (MDPST) and methyldiphenylselenonium trifluoromethane sulfonate (MDPSeT), and their octamolybdate ([Mo8O26]4-) hybrids, 1 and 2, with the general formula (C13H13X)4[Mo8O26] (where X = S for 1 and Se for 2) were synthesized and characterized. Hybrids 1 and 2 vary in their chalcogenonium cationic center (S+vs. Se+), which enabled a direct comparison of their photocatalytic properties as a function of the cationic center. The photocatalytic activities of hybrids 1 and 2 were tested using the reduction of dichromate (Cr2O72-) as a model reaction under UV irradiation. A 99% photocatalytic reduction of Cr2O72- with a rate constant of 0.0305 min-1 was achieved with hybrid 2, while only a 67% reduction with a rate constant of 0.0062 min-1 was observed with hybrid 1 in 180 minutes. The better catalytic performance of hybrid 2 may be correlated to the larger atomic radii of Se than S, which helps in better stabilizing the photogenerated electron-hole (e--h+) pair on the POM cluster by polarizing its lone pair more efficiently compared to S. The catalytic recyclability was tested for up to 4 cycles using hybrid 2, and up to 98% reduction was obtained even after the 4th cycle. Recyclability tests and control experiments also indicated the generation of some elemental Se through possible cleavage of some C-Se bonds of MDPSe under prolonged UV exposure during catalysis, and the Se thus generated was found to contribute to the catalytic reduction of dichromate. This study, therefore, opens new avenues for aryl selenonium moieties and their POM hybrids for potential catalytic applications.

Ultrafast Response and High Selectivity of Diethylamine Gas Sensors at Room Temperature Using MOF-Derived 1D CuO Nano-Ellipsoids

Environmental and health monitoring requires low-cost, high-performance diethylamine (DEA) sensors. Materials based on metal-organic frameworks (MOFs) can detect hazardous gases due to their large specific surface area, many metal sites, unsaturated sites, functional connectivity, and easy calcination to remove the scaffold. However, developing facile materials with high sensitivity and selectivity in harsh environments for accurate DEA detection at a low detection limit (LOD) at room temperature (RT) is challenging. In this study, p-type semiconducting porous CuOx sensing materials were synthesized using a simple solvothermal process and annealed in an argon atmosphere at three different temperatures (x = 400, 600, and 800 °C). Significant variations in particle size, specific area, crystallite size, and shape were noticed when the annealing temperature was elevated. Cu-MIL-53 annealed at 400 °C (CuO-400) has a typical nanoellipsoid (NEs) shape with a length of 61.5 nm and a diameter of 33.2 nm. Surprisingly, CuO-400 NEs showed an excellent response to DEA with an ultra-LOD (Rg/Ra = 7.3 @ 100 ppb, 55% relative humidity), excellent selectivity and sensitivity (Rg/Ra = 236 @ 15 ppm), exceptional long-term stability and repeatability, and a fast response/recovery period at RT, outperforming most previously reported materials. CuO-400 NEs have outstanding gas-sensing characteristics due to their high porosity, 1D nanostructure, unsaturated Cu sites (Cu+ and Cu2+), large specific surface area, and numerous oxygen vacancies. This study presents a generic approach to produce future CuO derived from Cu-MOFs-sensitive materials, revealing new insights into the design of effective sensors for environmental monitoring at RT.

Combination of covalent organic frameworks (COFs) and polyoxometalates (POMs): the preparation strategy and potential application of COF-POM hybrids

Both covalent organic frameworks (COFs) and polyoxometalates (POMs) show excellent properties and application potential in many fields, thus receiving widespread attention. In recent years, COF-POM hybrid materials were prepared by combining COFs and POMs through physical or chemical methods. COF-POM hybrids have shown high performance in many fields, such as catalysis, sensing, energy storage, and biomedicine. In this review, we introduced the preparation strategy and application of COF-POM hybrids in detail. We believe that the combination of COFs and POMs will provide more abundant functions and broad application prospects.

PEDOT Films Doped with Titanyl Oxalate as Chemiresistive and Colorimetric Dual-Mode Sensors for the Detection of Hydrogen Peroxide Vapor

Hydrogen peroxide (H₂O₂) is commonly used as an oxidizing, bleaching, or antiseptic agent. It is also hazardous at increased concentrations. It is therefore crucial to monitor the presence and concentration of H₂O₂, particularly in the vapor phase. However, it remains a challenge for many state-of-the-art chemical sensors (e.g., metal oxides) to detect hydrogen peroxide vapor (HPV) because of the interference of moisture in the form of humidity. Moisture, in the form of humidity, is guaranteed to be present in HPV to some extent. To meet this challenge, herein, we report a novel composite material based on poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) doped with ammonium titanyl oxalate (ATO). This material can be fabricated as a thin film on electrode substrates for use in chemiresistive sensing of HPV. The adsorbed H₂O₂ will react with ATO, causing a colorimetric response in the material body. Combining colorimetric and chemiresistive responses resulted in a more reliable dual-function sensing method that improved the selectivity and sensitivity. Moreover, the composite film of PEDOT:PSS-ATO could be coated with a layer of pure PEDOT via in situ electrochemical synthesis. The pure PEDOT layer was hydrophobic, shielding the sensor material underneath from coming into contact with moisture. This was shown to mitigate the interference of humidity when detecting H₂O₂. A combination of these material properties makes the double-layer composite film, namely PEDOT:PSS-ATO/PEDOT, an ideal sensor platform for the detection of HPV. For example, upon a 9 min exposure to HPV at a concentration of 1.9 ppm, the electrical resistance of the film increased threefold, surpassing the bounds of the safety threshold. Meanwhile, the colorimetric response observed was 2.55 (defined as the color change ratio), a ratio at which the color change could be easily seen by the naked eye and quantified. We expect that this reported dual-mode sensor will find extensive practical applications in the fields of health and security with real-time, onsite monitoring of HPV.