Electrocatalytic conversion of CO2 to produce solar fuels in electrolyte or electrolyte-less configurations of PEC cells

Designing Surface and Interface Structures of Copper-Based Catalysts for Enhanced Electrochemical Reduction of CO2 to Alcohols

Electrochemical CO2 reduction (ECR) has emerged as a promising solution to address both the greenhouse effect caused by CO2 emissions and the energy shortage resulting from the depletion of nonrenewable fossil fuels. The production of multicarbon (C2+) products via ECR, especially high-energy-density alcohols, is highly desirable for industrial applications. Copper (Cu) is the only metal that produces alcohols with appreciable efficiency and kinetic viability in aqueous solutions. However, poor product selectivity is the main technical problem for applying the ECR technology in alcohol production. Extensive research has resulted in the rational design of electrocatalyst architectures using various strategies. This design significantly affects the adsorption energetics of intermediates and the reaction pathways for alcohol production. In this review, we focus on the design of effective catalysts for ECR to alcohols, discussing fundamental principles, innovative strategies, and mechanism understanding. Furthermore, the challenges and prospects in utilizing Cu-based materials for alcohol production via ECR are discussed.

Catalysis for e-Chemistry: Need and Gaps for a Future De-Fossilized Chemical Production, with Focus on the Role of Complex (Direct) Syntheses by Electrocatalysis

The prospects, needs and limits in current approaches in catalysis to accelerate the transition to e-chemistry, where this term indicates a fossil fuel-free chemical production, are discussed. It is suggested that e-chemistry is a necessary element of the transformation to meet the targets of net zero emissions by year 2050 and that this conversion from the current petrochemistry is feasible. However, the acceleration of the development of catalytic technologies based on the use of renewable energy sources (indicated as reactive catalysis) is necessary, evidencing that these are part of a system of changes and thus should be assessed from this perspective. However, it is perceived that the current studies in the area are not properly addressing the needs to develop the catalytic technologies required for e-chemistry, presenting a series of relevant aspects and directions in which research should be focused to develop the framework system transformation necessary to implement e-chemistry.

Nanostructured Copper-Based Electrodes Electrochemically Synthesized on a Carbonaceous Gas Diffusion Membrane with Catalytic Activity for the Electroreduction of CO2

In this work, four different 4 cm2-sized nanostructured Cu-based electrocatalysts have been designed by a one-step electrodeposition process of Cu metal on a three-dimensional carbonaceous membrane. One consisted of Cu0, and the other three were obtained by further simple oxidative treatments. Morphological, structural, and electrochemical investigations on the four materials were carried out by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, linear sweep voltammetry, and potential-controlled electrolysis. All the electrocatalysts showed promising catalytic activities toward CO2 electroreduction in liquid phase, with a remarkable selectivity toward acetic acid achieved when using the oxidized materials. In particular, the best electrocatalytic activity was observed for the Cu2O-Cu0 catalyst, working at a relatively low potential (-0.4 V vs RHE), which exhibited a stable and low current density of 0.46 mA cm-2 and a productivity of 308 μmol gcat-1 h-1. These results were attributed to the nanostructured morphology that is characterized by many void spaces and by a high surface area, which should guarantee a large number of CuI and Cu0 catalytic active sites. Moreover, kinetic analyses and preliminary studies about catalyst regeneration highlighted the stability of the best-performing catalyst.

An enhanced electrochemical CO2 reduction reaction on the SnOx–PdO surface of SnPd nanoparticles decorated on N-doped carbon fibers

Electrochemical reduction of CO₂ to formate on SnPd–NCF. The adsorbed bicarbonate ion promotes the protonation of CO₂˙⁻ to HCO₂⁻.

Comparing Molecular Mechanisms in Solar NH3 Production and Relations with CO2 Reduction

Molecular mechanisms for N2 fixation (solar NH3) and CO2 conversion to C2+ products in enzymatic conversion (nitrogenase), electrocatalysis, metal complexes and plasma catalysis are analyzed and compared. It is evidenced that differently from what is present in thermal and plasma catalysis, the electrocatalytic path requires not only the direct coordination and hydrogenation of undissociated N2 molecules, but it is necessary to realize features present in the nitrogenase mechanism. There is the need for (i) a multi-electron and -proton simultaneous transfer, not as sequential steps, (ii) forming bridging metal hydride species, (iii) generating intermediates stabilized by bridging multiple metal atoms and (iv) the capability of the same sites to be effective both in N2 fixation and in COx reduction to C2+ products. Only iron oxide/hydroxide stabilized at defective sites of nanocarbons was found to have these features. This comparison of the molecular mechanisms in solar NH3 production and CO2 reduction is proposed to be a source of inspiration to develop the next generation electrocatalysts to address the challenging transition to future sustainable energy and chemistry beyond fossil fuels.

CO2 Reduction of Hybrid Cu2 O-Cu/Gas Diffusion Layer Electrodes and their Integration in a Cu-based Photoelectrocatalytic Cell

Cu₂ O/gas diffusion layer (GDL) electrodes prepared by electrodeposition were studied for the electrocatalytic reduction of CO₂ . The designed electrode was also tested in solar-light-induced CO₂ conversion in combination with a CuO/NtTiO₂ photoanode using a compact photoelectrocatalytic (PEC) cell. Both PEC cell electrodes were prepared using non-critical raw materials and low cost, easily scalable procedures. In the PEC experiments, a total carbon faradaic selectivity of about 90 % to formate and about 75 % to acetate was obtained after 24 h of operations without application of potential/current or using sacrificial agents. In electrocatalytic tests of CO₂ reduction at -1.5 V, the same electrode yielded high total faradaic selectivity (>95 %) but formed selectively formate (about 80 % selectivity) rather than acetate. The in situ transformation of the Cu₂ O/GDL electrode leads to the formation of a hybrid Cu₂ O-Cu/GDL system. Cyclic voltammetry data indicate that the potential and the presence of CO₂ (not only of HCO₃ ^- species) are both important elements in this transformation. Data also indicate that the surface concentration of CO₂ (or of its products of transformation) on the electrode is an important factor to determine performance in the conversion of CO₂ .

Electrochemical reduction of CO2 on graphene supported transition metals - towards single atom catalysts

In this study, we have investigated the use of single metal atoms supported on defective graphene as catalysts for the electrochemical reduction of CO₂ using the first-principles approach and the computational hydrogen electrode model. Reaction pathways to produce a variety of C₁ products CO, HCOOH, HCHO, CH₃OH and CH₄ have been studied in detail for five representative transition metals Ag, Cu, Pd, Pt, and Co. Different pathways were revealed in contrast to those found for metallic crystalline surfaces and nanoparticles. These single atom catalysts have demonstrated a general improvement in rate limiting potentials to generate C₁ hydrocarbons. They also show distinct differences in terms of their efficiency and selectivity in CO₂ reduction, which can be correlated with their elemental properties as a function of their group number in the periodic table. Six best candidates for CH₄ production are identified by conducting computational screening of 28 d-block transition metals. Ag has the lowest overpotential (0.73 V), and is followed by Zn, Ni, Pd, Pt and Ru with overpotentials all below 1 V. Cu in the supported single atom form shows a strong preference towards producing CH₃OH with an overpotential of 0.68 V well below the value of 1.04 V for producing CH₄.

Enhanced formation of >C1 Products in Electroreduction of CO2 by Adding a CO2 Adsorption Component to a Gas-Diffusion Layer-Type Catalytic Electrode

The addition of a CO₂ -adsorption component (substituted imidazolate-based SIM-1 crystals) to a gas-diffusion layer-type catalytic electrode enhances the activity and especially the selectivity towards >C1 carbon chain products (ethanol, acetone, and isopropanol) of a Pt-based electrocatalyst that is not able to form products of CO₂ reduction involving C-C bond formation under conventional (liquid-phase) conditions. This indicates that the increase of the effective CO₂ concentration at the electrode active surface is the factor controlling the formation of >C1 products rather than only the intrinsic properties of the electrocatalyst.

Turning Perspective in Photoelectrocatalytic Cells for Solar Fuels

The development of new devices for the use and storage of solar energy is a key step to enable a new sustainable energy scenario. The route for direct solar-to-chemical energy transformation, especially to produce liquid fuels, represents a necessary element to realize transition from the actual energy infrastructure. Photoelectrocatalytic (PECa) devices for the production of solar fuels are a key element to enable this sustainable scenario. The development of PECa devices and related materials is of increasing scientific and applied interest. This concept paper introduces the need to turn the viewpoint of research in terms of PECa cell design and related materials with respect to mainstream activities in the field of artificial photosynthesis and leaves. As an example of a new possible direction, the concept of electrolyte-less cell design for PECa cells to produce solar fuels by reduction of CO2 is presented. The fundamental and applied development of new materials and electrodes for these cells should proceed fully integrated with PECa cell design and systematic analysis. A new possible approach to develop semiconductors with improved performances by using visible light is also shortly presented.

Electrochemical behaviour of naked sub-nanometre sized copper clusters and effect of CO2

In size-controlled naked Cu₅ and Cu₂₀ nanoclusters the latter show anodic redox processes occurring at much lower potential with respect to Cu₅, but the latter coordinate effectively CO₂ and allow to reduce CO₂ under cathodic conditions at lower overpotential.