Anatomical Engineering and 3D Printing for Surgery and Medical Devices: International Review and Future Exponential Innovations

Contemporary Treatment of Microtia-Atresia

Microtia-atresia is a congenital deformity affecting the external ear and ear canal that can present with varying degrees of severity and morbidity. Treatment occurs along a spectrum and primarily centers on improving aesthetic appearance. Many cases of microtia will not be effectively treated with conservative measures and will require some form of reconstruction. There are several options available, including porous polyethylene implants, autologous rib grafting, and autologous chondrocyte frameworks. Equally significant is the treatment of hearing loss, as many patients with microtia-atresia will have a component of conductive hearing loss. This article aims to comprehensively review contemporary treatment modalities for microtia-atresia and discuss the advantages, disadvantages, and practicality of each. Treatment and reconstruction often take a multidisciplinary and multistaged approach to achieve optimal results, with ideal management determined by each patient's individualized needs.

In-and-out Technique: An In-house Efficient Predictive Hole Fabrication Workflow

Virtual surgical planning (VSP) and three-dimensional (3D) printing can increase precision and reduce surgical time in craniofacial reconstruction. However, the elevated cost and manufacturing time of outsourced workflows is increasing the development of in-house solutions. One of the main challenges in in-house workflows is to create cutting guides that hold plate position information. This is due to the fact that hospitals usually lack the infrastructure required to design and 3D print custom-made plates. Including plate-positioning information in resection guides is especially relevant in complex reconstructions and when tumor extension limits plate placement before resection. Current in-house workflows revolve around the idea of 3D scanning the bent plate's shape and to fuse it with the VSP. The goal of this article is to share our technique to transfer plate position information to resection guides. Our protocol uses a 3D model of the reconstruction as an intermediate step to transfer the plate position of a bent stock reconstruction plate to cutting guides. Two patients who required mandibular reconstruction with fibula flap are presented to illustrate the technique. This workflow requires a 3D-printed model of the desired outcome, cutting guides, and a stock plate. Results were satisfactory in terms of cutting location and angulation, plate adaptation and condylar position. This technique allows for a simple, safe, cheap, and quick alternative to add reconstruction plate information to cutting guides.

Radiological Insights into Sacroiliitis: A Narrative Review

Sacroiliitis is the inflammation of the sacroiliac joint, the largest axial joint in the human body, contributing to 25% of lower back pain cases. It can be detected using various imaging techniques like radiography, MRI, and CT scans. Treatments range from conservative methods to invasive procedures. Recent advancements in artificial intelligence offer precise detection of this condition through imaging. Treatment options range from physical therapy and medications to invasive methods like joint injections and surgery. Future management looks promising with advanced imaging, regenerative medicine, and biologic therapies, especially for conditions like ankylosing spondylitis. We conducted a review on sacroiliitis using imaging data from sources like PubMed and Scopus. Only English studies focusing on sacroiliitis's radiological aspects were included. The findings were organized and presented narratively.

3D print model for surgical planning in a case of recurrent osteoblastic osteosarcoma of the left maxilla. A case report

Osteosarcoma (OS) of the head and neck is a rare and aggressive disease characterized by the formation of osteoid by malignant osteoblasts. The mandible or maxilla are the most common sites of presentation. Radiologically, these tumors show considerable, destructive growth with periosteal reaction, which can suggest the diagnosis of OS. 3D printing, as an emerging technology, can play a role in orthopedic oncology by providing patient-specific 3D printed models to improve surgical planning and facilitate patient understanding. We present the case of a male in his early 30s with a final histological diagnosis of recurrent osteosarcoma of the left maxilla, where a 3D printed model was helpful for the diagnostic workup, surgical planning, and the procedure.

Empowering Precision Medicine: The Impact of 3D Printing on Personalized Therapeutic

This review explores recent advancements and applications of 3D printing in healthcare, with a focus on personalized medicine, tissue engineering, and medical device production. It also assesses economic, environmental, and ethical considerations. In our review of the literature, we employed a comprehensive search strategy, utilizing well-known databases like PubMed and Google Scholar. Our chosen keywords encompassed essential topics, including 3D printing, personalized medicine, nanotechnology, and related areas. We first screened article titles and abstracts and then conducted a detailed examination of selected articles without imposing any date limitations. The articles selected for inclusion, comprising research studies, clinical investigations, and expert opinions, underwent a meticulous quality assessment. This methodology ensured the incorporation of high-quality sources, contributing to a robust exploration of the role of 3D printing in the realm of healthcare. The review highlights 3D printing's potential in healthcare, including customized drug delivery systems, patient-specific implants, prosthetics, and biofabrication of organs. These innovations have significantly improved patient outcomes. Integration of nanotechnology has enhanced drug delivery precision and biocompatibility. 3D printing also demonstrates cost-effectiveness and sustainability through optimized material usage and recycling. The healthcare sector has witnessed remarkable progress through 3D printing, promoting a patient-centric approach. From personalized implants to radiation shielding and drug delivery systems, 3D printing offers tailored solutions. Its transformative applications, coupled with economic viability and sustainability, have the potential to revolutionize healthcare. Addressing material biocompatibility, standardization, and ethical concerns is essential for responsible adoption.

Three-Dimensional Printing of Graphene Oxide/Poly-L-Lactic Acid Scaffolds Using Fischer-Koch Modeling

Accurately printing customizable scaffolds is a challenging task because of the complexity of bone tissue composition, organization, and mechanical behavior. Graphene oxide (GO) and poly-L-lactic acid (PLLA) have drawn attention in the field of bone regeneration. However, as far as we know, the Fischer-Koch model of the GO/PLLA association for three-dimensional (3D) printing was not previously reported. This study characterizes the properties of GO/PLLA-printed scaffolds in order to achieve reproducibility of the trabecula, from virtual planning to the printed piece, as well as its response to a cell viability assay. Fourier-transform infrared and Raman spectroscopy were performed to evaluate the physicochemical properties of the nanocomposites. Cellular adhesion, proliferation, and growth on the nanocomposites were evaluated using scanning electron microscopy. Cell viability tests revealed no significant differences among different trabeculae and cell types, indicating that these nanocomposites were not cytotoxic. The Fischer Koch modeling yielded satisfactory results and can thus be used in studies directed at diverse medical applications, including bone tissue engineering and implants.

Contribution of 3D printing for the surgical management of jaws cysts and benign tumors: A systematic review of the literature

BACKGROUND

Three-dimensional (3D) printing is now a widely recognized surgical tool in oral and maxillofacial surgery. However, little is known about its benefits for the surgical management of benign maxillary and mandibular tumors and cysts.

PURPOSE

The objective of this systematic review was to assess the contribution of 3D printing in the management of benign jaw lesions.

METHODS

A systematic review, registered in PROSPERO, was conducted using PubMed and Scopus databases, up to December 2022, by following PRISMA guidelines. Studies reporting 3D printing applications for the surgical management of benign jaw lesions were considered.

RESULTS

This review included thirteen studies involving 74 patients. The principal use of 3D printing was to produce anatomical models, intraoperative surgical guides, or both, allowing for the successful removal of maxillary and mandibular lesions. The greatest reported benefits of printed models were the visualization of the lesion and its anatomical relationships to anticipate intraoperative risks. Surgical guides were designed as drilling locating guides or osteotomy cutting guides and contributed to decreasing operating time and improving the accuracy of the surgery.

CONCLUSION

Using 3D printing technologies to manage benign jaw lesions results in less invasive procedures by facilitating precise osteotomies, reducing operating times, and complications. More studies with higher levels of evidence are needed to confirm our results.

The Progress in Bioprinting and Its Potential Impact on Health-Related Quality of Life

The intensive development of technologies related to human health in recent years has caused a real revolution. The transition from conventional medicine to personalized medicine, largely driven by bioprinting, is expected to have a significant positive impact on a patient's quality of life. This article aims to conduct a systematic review of bioprinting's potential impact on health-related quality of life. A literature search was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive literature search was undertaken using the PubMed, Scopus, Google Scholar, and ScienceDirect databases between 2019 and 2023. We have identified some of the most significant potential benefits of bioprinting to improve the patient's quality of life: personalized part production; saving millions of lives; reducing rejection risks after transplantation; accelerating the process of skin tissue regeneration; homocellular tissue model generation; precise fabrication process with accurate specifications; and eliminating the need for organs donor, and thus reducing patient waiting time. In addition, these advances in bioprinting have the potential to greatly benefit cancer treatment and other research, offering medical solutions tailored to each individual patient that could increase the patient's chance of survival and significantly improve their overall well-being. Although some of these advancements are still in the research stage, the encouraging results from scientific studies suggest that they are on the verge of being integrated into personalized patient treatment. The progress in bioprinting has the power to revolutionize medicine and healthcare, promising to have a profound impact on improving the quality of life and potentially transforming the field of medicine and healthcare.

Biomimetic Design of a Tendon-Driven Myoelectric Soft Hand Exoskeleton for Upper-Limb Rehabilitation

Degenerative diseases and injuries that compromise hand movement reduce individual autonomy and tend to cause financial and psychological problems to their family nucleus. To mitigate these limitations, over the past decade, hand exoskeletons have been designed to rehabilitate or enhance impaired hand movements. Although promising, these devices still have limitations, such as weight and cost. Moreover, the movements performed are not kinematically compatible with the joints, thereby reducing the achievements of the rehabilitation process. This article presents the biomimetic design of a soft hand exoskeleton actuated using artificial tendons designed to achieve low weight, volume, and cost, and to improve kinematic compatibility with the joints, comfort, and the sensitivity of the hand by allowing direct contact between the hand palm and objects. We employed two twisted string actuators and Bowden cables to move the artificial tendons and perform the grasping and opening of the hand. With this configuration, the heavy part of the system was reallocated to a test bench, allowing for a lightweight set of just 232 g attached to the arm. The system was triggered by the myoelectric signals of the biceps captured from the user's skin to encourage the active participation of the user in the process. The device was evaluated by five healthy subjects who were asked to simulate a paralyzed hand, and manipulate different types of objects and perform grip strength. The results showed that the system was able to identify the intention of movement of the user with an accuracy of 90%, and the orthosis was able to enhance the ability of handling objects with gripping force up to 1.86 kgf.

A state-of-the-art guide about the effects of sterilization processes on 3D-printed materials for surgical planning and medical applications: A comparative study

Surgeons use different medical devices in the surgery, such as patient-specific anatomical models, cutting and positioning guides, or implants. These devices must be sterilized before being used in the operation room. There are many sterilization processes available, with autoclave, hydrogen peroxide, and ethylene oxide being the most common in hospital settings. Each method has both advantages and disadvantages in terms of mechanics, chemical interaction, and post-treatment accuracy. The aim of the present study is to evaluate the dimensional and mechanical effect of the most commonly used sterilization techniques available in clinical settings, i.e., Autoclave 121, Autoclave 134, and hydrogen peroxide (HPO), on 11 of the most used 3D-printed materials fabricated using additive manufacturing technologies. The results showed that the temperature (depending on the sterilization method) and the exposure time to that temperature influence not only the mechanical behavior but also the original dimensioning planned on the 3D model. Therefore, HPO is a better overall option for most of the materials evaluated. Finally, based on the results of the study, a recommendation guide on sterilization methods per material, technology, and clinical application is presented.

Three-Dimensional Printing in Neurosurgery: A Review of Current Indications and Applications and a Basic Methodology for Creating a Three-Dimensional Printed Model for the Neurosurgical Practice

Introduction Three-dimensional (3D) printing is an affordable aid that is useful in neurosurgery. It allows for better visualization and tactile appreciation of the individual anatomy and regions of interest and therefore potentially lowers the risk of complications. There are various applications of this technology in the field of neurosurgery. Materials and methods In this paper, we present a basic methodology for the creation of a 3D printed model using only open-source software for medical image editing, model generation, pre-printing preparation, and analysis of the literature concerning the practical use of this methodology. Results The literature review on the current applications of 3D printed models in neurosurgery shows that they are mostly used for preoperative planning, surgical training, and simulation, closely followed by their use in patient-specific implants and instrumentation and medical education. Materialise^TM Mimics is the most frequently used commercial software for a 3D modeling for preoperative planning and surgical simulation, while the most popular open-source software for the same applications is 3D Slicer. In this paper, we present the algorithm that we employ for 3D printing using Horos^TM, Blender, and Cura software packages which are all free and open-source. Conclusion Three-dimensional printing is becoming widely available and of significance to neurosurgical practice. Currently, there are various applications of this technology that are less demanding in terms of technical knowledge and required fluency in medical imaging software. These predispositions open the field for further research on the possible use of 3D printing in neurosurgery.