Enhancement of Alkaline Protease Activity and Stability via Covalent Immobilization onto Hollow Core-Mesoporous Shell Silica Nanospheres

Valorization of chicken feather waste using recombinant bacillus subtilis cells by solid-state fermentation for soluble proteins and serine alkaline protease production

Feather waste, a by-product of the poultry industry, is rich in proteins, peptides, and amino acids. Improper disposal of feathers can cause environmental pollution. Solid-state fermentation (SSF) is a viable alternative to submerged fermentation due to its simplicity, productivity, and lower cost. The study goal is a biorefinery of chicken feather waste supplemented with wheat bran using a recombinant Bacillus subtilis strain to produce soluble proteins and a serine alkaline protease. Plackett-Burman Design and Central Composite Design were utilized in a statistical-mathematical model to optimize the process. Multi-factorial design optimization resulted in 80 % substrate degradation efficiency, an alkaline protease with dual activities (1423 proteolytic units and 190 keratinolytic units), 214 mg soluble proteins/g substrate, and 87 % model validation. Scaling up the SSF process to 50 g of substrate significantly enhanced the end products of feather biodegradation to 1616 proteolytic units, 2844 keratinolytic units, and 127 mg soluble proteins/g substrate. AIM AND SCOPE OF THE MANUSCRIPT: The aim of the present study is to utilize chicken feather waste (alone or supplemented with other materials) through recombinant Bacillus subtilis cells using solid state fermentation (SSF) at a laboratory scale. The plan study provides a promising waste management in the environmental field concerning biodegradation of such recalcitrant keratinous wastes supplemented with agricultural residues via recombinant microorganism. On semi-pilot scale, high production and quality of soluble protein, protease, and keratinase activity were produced according to the statistically optimised first stage fermentation in the laboratory scale. The bioconversion process took place as a major goal to obtain valuable products, with low utilities and energy requirements. Therefore, this will consider as an economically feasible and environmentally friendly alternative. Moreover, this study is considered as first step fermentation for feather waste to pave the road for directing it to a second step fermentation for biogas production and bioenergy generation through bio-electrochemical systems (Manuscript under publication).

Study of nano-hydroxyapatite tagged alkaline protease isolated from Himalayan sub-alpine Forest soil bacteria and role in recalcitrant feather waste degradation

Purified calcium serine metalloprotease from Stenotrophomonas maltophilia strain SMPB12 exhibits highest enzyme activity at pH 9 and temperature range between 15 °C-25 °C. Enzyme supplemented with 40 μM Ca-Hap-NP (NP-protease) showed maximum elevated activity of 17.29 μmole/min/ml (1.9-fold of original protease activity). The thermostability of the enzyme was maintained for 1 h at 60 °C over an alkaline pH range 7.5-10, as compared to the NP untreated enzyme whose activity was of 8.97 μmole/min/ml. A significant loss of activity with EDTA (1.05 μmole/min/ml, 11.75 %), PMSF (0.93 μmole/min/ml, 10.46 %) and Hg2+ (3.81 μmole/min/ml, 42.49 %) was also observed. Kinetics study of NP-protease showed maximum decreases in Km (28.11 %) from 0.28 mM (NP untreated enzyme) to 0.22 mM (NP-protease) along with maximum increase in Vmax (42.88 %) from 1.25 μmole/min/ml to 1.79 μmole/min/ml at varying temperatures. The enhanced activity of NP-protease was able to efficiently degrade recalcitrant solid wastes like feather to produce value-added products like amino acids and helps in declogging recalcitrant solid wastes. The nano-enabled protease may be utilized in a smaller amount for degrading in bulk recalcitrant solid proteinaceous waste at 15 °C temperature as declogging agents providing an eco-friendly efficient process.

Biocatalytic Profiling of Free and Immobilized Partially Purified Alkaline Protease from an Autochthonous Bacillus aryabhattai Ab15-ES

Partially purified alkaline protease produced by an indigenous bacterial strain, Bacillus aryabhattai Ab15-ES, was insolubilized in alginate beads using an entrapment technique. Maximum entrapped enzyme activities of 68.76% and 71.06% were recorded at optimum conditions of 2% (w/v) sodium alginate and 0.3 M calcium chloride. Biochemical profiling of free and immobilized proteases was investigated by determining their activity and stability as well as kinetic properties. Both enzyme preparations exhibited maximum activity at the optimum pH and temperature of 8.0 and 50 °C, respectively. However, in comparison to the free enzyme, the immobilized protease showed improved pH stability at 8.0–9.0 and thermal stability at 40–50 °C. In addition, the entrapped protease exhibited a higher Vmax and increased affinity to the substrate (1.65-fold) than the soluble enzyme. The immobilized protease was found to be more stable than the free enzyme, retaining 80.88% and 38.37% of its initial activity when stored at 4 °C and 25 °C, respectively, for 30 d. After repeated use seven times, the protease entrapped in alginate beads maintained 32.93% of its original activity. These findings suggest the efficacy and sustainability of the developed immobilized catalytic system for various biotechnological applications.

Construction of porous chitosan macrospheres via dual pore-forming strategy as host for alkaline protease immobilization with high activity and stability

Fabrication of highly-efficient enzymatic supports having excellent affinity to enzymes and superior mass transfer properties is highly desirable for enzymatic bio-catalysis. Herein, newly engineered chitosan macrospheres having interconnected and interlaced network pores are prepared via dual pore-forming strategy and applied as novel host for the effective immobilization of alkaline protease. The synergetic effect of SiO₂ templates and gas-induced pore-forming agents play an important role in inhibiting the over-crosslinking of chitosan chains and promoting the elevation of interior porosity. Benefited from the highly exposed surface and abundant available binding sites, the as-developed porous support P₂CSM achieves a maximum loading capacity of 43.8 ± 0.8 mg/g and ultra-high activity recovery of 92.4 % for alkaline protease. P₂CSM is competent to effectively stabilize the structural conformation of alkaline protease from inactivation through the flexible covalent interaction. Considering these attributes, Protease@P₂CSM demonstrates remarkably better structural stability, reusability and SDS-resistance than free alkaline protease, as well as excellent proteolytic ability, and the residual activity of Protease@P₂CSM is evaluated as high as 70.3 % after 7 consecutive reuses. This work provides a promising avenue to construct highly-active enzyme-composites for widespread utilization in various practical applications.

Solvent tolerant enzymes in extremophiles: Adaptations and applications

Non-aqueous enzymology has always drawn attention due to the wide range of unique possibilities in biocatalysis. In general, the enzymes do not or insignificantly catalyze substrate in the presence of solvents. This is due to the interfering interactions of the solvents between enzyme and water molecules at the interface. Therefore, information about solvent-stable enzymes is scarce. Yet, solvent-stable enzymes prove quite valuable in the present day biotechnology. The enzymatic hydrolysis of the substrates in solvents synthesizes commercially valuable products, such as peptides, esters, and other transesterification products. Extremophiles, the most valuable yet not extensively explored candidates, can be an excellent source to investigate this avenue. Due to inherent structural attributes, many extremozymes can catalyze and maintain stability in organic solvents. In the present review, we aim to consolidate information about the solvent-stable enzymes from various extremophilic microorganisms. Further, it would be interesting to learn about the mechanism adapted by these microorganisms to sustain solvent stress. Various approaches to protein engineering are used to enhance catalytic flexibility and stability and broaden biocatalysis's prospects under non-aqueous conditions. It also describes strategies to achieve optimal immobilization with minimum inhibition of the catalysis. The proposed review would significantly aid our understanding of non-aqueous enzymology.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)₃(PO₄)₂] are straightforwardly prepared through mixing metal ion (Cu²⁺, Ca²⁺, Co²⁺ or Mn²⁺) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn₃(PO₄)₂ hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Enzyme Immobilization Technologies and Industrial Applications

Enzymes play vital roles in diverse industrial sectors and are essential components of many industrial products. Immobilized enzymes possess higher resistance to environmental changes and can be recovered/recycled easily when compared to the free forms. The primary benefit of immobilization is protecting the enzymes from the harsh environmental conditions (e.g., elevated temperatures, extreme pH values, etc.). The immobilized enzymes can be utilized in various large-scale industries, e.g., medical, food, detergent, textile, and pharmaceutical industries, besides being used in water treatment plants. According to the required application, a suitable enzyme immobilization technique and suitable carrier materials are chosen. Enzyme immobilization techniques involve covalent binding, encapsulation, entrapment, adsorption, etc. This review mainly covers enzyme immobilization by various techniques and their usage in different industrial applications starting from 1992 until 2022. It also focuses on the multiscale operation of immobilized enzymes to maximize yields of certain products. Lastly, the severe consequence of the COVID-19 pandemic on global enzyme production is briefly discussed.

Site-Specific Covalent Immobilization of Methylobacterium extorquens Non-Blue Laccse Melac13220 on Fe3O4 Nanoparticles by Aldehyde Tag

In the present study, the non-blue laccase Melac13220 from Methylobacterium extorquens was immobilized using three methods to overcome problems related to the stability and reusability of the free enzyme: entrapment of the enzyme with sodium alginate, crosslinking of the enzyme with glutaraldehyde and chitosan-, and site-specific covalent immobilization of the enzyme on Fe3O4 nanoparticles by an aldehyde tag. The site-specific covalent immobilization method showed the highest immobilization efficiency and vitality recovery. The optimum temperature of Melac13220 was increased from 65 °C to 80 °C. Immobilized Melac13220 showed significant tolerance to some organic solvents and maintained approximately 80% activity after 10 cycles of use. Differential scanning calorimetry (DSC) indicated that the melting temperature of the enzyme was increased (from 57 °C to 79 °C). Immobilization of Melac13220 also led to improvement in dye decolorization such that Congo Red was completely decolorized within 10 h. The immobilized enzyme can be easily prepared without purification, demonstrating the advantages of using the aldehyde tag strategy and providing a reference for the practical application of different immobilized laccase methods in the industrial field.

Industrial applications of immobilized nano-biocatalysts

Immobilized enzyme-based catalytic constructs could greatly improve various industrial processes due to their extraordinary catalytic activity and reaction specificity. In recent decades, nano-enzymes, defined as enzyme immobilized on nanomaterials, gained popularity for the enzymes' improved stability, reusability, and ease of separation from the biocatalytic process. Thus, enzymes can be strategically incorporated into nanostructured materials to engineer nano-enzymes, such as nanoporous particles, nanofibers, nanoflowers, nanogels, nanomembranes, metal-organic frameworks, multi-walled or single-walled carbon nanotubes, and nanoparticles with tuned shape and size. Surface-area-to-volume ratio, pore-volume, chemical compositions, electrical charge or conductivity of nanomaterials, protein charge, hydrophobicity, and amino acid composition on protein surface play fundamental roles in the nano-enzyme preparation and catalytic properties. With proper understanding, the optimization of the above-mentioned factors will lead to favorable micro-environments for biocatalysts of industrial relevance. Thus, the application of nano-enzymes promise to further strengthen the advances in catalysis, biotransformation, biosensing, and biomarker discovery. Herein, this review article spotlights recent progress in nano-enzyme development and their possible implementation in different areas, including biomedicine, biosensors, bioremediation of industrial pollutants, biofuel production, textile, leather, detergent, food industries and antifouling.

Understanding the Basis of Occurrence, Biosynthesis, and Implications of Thermostable Alkaline Proteases

The group of hydrolytic enzymes synonymously known as proteases is predominantly most favored for the class of industrial enzymes. The present work focuses on the thermostable nature of these proteolytic enzymes that occur naturally among mesophilic and thermophilic microbes. The broad thermo-active feature (40-80 °C), ease of cultivation, maintenance, and bulk production are the key features associated with these enzymes. Detailing of contemporary production technologies, and controllable operational parameters including the purification strategies, are the key features that justify their industrial dominance as biocatalysts. In addition, the rigorous research inputs by protein engineering and enzyme immobilization studies add up to the thermo-catalytic features and application capabilities of these enzymes. The work summarizes key features of microbial proteases that make them numero-uno for laundry, biomaterials, waste management, food and feed, tannery, and medical as well as pharmaceutical industries. The quest for novel and/or designed and engineered thermostable protease from unexplored sources is highly stimulating and will address the ever-increasing industrial demands.

Grafted carrageenan: alginate gel beads for catalase enzyme covalent immobilization

A new matrix formulation was devised for catalase immobilization. Carrageenan-alginate beads different ratios were developed and soaked into different ratios of CaCl₂-KCl as a hardening solution. The best formulation for loading capacity was selected, treated with polyethylene imine followed by glutaraldehyde and further studied. The best concentration of catalase for immobilization was 300U/ml and the best loading time was 6 h. The catalytic properties increased after immobilization and the immobilized catalase achieved optimum activity at a temperature range of 30-50 °C that was compared to the optimum activity of free catalase which occurred at 40 °C. Higher catalytic activity of immobilized catalase occurred at alkaline pHs than the free one which achieved optimum catalytic activity at neutral pH. A comparison between the kinetic parameters of immobilized and free catalase showed variation. The K _M and Vmax of the immobilized catalase were 2.4 fold and six times higher than those of free catalase. The results of the study indicate that the formulated matrix can be used as a good matrix for catalase enzyme in various industrial applications.

Exo-inulinase production from Aspergillus fumigatus NFCCI 2426: purification, characterization, and immobilization for continuous fructose production

Aspergillus fumigatus was found to produce thermostable exo-inulinase (EC 3.8.1.80; 38 U/ml) on inulin-rich infusions. Exo-inulinase (14.6 U/mg) was immobilized on glutaraldehyde activated Ca-alginate beads for continuous generation of fructose by hydrolyzing sucrose, chicory, and dandelion substrates. Immobilization of enzyme was confirmed by microscopic and spectroscopic techniques. The exo-inulinase was purified using ion-exchange (1.30-folds) and size-exclusion chromatography (2.71-folds). The purified exo-inulinase showed 64 kDa band on gel and was optimally active at 60 °C and pH 6.0. Kinetic constants, Km and Vmax of purified exo-inulinase, were 5.88 mM and 1.66 µM/min, respectively, and its relative activity was found to be enhanced (125.8%) in the presence of calcium ion. Immobilized preparation was utilized for continuous generation of fructose from chicory juice (26 to 70%) and dandelion root extracts (16 to 24%) by recycling upto five cycles, respectively. In comparison to other sweeteners, such as sucrose, fructose is considered as a healthy alternative. The present study demonstrated the use of immobilized exo-inulinase in continuous generation of fructose from some underutilized plant sources that can be used in food industry. PRACTICAL APPLICATION: Thermostable exo-inulinase produced by A. fumigatus was immobilized on calcium alginate matrix and was employed for continuous hydrolysis of chicory juice and dandelion root extract for generation of fructose syrup.

Immobilized Alcalase on Micron- and Submicron-Sized Alginate Beads as a Potential Biocatalyst for Hydrolysis of Food Proteins

Enzymatic hydrolysis of food proteins is convenient method to improve their functional properties and physiological activity. Herein, the successful covalent attachment of alcalase on alginate micron and submicron beads using the carbodiimide based chemistry reaction and the subsequent application of the beads for egg white and soy proteins hydrolysis were studied. In addition to the electrostatic extrusion technique (EE) previously used by others, the potential utilization of a novel ultrasonic spray atomization technique without drying (UA) and with drying (UAD) for alginate submicron beads production has been attempted. The immobilization parameters were optimized on microbeads obtained by EE technique (803 ± 23 µm) with respect to enzyme loading and alcalase activity. UA and UAD techniques resulted in much smaller particles (607 ± 103 nm and 394 ± 51 nm in diameter, respectively), enabling even higher enzyme loading of 671.6 ± 4 mg g−1 on the carrier and the highest immobilized alcalase activity of 2716.1 IU g−1 in the standard reaction. The UAD biocatalyst exhibited also better performances in the real food system based on egg white or soy proteins. It has been shown that the immobilized alcalase can be reused in seven successive soy protein hydrolysis cycles with a little decrease in the activity.

Stabilization and improved properties of Salipaludibacillus agaradhaerens alkaline protease by immobilization onto double mesoporous core-shell nanospheres

In this study, serine alkaline protease from halotolerant alkaliphilic Salipaludibacillus agaradhaerens strain AK-R was purified and immobilized onto double mesoporous core-shell silica (DMCSS) nanospheres. Covalent immobilization of AK-R protease onto activated DMCSS-NH₂ nanospheres was more efficient than physical adsorption and was applied in further studies. DMCSS-NH₂ nanospheres showed high loading capacity of 103.8 μg protein/mg nanospheres. Relative to free AK-R protease, the immobilized enzyme exhibited shifts in the optimal temperature and pH from 60 to 65 °C and pH 10.0 to 10.5, respectively. While the soluble enzyme retained 47.2% and 9.1% of its activity after treatment for 1 h at 50 and 60 °C, the immobilized protease maintained 87.7% and 48.3%, respectively. After treatment for 2 h at pH 5 and 13, the immobilized protease maintained 73.6% and 53.4% of its activity, whereas the soluble enzyme retained 32.9% and 1.4%, respectively. Furthermore, the immobilized AK-R protease showed significant improvement of enzyme stability in high concentration of NaCl, organic solvents, surfactants, and commercial detergents. In addition, the immobilized protease exhibited a very good operational stability, retaining 79.8% of its activity after ten cycles. The results clearly suggest that the developed immobilized protease system is a promising nanobiocatalyst for various protease applications.

Immobilization of the Highly Active UDP-Glucose Pyrophosphorylase From Thermocrispum agreste Provides a Highly Efficient Biocatalyst for the Production of UDP-Glucose

Biocatalysis that produces economically interesting compounds can be carried out by using free enzymes or microbial cells. However, often the cell metabolism does not allow the overproduction or secretion of activated sugars and thus downstream processing of these sugars is complicated. Here enzyme immobilization comes into focus in order to stabilize the enzyme as well as to make the overall process economically feasible. Besides a robust immobilization method, a highly active and stable enzyme is needed to efficiently produce the product of choice. Herein, we report on the identification, gene expression, biochemical characterization as well as immobilization of the uridine-5′-diphosphate-glucose (UDP-glucose) pyrophosphorylase originating from the thermostable soil actinobacterium Thermocrispum agreste DSM 44070 (TaGalU). The enzyme immobilization was performed on organically modified mesostructured cellular foams (MCF) via epoxy and amino group to provide a stable and active biocatalyst. The soluble and highly active TaGalU revealed a V_max of 1698 U mg^–1 (uridine-5′-triphosphate, UTP) and a K_m of 0.15 mM (UTP). The optimum reaction temperature was determined to be 50°C. TaGalU was stable at this temperature for up to 30 min with a maximum loss of activity of 65%. Interestingly, immobilized TaGalU was stable at 50°C for at least 120 min without a significant loss of activity, which makes this enzyme an interesting biocatalyst for the production of UDP-glucose.

Alcalase Microarray Base on Metal Ion Modified Hollow Mesoporous Silica Spheres as a Sustainable and Efficient Catalysis Platform for Proteolysis

The industrial exploitation of protease is limited owing to its sensitivity to environmental factors and autolysis during biocatalytic processes. In the present study, the alcalase microarray (Bacillus licheniformis, alcalase@HMSS-NH₂-Metal) based on different metal ions modified hollow mesoporous silica spheres (HMSS-NH₂-Metal) was successfully developed via a facile approach. Among the alcalase@HMSS-NH₂-Metal (Ca²⁺, Zn²⁺, Fe³⁺, Cu²⁺), the alcalase@HMSS-NH₂-Fe³⁺ revealed the best immobilization efficiency and enzymatic properties. This tailor-made nanocomposite immobilized alcalase on a surface-bound network of amino-metal complex bearing protein-modifiable sites via metal-protein affinity. The coordination interaction between metal ion and alcalase advantageously changed the secondary structure of enzyme, thus significantly enhanced the bioactivities and thermostability of alcalase. The as-prepared alcalase@HMSS-NH₂-Fe³⁺ exhibited excellent loading capacity (227.8 ± 23.7 mg/g) and proteolytic activity. Compared to free form, the amidase activity of alcalase microarray increased by 5.3-fold, the apparent kinetic constant V_max/K_m of alcalase@HMSS-NH₂-Fe³⁺ (15.6 min⁻¹) was 1.9-fold higher than that of free alcalase, and the biocatalysis efficiency increased by 2.1-fold for bovine serum albumin (BSA) digestion. Moreover, this particular immobilization strategy efficiently reduced the bioactivities losses of alcalase caused by enzyme leaking and autolysis during the catalytic process. The alcalase microarray still retained 70.7 ± 3.7% of the initial activity after 10 cycles of successive reuse. Overall, this study established a promising strategy to overcome disadvantages posed by free alcalase, which provided new expectations for the application of alcalase in sustainable and efficient proteolysis.

Recent Advances in Enzyme-Nanostructure Biocatalysts with Enhanced Activity

Owing to their unique physicochemical properties and comparable size to biomacromolecules, functional nanostructures have served as powerful supports to construct enzyme-nanostructure biocatalysts (nanobiocatalysts). Of particular importance, recent years have witnessed the development of novel nanobiocatalysts with remarkably increased enzyme activities. This review provides a comprehensive description of recent advances in the field of nanobiocatalysts, with systematic elaboration of the underlying mechanisms of activity enhancement, including metal ion activation, electron transfer, morphology effects, mass transfer limitations, and conformation changes. The nanobiocatalysts highlighted here are expected to provide an insight into enzyme–nanostructure interaction, and provide a guideline for future design of high-efficiency nanobiocatalysts in both fundamental research and practical applications.

Development of nano-silver alkaline protease bio-conjugate depilating eco-benign formulation by utilizing potato peel based medium

A new bio-conjugate nano-silver enzyme conjugate complex (BC-nAg-Akp) was formulated containing alkaline protease (Akp). The present research involved synthesis of nAg particles in acetone concentrated enzyme sol using 0.005 M AgNO₃ solution formed within interaction time of 24 h through photo catalysis. The BC-nAG-Akp composite exhibited 1.9-fold increase in enzyme activity. The formulation was characterized using techniques viz., SEM, SEM-EDS, TEM, and DLS spectroscopy. The TEM analysis revealed synthesis of silver nano rods with size dimensions ranging from 40 to 80 nm. Likewise, the mean hydrodynamic diameter was 114 nm with polydispersity index of 0.260 and had the largest diffusion constant of 4.28 × 10⁸ amongst the three forms of the formulation (crude, acetone concentrated and partially purified) on DLS characterization. The SEM-EDS analysis showed occurrence of 18.32 and 3.79%weight and %atom of Ag element respectively. The prepared formulation was investigated for its dehairing performance. The ideal dehairing was achieved at 37 °C after 12 h of treatment. The histopathological studies revealed that complete dehairing with minimal rarefication was achieved and was found perform better compared to the commercial Akp and control (crude enzyme) formulations.

Affinity-binding immobilization of D-amino acid oxidase on mesoporous silica by a silica-specific peptide

Enzyme immobilization is widely used for large-scale industrial applications. However, the weak absorption through physical methods limits the recovery ability. Here, affinity-binding immobilization of enzymes was explored using a silica-specific affinity peptide (SAP) as a fusion tag to intensify the binding force between the enzyme and mesoporous silica (MPS) carrier. D-amino acid oxidase (DAAO) of Rhodosporidium toruloides was used as a model enzyme. The optimal screened SAP (LPHWHPHSHLQP) was selected from a M13 phage display peptide library and fused to the C-terminal of DAAO to obtain fused DAAOs with one, two and three SAP tags, respectively. The activity of DAAO-SAP-MPS was superior comparing with DAAO-2SAP-MPS and DAAO-3SAP-MPS; meanwhile DAAO-SAP-MPS shows 36% higher activity than that of DAAO-MPS. Fusion with one SAP improved the thermal stability with a 10% activity increase for immobilized DAAO-SAP-MPS compared to that of DAAO-MPS at 50 °C for 3 h. Moreover, the activity recovery of immobilized DAAO-SAP-MPS was 25% higher in operation stability assessment after six-batch conversions of cephalosporin to glutaryl-7-amino cephalosporanic acid than that of DAAO-MPS.

A novel protease-immobilized carbon catalyst for the effective fragmentation of proteins in high-TDS wastewater generated in tanneries: Spectral and electrochemical studies

The aim of this study was to degrade proteins in high-total dissolved solids (TDS)-containing wastewater produced during the soaking process in tanneries (tannery-TDS wastewater) using a halotolerant protease-assisted nanoporous carbon catalyst (STPNPAC). A halotolerant protease was obtained from the halophile, Lysinibacillus macroides, using animal fleshing as the substrate. The protease was immobilized using ethylene diamine (EDA)/glutaraldehyde functionalized nanoporous activated carbon (EGNPAC). The optimum conditions for the immobilization of protease were determined as time (120 min), pH (6), protease concentration (575-600 U/g), EGNPAC size, salinity, and temperature (30 °C). The immobilization was confirmed by FTIR, TGA-DSC, SEM, and XRD analyses. The adsorption kinetics was consistent with a pseudo first order rate constant of 1.43 × 10^-2 min^-1. The thermodynamic parameters (ΔG, ΔH, and ΔS) confirmed the effective immobilization of the protease onto EGNPAC. STPNAPC was found to efficiently degrade the proteins in tannery-TDS wastewater, with a complete fragmentation time of 90 min at pH 6 and 30 °C. Accordingly, the protein fragmentation was confirmed by UV-visible and UV-fluorescence spectroscopy, ESI-mass spectrometric analysis and circular dichroic studies. The formation of protein hydrolysates was confirmed by cyclic voltammetry and electrical impedance studies. BOD₅: COD value, 0.426 of treated tannery-TDS wastewater may favor sequential biological treatment processes.

Catalytic, kinetic and thermodynamic properties of free and immobilized caseinase on mica glass-ceramics

Bacillus megaterium 314 strain was able to utilize agricultural and industrial wastes for metallo-protease production. Orange peel and wheat bran were found as the most suitable carbon and nitrogen sources, respectively. Optimized production process enhanced the enzyme production by 5.1-folds. Glass and glass-ceramic with different particle sizes based on mica were used as inorganic carrier. Protease enzyme was immobilized by covalent bonding and physical adsorption methods on nanoparticle supports. Enzyme physically adsorbed on glass ceramic (particle size 0.71-1.0 mm) had the highest residual activity and the highest immobilization yield. Glass-ceramic was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Immobilized enzyme exhibited activation energy (E a ) and deactivation rate constant at 60 °C (k d ) about 1.29 and 1.46-times, respectively lower than free enzyme. Moreover, adsorbed enzyme had higher energy for denaturation (E d ), half-life (t 1/2 ), and decimal reduction time (D). The thermodynamic parameters of irreversible thermal denaturation for the protease enzyme indicate that immobilized enzyme had higher enthalpy (ΔH°), free energy (ΔG°), and entropy (ΔS°) than free one. There was a significant improvement in the maximum reaction velocity Vmax (2.5-fold), Michaelis constant Km (1.9-fold), and catalytic efficiency Vmax/Km (4.7-fold) values after immobilization indicating the efficiency and effectiveness of immobilization approach.

Selective and eco-friendly synthesis of lipoaminoacid-based surfactants for food, using immobilized lipase and protease biocatalysts

Lipoaminoacids, as surfactants, are an excellent option for food industry due to the currently trends in consumption of functional and natural ingredients. Synthesis of lauroyl glycine lipoaminoacid was carried out with a lipase from Pseudomonas stutzeri and a protease from Bacillus subtilis, which were immobilized in octyl-glyoxyl silica and glyoxyl-silica supports, respectively, comparing their catalytic performance. The enzymatic selectivity towards the lipoaminoacid instead of the dipeptide glycylglycine and synthesis yield were evaluated with respect to the characteristics of the immobilized biocatalysts and synthesis conditions. Three solvents were tested as reaction media for evaluating the expressed activity, stability and catalytic behavior during synthesis. Results indicate that both enzymes favor the lauroyl glycine synthesis over the peptide synthesis, but the immobilized protease has the best balance between selectivity and yield: 40% yield for lauroyl glycine and less than 5% for dipeptide after 96h of synthesis, at 45°C and acetone as solvent.

Enzyme Shielding in a Large Mesoporous Hollow Silica Shell for Improved Recycling and Stability Based on CaCO3 Microtemplates and Biomimetic Silicification

We report a novel "anchor-shield" approach for synthesizing a yolk-shell-structured biocatalytic system that consists of a phenylalanine ammonia lyase (PAL) protein particle core and a hollow silica shell with large mesopores by a combination of CaCO₃ microtemplates and biomimetic silicification. The method is established upon filling porous CaCO₃ cores with PAL via co-precipitation, controlled self-assembly and polycondensation of silanes, cross-link of the PAL molecules, and subsequent CaCO₃ dissolution. During this process, the self-assembled layer of cetyltrimethylammonium bromide served as a structure-directing agent of the mesostructure and directed the overgrowth of the mesostructured silica on the external surface of PAL/CaCO₃ hybrid microspheres; after CaCO₃ dissolution, the cross-linked PAL particles were encapsulated in the hollow silica shell. The hollow silica shell around the enzyme particles provided a "shield" to protect from biological, thermal, and chemical degradation for the enzyme. As a result, the recycling of the PAL enzyme was improved remarkably in comparison to adsorbed PAL on CaCO₃. PAL particles with a hollow silica shell still retained 60% of their original activity after 13 cycles, whereas adsorbed PAL on CaCO₃ microparticles lost activity after 7 cycles. Moreover, immobilized PAL exhibited higher stability against a proteolytic agent, denaturants, heat, and extreme pH than adsorbed PAL on CaCO₃ microparticles. These results demonstrated that the "anchor-shield" approach is an efficient method to obtain a stable and recycled biocatalyst with a yolk-shell structure.

Self-assembled hybrid nanomaterials with alkaline protease and a variety of metal ions

We have synthesized two kinds of hierarchical flower-like hybrid nanomaterials with alkaline protease and metal ions by self-assembly method.