Use of capillary electrophoresis and indirect detection to quantitate in-capillary enzyme-catalyzed microreactions

New development in in-capillary electrophoresis techniques for kinetic and inhibition study of enzymes

Enzymes are often quantified by measuring their biological activity. Capillary electrophoresis is gaining its position in this field due to the ongoing trend to miniaturize biochemical assays. The aim of this work was to compare pre-capillary (off-line) and in-capillary electrophoresis techniques for studying enzymatic activity. The β-galactosidase (β-Gal) was chosen as a model enzyme. Each technique was optimized independently in order to decrease analyte consumption (to few tens of nanoliters), incubation time (to few seconds) and analysis time (below 1 min). Several experimental parameters (ionic strength of the background electrolyte (BGE) and of the incubation buffer, incubation time, injected volumes, …) were optimized by following peak efficiencies, resolution and repeatability. To monitor the performance of each technique, the catalytic constants (V(max) and K(m)) of 4-nitro-phenyl-d-galactopyranoside (PNPG) hydrolysis by β-Gal as well as the inhibition constants (K(i) and IC(50)) by a competitive inhibitor 2-nitrophenyl-1-thio-β-d-thiogalactopyranoside (ONPTG) were determined. The results obtained were cross compared and were also evaluated by comparison to a standard spectrophotometric method. EMMA proved to be the best technique in terms of sample consumption and speed. The short-end injection was successfully used which speeded-up electrophoretic analysis (<0.8 min). It is a very powerful tool for studying enzymatic inhibition. Usually, the inhibitor is injected in the capillary mixed to the substrate especially when both have similar mobilities. We show in this work, for the first time, that combining at-inlet reaction with EMMA-CE allows enzyme inhibition to be realized without any prior mixing of the substrate and the inhibitor. This approach is very interesting for screening inhibitors, rapidly and without excessive substrate consumption.

Response surface examination of the relationship between experimental conditions and product distribution in electrophoretically mediated microanalysis

This work presents the first known use of response surface methodology (RSM) in electrophoretically mediated microanalysis. This concept is demonstrated by examining the optimization of reaction conditions for the conversion of nicotinamide adenine dinucleotide to nicotinamide adenine dinucleotide, reduced form by glucose-6-phosphate dehydrogenase (G6PDH, EC 1.1.1.49) in the conversion of glucose-6-phosphate to 6-phosphogluconate. Experimental factors including voltage, enzyme concentration, and mixing time of reaction at the applied voltage were selected at three levels and tested in a Box-Behnken response surface design. Upon migration in a capillary under CE conditions, plugs of substrate and enzyme are injected separately in buffer and allowed to react at variable conditions. Extent of reaction and product ratios were subsequently determined by CE. The model predicted results are shown to be in good agreement (7.1% discrepancy difference) with experimental data. The use of chemometric RSM provides a direct relationship between electrophoretic conditions and product distribution of microscale reactions using CE, thereby offering a new and versatile approach to optimizing enzymatic experimental conditions.

Determination of enzymatic activity by capillary electrophoresis

Enzymes are biological catalysts that play an important role in biochemical reactions necessary for normal growth, maturation and reproduction through whole live world. Their accurate quantitation in biological samples is important in many fields of biochemistry, not only in routine biochemistry and in fundamental research, but also in clinical and pharmacological research and diagnosis. Since the direct measurement of enzymes by masses is impossible, they must be quantified by their catalytic activities. Many different methods have been applied for this purpose so far. Although photometric methods are undoubtedly the most frequently used, separation methods will further gain their position in this field. The article reviews different possibilities for the assay of enzymatic activity by means of capillary electrophoresis (CE). Both the off-line and on-line enzyme assays based on CE are discussed.

On-line monitoring of enzymatic conversion of adenosine triphosphate to adenosine diphosphate by micellar electrokinetic chromatography

Capillary electrophoresis can be a valuable tool for the on-line monitoring of bioprocesses. The enzymatic conversion of nucleotide adenosine triphosphate (ATP) to adenosine diphosphate (ADP) by hexokinase (HK) was monitored in the bioreactor interfaced by a laboratory-built microsampler to a capillary electrophoresis unit. The use of this specially designed sampling device enabled rapid consecutive injections to be performed without high-voltage (HV) interruptions. No additional sample preparation was required. The method of micellar electrokinetic chromatography, employing reversed electroosmotic flow (EOF) by cationic surfactant and reversed polarity mode provided a good resolution and short analysis time of less than 5 min. The samples were injected electrokinetically, using -25 kV voltage for 3 s and detected by their UV absorbance at 254 nm. The analytes were detected at a microg/ml level with a reproducibility of about 7%. To demonstrate the potential of CE in understanding the processes of biological interest, such as nucleotide degradation and metabolism, the investigation of the efficiency and the time course of the enzymatic transformation was carried out.

Dual injection capillary electrophoresis: Foundations and applications

The state of the art of capillary electrophoresis (CE) approaches based on dual injection is here reported. Dual injection strategies have been proposed with three main objectives: (i) to provide information about reaction kinetics and/or related parameters, (ii) to perform in-capillary derivatization for improving separation and/or determination, (iii) to develop electrophoretic methods for the simultaneous analysis of anionic and cationic compounds. For the first two purposes, dual injection, which involves sample and reagent, can be realized either from the same end of the capillary (electrophoretically mediated microanalysis, EMMA) or from the two ends of the capillary (electroinjection analysis, EIA). The third objective, with dual injection of sample from the two ends of the capillary, takes advantage of moving cationic and anionic compounds with opposite directions. The foundations of each alternative, conditions necessary for working with them, restrictions, applications as well as perspectives are reviewed in order to establish the advantages, shortcomings, and convenience or no of their use in comparison to conventional CE.

Electrophoretically mediated microanalysis

This review describes the existing developments in the use of the capillary electrophoretic microanalytical technique for the in-line study of enzyme reaction, electrophoretically mediated microanalysis (EMMA). The article is divided into a number of parts. After an introduction, the different modes, basic principle, procedure, and some mathematical treatments of EMMA methodology are discussed and illustrated. The applications of EMMA for enzyme assay and for non-enzymatic determination are summarized into two tables. In addition to classical capillary electrophoresis (CE) instrument EMMA, special emphasis is given to a relatively new technique: EMMA on CE microchip. Finally, conclusions are drawn.

Determination of lactate or oxalate using injected lactate oxidase and peroxidase by capillary electrophoresis with UV detection

Two reactions, catalyzed by lactate oxidase (LO) and peroxidase, are initiated by a single injection of the enzymes and the substrate 2,2'-azino-bis(3-ethylene-thiazoline-6-sulfonic acid) (ABTS) into the capillary previously filled with the sample (lactate or lactate-oxalate mixture) and the run buffer containing NADH. The oxidized ABTS product upon reaction with NADH is converted to NAD(+) which is separated and detected in less than 2 min at 266 nm with a sample throughput of 7 min (including wash steps between samples). Simplex trade mark software is used to optimize the enzyme concentrations and reaction temperature. Consumption of the more expensive LO enzyme is only 1.4 x 10(-3) U per assay assuming 27 nL per injection. Linearity is established within the range from 0.0025 to 1 mM with R(2) of 0.9982. Recoveries of lactate from five spiked serum samples averaged 101%. Application of this method for the determination of oxalate as an inhibitor of LO is demonstrated.

Capillary electrophoresis as a nanoreactor of separation capability: on-capillary reaction catalyzed by transition metal ions

The catalytic oxidation of 1,2-dihydroxy-benzene-3,6-disulfonate (tiron) by metal ions has been studied for detection of the metal ions in capillary electrophoresis (CE). Although Co(2+) shows the strongest catalytic capability, some other metal ions also catalyze this reaction. If metal ions encounter a H(2)O(2 )zone after electrophoretic separation in the running buffer containing tiron, tiron is catalytically oxidized while the metal ion passes through the H(2)O(2) zone. Anionic tiron radicals produced by the reaction are finally measured by the detector; in this scheme, the capillary acts as a nano- or microreactor as well as a microseparator. The effective capillary length can be controlled by changing the interval between metal ion and H(2)O(2) injections. This scheme has been successfully applied to the detection of Co(2+), Cu(2+), Mn(2+), and VO(2+). The detectability is discussed from several viewpoints, such as the intrinsic catalyst ability of metal ions, the kinetics of the catalytic reaction, and reaction times determined by the mobility of the zone of the metal ion. Some strange behaviors, which cannot be predicted by batch experiments, are also reported.

Studies of reversible inhibition, irreversible inhibition, and activation of alkaline phosphatase by capillary electrophoresis

Reversible inhibition, irreversible inhibition, and activation of calf intestinal alkaline phosphatase (EC 3.1.3.1) have been studied by capillary electrophoresis. The capillary electrophoretic enzyme-inhibitor assays were based on electrophoretic mixing of inhibitor and enzyme zones in a substrate-filled capillary. Enzyme inhibition was indicated by a decrease in product formation detected in the capillary by laser-induced fluorescence. Reversible enzyme inhibitors could be quantified by Michaelis-Menten treatment of the electrophoretic data. Reversible, competitive inhibition of alkaline phosphatase by sodium vanadate and sodium arsenate has been examined, and reversible, noncompetitive inhibition by theophylline has been studied. The K(i) values determined for these reversible inhibitors using capillary electrophoresis are within the range of values reported in the literature for the same enzyme-inhibitor combinations. Irreversible inhibition of alkaline phosphatase by EDTA at concentrations of 1.0mM and above has been observed. Activation of alkaline phosphatase has also been observed for EDTA at concentrations from 20 to 400 microM.

Recent advances in capillary electrophoresis methods for food analysis

This review article addresses recent advances in the analysis of foods and food components by capillary electrophoresis (CE). CE has found application to a number of important areas of food analysis, including quantitative chemical analysis of food additives, biochemical analysis of protein composition, and others. The speed, resolution and simplicity of CE, combined with low operating costs, make the technique an attractive option for the development of improved methods of food analysis for the new millennium.