Double metal ions synergistic effect in hierarchical multiple sulfide microflowers for enhanced supercapacitor performance

Ni0.5Co0.5S nano-chains: a high-performing intercalating pseudocapacitive electrode in asymmetric supercapacitor (ASC) mode for the development of large-scale energy storage devices

Grid-scale energy storage solutions are necessary for using renewable energy sources efficiently. A supercapattery (supercapacitor + battery) has recently been introduced as a new variety of hybrid devices that engage both capacitive and faradaic charge storage processes. Nano-chain architectures of Ni0.5Co0.5S electrode materials consisting of interconnected nano-spheres are rationally constructed by tailoring the surface structure. Nano-chains of the bimetallic sulfide Ni0.5Co0.5S are presented to have a superior charge storage capacity. The Ni0.5Co0.5S nano-chain electrode presents a capacitance of 2001.6 F g-1 at 1 mV s-1, with a specific capacity of 267 mA h g-1 (1920 F g-1) at 1 A g-1 in 4 M KOH aqueous electrolyte through the galvanostatic charge-discharge (GCD) method. The reason behind the high charge storage capacity of the materials is the predominant redox-mediated diffusion-controlled pseudocapacitive mechanism coupled with surface capacitance (electrosorption), as the surface (outer) and intercalative (inner) charges stored by the Ni0.5Co0.5S electrodes are close to 46.0% and 54.0%, respectively. Additionally, a Ni0.5Co0.5S//AC two electrode full cell operating in asymmetric supercapacitor cell (ASCs) mode in 4 M KOH electrolyte exhibits an impressive energy density equivalent to 257 W h kg-1 and a power density of 0.73 kW kg-1 at a current rate of 1 A g-1.

FeCoP nanosheets on NiO nanoparticles as electrocatalysts: tuning and stabilizing active sites for water splitting

Herein, we demonstrate a novel strategy for tailoring and stabilizing the interface of active sites on hierarchical three-dimensional (3D) iron-cobalt phosphide (Fe_1-xCo_xP) nanosheets on nickel oxide nanoparticles for overall water splitting. The developed bifunctional electrode required an overpotential of only ∼158 mV and ∼74 mV to attain 10 mA cm^-2 for oxygen evolution and hydrogen evolution reactions, respectively, with excellent durability over 100 h in 1.0 M KOH via engineering interfacial active sites, revealing the progress in the development of electrocatalytic activity.

Square-Facet Nanobar MOF-Derived Co3O4@Co/N-doped CNT Core-Shell-based Nanocomposites as Cathode Materials for High-Performance Supercapacitor Studies

The binary as well as ternary nanocomposites of the square-facet nanobar Co-MOF-derived Co₃O₄@Co/N-CNTs (N-CNTs: nitrogen-doped carbon nanotubes) with Ag NPs and rGO have been synthesized via an easy wet chemical route, and their supercapacitor behavior was then studied. At a controlled pH of the precursor solution, square-facet nanobars of Co-MOF were first synthesized by the solvothermal method and then pyrolyzed under a controlled nitrogen atmosphere to get a core-shell system of Co₃O₄@Co/N-CNTs. In the second step, different compositions of Co₃O₄@Co/N-CNT core-shell structures were formed by an ex-situ method with Ag NPs and rGO moieties. Among several bare, binary, and ternary compositions tested in 6 M aqueous KOH electrolyte, a ternary nanocomposite having a 7.0:1.5:1.5 stoichiometric ratio of Co₃O₄@Co/N-CNT, Ag NPs, and rGO, respectively, reported the highest specific capacitance (3393.8 F g^-1 at 5 mV s^-1). The optimized nanocomposite showed the energy density, power density, and Coulombic efficiency of 74.1 W h.kg^-1, 443.7 W.kg^-1, and 101.3%, respectively, with excellent electrochemical stability. After testing an asymmetrical supercapacitor with a Co₃O₄@Co/N-CNT/Ag NPs/rGO/nickel foam cathode and an activated carbon/nickel foam anode, it showed 4.9 W h.kg^-1 of energy density and 5000.0 W.kg^-1 of power density.

Novel Indium Vanadium Oxide Nanosheet-Supported Nickel Iron Oxide Nanoplate Heterostructure for Synergistically Enhanced Photocatalytic Degradation of Tetracycline

Semiconductor-based heterogeneous photocatalytic oxidation processes have received considerable attention for the remediation of toxic pollutants. Herein, InVO4/NiFe2O4 nanocomposites were synthesized using a facile hydrothermal technique. Furthermore, various characterization results revealed the successful loading of NiFe2O4 nanoplates over InVO4 nanosheets, thereby signifying the formation of a heterostructure. The performance of the synthesized photocatalyst was tested for tetracycline (TC) antibiotic removal. The optimized InVO4/NiFe2O4 nanocomposite exhibits maximum photodegradation of TC molecules (96.68%) in 96 min; this is approximately 6.47 and 4.93 times higher than that observed when using NiFe2O4 and InVO4, respectively. The strong interaction between the InVO4 nanosheets and NiFe2O4 nanoplates can improve the visible-light absorption and hinder the recombination of charge carriers, further enhancing the photocatalytic performance. Moreover, hydroxyl radicals play a crucial role in the photodegradation of TC antibiotics.

Cooperative Cationic and Anionic Redox Reactions in Ultrathin Polyvalent Metal Selenide Nanoribbons for High-Performance Electrochemical Magnesium-Ion Storage

Rechargeable magnesium batteries (RMBs) are considered as potential energy storage devices due to their high volumetric specific capacity, good safety, as well as source abundance. Despite extensive efforts devoted to constructing an efficient magnesium battery system, the sluggish Mg²⁺ diffusion in conventional cathode materials often leads to slow rate kinetics, low capacity, and poor cycling lifespan. Although transition metal selenides with soft anion frameworks have attracted extensive attention, their Mg²⁺ storage mechanism still needs to be clarified. Herein, we demonstrate that the ultrathin CoSe₂ nanoribbons can be used as a robust cathode material for RMBs and reveal a novel Mg²⁺ storage mechanism based on cooperative cationic (Co) and anionic (Se) redox processes via systematic ex-situ characterizations. Compared to other metal selenide cathodes based on conversion reactions of solely metal cations, the cooperative cationic-anionic redox reactions of the CoSe₂ cathode contribute to obtaining an enhanced specific capacity and boosted electrochemical kinetics. Moreover, on one hand, the ultrathin nanoribbon structure enables effective contact between the electrode material and electrolyte and on the other hand significantly reduces the length and time consumption of Mg²⁺ diffusion, leading to dominated surface-driven capacitance-controlled Mg²⁺ storage behavior and rapid Mg²⁺ storage kinetics. As a result, the ultrathin CoSe₂ nanoribbon cathode exhibits a reversible discharge capacity of ∼130 mAh g^-1 at 100 mA g^-1, good rate capability (116 mAh g^-1 at 300 mA g^-1), and long cyclability over 600 cycles. This finding confirms the development potentiality of polyvalent metal selenide cathode materials based on a cooperative cationic-anionic redox mechanism for the construction of next-generation multivalent secondary batteries.

Hierarchical NiCo2S4/ZnIn2S4 heterostructured prisms: High-efficient photocatalysts for hydrogen production under visible-light

Exploring low-cost co-catalyst to ameliorate the photocatalytic activity of semiconductors sets a clear direction for solving energy crisis and achieving efficient solar-chemical energy conversion. In this work, a unique hierarchical hollow heterojunction was constructed by in-situ growing ZnIn₂S₄ nanosheets on the porous NiCo₂S₄ hollow prisms through a low temperature solvothermal method, in which NiCo₂S₄ with semi-metal property acted as non-noble metal co-catalyst. NiCo₂S₄ co-catalyst was innovatively encapsulated in ZnIn₂S₄, which not only relieved the light shielding effect caused by the large loading amount of co-catalyst, but also supplied abundant active sites for H₂ evolution. The hierarchical hollow heterostructure of NiCo₂S₄/ZnIn₂S₄ provided a highly efficient channel for charge transfer. Combining these advantages, NiCo₂S₄/ZnIn₂S₄ composite demonstrated excellent photocatalytic activity. In the absence of sacrificial agent, the NiCo₂S₄/ZnIn₂S₄ photocatalyst achieved a remarkable improved H₂ yield of 0.77 mmol g^-1h^-1 under visible light irradiation (λ > 400 nm), which is 6.6 times greater than that of ZnIn₂S₄. Besides, NiCo₂S₄ even exhibited better performance on the H₂ evolution improvement of ZnIn₂S₄ than precious metal Pt. This work will offer novel insights into the reasonable design of non-noble metal photocatalysts with respectable activity for water splitting.

Preparation and Characterization of Multi-Doped Porous Carbon Nanofibers from Carbonization in Different Atmospheres and Their Oxygen Electrocatalytic Properties Research

Recently, electrocatalysts for oxygen reduction reaction (ORR) as well as oxygen evolution reaction (OER) hinged on electrospun nanofiber composites have attracted wide research attention. Transition metal elements and heteroatomic doping are important methods used to enhance their catalytic performances. Lately, the construction of electrocatalysts based on metal-organic framework (MOF) electrospun nanofibers has become a research hotspot. In this work, nickel-cobalt zeolitic imidazolate frameworks with different molar ratios (Ni_xCo_y-ZIFs) were synthesized in an aqueous solution, followed by Ni_xCo_y-ZIFs/polyacrylonitrile (PAN) electrospun nanofiber precursors, which were prepared by a simple electrospinning method. Bimetal (Ni-Co) porous carbon nanofiber catalysts doped with nitrogen, oxygen, and sulfur elements were obtained at high-temperature carbonization treatment in different atmospheres (argon (Ar), Air, and hydrogen sulfide (H₂S)), respectively. The morphological properties, structures, and composition were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Moreover, the specific surface area of materials and their pore size distribution was characterized by Brunauer-Emmett-Teller (BET). Linear sweep voltammetry curves investigated catalyst performances towards oxygen reduction and evolution reactions. Importantly, Ni₁Co₂-ZIFs/PAN-Ar yielded the best ORR activity, whereas Ni₁Co₁-ZIFs/PAN-Air exhibited the best OER performance. This work provides significant guidance for the preparation and characterization of multi-doped porous carbon nanofibers carbonized in different atmospheres.

All-Solid-State Polymeric Membrane Ion-Selective Electrodes Based on NiCo2S4 as a Solid Contact

The performance criteria for the design of all-solid-state ion-selective electrodes mainly include high electrode-to-electrode reproducibility and a low potential drift. Here, we introduce nickel cobalt sulfide (NiCo₂S₄) as a solid contact for ion-to-electron transduction based on multiple redox couples. NiCo₂S₄ materials with different morphologies can be prepared through a facile hydrothermal/solvothermal method. A NiCo₂S₄-based solid-contact Ca²⁺-ISE has been developed, which exhibits a Nernstian slope of 27.5 ± 0.2 mV/dec in the activity range from 1.0 × 10^-6 to 2.9 × 10^-2 M with a detection limit of 5.0 × 10^-7 M. A variation of the standard potential E° for eight individual solid-contact electrodes can be obtained as low as 0.35 mV. Due to the synergistic effect of cobalt and nickel ions in the ternary sulfide, an excellent redox capacitance (565 μF) of the buried solid contact coated with the ion-selective membrane can be achieved and is much larger than those obtained from other redox solid-contact materials reported so far, thus yielding a high potential stability of 2.2 ± 0.4 μV/h. In addition, the NiCo₂S₄-based solid-contact Ca²⁺-ISE shows a reduced water layer at the sensing membrane/NiCo₂S₄ interface and provides an excellent resistance to the interferences from light, O₂, and CO₂. The proposed strategy utilizing NiCo₂S₄ as a solid contact is a promising alternative for the fabrication of calibration-free ASS-ISEs.

Electrode Materials for Supercapacitors in Hybrid Electric Vehicles: Challenges and Current Progress

For hybrid electric vehicles, supercapacitors are an attractive technology which, when used in conjunction with the batteries as a hybrid system, could solve the shortcomings of the battery. Supercapacitors would allow hybrid electric vehicles to achieve high efficiency and better power control. Supercapacitors possess very good power density. Besides this, their charge-discharge cycling stability and comparatively reasonable cost make them an incredible energy-storing device. The manufacturing strategy and the major parts like electrodes, current collector, binder, separator, and electrolyte define the performance of a supercapacitor. Among these, electrode materials play an important role when it comes to the performance of supercapacitors. They resolve the charge storage in the device and thus decide the capacitance. Porous carbon, conductive polymers, metal hydroxide, and metal oxides, which are some of the usual materials used for the electrodes in the supercapacitors, have some limits when it comes to energy density and stability. Major research in supercapacitors has focused on the design of stable, highly efficient electrodes with low cost. In this review, the most recent electrode materials used in supercapacitors are discussed. The challenges, current progress, and future development of supercapacitors are discussed as well. This study clearly shows that the performance of supercapacitors has increased considerably over the years and this has made them a promising alternative in the energy sector.

Designed synthesis of nickel-cobalt-based electrode materials for high-performance solid-state hybrid supercapacitors

Supercapacitors with high security, excellent energy and power densities, and superior long-term cycling performance are becoming increasingly essential for flexible devices. Herein, this study has reported a novel method to synthesize CoNi2S4, which delivered a high specific capacitance of 1836.6 F g-1 at 1 A g-1, with a slight fluctuation in the testing temperature rising up to 50 °C (1855.2 F g-1) or decreasing to 0 °C (1587.6 F g-1). In addition, the corresponding solid-state CoNi2S4//AC HSC could achieve a high energy density of 35.8 W h kg-1 at a power density of 800.0 W kg-1, with nearly no change when tested at 0 °C and 50 °C, and possessed excellent long-term electrochemical cycling stability of 132.3% after 50 000 cycles; the solid-state hybrid supercapacitor using biomass-derived carbon (BC) as the negative electrode (CoNi2S4//BC HSC) could also deliver a high energy density of 38.9 W h kg-1 at a power density of 850.0 W kg-1 and the specific capacitance retention was 101.2% after cycling for 50 000 times. This work has provided a promising method to prepare high-performance electrode materials for solid-state hybrid supercapacitors with superior cycling stability and energy density.

Nanosheet-assembled microflower-like coordination polymers by surfactant-assisted assembly with enhanced catalytic activity

Nanosheet-assembled microflower-like coordination polymers were successfully prepared by a surfactant-assisted approach and used as an efficient heterogeneous catalyst to execute the conversion reactions of nitromethylbenzenes into benzoic acids.

Attuning the Electronic Properties of Two-Dimensional Co-Fe-O for Accelerating Water Electrolysis and Photolysis

Two-dimensional (2D) materials such as layered double hydroxides (LDH) are promising electrocatalysts, especially for water oxidation, owing to their unique physical and electronic properties besides having adequate surface area and availability of unsaturated active metal centers. Herein, we illustrate the high-temperature transformation of bimetallic LDH to semicrystalline 2D metal oxide nanoplates that can maneuver their electronic properties and thereby accelerate the water dissociation reactions. The nanoplates prepared at 300 °C require only 280 ± 13 and 177 ± 7 mV overpotentials for oxygen/hydrogen evolution reactions (OER and HER) to achieve a current density of ±10 mA cm^-2 in 1 M KOH, respectively. In a two-electrode water splitting cell, while this bifunctional catalyst needs 1.69 V to deliver a current density of 10 mA cm^-2, the LDH precursor demands a cell voltage of 1.93 V. However, both the catalysts demonstrate excellent durability for more than 200 h. When the bifunctional metal oxide electrolyzer is connected to perovskite solar cells for unassisted solar-driven water splitting, impressively, such an integrated photovoltaic-electrolyzer can achieve a solar-to-hydrogen (STH) efficiency of 9.3%. The predominantly superior catalytic activity of the nanoplates is due to the abundance of unsaturated oxygen which decreases the free energy of adsorption of the intermediates.

Triboelectric Nanogenerator Driven Self-Charging and Self-Healing Flexible Asymmetric Supercapacitor Power Cell for Direct Power Generation

The expeditious growth of portable electronics has endorsed the researchers to develop self-powered devices that synchronically harvest and store energy. However, it is quite challenging to integrate two distinct phenomena in a single portable device. Here, we emphasize the fabrication of a triboelectric driven self-charging and self-healing asymmetric supercapacitor (SCSHASC) power cell composed of magnetic cobalt ferrite grown on a stainless steel (SS) fabric (CoFe₂O₄@SS) as positive and iron oxides decorated reduced graphene oxide grown on a SS fabric (Fe-RGO@SS) as negative electrodes separated by a KOH-soaked self-healing polymer hydrogel electrolyte membrane. The membrane contains Fe³⁺ cross-linked polyacrylic acid, whereas self-healing carboxylated polyurethane was utilized for encapsulation. SS fabric and poly(vinylidene fluoride- co-hexafluoropropylene) (PVDF-HFP)/SS-impregnated micropatterned PDMS composite film-strip were employed as positive and negative triboelectric friction layers, respectively. During mechanical deformation, the SCSHASC harvests electrical energy and subsequently stores it as electrochemical energy for sustainable power supply. The sandwich-type SCSHASC power cell (a supercapacitor unit sandwiched between two parallelly connected high-performance triboelectric nanogenerators) was charged up to ∼1.6 V within ∼31 min under periodic compression/stress ( F ≈ 17.6 N, f ≈ 3.80 Hz). Furthermore, the SCSHASC# (with two supercapacitor units in series) can instantly power-up several portable electronic appliances on periodic compression and release. Thus, the SCSHASC with unique design will be extremely beneficial for self-powered electronics.

S,N co-doped reduced graphene oxide sheets with cobalt hydroxide nanocrystals for highly active and stable bifunctional oxygen catalysts

A Co(OH)₂ anchored on S,N co-doped rGO as a highly active and stable bifunctional oxygen catalyst was developed via an efficient strategy and its catalytic activity was comparable to that of the benchmarked noble metal-based oxygen catalysts.

Formation of CoNi2S4 nanofibers with 3D hierarchical pompom-like structure for high-rate electrochemical capacitors

Pompom-like 3D hierarchical structured CoNi₂S₄ nanofibers are obtained via a two-step anion exchange route, exhibiting good high-rate performance.

Electrochemical study of specially designed graphene-Fe3O4-polyaniline nanocomposite as a high-performance anode for lithium-ion battery

In this work, an anode material with improved thermal stability, charge capacity, charge capacity retention, energy density, cyclic performance, operation safety, reversible capacity, and rate capability was synthesized for battery applications. The graphene-magnetite-polyaniline (Gr-Fe3O4-PANI) nanocomposites (NCs) are believed to deliver outstanding performance owing to the collective effect of the layered graphene (Gr) and magnetite (Fe3O4) hollow rods (HRs), as well as the better conductivity of polyaniline (PANI). The Gr-Fe3O4-PANI NCs easily enable the insertion and deinsertion of Li+, the passage of ions in the electrode, fast kinetics of Li+, and low volume expansion. Gr-Fe3O4-PANI NC was prepared by polymerizing aniline in the presence of already prepared Fe3O4 HRs, then dispersing in Gr. Fe3O4 HRs were synthesized by a hydrothermal route. Electrochemical properties were investigated by galvanostatic charge-discharge analysis and cyclic voltammetry. A lithium-ion battery (LIB) based on the Gr-Fe3O4-PANI exhibited a superior reversible current capacity of 1214 mA h g-1, excellent power capability, low volume expansion, high cycling stability and 99.6% coulombic efficiency over 250 cycles.

Development of Novel and Ultra-High-Performance Supercapacitor Based on a Four Layered Unique Structure

This paper presents an electrode with a core/shell geometry and a unique four-layered porous wrinkled surface for pseudocapacitive supercapacitor applications. To design the electrode, Ni foam was used as a substrate, where the harmonious features of four constituents, ZnO (Z), NiS (N), PEDOT:PSS (P), and MnO2 (M) improved the supercapacitor electrochemical performance by mitigating the drawbacks of each other component. Cyclic voltammetry and galvanostatic charge discharge measurements confirmed that the ZNPM hybrid electrode exhibited excellent capacitive properties in 2 M KOH compared to the ZNP, ZN, and solely Z electrodes. The ZNPM electrode showed superior electrochemical capacitive performance and improved electrical conductivity with a high specific capacitance of 2072.52 F g−1 at 5 mA, and a high energy density of 31 Wh kg−1 at a power density of 107 W kg−1. Overall, ZNPM is a promising combination electrode material that can be used in supercapacitors and other electrochemical energy conversion/storage devices.

Development of Highly Active Bifunctional Electrocatalyst Using Co3O4 on Carbon Nanotubes for Oxygen Reduction and Oxygen Evolution

Replacement of precious platinum catalyst with efficient and cheap bifunctional alternatives would be significantly beneficial for electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) and the application of these catalysts in fuel cells is highly crucial. Despite numerous studies on electrocatalysts, the development of bifunctional electrocatalysts with comparatively better activity and low cost remains a big challenge. In this paper, we report a nanomaterial consisting of nanocactus-shaped Co3O4 grown on carbon nanotubes (Co3O4/CNTs) and employed as a bifunctional electrocatalyst for the simultaneous catalysis on ORR, and OER. The Co3O4/CNTs exhibit superior catalytic activity toward ORR and OER with the smallest potential difference (0.72 V) between the [Formula: see text] (1.55 V) for OER and E1/2 (0.83 V) for ORR. Thus, Co3O4/CNTs are promising high-performance and cost-effective bifunctional catalysts for ORR and OER because of their overall superior catalytic activity and stability compared with 20 wt% Pt/C and RuO2, respectively. The superior catalytic activity arises from the unique nanocactus-like structure of Co3O4 and the synergetic effects of Co3O4 and CNTs.

Advanced binder-free electrodes based on CoMn2O4@Co3O4 core/shell nanostructures for high-performance supercapacitors

Three-dimensional (3D) hierarchical CoMn₂O₄@Co₃O₄ core/shell nanoneedle/nanosheet arrays for high-performance supercapacitors were designed and synthesized on Ni foam by a two-step hydrothermal route. The hybrid nanostructure exhibits much more excellent capacitive behavior compared with either the pristine CoMn₂O₄ nanoneedle arrays alone or Co₃O₄ nanosheets alone. The formation of an interconnected pore hybrid system is quite beneficial for the facile electrolyte penetration and fast electron transport. The CoMn₂O₄@Co₃O₄ electrode can achieve a high specific capacitance of 1627 F g⁻¹ at 1 A g⁻¹ and 1376 F g⁻¹ at 10 A g⁻¹. In addition, an asymmetric supercapacitor (ASC) was assembled by using the CoMn₂O₄@Co₃O₄ core/shell hybrid nanostructure arrays on Ni foam as a positive electrode and activated carbon as a negative electrode in an aqueous 3 M KOH electrolyte. A specific capacitance of 125.8 F g⁻¹ at 1 A g⁻¹ (89.2% retention after 5000 charge/discharge cycles at a current density of 2 A g⁻¹) and a high energy density of 44.8 W h kg⁻¹ was obtained. The results indicate that the obtained unique integrated CoMn₂O₄@Co₃O₄ nanoarchitecture may show great promise as ASC electrodes for potential applications in energy storage.

CoMn₂O₄@Co₃O₄ core/shell arrays on Ni foam exhibit outstanding electrochemical performance for asymmetric supercapacitors with respect to high specific capacitance and high cycling stability.

Geometrically intricate sheet-on-pillar/flake hierarchy embracing cobaltosic and manganese oxides over flexible carbon scaffold for binder-free high-energy-density supercapacitor

Sheet-on-rod/flake hierarchy embracing Co₃O₄ and MnO₂ on carbon fabric is used for binder-free high-energy-density supercapacitor. Electrochemical behaviour is illuminated on the basis of shape-porosity-property correlation.

A high energy density asymmetric supercapacitor utilizing a nickel phosphate/graphene foam composite as the cathode and carbonized iron cations adsorbed onto polyaniline as the anode

This work presents the effect of different contents of graphene foam (GF) on the electrochemical capacitance of nickel phosphate Ni₃(PO₄)₂ nano-rods as an electrode material for hybrid electrochemical energy storage device applications.

Synthesis of cobalt-doped nickel sulfide nanomaterials with rich edge sites as high-performance supercapacitor electrode materials

Edge site enrichment enhanced the electrochemical performance of Ni_0.75Co_0.25S₂ for supercapacitor application.

Synthesis of Mesoporous CoS2 and NixCo1-xS2 with Superior Supercapacitive Performance Using a Facile Solid-Phase Sulfurization

Synthesis of nanostructured transition metal sulfides is of particular interest in providing new methods to control their porosity and improve their surface area because those sulfides hold promising applications in high-energy density devices. Significant challenges remain currently to prepare metal sulfides having three-dimensional (3-D) continuous mesoporous structures, known to be critical for increasing their active surface sites and enhancing ion transport. We herein present a facile solid-phase sulfurization method to synthesize 3-D continuous mesoporous CoS₂, NiS₂, and their binary sulfides in a two-step nanocasting using bicontinuous KIT-6 as hard templates. The solid-phase sulfurization taking place at 400 °C yields mesoporous sulfides with highly crystalline frameworks and a stoichiometric ratio of metal-to-sulfur, 1:2 (mol), within 30 min. Elemental sulfur as an inexpensive sulfur source can be directly used for the solid-phase sulfurization of mesoporous oxides of Co₃O₄, NiO, and their binary oxides. This facile synthetic method is highly efficient to prepare mesoporous sulfides in the gram-scale production at a very low cost. Mesoporous sulfides are demonstrated to be superior electrode materials for pseudo-supercapacitors, given their high surface area and accessible bicontinuous mesopores, the suitable crystalline sizes, and the enhanced ion transport capability. The use of binary mesoporous sulfides presents interesting synergetic effect where the doping of metal ions can significantly enhance the capacitive performance of single-component sulfides. The binary sulfides of mNi_0.32Co_0.68S₂ show a specific capacitance up to 1698 F g^-1 at a current density of 2 A g^-1. The supercapacitor device of mNi_0.32Co_0.68S₂ has a high energy density of 37 Wh kg^-1 at a power density of 800 W kg^-1. We believe that the reported solid-phase synthesis offers a universal method toward the conversion of mesoporous oxides materials into various useful and functional forms for energy conversion and storage applications.