Whole-Tooth Regeneration by Allogeneic Cell Reassociation in Pig Jawbone

LIM homeobox 8 reduced apoptosis and promoted periodontal tissue regeneration function of dental pulp stem cells

Stem cell-mediated tissue regeneration is a promising strategy for repairing tissue defects and functional reconstruction in periodontitis, a common disease that leads to the loss of alveolar bone and teeth. However, stem cell apoptosis, widely observed during tissue regeneration, impairs its efficiency. Therefore, the regulation of stem cell apoptosis is critical for improving regeneration efficiency. The LIM homeobox 8 gene LHX8, belongs to the LIM homeobox family, which was involved in tooth morphogenesis. Here, we found that LHX8 was significantly expressed in dental pulp. LHX8 knockdown significantly increased dental pulp mesenchymal stem cells (DPSCs) apoptosis, as confirmed by RT-PCR, western blotting, flow cytometry, and transmission electron microscopy. Additionally, LHX8 overexpression inhibited apoptosis and enhanced the osteo/odontogenic differentiation potential of hDPSCs in vitro. Furthermore, LHX8-overexpression could enhance the periodontal tissue regeneration efficiency of hDPSCs in mice with periodontitis. In conclusion, the present study indicates that LHX8 inhibits stem cell apoptosis and promotes functional tissue formation in stem cell-based tissue regeneration engineering, suggesting a new therapeutic target to increase the efficacy of periodontal tissue regeneration.

Current Trends, Advances, and Challenges of Tissue Engineering-Based Approaches of Tooth Regeneration: A Review of the Literature

INTRODUCTION

Tooth loss is a significant health issue. Currently, this situation is often treated with the use of synthetic materials such as implants and prostheses. However, these treatment modalities do not fully meet patients' biological and mechanical needs and have limited longevity. Regenerative medicine focuses on the restoration of patients' natural tissues via tissue engineering techniques instead of rehabilitating with artificial appliances. Therefore, a tissue-engineered tooth regeneration strategy seems like a promising option to treat tooth loss.

OBJECTIVE

This review aims to demonstrate recent advances in tooth regeneration strategies and discoveries about underlying mechanisms and pathways of tooth formation.

RESULTS AND DISCUSSION

Whole tooth regeneration, tooth root formation, and dentin-pulp organoid generation have been achieved by using different seed cells and various materials for scaffold production. Bioactive agents are critical elements for the induction of cells into odontoblast or ameloblast lineage. Some substantial pathways enrolled in tooth development have been figured out, helping researchers design their experiments more effectively and aligned with the natural process of tooth formation.

CONCLUSION

According to current knowledge, tooth regeneration is possible in case of proper selection of stem cells, appropriate design and manufacturing of a biocompatible scaffold, and meticulous application of bioactive agents for odontogenic induction. Understanding innate odontogenesis pathways play a crucial role in accurately planning regenerative therapeutic interventions in order to reproduce teeth.

DLP 3D printing of high-resolution root scaffold with bionic bioactivity and biomechanics for personalized bio-root regeneration

Digital light projection (DLP) printing of hydroxyapatite (HAp) bioceramic provides a promising strategy for fabrication of complex personalized bio-tooth root scaffold with high-resolution. However, it is still a challenge to fabricate bionic bio-tooth root with satisfied bioactivity and biomechanics. This research studied the HAp-based bioceramic scaffold with bionic bioactivity and biomechanics for personalized bio-root regeneration. Compared to natural decellularized dentine (NDD) scaffolds with unitary shape and restricted mechanical properties, those DLP printing bio-tooth roots with natural size, high precision appearance, excellent structure, and a smooth surface were successfully manufactured, which met various shape and structure requirements for personalized bio-tooth regeneration. Moreover, the bioceramic sintering at 1250 °C enhanced the physicochemical properties of HAp and exhibited good elastic modulus (11.72 ± 0.53 GPa), which was almost twice of early NDD (4.76 ± 0.75 GPa). To further improve the surface activity of sintered biomimetic, the nano-HAw (nano-hydroxyapatite whiskers) coating deposited by hydrothermal treatment increased the mechanical properties and surface hydrophilicity, which indicated positive effects on dental follicle stem cells (DFSCs)' proliferation and enhanced the DFSCs osteoblastic differentiation in vitro. Subcutaneous transplantation in nude mice and in-situ transplantation in rat alveolar fossa proved that the nano-HAw-containing scaffold could promote the DFSCs differentiate into periodontal ligament-like enthesis formation. In conclusion, by combining the optimized sintering temperature and modified nano-HAw interface through hydrothermal treatment, the DLP-printing of HAp-based bioceramic with favorable bioactivity and biomechanics is a promising candidate for personalized bio-root regeneration.

Tooth number abnormality: from bench to bedside

Tooth number abnormality is one of the most common dental developmental diseases, which includes both tooth agenesis and supernumerary teeth. Tooth development is regulated by numerous developmental signals, such as the well-known Wnt, BMP, FGF, Shh and Eda pathways, which mediate the ongoing complex interactions between epithelium and mesenchyme. Abnormal expression of these crutial signalling during this process may eventually lead to the development of anomalies in tooth number; however, the underlying mechanisms remain elusive. In this review, we summarized the major process of tooth development, the latest progress of mechanism studies and newly reported clinical investigations of tooth number abnormality. In addition, potential treatment approaches for tooth number abnormality based on developmental biology are also discussed. This review not only provides a reference for the diagnosis and treatment of tooth number abnormality in clinical practice but also facilitates the translation of basic research to the clinical application.

Whole Tooth Regeneration: Can Animal Studies be Translated into Clinical Application?

Tooth loss leads to several oral problems and although a large number of treatments have been proposed to rehabilitate partially or totally edentulous patients, none of them is based on replacement of a missing tooth by a new natural whole tooth. In the field of tissue engineering, some animal models have been developed to regenerate a natural tooth in the oral cavity. This review shows the state of the art in whole tooth regeneration based on data from in vivo studies. A systematic scoping review was conducted to evaluate studies that described whole-tooth regeneration and eruption in the oral cavity. The data demonstrated that over 100 animals were used in experimental studies and all of them received implants of tooth germs constructed by bioengineering processes. Mini pigs and pigs were used in four studies followed by mice (n = 1) and dog (n = 1). Over 58 (44%) animals showed whole tooth eruption around 3.5 months after tooth germ implantation (1 to 13.5 months). Most of specimens revealed the presence of odontoblasts, dentin, dentinal tubules, dental pulp, root analogue, cementum, blood vessels, and alveolar bone. It could be concluded that in vivo whole tooth regeneration was proved to be possible, but the challenge to overcome translational barriers and test these approaches in humans still remains. Impact Statement Advances in tissue engineering have led to the development of new methods to regenerate and replace tissues and organs, including teeth. Tooth regeneration is the main goal for the replacement of tooth loss and therefore current evidence showed that tissue engineering might provide this treatment in future.

miR-6807-5p Inhibited the Odontogenic Differentiation of Human Dental Pulp Stem Cells Through Directly Targeting METTL7A

Background: Tooth tissue regeneration mediated by mesenchymal stem cells (MSCs) has become the most ideal treatment. Although the known regulatory mechanism and some achievements have been discovered, directional differentiation cannot effectively induce regeneration of tooth tissue. In this study, we intended to explore the function and mechanism of miR-6807-5p and its target gene METTL7A in odontogenic differentiation.

Methods: In this study, human dental pulp stem cells (DPSCs) were used. Alkaline phosphatase (ALP), Alizarin red staining (ARS), and calcium ion quantification were used to detect the odontogenic differentiation of miR-6807-5p and METTL7A. Real-time RT-PCR, western blot, dual-luciferase reporter assay, and pull-down assay with biotinylated miRNA were used to confirm that METTL7A was the downstream gene of miR-6807-5p. Protein mass spectrometry and co-immunoprecipitation (Co-IP) were used to detect that SNRNP200 was the co-binding protein of METTL7A.

Results: After mineralized induction, the odontogenic differentiation was enhanced in the miR-6807-5p-knockdown group and weakened in the miR-6807-5p-overexpressed group compared with the control group. METTL7A was the downstream target of miR-6807-5p. After mineralized induction, the odontogenic differentiation was weakened in the METTL7A-knockdown group and enhanced in the METTL7A-overexpressed group compared with the control group. SNRNP200 was the co-binding protein of METTL7A. The knockdown of SNRNP200 inhibited the odontogenic differentiation of DPSCs.

Conclusion: This study verified that miR-6807-5p inhibited the odontogenic differentiation of DPSCs. The binding site of miR-6807-5p was the 3′UTR region of METTL7A, which was silenced by miR-6807-5p. METTL7A promoted the odontogenic differentiation of DPSCs. SNRNP200, a co-binding protein of METTL7A, promoted the odontogenic differentiation of DPSCs.

Strategies for differentiation of hiPSCs into dental epithelial cell lineage

Different stem cell-based strategies, especially induced pluripotent stem cells (iPSCs), have been exploited to regenerate teeth or restore biological and physiological functions after tooth loss. Further research is needed to establish an optimized protocol to effectively differentiate human iPSCs (hiPSCs) into dental epithelial cells (DECs). In this study, various factors were precisely modulated to facilitate differentiation of hiPSCs into DECs, which are essential for the regeneration of functional teeth. Embryoid bodies (EBs) were formed from hiPSCs as embryo-like aggregates, retinoic acid (RA) was used as an early ectodermal inducer, and bone morphogenic protein 4 (BMP4) activity was manipulated. The characteristics of DECs were enhanced and preserved after culture in keratinocyte serum-free medium (K-SFM). The yielded cell population exhibited noticeable DEC characteristics, consistent with the expression of epithelial cell and ameloblast markers. DECs demonstrated odontogenic abilities by exerting an inductive effect on human dental pulp stem cells (hDPSCs) and forming a tooth-like structure with the mouse tooth mesenchyme. Overall, our differentiation protocol provides a practical approach for applying hiPSCs for tooth regeneration.

Characteristics of Large Animal Models for Current Cell-Based Oral Tissue Regeneration

The recent advances in the field of cell-based therapeutics open promising perspectives for oral tissue regeneration. The development of large animal models, which overcome the limits of the rodent models and allow to emulate clinical situations, is crucial for the validation of regenerative strategies to move toward clinical application. Currently, porcine, canine, and ovine models are mainly developed for oral regeneration and their specific characteristics have an impact on the outcomes of the studies. Thus, this systematic review investigates the application of porcine, canine, and ovine models in present cell-based oral regeneration, according to the species characteristics and the targeted tissue to regenerate. A customized search of PubMed, EMBASE, Scopus, and Web of Science databases from January 2015 to March 2020 was conducted. Relevant articles about cell-based oral tissues engineering in porcine, canine, and ovine models were evaluated. Among the evaluated articles, 58 relevant studies about cell-based oral regeneration in porcine, canine, and ovine models matched the eligibility criteria and were selected for full analysis. Porcine models, the most similar species with humans, were mostly used for bone and periodontium regeneration; tooth regeneration was reported only in pig, except for one study in dog. Canine models were the most transversal models, successfully involved for all oral tissue regeneration and notably in implantology. However, differences with humans and ethical concerns affect the use of these models. Ovine models, alternative to porcine and canine ones, were mainly used for bone and, scarcely, periodontium regeneration. The anatomy and physiology of these animals restrain their involvement. If consistency was found in defect specificities and cell trends among different species animal models of bone, dentin-pulp complex, or tooth regeneration, variability appeared in periodontium. Regeneration assessment methods were more elaborate in porcines and canines than in ovines. Risk of bias was low for selection, attrition and reporting, but unclear for performance and detection. Overall, if none of the large animal models can be considered an ideal one, they are of deemed importance for oral cell-based tissue engineering and researchers should consider their relevance to establish favorable conditions for a given preclinical cell-based therapeutics.

Establishment of Pulp Damage Repair Models in Miniature Pigs Using Diode Lasers

Objective: To establish a controlled pulp damage repair model in miniature pigs by using a diode laser. Background: Laser is a novel kind of controllable energy, and it is widely used in dentistry. Methods: The premolars of four 24- to 28-month-old miniature pigs were divided into three laser groups, according to the output powers of a diode laser, and the nonirradiated first molars acted as controls. The teeth in laser groups were irradiated under three parameters (output powers 1.5, 2.5, 4 W, continuous wave, frequency 50 Hz for 60 sec). The dental and gingival morphology was observed at 0, 7, 14, and 21 days after laser irradiation. The animals were sacrificed for qualitative and quantitative pulp histopathological analysis. Results: The three laser groups present no seriously irreversible dental and gingival damage. In the 1.5-W group, dental pulp exhibited angiectasis and hyperemia with no inflammation, and did not significantly differ with the control groups at 21 days (p > 0.05). In the 2.5-W group, pulpal inflammation was highest at 7 days and then decreased significantly at 21 days, and the tissue repair appeared at 14 days (p < 0.05). In the 4-W group, pulpal inflammation was significantly highest at 7 days, with an increase in the degree of tissue repair (p < 0.05). Conclusions: The output power of 1.5 W developed a reversible pulpitis model; the output powers of 2.5 and 4 W within 7 days led to the development of irreversible pulpitis models, which proceeded as chronic pulpitis with obvious tissue repair.

MTA Enhances the Potential of Adipose-Derived Mesenchymal Stem Cells for Dentin-Pulp Complex Regeneration

The aim of the current study was to investigate the effects of mineral trioxide aggregate (MTA) on the proliferation and differentiation of human adipose-derived mesenchymal stem cells (Ad-MSCs) as a surrogate cell source in futuristic stem-cell-based endodontic therapies. Human Ad-MSCs and mesenchymal stem cells derived from bone marrow (BM-MSCs) were isolated from liposuction waste adipose tissue and femur, respectively, and the effects of MTA-conditioned media on their viability, mineralization potential, and osteo/odontogenic differentiation capacity were subsequently evaluated. Alkaline phosphatase (ALP) activity, quantitative alizarin red S staining, and quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analyses were performed to investigate and compare the osteo/odontogenic induction potential of MTA on the Ad/BM-MSCs. The results of cytotoxicity assay revealed that at different concentrations, MTA-conditioned medium was not only biocompatible toward both cell types, but also capable of promoting cell proliferation. ALP activity assay showed that 0.2 mg/mL was the optimal concentration of MTA-conditioned medium for osteo/odontogenic induction in Ad/BM-MSCs. The expression of osteo/odontogenic gene markers was increased in Ad/BM-MSCs treated with 0.2 mg/mL MTA-conditioned media. Our results indicated that MTA can efficiently enhance the osteo/odontogenic potential of Ad-MSCs, and thus they can be considered as a better cell source for dentin-pulp complex regeneration. However, further investigations are required to test these potentials in animal models.

New insight into dental epithelial stem cells: Identification, regulation, and function in tooth homeostasis and repair

Tooth enamel, a highly mineralized tissue covering the outermost area of teeth, is always damaged by dental caries or trauma. Tooth enamel rarely repairs or renews itself, due to the loss of ameloblasts and dental epithelial stem cells (DESCs) once the tooth erupts. Unlike human teeth, mouse incisors grow continuously due to the presence of DESCs that generate enamel-producing ameloblasts and other supporting dental epithelial lineages. The ready accessibility of mouse DESCs and wide availability of related transgenic mouse lines make mouse incisors an excellent model to examine the identity and heterogeneity of dental epithelial stem/progenitor cells; explore the regulatory mechanisms underlying enamel formation; and help answer the open question regarding the therapeutic development of enamel engineering. In the present review, we update the current understanding about the identification of DESCs in mouse incisors and summarize the regulatory mechanisms of enamel formation driven by DESCs. The roles of DESCs during homeostasis and repair are also discussed, which should improve our knowledge regarding enamel tissue engineering.

Advanced Biomaterials and Techniques for Oral Tissue Engineering and Regeneration-A Review

The reconstruction or repair of oral and maxillofacial functionalities and aesthetics is a priority for patients affected by tooth loss, congenital defects, trauma deformities, or various dental diseases. Therefore, in dental medicine, tissue reconstruction represents a major interest in oral and maxillofacial surgery, periodontics, orthodontics, endodontics, and even daily clinical practice. The current clinical approaches involve a vast array of techniques ranging from the traditional use of tissue grafts to the most innovative regenerative procedures, such as tissue engineering. In recent decades, a wide range of both artificial and natural biomaterials and scaffolds, genes, stem cells isolated from the mouth area (dental follicle, deciduous teeth, periodontal ligament, dental pulp, salivary glands, and adipose tissue), and various growth factors have been tested in tissue engineering approaches in dentistry, with many being proven successful. However, to fully eliminate the problems of traditional bone and tissue reconstruction in dentistry, continuous research is needed. Based on a recent literature review, this paper creates a picture of current innovative strategies applying dental stem cells for tissue regeneration in different dental fields and maxillofacial surgery, and offers detailed information regarding the available scientific data and practical applications.

Tooth Formation: Are the Hardest Tissues of Human Body Hard to Regenerate?

With increasing life expectancy, demands for dental tissue and whole-tooth regeneration are becoming more significant. Despite great progress in medicine, including regenerative therapies, the complex structure of dental tissues introduces several challenges to the field of regenerative dentistry. Interdisciplinary efforts from cellular biologists, material scientists, and clinical odontologists are being made to establish strategies and find the solutions for dental tissue regeneration and/or whole-tooth regeneration. In recent years, many significant discoveries were done regarding signaling pathways and factors shaping calcified tissue genesis, including those of tooth. Novel biocompatible scaffolds and polymer-based drug release systems are under development and may soon result in clinically applicable biomaterials with the potential to modulate signaling cascades involved in dental tissue genesis and regeneration. Approaches for whole-tooth regeneration utilizing adult stem cells, induced pluripotent stem cells, or tooth germ cells transplantation are emerging as promising alternatives to overcome existing in vitro tissue generation hurdles. In this interdisciplinary review, most recent advances in cellular signaling guiding dental tissue genesis, novel functionalized scaffolds and drug release material, various odontogenic cell sources, and methods for tooth regeneration are discussed thus providing a multi-faceted, up-to-date, and illustrative overview on the tooth regeneration matter, alongside hints for future directions in the challenging field of regenerative dentistry.

Comparison of actual porcine tooth crown development stages and computer image analysis

Tooth developmental stage evaluation is important in dental and chronological age estimation, and it is important for accurate diagnoses and appropriate treatment in dental practice. It is routinely assessed by clinical observations and radiographic techniques. This study aimed at ascertaining tooth developmental stage judgments made by examiners and Mimics software according to the Nolla method with radiographs. Meanwhile, the true tooth developmental stages would be explored with histological analysis. Twenty freshly slaughtered porcine heads were collected and hemisected, and both the left and right mandibular samples were numbered. The developmental stages of the second and third permanent molars (M2 and M3) were evaluated by examiners and Mimics software analysis. The ratio of the radiopaque calcified area to the dental follicle (RCA/DF) at different stages was calculated. Both non-decalcified and decalcified samples were processed for histologic observation. The results showed significant differences between RCA/DF ratios from different developmental stages. There was a high positive correlation between the examiners' evaluation results and Mimics analysis results. Radiograph judgments and histology observation results were consistent from Stages 2-6. However, radiograph images of Stage 1 samples showed only crypts present, while under a surgical operating microscope, a bell-shaped tooth germ was observed. This was also confirmed by normal and hard tissue histology. In conclusion, radiograph judgments made by either examiners or Mimics software were both reliable. Mimics analysis can be a useful tool in evaluating tooth developmental stages. However, judgments need to be made cautiously in early developmental stages.