Design of fluorinated stealth poly(ε-caprolactone) nanocarriers

The covalent functionalization of polymers with fluorinated moieties represents a promising strategy for the development of multimodal systems. Moreover, polymer fluorination often endows the resulting nanocarriers with improved colloidal stability in the biological environment. In this work, we developed fluorinated pegylated (PEG) biodegradable poly(ε-caprolactone) (PCL) drug nanocarriers showing both high colloidal stability and stealth properties, as well as being (19F)-Nuclear Magnetic Resonance (NMR) detectable. The optimized nanocarriers were obtained mixing a PEG-PCL block copolymer with a nonafluoro-functionalized PCL polymer. The role of PEGylation and fluorination on self-assembly and colloidal behavior of the obtained nanoparticles (NPs) was investigated, as well as their respective role on stealth properties and colloidal stability. To prove the feasibility of the developed NPs as potential 19F NMR detectable drug delivery systems, a hydrophobic drug was successfully encapsulated, and the maintenance of the relevant 19F NMR properties evaluated. Drug-loaded fluorinated NPs still retained a sharp and intense 19F NMR signal and good relaxivity parameters (i.e., T1 and T2 relaxation times) in water, which were not impaired by drug encapsulation.

Perfluoro-tert-butyl Group-Derived Capmatinib: Synthesis, Biological Evaluation and Its Application in 19 F Magnetic Resonance Imaging

Capmatinib is an FDA-approved drug to treat metastatic non-small cell lung cancer with MET-exon 14 skipping. Herein, the perfluoro-tert-butyl group, which possesses nine chemically identical fluorine atoms, was introduced on Capmatinib to afford a targeted 19 F magnetic resonance imaging (MRI) probe, perfluoro-tert-butyl group-derived Capmatinib (9F-CAP). The 19 F MRI concentration limit was found to be 25 mM in FLASH sequence. Molecular docking simulation, surface plasmon resonance (SPR) (with a Kd of 40.7 μM), half-inhibitory concentration (with a IC50 of 168 nM), Annexin V, and cytotoxicity assays jointly demonstrated that the 9F-CAP targeted cMET protein specifically. Therefore, the targeted imaging capability of 9F-CAP is of great significance for the preoperative diagnosis of specific cancers.

Recent Research Progress of 19 F Magnetic Resonance Imaging Probes: Principle, Design, and Their Application

Visualization of biomolecules, cells, and tissues, as well as metabolic processes in vivo is significant for studying the associated biological activities. Fluorine magnetic resonance imaging (19 F MRI) holds potential among various imaging technologies thanks to its negligible background signal and deep tissue penetration in vivo. To achieve detection on the targets with high resolution and accuracy, requirements of high-performance 19 F MRI probes are demanding. An ideal 19 F MRI probe is thought to have, first, fluorine tags with magnetically equivalent 19 F nuclei, second, high fluorine content, third, adequate fluorine nuclei mobility, as well as excellent water solubility or dispersity, but not limited to. This review summarizes the research progresses of 19 F MRI probes and mainly discusses the impacts of structures on in vitro and in vivo imaging performances. Additionally, the applications of 19 F MRI probes in ions sensing, molecular structures analysis, cells tracking, and in vivo diagnosis of disease lesions are also covered in this article. From authors' perspectives, this review is able to provide inspirations for relevant researchers on designing and synthesizing advanced 19 F MRI probes.

Cross-linkable star-hyperbranched unimolecular micelles for the enhancement of the anticancer activity of clotrimazole

Clotrimazole, a hydrophobic drug routinely used in the treatment of vaginal candidiasis, also shows antitumor activity. However, its use in chemotherapy has been unsuccessful to date due to its low solubility in aqueous media. In this work, new unimolecular micelles based on polyether star-hyperbranched carriers of clotrimazole are presented that can enhance solubility, and consequently the bioavailability, of clotrimazole in water. The amphiphilic constructs consisting of a hydrophobic poly(n-alkyl epoxide) core and hydrophilic corona of hyperbranched polyglycidol were synthesized in a three-step anionic ring-opening polymerization of epoxy monomers. The synthesis of such copolymers, however, was only possible by incorporating a linker to facilitate the elongation of the hydrophobic core with glycidol. Unimolecular micelles-clotrimazole formulations displayed significantly increased activity against human cervical cancer HeLa cells compared to the free drug, along with a weak effect on the viability of the normal dermal microvascular endothelium cells HMEC1. This selective activity of clotrimazole on cancer cells with little effect on normal cells was a result of the fact that clotrimazole targets the Warburg effect in cancer cells. Flow cytometric analysis revealed that the encapsulated clotrimazole significantly blocks the progression of the HeLa cycle in the G0/G1 phase and induces apoptosis. In addition, the ability of the synthesized amphiphilic constructs to form a dynamic hydrogel was demonstrated. Such a gel facilitates the delivery of drug-loaded single-molecule micelles to the affected area, where they can form a continuous, self-healing layer.

Nanotechnology as a Versatile Tool for 19F-MRI Agent’s Formulation: A Glimpse into the Use of Perfluorinated and Fluorinated Compounds in Nanoparticles

Simultaneously being a non-radiative and non-invasive technique makes magnetic resonance imaging (MRI) one of the highly sought imaging techniques for the early diagnosis and treatment of diseases. Despite more than four decades of research on finding a suitable imaging agent from fluorine for clinical applications, it still lingers as a challenge to get the regulatory approval compared to its hydrogen counterpart. The pertinent hurdle is the simultaneous intrinsic hydrophobicity and lipophobicity of fluorine and its derivatives that make them insoluble in any liquids, strongly limiting their application in areas such as targeted delivery. A blossoming technique to circumvent the unfavorable physicochemical characteristics of perfluorocarbon compounds (PFCs) and guarantee a high local concentration of fluorine in the desired body part is to encapsulate them in nanosystems. In this review, we will be emphasizing different types of nanocarrier systems studied to encapsulate various PFCs and fluorinated compounds, headway to be applied as a contrast agent (CA) in fluorine-19 MRI (¹⁹F MRI). We would also scrutinize, especially from studies over the last decade, the different types of PFCs and their specific applications and limitations concerning the nanoparticle (NP) system used to encapsulate them. A critical evaluation for future opportunities would be speculated.

Acrylate and Methacrylate Polymers' Applications: Second Life with Inexpensive and Sustainable Recycling Approaches

Polymers are widely employed in several fields thanks to their wide versatility and the easy derivatization routes. However, a wide range of commercial polymers suffer from limited use on a large scale due to their inert nature. Nowadays, acrylate and methacrylate polymers, which are respectively derivatives of acrylic or methacrylic acid, are among the most proposed materials for their useful characteristics like good biocompatibility, capping ability toward metal clusters, low price, potentially recyclability and reusability. Here, we discuss the advantages and challenges of this class of smart polymers focusing our attention on their current technological applications in medical, electronic, food packaging and environmental remediation fields. Furthermore, we deal with the main issue of their recyclability, considering that the current commercial bioplastics are not yet able to meet the global needs as much as to totally replace fossil-fuel-based products. Finally, the most accredited strategies to reach recyclable composites based on acrylic polymers are described.

Intermolecular Forces Driving Hexamethylenetetramine Co-Crystal Formation, a DFT and XRD Analysis

Interest in co-crystals formation has been constantly growing since their discovery, almost a century ago. Such success is due to the ability to tune the physical-chemical properties of the components in solid state by avoiding a change in their molecular structure. The properties influenced by the co-crystals formation range from an improvement of mechanical features and chemical stability to different solubility. In the scientific research area, the pharmacological field is undoubtedly one of those in which an expansion of the co-crystal knowledge can offer wide benefits. In this work, we described the crystalline structure of hexamethylenetetramine co-crystallized with the isophthalic acid, and we compared it with another co-crystal, showing the same components but different stoichiometry. To give a wider overview on the nature of the interactions behind the observed crystal packing and to rationalize the reasons of its formation, a computational analysis on such structures was carried out.

Weibull Modeling of Controlled Drug Release from Ag-PMA Nanosystems

Traditional pharmacotherapy suffers from multiple drawbacks that hamper patient treatment such as antibiotic resistances or low drug selectivity and toxicity during systemic applications. Some functional hybrid nanomaterials are designed to handle the drug release process under remote-control. More attention has recently been paid to synthetic polyelectrolytes for their intrinsic properties which allow them to rearrange into compact structures, ideal to be used as drug carriers or probes influencing biochemical processes. The presence of Ag nanoparticles (NPs) in the Poly methyl acrylate (PMA) matrix leads to an enhancement of drug release efficiency, even using a low-power laser whose wavelength is far from the Ag Surface Plasmon Resonance (SPR) peak. Further, compared to the colloids, the nanofiber-based drug delivery system has shown shorter response time and more precise control over the release rate. The efficiency and timing of involved drug release mechanisms has been estimated by the Weibull distribution function, whose parameters indicate that the release mechanism of nanofibers obeys Fick's first law while a non-Fickian character controlled by diffusion and relaxation of polymer chains occurs in the colloidal phase.

Fluorine Labeling of Nanoparticles and In Vivo 19F Magnetic Resonance Imaging

Fluorinated nanoparticles have increasing applications, but they are still challenging to prepare, especially in the case of water-soluble fluorinated nanoparticles. Herein, a fluorine labeling strategy is presented that is based on the conjugation of custom-made small fluorinated building blocks, obtained by simple synthetic transformations, with carboxylated gold nanoparticles through a convenient phase-transfer process. The synthesis of four fluorinated building blocks with different chemical shifts in ¹⁹F nuclear magnetic resonance and varied functionalities is reported, along with their conjugation onto nanoparticles. Fluorinated nanoparticles of small core size obtained by this conjugation methodology and by direct synthesis presented high transverse relaxation times (T₂) ranging from 518 to 1030 ms, and a large number of equivalent fluorine atoms per nanoparticle (340-1260 fluorine atoms), which made them potential candidates for ¹⁹F magnetic resonance related applications. Finally, nontargeted fluorinated nanoparticles were probed by performing in vivo ¹⁹F magnetic resonance spectroscopy (¹⁹F MRS) in mice. Nanoparticles were detected at both 1 and 2 h after being injected. ¹⁹F MRI images were also acquired after either intravenous or subcutaneous injection. Their fate was studied by analyzing the gold content in tissues by ICP-MS. Thus, the present work provides a general fluorination strategy for nanoparticles and shows the potential use of small fluorinated nanoparticles in magnetic-resonance-related applications.

Efficient temperature-feedback liposome for 19F MRI signal enhancement

A new non-encapsulated fluorinated liposome (TSL) was developed, which showed instantaneous temperature-induced 19F MR signal enhancement and excellent stability under reversible signal transition at different conditions.

Recent advances in development of dendritic polymer-based nanomedicines for cancer diagnosis

Dendritic polymers have highly branched three-dimensional architectures, the fourth type apart from linear, cross-linked, and branched one. They possess not only a large number of terminal functional units and interior cavities, but also a low viscosity with weak or no entanglement. These features endow them with great potential in various biomedicine applications, including drug delivery, gene therapy, tissue engineering, immunoassay and bioimaging. Most review articles related to bio-related applications of dendritic polymers focus on their drug or gene delivery, while very few of them are devoted to their function as cancer diagnosis agents, which are essential for cancer treatment. In this review, we will provide comprehensive insights into various dendritic polymer-based cancer diagnosis agents. Their classification and preparation are presented for readers to have a precise understanding of dendritic polymers. On account of physical/chemical properties of dendritic polymers and biological properties of cancer, we will suggest a few design strategies for constructing dendritic polymer-based diagnosis agents, such as active or passive targeting strategies, imaging reporters-incorporating strategies, and/or internal stimuli-responsive degradable/enhanced imaging strategies. Their recent applications in in vitro diagnosis of cancer cells or exosomes and in vivo diagnosis of primary and metastasis tumor sites with the aid of single/multiple imaging modalities will be discussed in great detail. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Diagnostic Tools > in vivo Nanodiagnostics and Imaging Diagnostic Tools > in vitro Nanoparticle-Based Sensing.

Nafion-Based Nanocarriers for Fluorine Magnetic Resonance Imaging

The aim of our study was to develop a novel method for nanocarriers' preparation as a fluorine magnetic resonance imaging (¹⁹F MRI)-detectable drug delivery system. The novelty of the proposed approach is based on the application of fluorinated polyelectrolyte Nafion as a contrast agent since typical MRI contrast agents are based on paramagnetic gadolinium or ferro/superparamagnetic iron oxide compounds. An advantage of using an ¹⁹F-based tracer comes from the fact that the ¹⁹F image is detected at a different resonance frequency than the ¹H image. In addition, the close to zero natural concentration of ¹⁹F nuclei in the human body makes fluorine atoms a promising MRI marker without any natural background signal. That creates the opportunity to localize and identify only exogenous fluorinated compounds with 100% specificity. The nanocarriers were formed by the deposition of polyelectrolytes on nanoemulsion droplets via the layer-by-layer technique with the saturation approach. The polyelectrolyte multilayer shell was composed of Nafion, the fluorinated ionic polymer used for labeling by ¹⁹F nuclei, and poly-l-lysine (PLL). The surface of such prepared nanocarriers was further pegylated by adsorption of pegylated polyanion, poly-l-glutamic acid (PGA). The ¹⁹F MRI-detectable hydrophobic nanocarriers with an average size of 170 nm and a sufficient signal-to-noise ratio have been developed and optimized to be used for passive tumor targeting and drug delivery.

Dendrimer Dynamics: A Review of Analytical Theories and Molecular Simulation Methods

The theoretical study of dendrimers is reviewed, considering both analytical approaches and molecular simulation methods. We discuss the effect of molecular symmetry on the degeneracy of the relaxation times, and then the calculation of observable quantities, in particular the intrinsic viscosity, and then the viscoelastic complex modulus and the dynamic structure factor, in comparison with the available experimental data. In particular, the maximum intrinsic viscosity with increasing molar mass is analyzed in some detail. The approximations and/or assumptions of the adopted methods are also described in connection with analogous results for polymer of a different topology, in particular linear and star polymers.