Comparative analysis between extra‐short implants (≤ 6mm) and 6mm‐longer implants: A Meta‐Analysis of Randomized Controlled Trial

Short (≤6 mm) compared with ≥10-mm dental implants in different clinical scenarios: A systematic review of randomized clinical trials with meta-analysis, trial sequential analysis and quality of evidence grading

AIM

To systematically identify, synthesize and critically summarize the available scientific evidence from randomized controlled trials (RCTs) regarding whether short (≤6 mm) perform as well as long (≥10 mm) implants regarding implant survival, marginal bone loss, and biologic and prosthetic complications in different clinical scenarios.

MATERIALS AND METHODS

Cochrane Collaboration's risk of bias tool and the GRADE approach were applied. Results were synthesized using random-effects meta-analyses assessed by trial sequential analyses.

RESULTS

Forty reports on 19 RCTs comprising 2214 (1097 short; 1117 long) implants were included. Moderate/high certainty/quality evidence demonstrated similar 5-year survival rates for ≤6-mm and ≥10-mm implants in non-augmented bone and full-mouth rehabilitation in either jaw, and for 6-mm implants in the maxilla instead of sinus lift. Nevertheless, the evidence for 5-year survival rates remains inconclusive or insufficient for the remaining combinations of implant lengths and clinical scenarios. They include 4-mm and 5-mm implants as alternatives to sinus lift as well as placing all implant lengths ≤6 mm instead of vertical ridge augmentation with long implants. Marginal bone level and short- and long-term biologic or prosthetic complications were similar.

CONCLUSIONS

Based on moderate/high certainty/quality evidence from 5-year RCTs, implants ≤6 mm may be viable alternatives to ≥10-mm implants in either jaw in native bone and full-arch rehabilitation, and 6-mm implants may be used as an alternative to sinus lift.

TRIAL REGISTRATION

PROSPERO ID: CRD42021254365.

Single crown restorations supported by 6-mm implants in the resorbed posterior mandible: A 10-year prospective case series

PURPOSE

To assess marginal bone level changes, implant and restoration survival, condition of the peri-implant mucosa, and the patient's satisfaction with the single restoration supported by a 6-mm long implant in the posterior mandible after 10 years in function.

MATERIALS AND METHODS

Twenty-one consecutive patients missing premolars or molars in the posterior mandible, with a bone volume consisting of a width of at least 6 mm and an estimated height of 8 mm between the top of the ridge and alveolar nerve, were included. Each patient received one or more 6-mm implants. After 3 months, the implants were restored with custom-made titanium abutments and cemented zirconia-based porcelain crowns. The clinical examination and radiograph data were assessed at restoration placement and after 12, 60, and 120 months. The patients answered a questionnaire to score their satisfaction before treatment and after 12, 60, and 120 months with the restoration in function.

RESULTS

A total of 31 implants were placed. Implant survival was 100%. The 10-year mean marginal bone loss was 0.18 mm (SE: 0.08). The plaque, calculus, gingiva, and bleeding indices scores were low as was the mean pocket probing depth. The patients' satisfaction was high.

CONCLUSION

The 10-year follow-up data of this limited case series study reveal that 6-mm dental implants inserted in the resorbed posterior mandible provide a solid basis for single tooth restorations.

Single crowns in the posterior maxilla supported by either 11-mm long implants with sinus floor augmentation or by 6-mm long implants: A 10-year randomized controlled trial

OBJECTIVES

To compare the clinical performance of single crowns in the posterior maxilla supported by either 11-mm long implants combined with maxillary sinus floor augmentation (MSFA) surgery or by 6-mm long implants during a 10-year follow-up period.

MATERIALS AND METHODS

Subjects were randomly allocated to receive one 11-mm long implant in combination MFSA or to receive one 6-mm long implant without any grafting. Twenty-one implants in 20 patients were placed in the 6-mm group and 20 implants in 18 patients were placed in the 11-mm group. Both groups were followed by clinical and radiographic examinations up to 10 years. Patients' satisfaction was also scored before treatment.

RESULTS

Two patients died and eight patients moved during the follow-up. Two patients lost an implant in the 6-mm group and one implant was lost in the 11-mm group (implant survival 89.5% and 90.9%, respectively). From loading to 10 years' follow-up, mean ± SE marginal bone loss in the 6-mm group and 11-mm group was 0.18 ± 0.10 mm and 0.26 ± 0.12 mm, respectively, without a significant difference between the groups at 10 years (p = .650). In both groups, indices scores for plaque, calculus, gingiva and bleeding were low as well as mean pocket probing depth. Patients' satisfaction at 10 years was high in both groups; mean overall satisfaction in the 6-mm group and 11-mm group was 9.6 ± 0.6 and 9.2 ± 0.8, respectively (p = .168).

CONCLUSIONS

Placement of 6-mm implants or 11-mm implants combined MFSA are equally successful during a 10-year follow-up period when applied for supporting a single restoration.

Investigating the impact of diameters and thread designs on the Biomechanics of short implants placed in D4 bone: a 3D finite element analysis

BACKGROUND

Dental implants emerge as a dependable and efficacious alternative for patients experiencing partial or complete tooth loss. The stability of these implants is influenced by surface topography and macro-level design. In cases where the height of the maxillary posterior region is diminished, employing short implants can prove advantageous. With the aim of examining the distribution of von Mises stress, strain, and micromovement in D4 bone quality surrounding platform-switched short implants, measuring 6 mm in length and featuring diameters ranging from 4 to 6 mm, as well as different thread designs, an in-depth finite element analysis was conducted under immediate loading conditions.

METHODOLOGY

A 3D finite element model was constructed to simulate maxillary molar crowns, incorporating an implant with a length of 6 mm and varying diameters and thread designs. The diameters utilized were 4/3.6 mm, 5/4 mm, and 6/4.8 mm, while the thread designs included buttress, square, and triangle patterns. Each model underwent analysis with a 100 N force applied in two directions: vertical and oblique, relative to the long axis of the implant. Stress, strain, and micromovement in the peri-implant region were recorded, employing the Ansys Workbench R v.18.1 software for modelling and analysis.

RESULTS

When comparing all three diameters, the wide diameter (6 mm threads) exhibited the lowest values of peri-implant von Mises stresses (3.3 MPa and 35.1 MPa), strains (194 Ɛ and 484 Ɛ), and micromovements (0.7 μm and 1.3 Ɛ) subjected to axial and non-axial loading of a 100 N force. Notably, square microthreads yielded the most favorable stress parameters among the different thread shapes, manifesting the minimum values of stress, strains, and micromovements in their vicinity.

CONCLUSION

For the treatment of atrophic ridges or in scenarios necessitating extensive surgical preparation of the implant site, a combination of short implants, wide diameters, and platform switching can be employed. In situations with reduced bone height and the requirement for an implant-supported prosthesis to replace a missing permanent maxillary molar, the utilization of wide-diameter platform-switched short implants measuring 6 mm in length, featuring a square thread design, should be taken into consideration.

New strategy for osseodensification during osteotomy in low-density bone: an in vitro experimental study

The goal of this in vitro study was to evaluate and propose a new strategy for osseodensification technique using a drill counterclockwise to densification of bone of low density. Synthetic bone blocks of two different low densities (type III and IV) were used for the tests. The conventional drilling group (CD group) used Turbo-drill in a clockwise direction, and the osseodensification group (OD group) applied Turbo-drill in a counterclockwise direction. The applied tests were: (i) measurement of the temperature variation (ΔT) and (ii) measurement of the torque during the osteotomies, comparing the new strategy with the conventional drilling. Both groups were tested without (condition c1) and with (condition c2) irrigation, generating four subgroups: CDc1, CDc2, ODc1, and ODc2. Twenty osteotomies were made for each subgroup with a thermocouple positioned intra-bone (1 mm distant from the osteotomy) to measure the temperature produced. Other 20 samples/group were used to measure the torque value during each osteotomy in both synthetic bone density blocks. The mean of the ΔT during the osteotomies in type III bone was: 6.8 ± 1.26 °C for the CDc1 group, 9.5 ± 1.84 °C for the ODc1, 1.5 ± 1.35 °C for the CDc2, and 4.5 ± 1.43 °C for ODc2. Whereas, in the type IV bone, the ΔT was: 5.2 ± 1.30 °C for the CDc1 group, 7.0 ± 1.99 °C for the ODc1, 0.9 ± 1.05 °C for the CDc2, and 2.7 ± 1.30 °C for ODc2. The maximum torque during the osteotomies was: 8.8 ± 0.97 Ncm for CD samples and 11.6 ± 1.08 Ncm for OD samples in the type III bone; and 5.9 ± 0.99 Ncm for CD samples and 9.6 ± 1.29 Ncm for OD samples in the type IV bone. Statistical differences between the groups were detected in tests and conditions analyzed (p < 0.05). Using the drill counterclockwise for osseodensification in low-density bone generated a significantly greater torque of a drill than in CD and temperature variation during osteotomies. However, the temperature range displayed by the OD group was below critical levels that can cause damage to bone tissue.

Clinical Evaluation of Short (6 mm) and Longer Implants Placed Side by Side in Posterior Partially Edentulous Area: A 3-Year Observational Study

Background

Short implants have been proposed as an alternative solution for the rehabilitation of atrophic posterior region.

Purpose

To compare the clinical outcomes between 6 mm short implants and conventional implants placed under similar conditions of bone quality and occlusal loading.

Materials and Methods

Nine patients received atone 6 mm implant and one standard-length (8 mm length or longer) implants in a total of 10 partially edentulous areas. Implants were left submerged for 3-6 months healing period and the screw-retained splinted prostheses were delivered. When the provisional or final restoration was placed, and at each year after loading, standardized intraoral radiograph was taken for themarginal bone level (MBL) changes around the implants. Subsequently, the patients were recalled for the clinical examination evaluating the implant survival, sulcus bleeding index, suppuration, and the incidence of prosthetic complications at every 6 months after the definitive crown delivery. The observation period was continued to 3 years (mean follow-up was 3.4 ± 0.3 years) after functional loading.

Results

Nine patients (10 short implants and 10 standard length implants) were selected in this study. Cumulative survival rates of the short implants and standard-length implants were 100% in both groups, and no biological and prosthetic complication were found in 3 years observation period. Cortical bone thickness of implant insertion sites was 1.39 ± 0.45 mm at short implants and 1.38 ± 0.69 mm at standard-length implants, and trabecular bone computed tomography values of implant insertion sites was 424.1 ± 290.1 at short implants and 410.9 ± 267.9 at standard-length implants. The MBL changes were -0.30 ± 0.71 mm at short implants and -0.19 ± 0.78 mm at standard-length implants at 3 years follow-up visit. No significant difference was found in the average of MBL changes between implant length.

Conclusions

Within the limits of this study, it can be concluded that 6 mm short implants in a posterior edentulous region showed excellent results compared with conventional implants.

Evaluation of Behavior of Castable versus Machined Solid Abutments for Morse Tapper Implant Connection: A Clinical Retrospective Study

Objective: The primary objective of the present retrospective clinical study was to evaluate and compare the clinical performance presented by castable abutments developed for the MT system versus intermediate machined abutments, specifically regarding prosthetic or implant fractures/loss; the secondary objective was to verify the looseness of the abutments and the behavior of the peri-implant soft tissues. Methods: This clinical retrospective study was conducted on patients rehabilitated between 2019 and 2020. Inclusion criteria were patients in good general health, with an implants-supporting single crown; with solid machined abutments (control group) or castable UCLA abutments; with a connection portion (base) machined in cobalt-chrome (test group) over Morse taper DuoCone implants in the posterior mandible area; and at least two years in function. Clinical assessment was carried out by the same professional, considering the following parameters: (A) prosthetic: (i) loosening of the fixation screw, (ii) fracture of the screw and (iii) the number of times the patient had some type of complication after the installation of the prostheses were evaluated; (B) biological: (i) without keratinized mucosa (KM), (ii) 1 mm or less, (iii) between 1 and 2 mm and (iv) greater than 2 mm of KM width; and the presence or absence of mucositis. Furthermore, radiographic evaluation was performed in order to assess the marginal bone loss. These evaluations permitted to compare the groups analyzed and patients enrolled. Data were statistically analyzed, with the level of significance set at α = 0.05. Results: 79 patients with 120 MT implants were evaluated (80 castable UCLA abutments and 40 machined solid abutments). The follow-up was from 2 to 4 years. There was a 100% implant survival rate. Therefore, the control group showed two fractured abutments (5%) and no abutment loosening (95% for prosthetic survival rate), whereas the test group showed no abutment fracture but nine loosening screws (11.3%) (100% for prosthetic survival rate). Keratinized mucosa was considered thin or absent in 19 implants in the control group (47.5%) and 42 in the test group (52.5%). Mucositis was found in 11 implants in the control group (27.5%) and 27 in the test group (33.8%). A positive correlation was observed between the width of keratinized mucosa and mucositis (r = 0.521, p = 0.002). The mean marginal bone loss was 2.3 mm, ranging from 1.1 to 5.8 mm. No correlation was observed when considering marginal bone loss versus the three parameters (implant diameter, implant length and time of the prosthesis in function). Conclusions: The results suggest that UCLA-type abutments are a viable option for rehabilitating implants with Morse taper connections, suggesting lower fracture risk. Further research is necessary to confirm these findings and thoroughly evaluate the clinical performance and long-term outcomes.

Marginal Bone Level and Clinical Parameter Analysis Comparing External Hexagon and Morse Taper Implants: A Systematic Review and Meta-Analysis

The goal of this systematic review was to verify the marginal bone loss (MBL) and other clinical parameters comparing external hexagon (EH) and Morse taper (MT) implants when they were evaluated within the same study. The focused question was, "For patients (P) treated with external connection (I) or Morse taper (C) dental implants, were there differences in the marginal bone crest maintenance after at least three months in occlusal function (O)"? As for the inclusion criteria that were considered, they included clinical studies in English that compared the MBL in implants with EH and MT, with follow-up of at least three months, that were published between 2011 and 2022; as for the exclusion criteria, they included publications investigating only one type of connection that analyzed other variables and did not report results for the MBL, reports based on questionnaires, interviews, and case reports/series, systematic reviews, or studies involving patients with a significant health problem (ASA Physical Status 3 and above). The PubMed/MEDLINE, Embase, and Web of Science databases were screened, and all of the data obtained were registered in a spreadsheet (Excel^®). The Jadad scale was used to assess the quality of the studies. A total of 110 articles were initially identified; 11 were considered for full-text reading. Then, six articles (four RCTs and two prospective studies) met the eligibility criteria and were included in this study. A total of 185 patients (mean age of 59.71) were observed, and the follow-up ranged from 3 months to 36 months. A total of 541 implants were registered (267 EH and 274 MT). The survival rate ranged between 96% and 100% (the average was 97.82%). The MBL was compared among all periods studied; therefore, the common assessment period was the 12-month follow-up, presenting greater MBL for EH than for MT (p < 0.001). A mean MBL of 0.60 mm (95% CI 0.43-0.78) was found after the same period. BoP was reported in 5 studies and plaque index was reported in 4 (2 with more than 30%). Deep PD was observed in three studies. High heterogeneity was observed (I₂ = 85.06%). Thus, within the limitation of this review, it was possible to conclude that there is higher bone loss in EH than in MT implants when evaluating and comparing this variable within the same study. However, the results must be carefully interpreted because of this review's limited number of clinical studies, the short assessment period, and the high heterogeneity found.

Antisclerostin Effect on Osseointegration and Bone Remodeling

Objective: This study reviewed the literature on local or systemic administration of antisclerostin, presenting results associated with osseointegration of dental/orthopedic implants and stimulation of bone remodeling. Materials and Methods: An extensive electronic search was conducted through MED-LINE/PubMed, PubMed Central, Web of Science databases and specific peer-reviewed journals to identify case reports, case series, randomized controlled trials, clinical trials and animal studies comparing either the systemic or local administration of antisclerostin and its effect in osseointegration and bone remodeling. Articles in English and with no restriction on period were included. Results: Twenty articles were selected for a full-text, and one was excluded. Finally, 19 articles were included in the study (16 animal studies and 3 randomized control trials). These studies were divided into two groups, which evaluated (i) osseointegration and (ii) bone remodeling potential. Initially 4560 humans and 1191 animals were identified. At least 1017 were excluded from the studies (981 humans and 36 animals), totaling 4724 subjects who completed (3579 humans and 1145 animals). (a) Osseointegration: 7 studies described this phenomenon; 4 reported bone-implant contact, which increased in all included studies. Similar results were found for bone mineral density, bone area/volume and bone thickness. (b) Bone remodeling: 13 studies were used for description. The studies reported an increase in BMD with sclerostin antibody treatment. A similar effect was found for bone mineral density/area/volume, trabecular bone and bone formation. Three biomarkers of bone formation were identified: bone-specific alkaline phosphatase (BSAP), osteocalcin and procollagen type 1 N-terminal Pro-peptide (P1NP); and markers for bone resorption were: serum C-telopeptide (sCTX), C-terminal telopeptides of type I collagen (CTX-1), β-isomer of C-terminal telopeptides of type I collagen (β-CTX) and tartrate-resistant acid phosphatase 5b (TRACP-5b). There were limitations: low number of human studies identified; high divergence in the model used (animal or human); the variance in the type of Scl-Ab and doses of administration; and the lack of reference quantitative values in the parameters analyzed by authors' studies (many articles only reported qualitative information). Conclusion: Within the limitations of this review and carefully observing all data, due to the number of articles included and the heterogeneity existing, more studies must be carried out to better evaluate the action of the antisclerostin on the osseointegration of dental implants. Otherwise, these findings can accelerate and stimulate bone remodeling and neoformation.

The Influence of rhBMP-7 Associated with Nanometric Hydroxyapatite Coatings Titanium Implant on the Osseointegration: A Pre-Clinical Study

Background: Bioceramic nanometer coatings have been regarded as potential substitutes for plasma-sprayed hydroxyapatite coatings, and the association with bone morphogenetic protein (BMP) is an attempt to achieve faster osseointegration to hasten oral rehabilitation. Objective: This study aimed to investigate the effect of recombinant human bone morphogenetic protein-7 (rhBMP-7) on the osseointegration of titanium implants coated with a thin film surface of hydroxyapatite (HA). Methods: Two implants (n = 24) were placed in each white New Zealand rabbits’ femur (n = 6). Implants were placed in the right femur after standard instrumentation (A and B) and in the left femur after an over-instrumentation (C and D), preventing bone-implant contact. The distal implants were installed associated with rhBMP-7 (groups B [regular instrumentation] and D [over-instrumentation]) and, also, in the absence of without BMP (control groups A [regular instrumentation] and C [over-instrumentation]). After 4 weeks, the animals were euthanized. The bone blocks containing the implants were embedded in methyl methacrylate and sectioned parallel to the long axis of the implant, which were analyzed by image segmentation. The data were analyzed using a nonparametric statistical method. Results: We observed that Group A had a mean bone formation of 35.6% compared to Group B, which had 48.6% (p > 0.05). Moreover, this group showed 28.3% of connective tissue compared to Group A, with 39.3%. In the over-instrumented groups, rhBMP-7 (Group D) showed an enhanced and significant increase in bone formation when compared with the group without rhBMP-7 (Group C). Conclusion: We concluded that the association of rhBMP-7 to thin nanostructure HA-coated implants promoted greater new bone area than the same implants in the absence of rhBMP-7, mainly in cases of over-instrumented implant sites.

Distally Tilted Implants According to the All-on-Four® Treatment Concept for the Rehabilitation of Complete Edentulism: A 3.5-Year Retrospective Radiographic Study of Clinical Outcomes and Marginal Bone Level Changes

Bone grafting procedures during the use of dental implants may be avoided by the use of tilted implants in the maxilla and the mandible; advantages of angled implants are associated with the extension of the distal cantilever, leading to better implant survival rates. However, the bending effect on the single tilting implants may increase the marginal bone stress. The purpose of the present study was to retrospectively assess the clinical success and proximal bone loss rate following the implantation of distally tilted implants according to the All-on-Four™ prosthetic concept—based on radiographic findings—in a single-center experience, in addition to the assessment of the outcomes in the context of various clinico-epidemiological correlates. During the study period, n = 36 patients (24 males and 12 females) with complete records of periapical radiographs, received a full-arch fixed bridge supported by two axial and two distal tilted implants; overall n = 144 and n = 144 implants (Nobel B) were place in the maxilla and mandibles of patients, respectively. Mean age of patients at the time of fixture installation was 58.75 ± 13.71 years; n =11 patients presented with relevant underlying conditions/habits. To assess peri-implant bone-level changes, matched and calibrated orthopantomogram (OPT) images were taken at follow-ups after 1.5 years, 2.5 years, and 3.5 years post-restoration, and marginal bone levels were assessed on the mesio- (MA) and disto-approximal (DA) aspects. All implants were successful, resulting in a 100% overall survival rate. The radiographic mean bone loss levels at baseline (mean ± SEM) were 0.181 ± 0.011 mm and 0.178 ± 0.017 mm in the maxilla and mandible, respectively, while by the 3.5-year mark, bone loss was 0.770 ± 0.029 mm and 0.713 ± 0.026 mm in the maxilla and mandible (p > 0.05), respectively; bone-level changes were significant over time (p = 0.035 and p = 0.033). Peri-implant bone loss was more aggressive around titled distal implants versus mesial actual position implants. The effect of smoking and other underlying conditions showed significantly higher (p < 0.05) bone resorption levels when assessed on an individual implant-level, while during patient-level analysis, only a tendency was shown for higher bone loss rates for both MA and DA implants (p > 0.05). Within its limitations, our study has concluded that the use of All-on-Four™ prosthetic concept for total arch rehabilitation yields higher bone loss in association with tilted implants and, in some cases, on the MA surfaces at vertically positioned implants after >40 months in function.