Bis(diisopropylamino)cyclopropenium-arene Cations as High Oxidation Potential and High Stability Catholytes for Non-aqueous Redox Flow Batteries

Benchmarking Trisaminocyclopropeniums as Mediators for Anodic Oxidation Reactions

This report benchmarks a tris(amino)cyclopropenium (TAC) salt as an electron-transfer mediator for anodic oxidation reactions in comparison to two known mediators: a triarylamine and a triarylimidazole derivative. The three mediators have redox potentials, diffusion coefficients, and heterogeneous electron transfer rates similar to those of glassy carbon electrodes in acetonitrile/KPF6. However, they differ significantly in their performance in two electro-organic reactions: anodic fluorination of a dithiane and anodic oxidation of 4-methoxybenzyl alcohol. These differences are rationalized based on variable stability in the presence of reaction components (e.g., NEt3·3HF, lutidine, and Cs2CO3) as well as very different rates of electron transfer with the organic substrate. Overall, this work highlights the advantages and disadvantages of each mediator and provides a foundation for expanding the applications of TACs in electro-organic synthesis moving forward.

Development of the Squaramide Scaffold for High Potential and Multielectron Catholytes for Use in Redox Flow Batteries

Nonaqueous organic redox flow batteries (N-ORFBs) are a promising technology for grid-scale storage of energy generated from intermittent renewable sources. Their primary benefit over traditional aqueous RFBs is the wide electrochemical stability window of organic solvents, but the design of catholyte materials, which can exploit the upper range of this window, has proven challenging. We report herein a new class of N-ORFB catholytes in the form of squaric acid quinoxaline (SQX) and squaric acid amide (SQA) materials. Mechanistic investigation of decomposition in battery-relevant conditions via NMR, HRMS, and electrochemical methods enabled a rational design approach to optimizing these scaffolds. Three lead compounds were developed: a highly stable one-electron SQX material with an oxidation potential of 0.51 V vs Fc/Fc+ that maintained 99% of peak capacity after 102 cycles (51 h) when incorporated into a 1.58 V flow battery; a high-potential one-electron SQA material with an oxidation potential of 0.81 V vs Fc/Fc+ that demonstrated negligible loss of redox active material as measured by pre- and postcycling CV peak currents when incorporated in a 1.63 V flow battery for 110 cycles over 29 h; and a proof-of-concept two-electron SQA catholyte material with oxidation potentials of 0.48 and 0.85 V vs Fc/Fc+ that demonstrated a capacity fade of just 0.56% per hour during static H-cell cycling. These findings expand the previously reported space of high-potential catholyte materials and showcase the power of mechanistically informed synthetic design for N-ORFB materials development.

Aryl Azocyclopropeniums: Minimalist, Visible-Light Photoswitches

We report convenient syntheses of aryl azocyclopropeniums and a study of their photochemical properties. Incorporation of the smallest arene leads to pronounced redshift of the π-π* absorbance band, compared to azobenzenes. Photoisomerization under purple or green light irradiation affords Z- or E-isomers in ratios up to 94% Z or 90% E, and the switches proved stable over multiple irradiation cycles. Thermal half-lives of metastable Z-isomers range from minutes to hours in acetonitrile and water. These properties together with the concise, versatile syntheses render aryl azocyclopropeniums exciting additions to the tool kit of readily available molecular photoswitches for wide ranging applications.

Data science enabled discovery of a highly soluble 2,2'-bipyrimidine anolyte for application in a flow battery

Development of non-aqueous redox flow batteries as a viable energy storage solution relies upon the identification of soluble charge carriers capable of storing large amounts of energy over extended time periods. A combination of metrics including number of electrons stored per molecule, redox potential, stability, and solubility of the charge carrier impact performance. In this context, we recently reported a 2,2'-bipyrimidine charge carrier that stores two electrons per molecule with reduction near -2.0 V vs. Fc/Fc+ and high stability. However, these first-generation derivatives showed a modest solubility of 0.17 M (0.34 M e-). Seeking to improve solubility without sacrificing stability, we harnessed the synthetic modularity of this scaffold to design a library of sixteen candidates. Using computed molecular descriptors and a single node decision tree, we found that minimization of the solvent accessible surface area (SASA) can be used to predict derivatives with enhanced solubility. This parameter was used in combination with a heatmap describing stability to de-risk a virtual screen that ultimately identified a 2,2'-bipyrimidine with significantly increased solubility and good stability metrics in the reduced states. This molecule was paired with a cyclopropenium catholyte in a prototype all-organic redox flow battery, achieving a cell potential up to 3 V.

Modular preparation of cationic bipyridines and azaarenes via C-H activation

Bipyridines are ubiquitous in organic and inorganic chemistry because of their redox and photochemical properties and their utility as ligands to transition metals. Cationic substituents on bipyridines and azaarenes are valuable as powerful electron-withdrawing functionalities that also enhance solubility in polar solvents, but there are no general methods for direct functionalization. A versatile method for the preparation of trimethylammonium- and triarylphosphonium-substituted bipyridines and azaheterocycles is disclosed. This methodology showcases a C-H activation of pyridine N-oxides that enables a highly modular and scalable synthesis of a diverse array of cationically charged azaarenes. The addition of trimethylammonium functionalities on bipyridine derivatives resulted in more anodic reduction potentials (up to 700 mV) and increased electrochemical reversibility compared to the neutral unfunctionalized bipyridine. Additonally, metallation of 4-triphenylphosphinated biquinoline to make the corresponding Re(CO)3Cl complex resulted in reduction potentials 400 mV more anodic than the neutral derivative.

Identifying structure-function relationships to modulate crossover in nonaqueous redox flow batteries

Nonaqueous redox flow batteries (NARFBs) offer a promising solution for large-scale storage of renewable energy. However, crossover of redox active molecules between the two sides of the cell is a major factor limiting their development, as most selective separators are designed for deployment in water, rather than organic solvents. This report describes a systematic investigation of the crossover rates of redox active organic molecules through an anion exchange separator under RFB-relevant non-aqueous conditions (in acetonitrile/KPF6) using a combination of experimental and computational methods. A structurally diverse set of neutral and cationic molecules was selected, and their rates of crossover were determined experimentally with the organic solvent-compatible anion exchange separator Fumasep FAP-375-PP. The resulting data were then fit to various descriptors of molecular size, charge, and hydrophobicity (overall charge, solution diffusion coefficient, globularity, dynamic volume, dynamic surface area, clogP). This analysis resulted in multiple statistical models of crossover rates for this separator. These models were then used to predict tether groups that dramatically slow the crossover of small organic molecules in this system.

A Physical Organic Chemistry Approach to Developing Cyclopropenium-Based Energy Storage Materials for Redox Flow Batteries

ConspectusRedox flow batteries (RFBs) represent a promising modality for electrical energy storage. In these systems, energy is stored via paired redox reactions of molecules on opposite sides of an electrochemical cell. Thus, a central objective for the field is to design molecules with the optimal combination of properties to serve as energy storage materials in RFBs. The ideal molecules should undergo reversible redox reactions at relatively high potentials (for the molecule that is oxidized during battery charging, called the catholyte) or low potentials (for the species that is reduced during battery charging, called the anolyte). Furthermore, anolytes and catholytes must be highly soluble in the electrolyte solution and stable to extended electrochemical cycling in all battery-relevant redox states. The ideal candidates would undergo more than one reversible electron transfer event. Finally, the optimal structures should be resistant to crossover through a selective separator in order to maintain isolation of the two sides of the cell. This Account describes our design and optimization of organic molecules for this application. We first provide background for the metrics and experiments used to characterize anolytes/catholytes and to progress them toward deployment in flow batteries. We then use our studies of aminocyclopropenium-based catholytes to illustrate this workflow and approach.We identified tris(dimethylamino) cyclopropenium hexafluorophosphate as a first-generation catholyte for nonaqueous RFBs based on literature reports from the 1970s describing its reversible chemical and electrochemical oxidation. Cyclic voltammetry and electrochemical cycling experiments in acetonitrile/LiPF₆ confirmed that this molecule undergoes oxidation at relatively high potential (0.86 V versus ferrocene/ferrocenium) and exhibits moderate stability toward charge-discharge cycling. Replacing the methyl groups with isopropyl substituents led to enhanced cycling stability but poor solubility of the radical dication (<0.1 M in acetonitrile). Solubility was optimized using quantitative structure-property relationship modeling, which predicted derivatives with ≥10-fold enhanced solubility. Cyclopropeniums with 300-500 mV higher redox potentials were identified by replacing one of the dialkylamino substituents with a less electron-donating thioalkyl or aryl group. Multielectron catholytes were developed by creating hybrid structures that contain a di(amino) cyclopropenium conjugated with a phenothiazine moeity. Finally, oligomeric tris(amino) cyclopropeniums were designed as crossover resistant catholytes. Optimization of their solubility enabled the deployment of these oligomers in high concentration asymmetric redox flow batteries with energy densities that are comparable to the state-of-the-art commercial aqueous inorganic systems.

Automated Measurement of Electrogenerated Redox Species Degradation Using Multiplexed Interdigitated Electrode Arrays

Characterizing the decomposition of electrogenerated species in solution is essential for applications involving electrosynthesis, homogeneous electrocatalysis, and energy storage with redox flow batteries. In this work, we present an automated, multiplexed, and highly robust platform for determining the rate constant of chemical reaction steps following electron transfer, known as the EC mechanism. We developed a generation-collection methodology based on microfabricated interdigitated electrode arrays (IDAs) with variable gap widths on a single device. Using a combination of finite-element simulations and statistical analysis of experimental data, our results show that the natural logarithm of collection efficiency is linear with respect to gap width, and this quantitative analysis is used to determine the decomposition rate constant of the electrogenerated species (k _c). The integrated IDA method is used in a series of experiments to measure k _c values between ∼0.01 and 100 s^-1 in aqueous and nonaqueous solvents and at concentrations as high as 0.5 M of the redox-active species, conditions that are challenging to address using standard methods based on conventional macroelectrodes. The versatility of our approach allows for characterization of a wide range of reactions including intermolecular cyclization, hydrolysis, and the decomposition of candidate molecules for redox flow batteries at variable concentration and water content. Overall, this new experimental platform presents a straightforward automated method to assess the degradation of redox species in solution with sufficient flexibility to enable high-throughput workflows.

Recent Progress in High-voltage Aqueous Zinc-based Hybrid Redox Flow Batteries

The energy density of redox flow batteries (RFBs) is generally affected by the standard electrode potential and the solubility of the redox active species. These crucial factors are closely related to the solvent in which the active materials are dissolved. Aqueous RFBs have been widely studied due to their excellent reaction kinetics and high solubility of the redox couple in aqueous media. However, the low voltage of conventional aqueous RFBs has hindered them from being candidates for practical applications. Recently, high-voltage aqueous RFBs are implemented based on the low negative potential of the Zn/[Zn(OH)₄ ]^2- reaction in an alkaline solution. Here, we review recent progress in the design of high energy density RFBs in both aqueous and non-aqueous electrolytes, notably focusing on the Zn/MnO₂ hybrid RFBs in detail. Furthermore, strategies for inhibiting zinc dendritic growth and stabilizing manganese redox couple in the RFBs system are discussed.

Efficient AcFc-[FeIII (acac)3 ] Redox Couple for Non-aqueous Redox Flow Battery at Low Temperature

The temperature dependency of the electrochemical analysis of acetyl ferrocene (AcFc) and iron(III) acetylacetonate ([Fe(acac)₃ ]) has been investigated for non-aqueous redox flow batteries (NARFBs). AcFc and [Fe(acac)₃ ] were utilized as catholyte and anolyte species, respectively, in an electrochemical cell with a cell voltage of 1.41 V and Coulombic efficiencies >99% for up to 50 total cycles at room temperature (RT, 25 °C). Experiments with a rotating ring disk electrode (RRDE) indicate that the diffusion coefficient reduces with decreasing temperature from 25 °C to 0 °C, yet the overall storage capacity was higher than that of an aqueous redox flow battery (ARFBs). The electrochemical kinetic rate constant (k₀ ) of AcFc was found to be greater than that of [Fe(acac)₃ ]. However, the value of k₀ was not affected by the variable temperature. ¹ H NMR investigations reveal that temperature change during battery trials did not occur in any structural modification. The obtained result demonstrates the suitability of this battery at low temperatures.

High Energy Density, Asymmetric, Nonaqueous Redox Flow Batteries without a Supporting Electrolyte

Energy density in nonaqueous redox flow batteries (RFBs) is often limited by the modest solubility of the redox-active organic molecules (ROMs). In addition, the lack of a separator that prevents ROMs from crossing between anolyte and catholyte solutions necessitates the use of 1:1 mixtures of two ROMs in both the anolyte and catholyte solutions in symmetric RFBs, further limiting concentrations. We show that permanently cationic oligomers of viologen, tris(dialkylamino)cyclopropenium, and phenothiazine molecules have high solubility in acetonitrile and cross over an anion exchange membrane at slow to undetectable rates, enabling the creation of asymmetric RFBs with low crossover. No added supporting electrolyte is necessary, with only the PF6- counteranions of the ROMs crossing the membrane during charge/discharge. An oligomeric viologen + oligomeric cyclopropenium RFB at 1.0 M (redox equivalents) has a voltage of 1.66 V and a theoretical energy density of 22.2 Wh/L, one of the highest reported for nonaqueous RFBs.

Catalytic Synthesis of Cyclopropenium Cations with Rh-Carbynoids

Herein, we report the first catalytic one-step synthesis of cyclopropenium cations (CPCs) with readily available alkynes and hypervalent iodine reagents as carbyne sources. Key to the process is the catalytic generation of a novel Rh-carbynoid that formally transfers monovalent cationic carbynes (:⁺C-R) to alkynes via an oxidative [2+1] cycloaddition. Our process is able to synthesize a new type of CPC substituted with an ester group that underpins the regioselective attack of a broad range of carbon and heteroatomic nucleophiles, thus providing a new platform for the synthesis of valuable cyclopropenes difficult or not possible to make by current methodologies.

Organic Four-Electron Redox Systems Based on Bipyridine and Phenanthroline Carbene Architectures

Novel organic redox systems that display multistage redox behaviour are highly sought-after for a series of applications such as organic batteries or electrochromic materials. Here we describe a simple strategy to transfer well-known two-electron redox active bipyridine and phenanthroline architectures into novel strongly reducing four-electron redox systems featuring fully reversible redox events with up to five stable oxidation states. We give spectroscopic and structural insight into the changes involved in the redox-events and present characterization data on all isolated oxidation states. The redox-systems feature strong UV/Vis/NIR polyelectrochromic properties such as distinct strong NIR absorptions in the mixed valence states. Two-electron charge-discharge cycling studies indicate high electrochemical stability at strongly negative potentials, rendering the new redox architectures promising lead structures for multi-electron anolyte materials.

A Nonaqueous Redox-Matched Flow Battery with Charge Storage in Insoluble Polymer Beads

We describe the nonaqueous redox-matched flow battery (RMFB), where charge is stored on redox-active moieties covalently tethered to non-circulating, insoluble polymer beads and charge is transferred between the electrodes and the beads via soluble mediators with redox potentials matched to the active moieties on the beads. The RMFB reported herein uses ferrocene and viologen derivatives bound to crosslinked polystyrene beads. Charge storage in the beads leads to a high (approximately 1.0-1.7 M) effective concentration of active material in the reservoirs while preventing crossover of that material. The relatively low concentration of soluble mediators (15 mM) eliminates the need for high-solubility molecules to create high energy density batteries. Nernstian redox exchange between the beads and redox-matched mediators was fast relative to the cycle time of the RMFB. This approach is generalizable to many different redox-active moieties via attachment to the versatile Merrifield resin.

Recent advances in the organocatalytic applications of cyclopropene- and cyclopropenium-based small molecules

The development of novel small molecule-based catalysts for organic transformations has increased noticeably in the last two decades. A very recent addition to this particular research area is cyclopropene- and cyclopropenium-based catalysts. At one point in time, particularly in the mid-20^th century, much attention was focused on the structural aspects and physical properties of cyclopropene-based compounds. However, a paradigm shift was observed in the late 20^th century, and the focus shifted to the synthetic utility of these compounds. In fact, a wide range of cyclopropene derivatives have been found serving as valuable synthons for the construction of carbocycles, heterocycles and other useful organic compounds. In the last few years, the catalytic applications of cyclopropene/cyclopropenium-based compounds have been uncovered and many synthetic protocols have been developed using cyclopropene-based compounds as organocatalysts. Therefore, the main objective of this review is to highlight recent developments in the catalytic applications of cyclopropene-based small molecules in different areas of organocatalysis such as phase-transfer catalysis (PTC), Brønsted base catalysis, hydrogen-bond donor catalysis, nucleophilic carbene catalysis, and electrophotocatalysis developed within the past two decades.

Simultaneously Enhancing the Redox Potential and Stability of Multi-Redox Organic Catholytes by Incorporating Cyclopropenium Substituents

High redox potential, two-electron organic catholytes for nonaqueous redox flow batteries were developed by appending diaminocyclopropenium (DAC) substituents to phenazine and phenothiazine cores. The parent heterocycles exhibit two partially reversible oxidations at moderate potentials [both at lower than 0.7 V vs ferrocene/ferrocenium (Fc/Fc⁺)]. The incorporation of DAC substituents has a dual effect on these systems. The DAC groups increase the redox potential of both couples by ∼300 mV while simultaneously rendering the second oxidation (which occurs at 1.20 V vs Fc/Fc⁺ in the phenothiazine derivative) reversible. The electron-withdrawing nature of the DAC unit is responsible for the increase in redox potential, while the DAC substituents stabilize oxidized forms of the molecules through resonance delocalization of charge and unpaired spin density. These new catholytes were deployed in two-electron redox flow batteries that exhibit voltages of up to 2.0 V and no detectable crossover over 250 cycles.

Electrochemical Evaluation of Diketopyrrolopyrrole Derivatives for Nonaqueous Redox Flow Batteries

Redox flow batteries (RFBs) employing nonaqueous electrolytes could potentially operate at much higher cell voltages, and therefore afford higher energy and power densities, than RFBs employing aqueous electrolytes. The development of such high-voltage nonaqueous RFBs requires anolytes that are electrochemically stable, especially in the presence of traces of oxygen and/or moisture. The inherent atmospheric reactivity of anolytes mandates judicious molecular design with high electron affinity and electrochemical stability. In this study, diketopyrrolopyrrole (DPP)-based TDPP-Hex-CN₄ is proposed as a stable redox-active molecule for anolytes in nonaqueous organic RFBs. We demonstrate organic RFBs using TDPP-Hex-CN₄ as anolyte with unisol blue (UB) 1,4-bis(isopropylamino)anthraquinone and 1,4-di-tert-butyl-2,5-bis(2-methoxyethoxy)benzene (DBBB) as catholytes. Cyclic voltammetry measurements with scans repeated over 200 cycles were performed to establish the electrochemical stability of the redox pairs. Symmetric flow-cell studies show that TDPP-Hex-CN₄ exhibits stable capacity up to 700 cycles. Redox flow cells employing TDPP-Hex-CN₄ /UB and TDPP-Hex-CN₄ /DBBB as redox pairs demonstrate that DPP derivatives are propitious materials for anolytes in all organic nonaqueous RFBs.

Designing high energy density flow batteries by tuning active-material thermodynamics

The cost of electricity generated by wind and solar installations has become competitive with that generated by burning fossil fuels. While this paves the way for a carbon-neutral electrical grid, short- and long-term intermittency necessitates energy storage. Flow batteries are a promising technology to accommodate this need, with numerous advantages, including decoupled power and energy ratings, which imparts flexibility, thermal stability, and safety. Further, development of robust nonaqueous systems has the potential to greatly improve energy density, approaching that of lithium-ion batteries, while maintaining the advantages of flow systems. Herein we report a breakthrough on a bio-inspired nonaqueous redox flow battery (NRFB) electrolyte, which contains high-concentration active-material and maintains stability during deep cycling for extended time-periods. These advances are reinforced by thermodynamic considerations and computational investigations, which provide a clear path to further improvements. Electrochemical studies confirm that the active-material maintains its high stability at high concentration. This molecular scaffold clears two important hurdles in designing active-materials for nonaqueous electrolytes - low solubility and poor stability - providing an in-road to development of high-performance NRFB systems.

Interrogation of 2,2'-Bipyrimidines as Low-Potential Two-Electron Electrolytes

As utilization of renewable energy sources continues to expand, the need for new grid energy storage technologies such as redox flow batteries (RFBs) will be vital. Ultimately, the energy density of a RFB will be dependent on the redox potentials of the respective electrolytes, their solubility, and the number of electrons stored per molecule. With prior literature reports demonstrating the propensity of nitrogen-containing heterocycles to undergo multielectron reduction at low potentials, we focused on the development of a novel electrolyte scaffold based upon a 2,2'-bipyrimidine skeleton. This scaffold is capable of storing two electrons per molecule while also exhibiting a low (∼-2.0 V vs Fc/Fc+) reduction potential. A library of 24 potential bipyrimidine anolytes were synthesized and systematically evaluated to unveil structure-function relationships through computational evaluation. Through analysis of these relationships, it was unveiled that steric interactions disrupting the planarity of the system in the reduced state could be responsible for higher levels of degradation in certain anolytes. The major decomposition pathway was ultimately determined to be protonation of the dianion by solvent, which could be reversed by electrochemical or chemical oxidation. To validate the hypothesis of strain-induced decomposition, two new electrolytes with minimal steric encumbrance were synthesized, evaluated, and found to indeed exhibit higher stability than their sterically hindered counterparts.