Improved catalytic activity and stability using mixed sulfonic acid- and hydroxy-bearing polymer brushes in microreactors

Surface Functionalization with Polymer Brushes via Surface-Initiated Atom Transfer Radical Polymerization: Synthesis, Applications, and Current Challenges

Polymer brushes have received great attention in recent years due to their distinctive properties and wide range of applications. The synthesis of polymer brushes typically employs surface-initiated atom transfer radical polymerization (SI-ATRP) techniques. To realize the control of the polymerization process in different environments, various SI-ATRP techniques triggered by different stimuli have been developed. This review focuses on the latest developments in different stimuli-triggered SI-ATRP methods, such as electrochemically mediated, photoinduced, enzyme-assisted, mechanically controlled, and organocatalyzed ATRP. Additionally, SI-ATRP technology triggered by a combination of multiple stimuli sources is also discussed. Furthermore, the applications of polymer brushes in lubrication, biological applications, antifouling, and catalysis are also systematically summarized and discussed. Despite the advancements in the synthesis of various types of 1D, 2D, and 3D polymer brushes via controlled radical polymerization, contemporary challenges remain in the quest for more efficient and straightforward synthetic protocols that allow for precise control over the composition, structure, and functionality of polymer brushes. We anticipate the readers could promote the understanding of surface functionalization based on ATRP-mediated polymer brushes and envision future directions for their application in surface coating technologies.

Scalable Air-Tolerant μL-Volume Synthesis of Thick Poly(SPMA) Brushes Using SI-ARGET-ATRP

We present a facile procedure for preparing thick (up to 300 nm) poly(3-sulfopropyl methacrylate) brushes using SI-ARGET-ATRP by conducting the reaction in a fluid film between the substrate and a coverslip. This method is advantageous in a number of ways: it does not require deoxygenation of the reaction solution, and the monomer conversion is much higher than usual since only a minimal amount of solution (microliters) is used, resulting in a tremendous reduction (∼50×) of wasted reagents. Moreover, this method is particularly suitable for grafting brushes to large substrates.

Investigation of the effect of microflow reactor diameter on condensation reactions in l-proline-immobilized polymer monoliths

Structure of porous monolith in a microflow reactor and the reactor diameter affect the residence time distribution (RTD). The effect of the RTD on the catalytic efficiency of the asymmetric aldol addition reaction was examined.

Probing polymer brushes with electrochemical impedance spectroscopy: a mini review

Polymer brushes are frequently used as surface-tethered antifouling layers in biosensors to improve sensor surface-analyte recognition in the presence of abundant non-target molecules in complex biological samples by suppressing nonspecific interactions. However, because brushes are complex systems highly responsive to changes in their surrounding environment, studying their properties remains a challenge. Electrochemical impedance spectroscopy (EIS) is an emerging method in this context. In this mini review, we aim to elucidate the potential of EIS for investigating the physicochemical properties and structural aspects of polymer brushes. The application of EIS in brush-based biosensors is also discussed. Most common principles employed in these biosensors are presented, as well as interpretation of EIS data obtained in such setups. Overall, we demonstrate that the EIS-polymer brush pairing has a considerable potential for providing new insights into brush functionalities and designing highly sensitive and specific biosensors.

Capillary-Bound Dense Micelle Brush Supports for Continuous Flow Catalysis

Flow reactors are appealing alternatives to conventional batch reactors for heterogeneous catalysis. However, it remains a key challenge to firmly immobilize the catalysts in a facile and flexible manner and to simultaneously maintain a high catalytic efficiency and throughput. Herein, we introduce a dense cylindrical micelle brush support in glass capillary flow reactors through a living crystallization-driven self-assembly process initiated by pre-immobilized short micelle seeds. The active hairy corona of these micellar brushes allows the flexible decoration of a diverse array of nanocatalysts, either through a direct capture process or an in situ growth method. The resulting flow reactors reveal excellent catalytic efficiency for a broad range of frequently utilized transformations, including organic reductions, Suzuki couplings, photolytic degradations, and multistep cascade reactions, and the system was both recyclable and durable. Significantly, this approach is readily applicable to long capillaries, which enables the construction of flow reactors with remarkably higher throughput.

Cucurbit[7]uril-based high-performance catalytic microreactors

Catalytic microreactors manufactured using microfluidic devices have received significant research interest in recent years. However, little attention has been paid to immobilising metallic nanoparticles (NPs) onto microchannel walls for high efficiency catalytic reactions. We demonstrate a facile preparation of cucurbit[7]uril-based catalytic microreactors, where metallic NPs are immobilised onto microchannels via supramolecular complexation with methyl viologen@cucurbit[7]uril (CB[7]). These microreactors exhibit a remarkable catalytic activity owing to the substantially high surface area to volume ratio of the microchannels and metallic NPs. Superior to most conventional heterogeneous catalytic reactions, separation post reaction and complicated recycling steps of the catalysts are not required. Moreover, CB[7] can complex a variety of metallic NPs to its portal, providing a multifunctional high-performance in situ catalytic platform.

Immobilization of catalytic virus-like particles in a flow reactor

A functional microfluidic reactor is constructed by the immobilization of gold containing virus-based protein cages that catalyze the reduction of nitro-arenes with high efficiency.

The guanidinium unit in the catalysis of phosphoryl transfer reactions: from molecular spacers to nanostructured supports

Examples of guanidinium-based artificial phosphodiesterases are illustrated in this review article. A wide set of collected catalytic systems are presented, from the early examples to the most recent developments of the use of this unit in the design of supramolecular catalysts. Special attention is dedicated to illustrate the operating catalytic mechanism and the role of guanidine/ium units in the catalysis. One or more of these units can act by themselves or in conjunction with other active units. The analogy with the mechanism of enzymatic systems is presented and discussed. In the last part of this overview, recent examples of guanidinophosphodiesterases based on nanostructured supports are reported, namely gold-monolayer-protected clusters and polymer brushes grafted to silica nanoparticles. The issue of the dependence of the catalytic performance on the preorganization of the spacer is tackled and discussed in terms of effective molarity, a parameter that can be taken as a quantitative measurement of this preorganization for both conventional molecular linker and nanosized supports.