Gold Nanoparticles Capped with a Novel Titanium(IV)-Containing Polyoxomolybdate Cluster: Selective and Enhanced Bactericidal Effect Against Escherichia coli

Bacterial infections are a public health threat of increasing concern in medical care systems; hence, the search for novel strategies to lower the use of antibiotics and their harmful effects becomes imperative. Herein, the antimicrobial performance of four polyoxometalate (POM)-stabilized gold nanoparticles (Au@POM) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as Gram-negative and Gram-positive bacteria models, respectively, is studied. The bactericidal studies performed, both in planktonic and sessile forms, evidence the antimicrobial potential of these hybrid nanostructures with selectivity toward Gram-negative species. In particular, the Au@GeMoTi composite with the novel [Ti2 (HGeMo7 O28 )2 ]10- POM capping ligand exhibits outstanding bactericidal efficiency with a minimum inhibitory concentration of just 3.12 µm for the E. coli strain, thus outperforming the other three Au@POM counterparts. GeMoTi represents the fourth example of a water-soluble TiIV -containing polyoxomolybdate, and among them, the first sandwich-type structure having heteroatoms in high-oxidation state. The evaluation of the bactericidal mechanisms of action points to the cell membrane hyperpolarization, disruption, and subsequent nucleotide leakage and the low cytotoxicity exerted on five different cell lines at antimicrobial doses demonstrates the antibiotic-like character. These studies highlight the successful design and development of a new POM-based nanomaterial able to eradicate Gram-negative bacteria without damaging mammalian cells.

X-ray Photoelectron Spectroscopy (XPS) Analysis of Nitrogen Environment in Small Extracellular Vesicle Membranes: A Potential Novel Technique with Application for Cancer Screening

Small extracellular vesicle (EV) membranes display characteristic protein-lipidic composition features that are related to their cell of origin, providing valuable clues regarding their parental cell composition and real-time state. This could be especially interesting in the case of cancer cell-derived EVs, as their membranes could serve as valuable tools in liquid biopsy applications and to detect changes in the tumor malignancy. X-Ray Photoelectron Spectroscopy (XPS) is a powerful surface analysis technique able to detect every chemical element present, being also sensitive to their chemical environment. Here we explore the use of XPS as a fast technique to characterize EV membrane composition, with possible application in cancer research. Notably, we have focused on the nitrogen environment as an indicator of the relative abundance of pyridine-type bonding, primary, secondary and tertiary amines. Specifically, we have analyzed how tumoral and healthy cells have different nitrogen chemical environments that can indicate the presence or absence of malignancy. In addition, a collection of human serum samples from cancer patients and healthy donors was also analyzed. The differential XPS analysis of EVs collected from patients confirmed that the patterns of amine evolution could be related to markers of cancer disease, opening the possibility of their use as a non-invasive blood biomarker.

Chitosan Derivatives as Nanocarriers for hLDHA Inhibitors Delivery to Hepatic Cells: A Selective Strategy for Targeting Primary Hyperoxaluria Diseases

Primary hyperoxalurias (PHs) are a group of inherited alterations of the hepatic glyoxylate metabolism that result in an excess of oxalate production by the oxidation of glyoxylate by the human lactate dehydrogenase A enzyme (hLDHA). The selective liver inhibition of this enzyme is one of the therapeutic strategies followed in the treatment of this disease. Even though several efforts have been recently performed using gene silencing by the RNA interference approach, small-molecule inhibitors that selectively reach hepatocytes are preferred since they present the advantages of a lower production cost and better pharmacological properties. In that sense, the design, synthesis, and physicochemical characterization by NMR, FTIR, DLS and TEM of two nanocarriers based on chitosan conjugates (1, non-redox-sensitive; 2, redox-sensitive) have been performed to (i) achieve the selective transport of hLDHA inhibitors into hepatocytes and (ii) their disruption once they reach the hepatocytes cytosol. Polymer 2 self-assembled into micelles in water and showed high drug loadings (19.8-24.5%) and encapsulation efficiencies (31.9-40.8%) for the hLDHA inhibitors (I-III) tested. The non-redox-sensitive micelle 1 remained stable under different glutathione (GSH) concentrations (10 μM and 10 mM), and just a residual release of the inhibitor encapsulated was observed (less than 10%). On the other hand, micelle 2 was sufficiently stable under in vitro physiological conditions (10 μM, GSH) but it quickly disassembled under the simulated reducing conditions present inside hepatocytes (10 mM GSH), achieving a 60% release of the hLDHA inhibitor encapsulated after 24 h, confirming the responsiveness of the developed carrier to the high levels of intracellular GSH.

Microfluidic Synthesis of Block Copolymer Micelles: Application as Drug nanocarriers and as Photothermal Transductors When Loading Pd Nanosheets

The synthesis of polymeric nanoparticles from a block copolymer based on poly(ethylene glycol) and a polymethacrylate containing the nucleobase analogue 2,6-diacylaminopyridine has been optimized by microfluidics to obtain homogeneous spherical micelles. Loading and delivery properties have been studied using naproxen as a model. The incorporation of a Pd precursor in the polymer organic solution fed into the micromixer allows the preparation of Pd(II) precursor-polymer hybrid systems, and the subsequent reduction with CO lead to the in-situ synthesis of Pd nanosheets inside of the hydrophobic core of the polymeric micelles. This methodology is highly efficient to yield all polymeric nanoparticles loaded with Pd nanosheets as detected by electron microscopy and energy-dispersive X-ray spectroscopy. The cell viability of these Pd nanosheets-containing polymeric nanoparticles has been evaluated using five cell lines, showing a high cytocompatibility at the tested concentrations without detrimental effects in cell membrane and nuclei. Furthermore, the use of these hybrid polymeric nanoparticles as photothermal transductors has been evaluated using NIR as irradiation source, as well as its application in photothermal therapy using different cell lines demonstrating a high efficiency in all cell cultures. This article is protected by copyright. All rights reserved.

Decoration of Squalenoyl-Gemcitabine Nanoparticles with Squalenyl-Hydroxybisphosphonate for the Treatment of Bone Tumors

Therapeutic perspectives of bone tumors such as osteosarcoma remain restricted due to the inefficacy of current treatments. We propose here the construction of a novel anticancer squalene‐based nanomedicine with bone affinity and retention capacity. A squalenyl‐hydroxybisphosphonate molecule was synthetized by chemical conjugation of a 1‐hydroxyl‐1,1‐bisphosphonate moiety to the squalene chain. This amphiphilic compound was inserted onto squalenoyl‐gemcitabine nanoparticles using the nanoprecipitation method. The co‐assembly led to nanoconstructs of 75 nm, with different morphology and colloidal properties. The presence of squalenyl‐hydroxybisphosphonate enhanced the nanoparticles binding affinity for hydroxyapatite, a mineral present in the bone. Moreover, the in vitro anticancer activity was preserved when tested in commercial and patient‐treated derived pediatric osteosarcoma cells. Further in vivo studies will shed light on the potential of these nanomedicines for the treatment of bone sarcomas.

A minimally-masked inactive prodrug of panobinostat that is bioorthogonally activated by gold chemistry

The recent incorporation of Au chemistry in the bioorthogonal toolbox has opened up new opportunities to deliver biologically independent reactions in living environments. Herein we report that the O-propargylation of the hydroxamate group of the potent HDAC inhibitor panobinostat leads to a vast reduction of its anticancer properties (>500-fold). We also show that this novel prodrug is converted back into panobinostat in the presence of Au catalysts in vitro and in cell culture.

Microfluidics for the rapid and controlled preparation of organic nanotubes of bent-core based dendrimers

Recently, bent-core molecules have emerged as excellent building blocks for the obtaining of nanostructures in solvents. Herein, we report the use of a coaxial microfluidic system as a promising tool to control the self-assembly of non-conventional bent-core amphiphiles. Moreover, a TEM study to comprehend the hierarchical self-assembly process in solution was carried out. The proposed tool provides both a cost-effective platform to save hard-to-synthesise reagents and a rapid method to screen a plethora of different parameters, i.e., THF/water ratio, residence time, concentration of the amphiphile, temperature and pH. The experiments allowed to test for the first time the suitability of microfluidics for the self-assembly of bent-core molecules, as well as the study of a range of conditions to control the assembly of different nanostructures in a rapid and controlled manner. Additionally, organic nanostructures were combined with gold nanoparticles to prepare nanocomposites with enhanced properties. Both organic and hybrid nanostructures were also obtained in the solid state. These results may inspire scientists working on supramolecular chemistry and bent-core molecules expanding the scope of microfluidic systems for the self-assembly of other low-molecular-weight compounds.

Supramolecular Functionalizable Linear-Dendritic Block Copolymers for the Preparation of Nanocarriers by Microfluidics

Hybrid linear-dendritic block copolymers (LDBCs) having dendrons with a precise number of peripheral groups that are able to supramolecular bind functional moieties are challenging materials as versatile polymeric platforms for the preparation of functional polymeric nanocarriers. PEG2k-b-dxDAP LDBCs that are based on polyethylene glycol (PEG) as hydrophilic blocks and dendrons derived from bis-MPA having 2,6-diacylaminopyridine (DAP) units have been efficiently synthesized by the click coupling of preformed blocks, as was demonstrated by spectroscopic techniques and mass spectrometry. Self-assembly ability was first checked by nanoprecipitation. A reproducible and fast synthesis of aggregates was accomplished by microfluidics optimizing the total flow rate and phase ratio to achieve spherical micelles and/or vesicles depending on dendron generation and experimental parameters. The morphology and size of the self-assemblies were studied by TEM, Cryogenic Transmission Electron Microscopy (cryo-TEM), and Dynamic Light Scattering (DLS). The cytotoxicity of aggregates synthesized by microfluidics and the influence on apoptosis and cell cycle evaluation was studied on four cell lines. The self-assemblies are not cytotoxic at doses below 0.4 mg mL-1. Supramolecular functionalization using thymine derivatives was explored for reversibly cross-linking the hydrophobic blocks. The results open new possibilities for their use as drug nanocarriers with a dynamic cross-linking to improve nanocarrier stability but without hindering disassembly to release molecular cargoes.

Covalent Cross-Linking of 2H-MoS2 Nanosheets

The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS₂ -MoS₂ homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS₂ sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials.

The extent of protein hydration dictates the preference for heterogeneous or homogeneous nucleation generating either parallel or antiparallel β-sheet α-synuclein aggregates

α-Synuclein amyloid self-assembly is the hallmark of a number of neurodegenerative disorders, including Parkinson's disease, although there is still very limited understanding about the factors and mechanisms that trigger this process. Primary nucleation has been observed to be initiated in vitro at hydrophobic/hydrophilic interfaces by heterogeneous nucleation generating parallel β-sheet aggregates, although no such interfaces have yet been identified in vivo. In this work, we have discovered that α-synuclein can self-assemble into amyloid aggregates by homogeneous nucleation, without the need of an active surface, and with a preference for an antiparallel β-sheet arrangement. This particular structure has been previously proposed to be distinctive of stable toxic oligomers and we here demonstrate that it indeed represents the most stable structure of the preferred amyloid pathway triggered by homogeneous nucleation under limited hydration conditions, including those encountered inside α-synuclein droplets generated by liquid-liquid phase separation. In addition, our results highlight the key role that water plays not only in modulating the transition free energy of amyloid nucleation, and thus governing the initiation of the process, but also in dictating the type of preferred primary nucleation and the type of amyloid polymorph generated depending on the extent of protein hydration. These findings are particularly relevant in the context of in vivo α-synuclein aggregation where the protein can encounter a variety of hydration conditions in different cellular microenvironments, including the vicinity of lipid membranes or the interior of membraneless compartments, which could lead to the formation of remarkably different amyloid polymorphs by either heterogeneous or homogeneous nucleation.

Isolation of exosomes from whole blood by a new microfluidic device: proof of concept application in the diagnosis and monitoring of pancreatic cancer

Background

Exosomes are endocytic-extracellular vesicles with a diameter around 100 nm that play an essential role on the communication between cells. In fact, they have been proposed as candidates for the diagnosis and the monitoring of different pathologies (such as Parkinson, Alzheimer, diabetes, cardiac damage, infection diseases or cancer).

Results

In this study, magnetic nanoparticles (Fe₃O₄NPs) were successfully functionalized with an exosome-binding antibody (anti-CD9) to mediate the magnetic capture in a microdevice. This was carried out under flow in a 1.6 mm (outer diameter) microchannel whose wall was in contact with a set of NdFeB permanent magnets, giving a high magnetic field across the channel diameter that allowed exosome separation with a high yield. To show the usefulness of the method, the direct capture of exosomes from whole blood of patients with pancreatic cancer (PC) was performed, as a proof of concept. The captured exosomes were then subjected to analysis of CA19-9, a protein often used to monitor PC patients.

Conclusions

Here, we describe a new microfluidic device and the procedure for the isolation of exosomes from whole blood, without any need of previous isolation steps, thereby facilitating translation to the clinic. The results show that, for the cases analyzed, the evaluation of CA19-9 in exosomes was highly sensitive, compared to serum samples.

Bioorthogonal Uncaging of Cytotoxic Paclitaxel through Pd Nanosheet-Hydrogel Frameworks

The promising potential of bioorthogonal catalysis in biomedicine is inspiring incremental efforts to design strategies that regulate drug activity in living systems. To achieve this, it is not only essential to develop customized inactive prodrugs and biocompatible metal catalysts but also the right physical environment for them to interact and enable drug production under spatial and/or temporal control. Toward this goal, here, we report the first inactive precursor of the potent broad-spectrum anticancer drug paclitaxel (a.k.a. Taxol) that is stable in cell culture and labile to Pd catalysts. This new prodrug is effectively uncaged in cancer cell culture by Pd nanosheets captured within agarose and alginate hydrogels, providing a biodegradable catalytic framework to achieve controlled release of one of the most important chemotherapy drugs in medical practice. The compatibility of bioorthogonal catalysis and physical hydrogels opens up new opportunities to administer and modulate the mobility of transition metal catalysts in living environs.

Photocatalytic and antimicrobial multifunctional nanocomposite membranes for emerging pollutants water treatment applications

Emerging pollutants represent a new global problem for water quality. As these compounds get into the environment, they cause severe threats to aquatic environments and human health and are typically resistant to conventional wastewater treatments. In this work, TiO₂ nanoparticles surface was functionalized with silver (Ag) nanoparticles, and solvent cast and electrospun membranes of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) were prepared with different concentrations of TiO₂ and Ag-TiO₂ to produce a multifunctional material. The photocatalytic activity of the nanocomposites was evaluated through the degradation of norfloxacin under ultraviolet (UV) and visible radiation. It is shown that nanocomposites with Ag-TiO₂ show the highest degradation efficiencies: 64.2% under UV and 80.7% under visible radiation, for 90 and 300 min, respectively. Furthermore, the recyclability of the membranes has also been demonstrated. Finally, it is shown the antimicrobial activity of the nanocomposite membranes, demonstrating the suitability of the Ag-TiO₂/PVDF-HFP nanocomposites as multifunctional photocatalytic and antimicrobial membranes for water remediation applications.

Controlled Covalent Functionalization of 2 H-MoS2 with Molecular or Polymeric Adlayers

Most air-stable 2D materials are relatively inert, which makes their chemical modification difficult. In particular, in the case of MoS₂ , the semiconducting 2 H-MoS₂ is much less reactive than its metallic counterpart, 1T-MoS₂ . As a consequence, there are hardly any reliable methods for the covalent modification of 2 H-MoS₂ . An ideal method for the chemical functionalization of such materials should be both mild, not requiring the introduction of a large number of defects, and versatile, allowing for the decoration with as many different functional groups as possible. Herein, a comprehensive study on the covalent functionalization of 2 H-MoS₂ with maleimides is presented. The use of a base (Et₃ N) leads to the in situ formation of a succinimide polymer layer, covalently connected to MoS₂ . In contrast, in the absence of base, functionalization stops at the molecular level. Moreover, the functionalization protocol is mild (occurs at room temperature), fast (nearly complete in 1 h), and very flexible (11 different solvents and 10 different maleimides tested). In practical terms, the procedures described here allow for the chemist to manipulate 2 H-MoS₂ in a very flexible way, decorating it with polymers or molecules, and with a wide range of functional groups for subsequent modification. Conceptually, the spurious formation of an organic polymer might be general to other methods of functionalization of 2D materials, where a large excess of molecular reagents is typically used.

Gas-Directed Production of Noble Metal-Magnetic Heteronanostructures in Continuous Fashion: Application in Catalysis

Complex nanomaterials produced by scale-up batch processes lack suitable control of shape, size distribution, chemical composition, and quality, because heat and mass transfer are seriously affected as the reactor volume increases. Here we use a novel continuous synthesis procedure, the active gas-liquid segmented flow, to produce noble metal-magnetic heteronanostructures with enormous interest in the fields of catalysis, biomedicine, environmental sensors, food monitoring, and chemical analysis. The microreactor technology proposed scales down the reaction volume to gain advantage of the large surface area to volume ratio with respect to conventional batch-type reactors, improving heat and mass transport and, consequently, promoting a uniform heating and mixing. The gas phase was introduced in the chemical reactor as gas slugs of nanoliter scale with a dual role: (1) passive mixing and (2) chemical directing agent to tune the crystallization of nanostructures in a continuous fashion. The shape, size, and magnetic properties of the resulting heteronanostructures, as well as the density, size, and composition of noble metal nanoparticles were tuned to show the versatility of the proposed approach in a timeline of 4 min. We demonstrated that the produced nanostructures provide excellent catalytic properties in the catalyzed hydrogenation of nitrophenols to aminophenols. Electron microscopy, UV-vis spectroscopy, and cyclic voltammetry studies showed the remarkable catalytic performance of the produced heteronanostructures.

Efficient encapsulation of theranostic nanoparticles in cell-derived exosomes: leveraging the exosomal biogenesis pathway to obtain hollow gold nanoparticle-hybrids

Exosomes can be considered natural targeted delivery systems able to carry exogenous payloads, drugs or theranostic nanoparticles (NPs). This work aims to combine the therapeutic capabilities of hollow gold nanoparticles (HGNs) with the unique tumor targeting properties provided by exosomes. Here, we tested different methods to encapsulate HGNs (capable of absorbing light in the NIR region for selective thermal ablation) into murine melanoma cells derived exosomes (B16-F10-exos), including electroporation, passive loading by diffusion, thermal shock, sonication and saponin-assisted loading. These methods gave less than satisfactory results: although internalization of relatively large NPs into B16-F10-exos was achieved by almost all the physicochemical methods tested, only about 15% of the exosomes were loaded with NPs and several of those processes had a negative effect regarding the morphology and integrity of the loaded exosomes. In a different approach, B16-F10 cells were pre-incubated with PEGylated HGNs (PEG-HGNs) in an attempt to incorporate the NPs into the exosomal biogenesis pathway. The results were highly successful: exosomes recovered from the supernatant of the cell culture showed up to 50% of HGNs internalization. The obtained hybrid HGN-exosome vectors were characterized with a battery of techniques to make sure that internalization of HGNs did not affect exosome characteristics compared with other strategies. PEG-HGNs were released through the endosomal-exosome biogenesis pathway confirming that the isolated vesicles were exosomes.

The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

Titanium dioxide (TiO₂) nanoparticles have recently appeared in PET waste because of the introduction of opaque PET bottles. We prepare polymer blend nanocomposites (PBNANOs) by adding hydrophilic (hphi), hydrophobic (hpho), and hydrophobically modified (hphoM) titanium dioxide (TiO₂) nanoparticles to 80rPP/20rPET recycled blends. Contact angle measurements show that the degree of hydrophilicity of TiO₂ decreases in the order hphi > hpho > hphoM. A reduction of rPET droplet size occurs with the addition of TiO₂ nanoparticles. The hydrophilic/hydrophobic balance controls the nanoparticles location. Transmission electron microscopy (TEM_ shows that hphi TiO₂ preferentially locates inside the PET droplets and hpho at both the interface and PP matrix. HphoM also locates within the PP matrix and at the interface, but large loadings (12%) can completely cover the surfaces of the droplets forming a physical barrier that avoids coalescence, leading to the formation of smaller droplets. A good correlation is found between the crystallization rate of PET (determined by DSC) and nanoparticles location, where hphi TiO₂ induces the highest PET crystallization rate. PET lamellar morphology (revealed by TEM) is also dependent on particle location. The mechanical behavior improves in the elastic regime with TiO₂ addition, but the plastic deformation of the material is limited and strongly depends on the type of TiO₂ employed.

A unique multidrug nanomedicine made of squalenoyl-gemcitabine and alkyl-lysophospholipid edelfosine

Among anticancer nanomedicines, squalenoyl nanocomposites have obtained encouraging outcomes in a great variety of tumors. The prodrug squalenoyl-gemcitabine has been chosen in this study to construct a novel multidrug nanosystem in combination with edelfosine, an alkyl-lysophopholipid with proven anticancer activity. Given their amphiphilic nature, it was hypothesized that both anticancer compounds, with complementary molecular targets, could lead to the formation of a new multitherapy nanomedicine. Nanoassemblies were formulated by the nanoprecipitation method and characterized by dynamic light scattering, transmission electron microscopy and X-ray photoelectron spectroscopy. Because free edelfosine is highly hemolytic, hemolysis experiments were performed using human blood erythrocytes and nanoassemblies efficacy was evaluated in a patient-derived metastatic pediatric osteosarcoma cell line. It was observed that these molecules spontaneously self-assembled as stable and monodisperse nanoassemblies of 51 ± 1 nm in a surfactant/polymer free-aqueous suspension. Compared to squalenoyl-gemcitabine nanoassemblies, the combination of squalenoyl-gemcitabine with edelfosine resulted in smaller particle size and a new supramolecular conformation, with higher stability and drug content, and ameliorated antitumor profile.

Gold-decorated magnetic nanoparticles design for hyperthermia applications and as a potential platform for their surface-functionalization

The integration of noble metal and magnetic nanoparticles with controlled structures that can couple various specific effects to the different nanocomposite in multifunctional nanosystems have been found interesting in the field of medicine. In this work, we show synthesis route to prepare small Au nanoparticles of sizes  = 3.9 ± 0.2 nm attached to Fe3O4 nanoparticle cores ( = 49.2 ± 3.5 nm) in aqueous medium for potential application as a nano-heater. Remarkably, the resulted Au decorated PEI-Fe3O4 (Au@PEI-Fe3O4) nanoparticles are able to retain bulk magnetic moment MS = 82-84 Am2/kgFe3O4, with the Verwey transition observed at TV = 98 K. In addition, the in vitro cytotoxicity analysis of the nanosystem microglial BV2 cells showed high viability (>97.5%) to concentrate up to 100 µg/mL in comparison to the control samples. In vitro heating experiments on microglial BV2 cells under an ac magnetic field (H0 = 23.87 kA/m; f = 571 kHz) yielded specific power absorption (SPA) values of SPA = 43 ± 3 and 49 ± 1 μW/cell for PEI-Fe3O4 and Au@PEI-Fe3O4 NPs, respectively. These similar intracellular SPA values imply that functionalization of the magnetic particles with Au did not change the heating efficiency, providing at the same time a more flexible platform for multifunctional functionalization.

Exosome origin determines cell targeting and the transfer of therapeutic nanoparticles towards target cells

BACKGROUND

Exosomes are considered key elements for communication between cells, but very little is known about the mechanisms and selectivity of the transference processes involving exosomes released from different cells.

RESULTS

In this study we have investigated the transfer of hollow gold nanoparticles (HGNs) between different cells when these HGNs were loaded within exosomes secreted by human placental mesenchymal stem cells (MSCs). These HGNs were successfully incorporated in the MSCs exosome biogenesis pathway and released as HGNs-loaded exosomes. Time-lapse microscopy and atomic emission spectroscopy allowed us to demonstrate the selective transfer of the secreted exosomes only to the cell type of origin when studying different cell types including cancer, metastatic, stem or immunological cells.

CONCLUSIONS

In this study we demonstrate the selectivity of in vitro exosomal transfer between certain cell types and how this phenomenon can be exploited to develop new specific vectors for advanced therapies. Specifically, we show how this preferential uptake can be leveraged to selectively induce cell death by light-induced hyperthermia only in cells of the same type as those producing the corresponding loaded exosomes. We describe how the exosomes are preferentially transferred to some cell types but not to others, thus providing a better understanding to design selective therapies for different diseases.

High-Precision Photothermal Ablation Using Biocompatible Palladium Nanoparticles and Laser Scanning Microscopy

Herein, we report a straightforward method for the scalable preparation of Pd nanoparticles (Pd-NPs) with reduced inherent cytotoxicity and high photothermal conversion capacity. These Pd-NPs are rapidly taken up by cells and able to kill labeled cancer cells upon short exposure to near-infrared (NIR) light. Following cell treatment with Pd-NPs, ablated areas were patterned with high precision by laser scanning microscopy, allowing one to perform cell migration assays with unprecedented accuracy. Using coherent Raman microscopy, cells containing Pd-NPs were simultaneously ablated and imaged. This novel methodology was combined with intravital imaging to mediate microablation of cancerous tissue in tumor xenografts in mice.

Effect of the Operating Conditions on the Growth of Carbonaceous Nanomaterials over Stainless Steel Foams. Kinetic and Characterization Studies

This work is an advance on the development of structured catalytic reactors. Here, we present the results of the effect of the main operational variables (reaction temperature, % H2 and % C2H6) on the kinetics of carbonaceous nanomaterials (CNMs) formation by catalytic decomposition of ethane over stainless steel foams. Some of the main drawback problems that occur during the operation of chemical structured reactors are related to the preparation of long term stable coatings. The washcoating is the most used technique to deposit the catalytic layer over the substrate. The application of this procedure is quite complex in the case of geometries such as foams or cloths. In the case of the deposition of layers of carbonaceous nanomaterials, an alternative route, avoiding the washcoating, is their direct growth by catalytic decomposition of light hydrocarbons over the surface of the metallic substrate. In the case of structured steel foams, the substrate already contains the catalytic active phases for this reaction, like Fe and Ni, among of the minor components (Cr, Mn, Mo) that can act as promotors/stabilizers.

The nanomaterials obtained after reaction were characterized by Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The characterization results indicate that there is a maximum, obtained at ca. 900 °C, 33.3 % of C2H6 and 1.7 % of H2, in the quality of the carbonaceous nanomaterials grown. Under these conditions, the CNMs consist mainly of few layer graphene (FLG) and graphite nanolayers (GNL) encapsulating the metallic nanoparticles. In addition, the kinetic results indicate the existence of another optimum, at ca. 800 °C, 33.3 % of C2H6 and 1.7 % of H2, in the productivity to the carbonaceous nanomaterials. The existence of these optimums is due to the driving force for the diffusion of the carbon atoms through the Fe-Ni nanoparticles (NPs) obtained at high temperatures (e. g. above 800 °C) caused by the competence between two opposite phenomena: the increase of the rate of carbon diffusion through the metallic nanoparticles of Fe-Ni and the deactivation of these nanoparticles. The deactivation is the consequence of the encapsulation and reconstruction of the nanoparticles during the formation of the several types of CNMs. The evolution of the carbon mass during the reaction time was analyzed using a phenomenological kinetic model that takes into account the main stages involved during the formation of carbonaceous nanomaterials: hydrocarbon decomposition, carburization, diffusion, precipitation and deactivation. The results obtained from the kinetic model, along with the characterization results, enable quantify the influence of the operating variables on each stage of the carbonaceous nanomaterial formation and therefore open the way to optimize the process.

Gold-Triggered Uncaging Chemistry in Living Systems

Recent advances in bioorthogonal catalysis are increasing the capacity of researchers to manipulate the fate of molecules in complex biological systems. A bioorthogonal uncaging strategy is presented, which is triggered by heterogeneous gold catalysis and facilitates the activation of a structurally diverse range of therapeutics in cancer cell culture. Furthermore, this solid-supported catalytic system enabled locally controlled release of a fluorescent dye into the brain of a zebrafish for the first time, offering a novel way to modulate the activity of bioorthogonal reagents in the most fragile and complex organs.

Bactericidal Effect of Gold-Chitosan Nanocomposites in Coculture Models of Pathogenic Bacteria and Human Macrophages

The ability of pathogenic bacteria to develop resistance mechanisms to avoid the antimicrobial potential of antibiotics has become an increasing problem for the healthcare system. The search for more effective and selective antimicrobial materials, though not harmful to mammalian cells, seems imperative. Herein we propose the use of gold-chitosan nanocomposites as effective bactericidal materials avoiding damage to human cells. Nanocomposites were obtained by taking advantage of the reductive and stabilizing action of chitosan solutions on two different gold precursor concentrations. The resulting nanocomposites were added at different final concentrations to a coculture model formed by Gram-positive (Staphylococcus aureus) or Gram-negative (Escherichia coli) bacteria and human macrophages. Gold-chitosan colloids exhibited superior bactericidal ability against both bacterial models without showing cytotoxicity on human cells at the concentrations tested. Morphological and in vitro viability studies supported the feasibility of the infection model here described to test novel bactericidal nanomaterials. Flow cytometry and scanning electron microscopy analyses pointed to the disruption of the bacterial wall as the lethal mechanism. Data obtained in the present study suggest that gold-chitosan nanocomposites are powerful and promising nanomaterials for reducing bacteria-associated infections, respecting the integrity of mammalian cells, and displaying high selectivity against the studied bacteria.

Development and characterization of polo-like kinase 2 loaded nanoparticles-A novel strategy for (serine-129) phosphorylation of alpha-synuclein

Polo like kinase 2 (PLK2), a serine/threonine serum inducible kinase, has been proposed to be the major factor responsible for phosphorylating alpha-synuclein (α-syn) at Serine-129 (Ser-129) in Parkinson's disease (PD). A suitable strategy to gain insights into PLK2's biological effects might be to increase PLK2 intracellular levels with the aim of reproducing the slow progressive neuronal changes that occur in PD. The goal of this study was to develop and characterize a novel drug delivery system (DDS) for PLK2 cytosolic delivery using Total recirculating one machine system (TROMS), a technique capable of encapsulating fragile molecules while maintaining their native properties. A protocol for nanoparticle (NP) preparation using TROMS was set up. NPs showed a mean diameter of 257±15.61nm and zeta potential of -16±2mV, suitable for cell internalization. TEM and SEM images showed individual, spherical, dispersed NPs. The drug entrapment efficacy was 61.86±3.9%. PLK2-NPs were able to enter SH-SY5Y cells and phosphorylate α-syn at Ser-129, demonstrating that the enzyme retained its activity after the NP manufacturing process. This is the first study to develop a DDS for continuous intracellular delivery of PLK2. These promising results indicate that this novel nanotechnology approach could be used to elucidate the biological effects of PLK2 on dopaminergic neurons.

On the molecular mechanisms for the H2/CO2 separation performance of zeolite imidazolate framework two-layered membranes

Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption.

Nanoengineering a library of metallic nanostructures using a single microfluidic reactor

Microfluidic synthesis in a microfabricated reactor enables fast and facile synthesis of a wide library of metallic nanostructures: monometallic, bimetallic, anisotropic growth and heterostructures. Specific nanostructures are realized by selection of flow pattern and synthesis parameters. The technique is shown to have advantages over conventional batch technologies. Not only does it allow faster scalable synthesis, but also realization of nanostructures hitherto not reported such as Pt-Ru, Pt-Ni and Pt-Co nanodendrites, Pt-Pd heterostructures, Ag-Pd core-shell NPs, Au-Pd nanodumbbells and Au-Pd nanosheets.

Clinical advances of nanocarrier-based cancer therapy and diagnostics

INTRODUCTION

Cancer is a leading cause of death worldwide and efficient new strategies are urgently needed to combat its high mortality and morbidity statistics. Fortunately, over the years, nanotechnology has evolved as a frontrunner in the areas of imaging, diagnostics and therapy, giving the possibility of monitoring, evaluating and individualizing cancer treatments in real-time. Areas covered: Polymer-based nanocarriers have been extensively studied to maximize cancer treatment efficacy and minimize the adverse effects of standard therapeutics. Regarding diagnosis, nanomaterials like quantum dots, iron oxide nanoparticles or gold nanoparticles have been developed to provide rapid, sensitive detection of cancer and, therefore, facilitate early treatment and monitoring of the disease. Therefore, multifunctional nanosystems with both imaging and therapy functionalities bring us a step closer to delivering precision/personalized medicine in the cancer setting. Expert opinion: There are multiple barriers for these new nanosystems to enter the clinic, but it is expected that in the near future, nanocarriers, together with new 'targeted drugs', could replace our current treatments and cancer could become a nonfatal disease with good recovery rates. Joint efforts between scientists, clinicians, the pharmaceutical industry and legislative bodies are needed to bring to fruition the application of nanosystems in the clinical management of cancer.

High-speed water sterilization using silver-containing cellulose membranes

The removal of bacteria and other pathogenic micro-organisms from drinking water is usually carried out by boiling; however, when this is not a feasible option, a combination of treatment based on filtration and disinfection is recommended. In this work, we produced cellulose filters grafted with silver nanoparticles (AgNPs) and silver nanowires (AgNWs) by covalent attachment of separately prepared Ag nanostructures on thiol- and amine-modified commercially available cellulosic filters. Results obtained from scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), and energy-dispersive X-ray spectroscopy (EDS) all revealed that such modified cellulose membranes contained large amounts of homogeneously dispersed AgNPs, whereas X-ray photoelectron spectroscopy (XPS) analysis demonstrated that the aforementioned nanostructures were immobilized on the membrane with a strong and stable covalent bond between the thiol or amine groups and the surface of the Ag nanofillers. This durable and robust covalent attachment facilitated outstanding suppression of the uncontrolled release of the nanostructures from the membranes, even under strong ultrasonication. Those membranes also demonstrated high permeance and antimicrobial activity in excess of 99.9% growth inhibition against Escherichia coli, which was used as a model of gram-negative coliform bacteria. Bacteria percolated throughout the tortuous silver-loaded filters, thus increasing the chances of contact between the Ag nanostructures (wires or nanoparticles) and the passing bacteria. Thus, we anticipate that these filters, with their high antibacterial activity and robustness, can be produced in a cost-effective manner and that they would be capable of producing affordable, clean, and safe drinking water in a short period of time without producing an uncontrolled silver release into the percolated water.

Accelerating the controlled synthesis of metal-organic frameworks by a microfluidic approach: a nanoliter continuous reactor

Segmented microfluidics was applied to the ultrafast crystallization of dicarboxylate based MIL-88B type metal-organic frameworks (MOFs; Fe-MIL-88B-NH2, Fe-MIL-88B, and Fe-MIL-88B-Br). Particular attention was paid to the influence of the temperature, residence time, and slug volume on the size and crystal size distribution of the MOFs. Average sizes in the 90-900 nm range with relatively narrow crystal size distributions were obtained with residence times as short as 20 s depending on the MOF type and synthesis conditions.

One-step continuous synthesis of biocompatible gold nanorods for optical coherence tomography

We present a novel one-step flow process to synthesize biocompatible gold nanorods with tunable absorption and biocompatible surface ligands. Photothermal optical coherence tomography (OCT) of human breast tissue is successfully demonstrated using tailored gold nanorods designed to have strong absorption in the near-infrared range.

L- and D-proline adsorption by chiral ordered mesoporous silica

Chiral ordered mesoporous silica (COMS) was synthesized in the presence of amino acid proline by combining tetraethyl orthosilicate and quaternized aminosilane silica sources. The as-prepared materials were activated by calcination or microwave chemical extraction to remove the organic templates. The powder X-ray diffraction and N2 adsorption characterization revealed in COMS the structural and textural features of MCM-41-type silica. The chirality of the material was disclosed by mixed and separate L- and D-proline adsorption on the COMS prepared with L-proline (L-Pro-COMS) and D-proline (d-Pro-COMS). It was found that the maximum L-proline and D-proline adsorption capacities on L-Pro-COMS were ca. 2.3 and 0.6 mmol/g, respectively, while the adsorption of D-proline was higher than that of l-proline on d-Pro-COMS. Finally, both activation routes yielded enantioselective silicas able to separate proline racemate.

A new titanosilicate umbite membrane for the separation of H2

A new microporous titanosilicate umbite membrane has been synthesized on commercial porous TiO2 tubular supports. This membrane is able to separate H2/N2 mixtures (with selectivities as high as 48) even in the presence of water.