The carboxyl terminus of the bacteriophage T4 DNA polymerase contacts its sliding clamp at the subunit interface

Replication clamps and clamp loaders

To achieve the high degree of processivity required for DNA replication, DNA polymerases associate with ring-shaped sliding clamps that encircle the template DNA and slide freely along it. The closed circular structure of sliding clamps necessitates an enzyme-catalyzed mechanism, which not only opens them for assembly and closes them around DNA, but specifically targets them to sites where DNA synthesis is initiated and orients them correctly for replication. Such a feat is performed by multisubunit complexes known as clamp loaders, which use ATP to open sliding clamp rings and place them around the 3' end of primer-template (PT) junctions. Here we discuss the structure and composition of sliding clamps and clamp loaders from the three domains of life as well as T4 bacteriophage, and provide our current understanding of the clamp-loading process.

How a holoenzyme for DNA replication is formed

Loading of the phage T4 sliding clamp gp45 by the gp44/62 clamp loader onto DNA to form the holoenzyme and their disassembly pathways were investigated using FRET-based single-molecule and ensemble kinetic studies. gp44/62-mediated assembly of gp45 onto the DNA involves a rate-limiting conformational rearrangement of the gp45-gp44/62-DNA complex. Single-molecule measurements revealed the intermediates in gp45 loading and their interconversion, suggesting that the assembly is not concerted but is broken down into many small kinetic steps. Two populations of the gp45-gp44/62-DNA complex are formed on the end-blocked DNA that are poised to form the holoenzyme with the polymerase. In the absence of a polymerase, the two clamp populations dissociated from the DNA along with gp44/62 with distinct rates. In the presence of polymerase, holoenzyme assembly involved the recruitment of the polymerase to the gp45-gp44/62-DNA complex mediated by the chaperoning activity of gp44/62. This transient multiprotein complex then decomposed through an ATP hydrolysis-dependent exit of gp44/62 leaving the holoenzyme on DNA. The rate of dissociation of the holoenzyme from the DNA is sensitive to whether the DNA ends are blocked, underscoring its mobility on the DNA.

Motors, switches, and contacts in the replisome

Replisomes are the protein assemblies that replicate DNA. They function as molecular motors to catalyze template-mediated polymerization of nucleotides, unwinding of DNA, the synthesis of RNA primers, and the assembly of proteins on DNA. The replisome of bacteriophage T7 contains a minimum of proteins, thus facilitating its study. This review describes the molecular motors and coordination of their activities, with emphasis on the T7 replisome. Nucleotide selection, movement of the polymerase, binding of the processivity factor, unwinding of DNA, and RNA primer synthesis all require conformational changes and protein contacts. Lagging-strand synthesis is mediated via a replication loop whose formation and resolution is dictated by switches to yield Okazaki fragments of discrete size. Both strands are synthesized at identical rates, controlled by a molecular brake that halts leading-strand synthesis during primer synthesis. The helicase serves as a reservoir for polymerases that can initiate DNA synthesis at the replication fork. We comment on the differences in other systems where applicable.

Dissection of the bacteriophage T4 late promoter complex

Activated transcription of the bacteriophage T4 late genes is generated by a mechanism that stands apart from the common modalities of transcriptional regulation: the activator is gp45, the viral replisome's sliding clamp; two sliding-clamp-binding proteins, gp33 and gp55, replace the host RNA polymerase (RNAP) sigma subunit. We have mutagenized, reconfigured and selectively disrupted individual interactions of the sliding clamp with gp33 and gp55 and have monitored effects on transcription. The C-terminal sliding-clamp-binding epitopes of gp33 and gp55 are perfectly interchangeable, but the functions of these two RNAP-sliding clamp connections differ: only the gp33-gp45 linkage is essential for activation, while loss of the gp55-gp45 linkage impairs but does not abolish activation. Formation of transcription-ready promoter complexes by the sliding-clamp-activated wild-type T4 RNAP resists competition by high concentrations of the polyanion heparin. This avid formation of promoter complexes requires both linkages of the T4 late RNAP to the sliding clamp. Preopening the promoter compensates for loss of the gp55-gp45 but not the gp33-gp45 linkage. We interpret the relationship of these findings and our prior analysis to the common model of transcriptional initiation in bacteria in terms of two parallel pathways, with two RNAP holoenzymes and two DNA templates: (1) gp55-RNAP and the T4 late promoter execute basal transcription; (2) gp55-gp33-RNAP and the T4 late promoter with its mobile enhancer, the T4 sliding clamp, execute activated transcription. gp55 and gp33 perform sigma-like functions, gp55 in promoter recognition and gp33 (as well as gp55) in enhancer recognition. gp33 operates the switch between these two pathways by repressing basal transcription.

Dynamics of loading the Escherichia coli DNA polymerase processivity clamp

Sliding clamps and clamp loaders are processivity factors required for efficient DNA replication. Sliding clamps are ring-shaped complexes that tether DNA polymerases to DNA to increase the processivity of synthesis. Clamp loaders assemble these ring-shaped clamps onto DNA in an ATP-dependent reaction. The overall process of clamp loading is dynamic in that protein-protein and protein-DNA interactions must actively change in a coordinated fashion to complete the mechanical clamp-loading reaction cycle. The clamp loader must initially have a high affinity for both the clamp and DNA to bring these macromolecules together, but then must release the clamp on DNA for synthesis to begin. Evidence is presented for a mechanism in which the clamp-loading reaction comprises a series of binding reactions to ATP, the clamp, DNA, and ADP, each of which promotes some change in the conformation of the clamp loader that alters interactions with the next component of the pathway. These changes in interactions must be rapid enough to allow the clamp loader to keep pace with replication fork movement. This review focuses on the measurement of dynamic and transient interactions required to assemble the Escherichia coli sliding clamp on DNA.

Site-directed mutations of T4 helicase loading protein (gp59) reveal multiple modes of DNA polymerase inhibition and the mechanism of unlocking by gp41 helicase

The T4 helicase loading protein (gp59) interacts with a multitude of DNA replication proteins. In an effort to determine the functional consequences of these protein-protein interactions, point mutations were introduced into the gp59 protein. Mutations were chosen based on the available crystal structure and focused on hydrophobic residues with a high degree of solvent accessibility. Characterization of the mutant proteins revealed a single mutation, Y122A, which is defective in polymerase binding and has weakened affinity for the helicase. The interaction between single-stranded DNA-binding protein and Y122A is unaffected, as is the affinity of Y122A for DNA substrates. When standard concentrations of helicase are employed, Y122A is unable to productively load the helicase onto forked DNA substrates. As a result of the loss of polymerase binding, Y122A cannot inhibit the polymerase during nucleotide idling or prevent it from removing the primer strand of a D-loop. However, Y122A is capable of inhibiting strand displacement synthesis by polymerase. The retention of strand displacement inhibition by Y122A, even in the absence of a gp59-polymerase interaction, indicates that there are two modes of polymerase inhibition by gp59. Inhibition of the polymerase activity only requires gp59 to bind to the replication fork, whereas inhibition of the exonuclease activity requires an interaction between the polymerase and gp59. The inability of Y122A to interact with both the polymerase and the helicase suggests a mechanism for polymerase unlocking by the helicase based on a direct competition between the helicase and polymerase for an overlapping binding site on gp59.

Maturation of bacteriophage T4 lagging strand fragments depends on interaction of T4 RNase H with T4 32 protein rather than the T4 gene 45 clamp

In the bacteriophage T4 DNA replication system, T4 RNase H removes the RNA primers and some adjacent DNA before the lagging strand fragments are ligated. This 5'-nuclease has strong structural and functional similarity to the FEN1 nuclease family. We have shown previously that T4 32 protein binds DNA behind the nuclease and increases its processivity. Here we show that T4 RNase H with a C-terminal deletion (residues 278-305) retains its exonuclease activity but is no longer affected by 32 protein. T4 gene 45 replication clamp stimulates T4 RNase H on nicked or gapped substrates, where it can be loaded behind the nuclease, but does not increase its processivity. An N-terminal deletion (residues 2-10) of a conserved clamp interaction motif eliminates stimulation by the clamp. In the crystal structure of T4 RNase H, the binding sites for the clamp at the N terminus and for 32 protein at the C terminus are located close together, away from the catalytic site of the enzyme. By using mutant T4 RNase H with deletions in the binding site for either the clamp or 32 protein, we show that it is the interaction of T4 RNase H with 32 protein, rather than the clamp, that most affects the maturation of lagging strand fragments in the T4 replication system in vitro and T4 phage production in vivo.

The bacteriophage T4 late-transcription coactivator gp33 binds the flap domain of Escherichia coli RNA polymerase

Transcription of bacteriophage T4 late genes requires concomitant DNA replication. T4 late promoters, which consist of a single 8-bp -10 motif, are recognized by a holoenzyme containing Escherichia coli RNA polymerase core and the T4-encoded promoter specificity subunit, gp55. Initiation of transcription at these promoters by gp55-holoenzyme is inefficient, but is greatly activated by the DNA-loaded DNA polymerase sliding clamp, gp45, and the coactivator, gp33. We report that gp33 attaches to the flap domain of the Escherichia coli RNA polymerase beta-subunit and that this interaction is essential for activation. The beta-flap also mediates recognition of -35 promoter motifs by binding to sigma(70) domain 4. The results suggest that gp33 is an analogue of sigma(70) domain 4 and that gp55 and gp33 together constitute two parts of the T4 late sigma. We propose a model for the role of the gp45 sliding clamp in activation of T4 late-gene transcription.

The dynamic processivity of the T4 DNA polymerase during replication

The polymerase (gp43) processivity during T4 replisome mediated DNA replication has been investigated. The size of the Okazaki fragments remains constant over a wide range of polymerase concentrations. A dissociation rate constant of approximately 0.0013 sec(-1) was measured for the polymerases from both strands, consistent with highly processive replication on both the leading and lagging strands. This processive replication, however, can be disrupted by a catalytically inactive mutant D408N gp43 that retains normal affinity for DNA and the clamp. The inhibition kinetics fit well to an active exchange model in which the mutant polymerase (the polymerase trap) displaces the replicating polymerase. This kinetic model was further strengthened by the observation that the sizes of both the Okazaki fragments and the extension products on a primed M13mp18 template were reduced in the presence of the mutant polymerase. The effects of the trap polymerase therefore suggest a dynamic processivity of the polymerase during replication, namely, a solution/replisome polymerase exchange takes place without affecting continued DNA synthesis. This process mimics the polymerase switching recently suggested during the translesion DNA synthesis, implies the multiple functions of the clamp in replication, and may play a potential role in overcoming the replication barriers by the T4 replisome.

Dissociative Properties of the Proteins within the Bacteriophage T4 Replisome

DNA replication is a highly processive and efficient process that involves the coordination of at least eight proteins to form the replisome in bacteriophage T4. Replication of DNA occurs in the 5' to 3' direction resulting in continuous replication on the leading strand and discontinuous replication on the lagging strand. A key question is how a continuous and discontinuous replication process is coordinated. One solution is to avoid having the completion of one Okazaki fragment to signal the start of the next but instead to have a key step such as priming proceed in parallel to lagging strand replication. Such a mechanism requires protein elements of the replisome to readily dissociate during the replication process. Protein trapping experiments were performed to test for dissociation of the clamp loader and primase from an active replisome in vitro whose template was both a small synthetic DNA minicircle and a larger DNA substrate. The primase, clamp, and clamp loader are found to dissociate from the replisome and are continuously recruited from solution. The effect of varying protein concentrations (dilution) on the size of Okazaki fragments supported the protein trapping results. These findings are in accord with previous results for the accessory proteins but, importantly now, identify the primase as dissociating from an active replisome. The recruitment of the primase from solution during DNA synthesis has also been found for Escherichia coli but not bacteriophage T7. The implications of these results for RNA priming and extension during the repetitive synthesis of Okazaki fragments are discussed.

Bacteriophage T4 genome

Phage T4 has provided countless contributions to the paradigms of genetics and biochemistry. Its complete genome sequence of 168,903 bp encodes about 300 gene products. T4 biology and its genomic sequence provide the best-understood model for modern functional genomics and proteomics. Variations on gene expression, including overlapping genes, internal translation initiation, spliced genes, translational bypassing, and RNA processing, alert us to the caveats of purely computational methods. The T4 transcriptional pattern reflects its dependence on the host RNA polymerase and the use of phage-encoded proteins that sequentially modify RNA polymerase; transcriptional activator proteins, a phage sigma factor, anti-sigma, and sigma decoy proteins also act to specify early, middle, and late promoter recognition. Posttranscriptional controls by T4 provide excellent systems for the study of RNA-dependent processes, particularly at the structural level. The redundancy of DNA replication and recombination systems of T4 reveals how phage and other genomes are stably replicated and repaired in different environments, providing insight into genome evolution and adaptations to new hosts and growth environments. Moreover, genomic sequence analysis has provided new insights into tail fiber variation, lysis, gene duplications, and membrane localization of proteins, while high-resolution structural determination of the "cell-puncturing device," combined with the three-dimensional image reconstruction of the baseplate, has revealed the mechanism of penetration during infection. Despite these advances, nearly 130 potential T4 genes remain uncharacterized. Current phage-sequencing initiatives are now revealing the similarities and differences among members of the T4 family, including those that infect bacteria other than Escherichia coli. T4 functional genomics will aid in the interpretation of these newly sequenced T4-related genomes and in broadening our understanding of the complex evolution and ecology of phages-the most abundant and among the most ancient biological entities on Earth.

The mechanism of transcriptional activation by the topologically DNA-linked sliding clamp of bacteriophage T4

Three viral proteins participate directly in transcription of bacteriophage T4 late genes: the sigma-family protein gp55 provides promoter recognition, gp33 is the co-activator, and gp45 is the activator of transcription; gp33 also represses transcription in the absence of gp45. Transcriptional activation by gp45, the toroidal sliding clamp of the T4 DNA polymerase holoenzyme, requires assembly at primer-template junctions by its clamp loader. The mechanism of transcriptional activation has been analyzed by examining rates of formation of open promoter complexes. The basal gp55-RNA polymerase holoenzyme is only weakly held in its initially formed closed promoter complex, which subsequently opens very slowly. Activation ( approximately 320-fold in this work) increases affinity in the closed complex and accelerates promoter opening. Promoter opening by gp55 is also thermo-irreversible: the T4 late promoter does not open at 0 degrees C, but once opened at 30 degrees C remains open upon shift to the lower temperature. At a hybrid promoter for sigma(70) and gp55-holoenzymes, only gp55 confers thermo-irreversibility of promoter opening. Interaction of gp45 with a C-terminal epitope of gp33 is essential for the co-activator function of gp33.

Efficient identification of photolabelled amino acid residues by combining immunoaffinity purification with MS: revealing the semotiadil-binding site and its relevance to binding sites for myristates in domain III of human serum albumin

To identify photoaffinity-labelled amino acid residue(s), we devised an effective method utilizing immunoaffinity purification of photolabelled fragments, followed by matrix-assisted laser-desorption ionization-time of flight (MALDI-TOF) MS and nanoelectrospray ionization tandem MS (nano-ESI-MS/MS) analysis. Human serum albumin (HSA) was photolabelled with an azidophenyl derivative of semotiadil, FNAK [(+)-(R)-3,4-dihydro-2-[5-methoxy-2-[3-[N-methyl-N-[2-(3-azidophenoxy)-ethyl]amino]propoxyl]phenyl]-4-methyl-2H-1,4-benzothiazin-3-(4H)-one], since HSA is a major binding protein for semotiadil in serum. After lysyl endopeptidase digestion, photolabelled HSA fragments were adsorbed selectively on to Sepharose beads on which an anti-semotiadil antibody was immobilized, and fractions were eluted quantitatively by 50% acetonitrile/10 mM HCl. MALDI-TOF MS analysis of the eluted fraction showed that it contained two photolabelled fragments of m/z 2557.54 (major) and 1322.44 (minor), corresponding to Lys-414-Lys-432 and Ala-539-Lys-545, respectively. Further nano-ESI-MS/MS analysis revealed that Lys-414 was the photolabelled amino acid residue in fragment 414-432 and Lys-541 was a likely candidate in fragment 539-545. Based on the photolabelling results, we constructed a three-dimensional model of the FNAK-HSA complex, revealing that FNAK resides in a pocket that overlaps considerably with myristate (Myr)-binding sites, Myr-3 and -4, by comparison with crystallographic data of HSA-Myr complexes described in Curry, Mandelkow, Brick and Franks (1998) Nat. Struct. Biol. 5, 827-835. Moreover, addition of Myr increased photo-incorporation into Lys-414, whereas incorporation into Lys-541 decreased under conditions of [Myr]/[HSA]<1. Further addition of Myr, however, uniformly decreased photo-incorporation into both Lys residues. These results indicate that FNAK labelling can also be used to monitor Myr binding in domain III. An interpretation for the concomitant local conformational change of HSA is provided.

Replisome-mediated DNA replication

The elaborate process of genomic replication requires a large collection of proteins properly assembled at a DNA replication fork. Several decades of research on the bacterium Escherichia coli and its bacteriophages T4 and T7 have defined the roles of many proteins central to DNA replication. These three different prokaryotic replication systems use the same fundamental components for synthesis at a moving DNA replication fork even though the number and nature of some individual proteins are different and many lack extensive sequence homology. The components of the replication complex can be grouped into functional categories as follows: DNA polymerase, helix destabilizing protein, polymerase accessory factors, and primosome (DNA helicase and DNA primase activities). The replication of DNA derives from a multistep enzymatic pathway that features the assembly of accessory factors and polymerases into a functional holoenzyme; the separation of the double-stranded template DNA by helicase activity and its coupling to the primase synthesis of RNA primers to initiate Okazaki fragment synthesis; and the continuous and discontinuous synthesis of the leading and lagging daughter strands by the polymerases. This review summarizes and compares and contrasts for these three systems the types, timing, and mechanism of reactions and of protein-protein interactions required to initiate, control, and coordinate the synthesis of the leading and lagging strands at a DNA replication fork and comments on their generality.

Transcription activator interactions with multiple SWI/SNF subunits

We have previously shown that the yeast SWI/SNF complex stimulates in vitro transcription from chromatin templates in an ATP-dependent manner. SWI/SNF function in this regard requires the presence of an activator with which it can interact directly, linking activator recruitment of SWI/SNF to transcriptional stimulation. In this study, we determine the SWI/SNF subunits that mediate its interaction with activators. Using a photo-cross-linking label transfer strategy, we show that the Snf5, Swi1, and Swi2/Snf2 subunits are contacted by the yeast acidic activators, Gcn4 and Hap4, in the context of the intact native SWI/SNF complex. In addition, we show that the same three subunits can interact individually with acidic activation domains, indicating that each subunit contributes to binding activators. Furthermore, mutations that reduce the activation potential of these activators also diminish its interaction with each of these SWI/SNF subunits. Thus, three distinct subunits of the SWI/SNF complex contribute to its interactions with activation domains.

Building a replisome solution structure by elucidation of protein-protein interactions in the bacteriophage T4 DNA polymerase holoenzyme

Assembly of DNA replication systems requires the coordinated actions of many proteins. The multiprotein complexes formed as intermediates on the pathway to the final DNA polymerase holoenzyme have been shown to have distinct structures relative to the ground-state structures of the individual proteins. By using a variety of solution-phase techniques, we have elucidated additional information about the solution structure of the bacteriophage T4 holoenzyme. Photocross-linking and mass spectrometry were used to demonstrate interactions between I107C of the sliding clamp and the DNA polymerase. Fluorescence resonance energy transfer, analytical ultracentrifugation, and isothermal titration calorimetry measurements were used to demonstrate that the C terminus of the DNA polymerase can interact at two distinct locations on the sliding clamp. Both of these binding modes may be used during holoenzyme assembly, but only one of these binding modes is found in the final holoenzyme. Present and previous solution interaction data were used to build a model of the holoenzyme that is consistent with these data.

Dynamic protein interactions in the bacteriophage T4 replisome

The bacteriophage T4 DNA replisome is a complex dynamic system employing a variety of proteins to orchestrate the synthesis of DNA on both the leading and lagging strands. Assembly of the protein complexes responsible for DNA synthesis and priming requires the coordination of transient biomolecular interactions. This interplay of proteins has been dissected through the use of small molecules including fluorescent probes and crosslinkers, enabling the development of a complex dynamic structural and kinetic model for DNA polymerase holoenzyme assembly and primosome formation.

Creating a dynamic picture of the sliding clamp during T4 DNA polymerase holoenzyme assembly by using fluorescence resonance energy transfer

The coordinated assembly of the DNA polymerase (gp43), the sliding clamp (gp45), and the clamp loader (gp44/62) to form the bacteriophage T4 DNA polymerase holoenzyme is a multistep process. A partially opened toroid-shaped gp45 is loaded around DNA by gp44/62 in an ATP-dependent manner. Gp43 binds to this complex to generate the holoenzyme in which gp45 acts to topologically link gp43 to DNA, effectively increasing the processivity of DNA replication. Stopped-flow fluorescence resonance energy transfer was used to investigate the opening and closing of the gp45 ring during holoenzyme assembly. By using two site-specific mutants of gp45 along with a previously characterized gp45 mutant, we tracked changes in distances across the gp45 subunit interface through seven conformational changes associated with holoenzyme assembly. Initially, gp45 is partially open within the plane of the ring at one of the three subunit interfaces. On addition of gp44/62 and ATP, this interface of gp45 opens further in-plane through the hydrolysis of ATP. Addition of DNA and hydrolysis of ATP close gp45 in an out-of-plane conformation. The final holoenzyme is formed by the addition of gp43, which causes gp45 to close further in plane, leaving the subunit interface open slightly. This open interface of gp45 in the final holoenzyme state is proposed to interact with the C-terminal tail of gp43, providing a point of contact between gp45 and gp43. This study further defines the dynamic process of bacteriophage T4 polymerase holoenzyme assembly.

A new crosslinker for mass spectrometric analysis of the quaternary structure of protein complexes

Mass spectrometric structural analysis of crosslinked peptides is a powerful method to elucidate the spatial arrangement of polypeptides in protein complexes. Our aim is to develop bifunctional crosslinkers that, after crosslinking protein complexes followed by proteolytic digestion, give rise to crosslinked peptides that can be readily tracked down by mass spectrometry. To this end we synthesized the crosslinker N-benzyliminodiacetoyloxysuccinimid (BID), which yields stable benzyl cation marker ions upon low-energy collision-induced dissociation (CID) tandem mass spectrometry. Sensitive detection of the marker ion upon low-energy CID is demonstrated with different BID-crosslinked peptide preparations. With BID it becomes possible to retrieve crosslinked and crosslinker-adducted peptides, without the necessity of purifying crosslinked peptides prior to identification. The basic design of this crosslinker can be varied upon, in order to meet specific crosslinking needs.

Tracking sliding clamp opening and closing during bacteriophage T4 DNA polymerase holoenzyme assembly

The bacteriophage T4 DNA polymerase holoenzyme, consisting of the DNA polymerase (gp43), the sliding clamp (gp45), and the clamp loader (gp44/62), is loaded onto DNA in an ATP-dependent, multistep reaction. The trimeric, ring-shaped gp45 is loaded onto DNA such that the DNA passes through the center of the ring. gp43 binds to this complex, thereby forming a topological link with the DNA and increasing its processivity. Using stopped-flow fluorescence-resonance energy transfer, we have investigated opening and closing of the gp45 ring during the holoenzyme assembly process. Two amino acids that lie on opposite sides of the gp45 subunit interface, W91 and V162C labeled with coumarin, were used as the fluorescence donor and acceptor, respectively. Free in solution, gp45 has two closed subunit interfaces with W91 to V162-coumarin distances of 19 A and one open subunit interface with a W91 to V162C-coumarin distance of 40 A. Making the assumption that the distance across the two closed subunit interfaces is unchanged during the holoenzyme assembly process, we have found that the distance across the open subunit interface is first increased to greater than 45 A and is then decreased to 30 A during a 10-step assembly mechanism. The gp45 ring is not completely closed in the holoenzyme complex, consistent with previous evidence suggesting that the C-terminus of gp43 is inserted into the gp45 subunit interface. Unexpectedly, ATP-hydrolysis events are coupled to only a fraction of the total distance change, with conformational changes linked to binding DNA and gp43 coupled to the majority of the total distance change. Using the nonhydrolyzable ATP analogue ATP-gamma-S results in formation of a nonproductive gp45 x gp44/62 complex; however, adding an excess of ATP to this nonproductive complex results in rapid ATP/ATP-gamma-S exchange to yield a productive gp45 x gp44/62 complex within seconds.