Advances in Smart Photovoltaic Textiles

Energy harvesting textiles have emerged as a promising solution to sustainably power wearable electronics. Textile-based solar cells (SCs) interconnected with on-body electronics have emerged to meet such needs. These technologies are lightweight, flexible, and easy to transport while leveraging the abundant natural sunlight in an eco-friendly way. In this Review, we comprehensively explore the working mechanisms, diverse types, and advanced fabrication strategies of photovoltaic textiles. Furthermore, we provide a detailed analysis of the recent progress made in various types of photovoltaic textiles, emphasizing their electrochemical performance. The focal point of this review centers on smart photovoltaic textiles for wearable electronic applications. Finally, we offer insights and perspectives on potential solutions to overcome the existing limitations of textile-based photovoltaics to promote their industrial commercialization.

Recent Advances and Challenges Toward Application of Fibers and Textiles in Integrated Photovoltaic Energy Storage Devices

Flexible microelectronic devices have seen an increasing trend toward development of miniaturized, portable, and integrated devices as wearable electronics which have the requirement for being light weight, small in dimension, and suppleness. Traditional three-dimensional (3D) and two-dimensional (2D) electronics gadgets fail to effectively comply with these necessities owing to their stiffness and large weights. Investigations have come up with a new family of one-dimensional (1D) flexible and fiber-based electronic devices (FBEDs) comprising power storage, energy-scavenging, implantable sensing, and flexible displays gadgets. However, development and manufacturing are still a challenge owing to their small radius, flexibility, low weight, weave ability and integration in textile electronics. This paper will provide a detailed review on the importance of substrates in electronic devices, intrinsic property requirements, fabrication classification and applications in energy harvesting, energy storage and other flexible electronic devices. Fiber- and textile-based electronic devices for bulk/scalable fabrications, encapsulation, and testing are reviewed and presented future research ideas to enhance the commercialization of these fiber-based electronics devices.

Fabrication of Conductive Fabrics Based on SWCNTs, MWCNTs and Graphene and Their Applications: A Review

In recent years, the field of conductive fabrics has been challenged by the increasing popularity of these materials in the production of conductive, flexible and lightweight textiles, so-called smart textiles, which make our lives easier. These electronic textiles can be used in a wide range of human applications, from medical devices to consumer products. Recently, several scientific results on smart textiles have been published, focusing on the key factors that affect the performance of smart textiles, such as the type of substrate, the type of conductive materials, and the manufacturing method to use them in the appropriate application. Smart textiles have already been fabricated from various fabrics and different conductive materials, such as metallic nanoparticles, conductive polymers, and carbon-based materials. In this review, we study the fabrication of conductive fabrics based on carbon materials, especially carbon nanotubes and graphene, which represent a growing class of high-performance materials for conductive textiles and provide them with superior electrical, thermal, and mechanical properties. Therefore, this paper comprehensively describes conductive fabrics based on single-walled carbon nanotubes, multi-walled carbon nanotubes, and graphene. The fabrication process, physical properties, and their increasing importance in the field of electronic devices are discussed.

High-Performance Triboelectric Nanogenerators Based on Commercial Textiles: Electrospun Nylon 66 Nanofibers on Silk and PVDF on Polyester

A high-performance textile triboelectric nanogenerator is developed based on the common commercial fabrics silk and polyester (PET). Electrospun nylon 66 nanofibers were used to boost the tribo-positive performance of silk, and a poly(vinylidene difluoride) (PVDF) coating was deployed to increase the tribo-negativity of PET. The modifications confer a very significant boost in performance: output voltage and short-circuit current density increased ∼17 times (5.85 to 100 V) and ∼16 times (1.6 to 24.5 mA/m²), respectively, compared with the Silk/PET baseline. The maximum power density was 280 mW/m² at a 4 MΩ resistance. The performance boost likely results from enhancing the tribo-positivity (and tribo-negativity) of the contact layers and from increased contact area facilitated by the electrospun nanofibers. Excellent stability and durability were demonstrated: the nylon nanofibers and PVDF coating provide high output, while the silk and PET substrate fabrics confer strength and flexibility. Rapid capacitor charging rates of 0.045 V/s (2 μF), 0.031 V/s (10 μF), and 0.011 V/s (22 μF) were demonstrated. Advantages include high output, a fully textile structure with excellent flexibility, and construction based on cost-effective commercial fabrics. The device is ideal as a power source for wearable electronic devices, and the approach can easily be deployed for other textiles.

Carbon-Related Materials: Graphene and Carbon Nanotubes in Semiconductor Applications and Design

As the scaling technology in the silicon-based semiconductor industry is approaching physical limits, it is necessary to search for proper materials to be utilized as alternatives for nanoscale devices and technologies. On the other hand, carbon-related nanomaterials have attracted so much attention from a vast variety of research and industry groups due to the outstanding electrical, optical, mechanical and thermal characteristics. Such materials have been used in a variety of devices in microelectronics. In particular, graphene and carbon nanotubes are extraordinarily favorable substances in the literature. Hence, investigation of carbon-related nanomaterials and nanostructures in different ranges of applications in science, technology and engineering is mandatory. This paper reviews the basics, advantages, drawbacks and investigates the recent progress and advances of such materials in micro and nanoelectronics, optoelectronics and biotechnology.

Energy Harvesting Untethered Soft Electronic Devices

Advances in wearable and stretchable electronic technologies have yielded a wide range of electronic devices that can be conformably worn by, or implanted in humans to measure physiological signals. Moreover, various cutting-edge technologies for battery-free electronic devices have led to advances in healthcare devices that can continuously measure long-term biosignals for advanced human-machine interface and clinical diagnostics. This report presents the recent progress in battery-less, wearable devices using a wide range of energy harvesting sources, such as electromagnetic energy, mechanical energy, and biofuels. Additionally, this report also discusses the principles and working mechanisms of near/far-field communications, triboelectric, thermoelectric, and biofuel technologies.

Electrically conductive cotton fabric coatings developed by silica sol-gel precursors doped with surfactant-aided dispersion of vertically aligned carbon nanotubes fillers in organic solvent-free aqueous solution

HYPOTHESIS

From the end of the twentieth century, the growing interest in a new generation of wearable electronics with attractive application for military, medical and smart textiles fields has led to a wide investigation of chemical finishes for the production of electronic textiles (e-textiles).

EXPERIMENTS

Herein, a novel method to turn insulating cotton fabrics in electrically conductive by the deposition of three-dimensional hierarchical vertically aligned carbon nanotubes (VACNT) is proposed. Two VACNT samples with different length were synthesized and then dispersed in 4-dodecylbenzenesulfonic acid combined with silica-based sol-gel precursors. The dispersed VACNT were separately compounded with a polyurethane thickener to obtain homogeneous spreadable pastes, finally coated onto cotton surfaces by the "knife-over-roll" technique.

FINDINGS

Shorter VACNT-based composite showed the best electrical conductivity, with a sheet resistance value less than 4.0 · 10⁴ ± 6.7 · 10³ Ω/sq. As demonstrated, developed e-textiles are suitable for application as humidity sensing materials in wearable smart textiles by exhibiting adequate response time for end-users and repeatability at several exposure cycles, still maintaining excellent flexibility. The proposed environmentally-friendly and cost-effective method can be easily widened to the scalable production of CNT-containing conductive flexible coatings, providing additional support to the development of real integration between electronics and textiles.

High Durability and Waterproofing rGO/SWCNT-Fabric-Based Multifunctional Sensors for Human-Motion Detection

Wearable strain-pressure sensors for detecting electrical signals generated by human activities are being widely investigated because of their diverse potential applications, from observing human motion to health monitoring. In this study, we fabricated reduced graphene oxide (rGO)/single-wall carbon nanotube (SWCNT) hybrid fabric-based strain-pressure sensors using a simple solution process. The structural and chemical properties of the rGO/SWCNT fabrics were characterized using scanning electron microscopy (SEM), Raman, and X-ray photoelectron spectroscopy (XPS). Complex networks containing rGO and SWCNTs were homogeneously formed on the cotton fabric. The sensing performance of the devices was evaluated by measuring the effects of bending strain and pressure. When the CNT content was increased, the change in relative resistance decreased, while durability was significantly improved. The rGO/SWCNT (0.04 wt %) fabric sensor showed particularly high mechanical stability and flexibility during 100 000 bending tests at the extremely small bending radius of 3.5 mm (11.6% bending strain). Moreover, the rGO/SWCNT fabric device exhibited excellent water resistant properties after 10 washing tests due to its hydrophobic nature. Finally, we demonstrated a fabric-sensor-based motion glove and confirmed its practical applicability.

Large area growth of MoTe2 films as high performance counter electrodes for dye-sensitized solar cells

A cost effective and efficient alternative counter electrode (CE) to replace commercially existing platinum (Pt)-based CEs for dye-sensitized solar cells (DSSCs) is necessary to make DSSCs competitive. Herein, we report the large-area growth of molybdenum telluride (MoTe2) thin films by sputtering-chemical vapor deposition (CVD) on conductive glass substrates for Pt-free CEs of DSSCs. Cyclic voltammetry (CV), Tafel curve analysis, and electrochemical impedance spectroscopy (EIS) results showed that the as-synthesized MoTe2 exhibited good electrocatalytic properties and a low charge transfer resistance at the electrolyte-electrode interface. The optimized MoTe2 CE revealed a high power conversion efficiency of 7.25% under a simulated solar illumination of 100 mW cm-2 (AM 1.5), which was comparable to the 8.15% observed for a DSSC with a Pt CE. The low cost and good electrocatalytic properties of MoTe2 thin films make them as an alternative CE for DSSCs.

Development of a WS2/MoTe2 heterostructure as a counter electrode for the improved performance in dye-sensitized solar cells

A facile large-area synthesis of a WS₂/MoTe₂ heterostructure via a sputtering–CVD approach on conductive glass substrates was demonstrated and, for the first time, it was used as a counter electrode (CE) for dye-sensitized solar cells (DSSCs).

A PVdF-based electrolyte membrane for a carbon counter electrode in dye-sensitized solar cells

This research demonstrates the design and operation of a dye-sensitized solar cell (DSSC) with a multi-walled carbon nanotube counter electrode (CE) and a pore-filled membrane consisting of polyvinylidene fluoride-co-hexafluoropropylene (PVdF-co-HFP) as an electrolyte.

Fabrication of a flexible and conductive lyocell fabric decorated with graphene nanosheets as a stable electrode material

Textile electrodes are highly desirable for wearable electronics as they offer light-weight, flexibility, cost effectiveness and ease of fabrication. Here, we propose the use of lyocell fabric as a flexible textile electrode because of its inherently super hydrophilic characteristics and increased moisture uptake. A highly concentrated colloidal solution of graphene oxide nanosheets (GONs) was coated on to lyocell fabric and was then reduced in to graphene nanosheets (GNs) using facile chemical reduction method. The proposed textile electrode has a very high surface conductivity with a very low value of surface resistance of only 40Ωsq(-1), importantly without use of any binding or adhesive material in the processing step. Atomic force spectroscopy (AFM) and Transmission electron microscopy (TEM) were conducted to study the topographical properties and sheet exfoliation of prepared GONs. The surface morphology, structural characterization and thermal stability of the fabricated textile electrode were studied by field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), X ray photon spectroscopy (XPS), Raman spectroscopy, Wide angle X ray diffraction spectroscopy (WAXD) and Thermogravimetric analysis (TGA) respectively. These results suggest that the GONs is effectively adhered on to the lyocell fabric and the conversion of GONs in to GNs by chemical reduction has no adverse effect on the crystalline structure of textile substrate. The prepared graphene coated conductive lyocell fabric was found stable in water and electrolyte solution and it maintained nearly same surface electrical conductivity at various bending angles. The electrical resistance results suggest that this lyocell based textile electrode (L-GNs) is a promising candidate for flexible and wearable electronics and energy harvesting devices.

A Novel Activated-Charcoal-Doped Multiwalled Carbon Nanotube Hybrid for Quasi-Solid-State Dye-Sensitized Solar Cell Outperforming Pt Electrode

Highly conductive mesoporous carbon structures based on multiwalled carbon nanotubes (MWCNTs) and activated charcoal (AC) were synthesized by an enzymatic dispersion method. The synthesized carbon configuration consists of synchronized structures of highly conductive MWCNT and porous activated charcoal morphology. The proposed carbon structure was used as counter electrode (CE) for quasi-solid-state dye-sensitized solar cells (DSSCs). The AC-doped MWCNT hybrid showed much enhanced electrocatalytic activity (ECA) toward polymer gel electrolyte and revealed a charge transfer resistance (RCT) of 0.60 Ω, demonstrating a fast electron transport mechanism. The exceptional electrocatalytic activity and high conductivity of the AC-doped MWCNT hybrid CE are associated with its synchronized features of high surface area and electronic conductivity, which produces higher interfacial reaction with the quasi-solid electrolyte. Morphological studies confirm the forms of amorphous and conductive 3D carbon structure with high density of CNT colloid. The excessive oxygen surface groups and defect-rich structure can entrap an excessive volume of quasi-solid electrolyte and locate multiple sites for iodide/triiodide catalytic reaction. The resultant D719 DSSC composed of this novel hybrid CE fabricated with polymer gel electrolyte demonstrated an efficiency of 10.05% with a high fill factor (83%), outperforming the Pt electrode. Such facile synthesis of CE together with low cost and sustainability supports the proposed DSSCs' structure to stand out as an efficient next-generation photovoltaic device.

Functional nanostructures for enzyme based biosensors: properties, fabrication and applications

A review describing functional nanostructures for portable and printable enzyme biosensors. Specific physicochemical and surface properties of nanoparticles used as carriers and sensing components and their assembly are discussed with an overview of current and emerging techniques enabling large scale roll-to-roll fabrication and miniaturization. Their integration in flexible, wearable and inexpensive point-of-use devices, and implementation challenges are also provided with examples of applications.