Physicochemical and functional properties of short-chain fatty acid starch modified with different acyl groups and levels of modification

Rice and quinoa starches are modified with short-chain fatty acids (SCFA) with different SCFA acyl chain lengths and levels of modification. This work is aimed to investigate the impact of modifying rice and quinoa starches with short-chain fatty acids (SCFAs) on various physicochemical properties, including particle size, protein and amylose content, thermal behavior, pasting characteristics, and in vitro digestibility. Both native and SCFA-starches showed comparable particle sizes, with rice starches ranging from 1.58 to 2.22 μm and quinoa starches from 5.18 to 5.72 μm. SCFA modification led to lower protein content in both rice (0.218-0.255 %) and quinoa starches (0.537-0.619 %) compared to their native counterparts. Esterification led to the reduction of gelatinization and pasting temperatures as well as the hardness of the paste of SCFA-starches were reduced while paste clarity increased. The highest level of modification in SCFA-starch was associated with the highest amount of resistant starch fraction. Principal component analysis revealed that modification levels exerted a greater influence on starch properties than the types of SCFA used (acetyl, propionyl, and butyryl). These findings is importance in considering the degree of substitution or level of modification when tailoring starch properties through SCFA modification, with implications for various applications in food applications.

High-Pressure Pasteurization of Oat Okara

The issue of the short microbiological shelf life of residues from the plant-based beverage industry creates a large food waste problem. Today, the oat beverage residue, in this study referred to as oat okara, is generally converted to energy or used as animal feed. High-pressure pasteurization (200 MPa, 400 MPa, and 600 MPa) was applied to oat okara to investigate the effect on shelf life and microbiological activity. A 4-week microbiological storage study was performed and thermal properties, viscosity, and water and oil holding capacities were analyzed. The total aerobic count, including yeast and mold, was significantly reduced (p < 0.05) by 600 MPa after four weeks of storage at 4 °C. The content of lactic acid bacteria after four weeks of storage was low for untreated oat okara (3.2 log CFU/g) but, for 600 MPa, the content remained at the detection limit (2.3 log CFU/g). Conversely, the treatments of 200 MPa and 400 MPa increased the microbial content of the total aerobic count significantly (p < 0.05) after two weeks in comparison to untreated oat okara. The thermal properties of untreated and high-pressure-treated oat okara demonstrated an increase in protein denaturation of the 12S globulin, avenalin, when higher pressure was applied (400-600 MPa). This was also confirmed in the viscosity measurements where a viscosity peak for avenalin was only present for untreated and 200 MPa treated oat okara. The water holding capacity did not change as a function of high-pressure treatment (3.5-3.8 mL/g) except for the treatment at 200 MPa, which was reduced (2.7 mL/g). The oil holding capacity was constant (1.2-1.3 mL/g) after all treatments. High-pressure pasteurization of 600 MPa reduced the microbial content in oat okara resulting in a shelf life of 2-4 weeks. However, more research is required to identify the microorganisms in oat okara to achieve a microbiologically safe product that can be used for food applications.

High-Pressure Pasteurization of Soy Okara

Okara is a by-product from the production of soy beverages, which has a high content of protein and fiber. Even though it has a high nutritional value, it is generally discarded or used as animal feed or compost. The problem is its short shelf life due to its high water content and high water activity. The aim of this study was to investigate the effect of high-pressure pasteurization at 200 MPa, 400 MPa, and 600 MPa on the shelf life of soy okara. Microbiological growth, as well as thermal properties, viscosity, water holding capacity, and oil holding capacity, was evaluated after the pressure treatments. Treatment at 600 MPa significantly reduced (p < 0.05) the growth of total aerobic count, yeast and mold, and lactic acid bacteria for up to four weeks of storage at 4 °C. The pasting properties were increased while the water and oil holding capacities of the soy okara did not significantly change (p > 0.05) after high-pressure pasteurization at 400 MPa and 600 MPa. High-pressure pasteurization is therefore a potential application technique for soy okara to produce a microbiologically safe product with maintained functional properties. However, more research is needed to optimize the process and to further investigate the microbiological species present in untreated soy okara to exclude any potential food safety risks.

Development and characterization of medium and high internal phase novel multiple Pickering emulsions stabilized by hordein nanoparticles

Medium and high internal phase W₁/O/W₂ multiple Pickering emulsions (MPEs) were fabricated by physically-modified hordein nanoparticles. A triphasic system was developed at dispersed phase volume fraction (Φ) of 0.5 with an overrun value of ∼40%. No overrun was detected in high internal phase MPEs (Φ 0.8). Optical and confocal laser scanning microscopy confirmed the formation of MPEs. Monomodal droplet size distribution with a mean diameter of 32.90 and 21.48 μm was observed for MPEs at Φ 0.5 and Φ 0.8, respectively. Static multiple light scattering confirmed that creaming was the main mechanism behind the instability of MPEs. Both MPEs revealed pseudo-plastic behavior and predominant storage modulus (G') over the applied frequency range. The encapsulation efficiency of vitamin B₁₂ in MPEs was 98.3% and remained relatively constant during 28 d. These results suggested the excellent potential of hordein nanoparticles as appropriate candidate for designing multi-structural colloidal systems using plant proteins.

Resveratrol loaded Pickering emulsions stabilized by OSA modified rice starch granules

Resveratrol is a photosensitive, bioactive molecule which has received increasing research interest during the past decade for its antioxidant properties. However, it has low solubility in water or common triglyceride oils. Resveratrol solubilization in oil can only be achieved in essential oils, such as flavour oils, but the stability of emulsions produced with this type of oils is low as they are prone to creaming phenomena and Oswald ripening. In this study, resveratrol was first dissolved in orange oil which was mixed into a medium-chain triglyceride (Miglyol) at different ratios and used as the internal phase of oil-in-water emulsions (O/W). The emulsions were stabilized by octenyl succinic anhydride (OSA) modified rice starch granules using two different ratios of starch particle:oil to study the influence of interfacial coverage on the final emulsion droplet size and emulsion stability. The results of this study indicated that stable Pickering emulsions could be prepared using OSA-modified rice starch granules even at partial coverage conditions. Emulsions prepared at an oil fraction of 0.5 using 30% v/v mixture of orange oil in Miglyol as the dispersed phase seemed to be an appropriate resveratrol carrier system, obtaining encapsulation efficiency values close to 90% which results in emulsions with a resveratrol concentration of 8.45 mg/L. Hence, the emulsions prepared are suitable for food fortification applications.

Synthesis of controlled size starch nanoparticles (SNPs)

Starch nanoparticles (SNPs) are a promising choice for the strategic development of new renewable and biodegradable nanomaterials for novel biomedical and pharmaceutical applications when loaded with antibiotics or with anticancer agents as target drug delivery systems. The final properties of the SNPs are strongly influenced by the synthesis method and conditions being a controlled and monodispersed size crucial for these applications. The aim of this work was to synthesize controlled size SNPs through nanoprecipitation and microemulsion methods by modifying main operating parameters regarding the effect of amylose and amylopectin ratio in maize starches. SNPs were characterized by size and shape. SNPs from 59 to 118 nm were obtained by the nanoprecipitation method, registering the higer values when surfactant was added to the aqueous phase. Microemulsion method led to 35-147 nm sizes observing a higher particle formation capacity. The composition of the maize used influenced the final particle size and shape.

Starch granule stabilized Pickering emulsions: an 8-year stability study

BACKGROUND

Pickering emulsions are known to have advantages over conventional emulsions, in particular, improved and long-term stability against coalescence. This research is an eight-year stability investigation of oil-in-water Pickering emulsions stabilized by quinoa starch granules modified by octenyl succinic anhydride (OSA). Two different concentrations of starch (i.e. 200 and 600 mg mL^-1 based on oil) were used at oil fraction (ϕ) of 0.1. The emulsions were prepared using a high-pressure homogenizer. The emulsions were stored in a refrigerator (at 6 °C) and evaluated using particle size analyzer over the storage period and light microscopy at the end of the storage period.

RESULTS

Starch granule stabilized Pickering emulsions produced by a high-pressure homogenizer displayed remarkable storage stability over the eight years with no indication of coalescence. In addition, the results showed that increasing the concentration of starch granules resulted in a decrease in droplet sizes. The sizes measured by the particle size analyzer showed a decline over the storage period which was due to dissociation of some networks of aggregated droplets that, in addition to representing smaller droplet sizes, resulted in the release of free and unbound starch entrapped in these networks.

CONCLUSIONS

This study showed that Pickering emulsions produced by OSA modified starch granules from quinoa can be used in practical applications for the development of highly stable formulations when prolonged storage is required. © 2020 Society of Chemical Industry.

Comparison of Three Methods to Determine the Degree of Substitution of Quinoa and Rice Starch Acetates, Propionates, and Butyrates: Direct Stoichiometry, FTIR, and 1H-NMR

Rice and quinoa starch esters were prepared by acylation using short-chain fatty acid anhydrides with different chain lengths (acetic, propionic, and butyric anhydride). A direct stoichiometric method based on the acylation reaction was used to determine the degree of substitution (DS) and acyl content (AC). In addition, Fourier-transform infrared spectroscopy (FTIR) was used to validate the conformational changes of acylated starch and 1H-NMR was used as a DS reference method. DS by stoichiometric calculation was shown to be in agreement with FTIR and was comparable with DS obtained from Proton nuclear magnetic resonance (1H-NMR). Based on this study, stoichiometric calculation allows rapid and direct determination of substitution levels and acyl content without the loss of samples, which provides efficiency and optimization of manufacturing procedures in producing the desired level of esterified starches.

In Vitro Methods to Study Colon Release: State of the Art and An Outlook on New Strategies for Better In-Vitro Biorelevant Release Media

The primary focus of this review is a discussion regarding in vitro media for colon release, but we also give a brief overview of colon delivery and the colon microbiota as a baseline for this discussion. The large intestine is colonized by a vast number of bacteria, approximately 1012 per gram of intestinal content. The microbial community in the colon is complex and there is still much that is unknown about its composition and the activity of the microbiome. However, it is evident that this complex microbiota will affect the release from oral formulations targeting the colon. This includes the release of active drug substances, food supplements, and live microorganisms, such as probiotic bacteria and bacteria used for microbiota transplantations. Currently, there are no standardized colon release media, but researchers employ in vitro models representing the colon ranging from reasonable simple systems with adjusted pH with or without key enzymes to the use of fecal samples. In this review, we present the pros and cons for different existing in vitro models. Furthermore, we summarize the current knowledge of the colonic microbiota composition which is of importance to the fermentation capacity of carbohydrates and suggest a strategy to choose bacteria for a new more standardized in vitro dissolution medium for the colon.

Pickering emulsifiers based on hydrophobically modified small granular starches Part II - Effects of modification on emulsifying capacity

Small granular starches from rice, quinoa, and amaranth were modified with octenyl succinic anhydride (OSA) at 5 defined intervals (0-3.0%) and investigated with respect to emulsifying capacity and stability. Starch granule surfaces were characterized by Brunauer-Emmett-Teller and contact angle measurements. Emulsifying capacity was characterized by multiple light scattering (MLS) and particle size analysis. Stability towards environmental stress was characterized by centrifugation and MLS. Surface hydrophobicity and emulsifying capacity correlated with starch type and modification level. Quinoa stabilized emulsions had the smallest droplet size (e.g. 59.2 μm at 3.0% OSA) and superior stability, both before and after centrifugation, especially at the lowest modification levels. Rice and amaranth had larger droplets (99.8 and 84.1 μm at 3.0% OSA respectively). Amaranth, despite its small size showed poorer performance than quinoa, especially at lower modification levels. The higher emulsifying efficiency of quinoa starch granules attributed to the higher protein content.

Rice Starch Particle Interactions at Air/Aqueous Interfaces-Effect of Particle Hydrophobicity and Solution Ionic Strength

Starch particles modified by esterification with dicarboxylic acids to give octenyl succinic anhydride (OSA) starch is an approved food additive that can be used to stabilize oil in water emulsions used in foods and drinks. However, the effects of the OSA modification of the starch particle on the interfacial interactions are not fully understood. Here, we directly measured the packing of films of rice starch granules, i.e., the natural particle found inside the plant, at air/aqueous interfaces, and the interaction forces in that system as a function of the particle hydrophobicity and ionic strength, in order to gain insight on how starch particles can stabilize emulsions. This was achieved by using a combined Langmuir trough and optical microscope system, and the Monolayer Interaction Particle Apparatus. Native rice starch particles were seen to form large aggregates at air/water interfaces, causing films with large voids to be formed at the interface. The OSA modification of the rice starches particles decreased this aggregation. Increasing the degree of modification improved the particle packing within the film of particles at the air/water interface, due to the introduction of inter-particle electrostatic interactions within the film. The introduction of salt to the water phase caused the particles to aggregate and form holes within the film, due to the screening of the charged groups on the starch particles by the salt. The presence of these holes in the film decreased the stiffness of the films. The effect of the OSA modification was concluded to decrease the aggregation of the particles at an air/water interface. The presence of salts, however, caused the particles to aggregate, thereby reducing the strength of the interfacial film.

Pickering emulsifiers based on hydrophobically modified small granular starches - Part I: Manufacturing and physico-chemical characterization

Small granular starches from rice, quinoa and amaranth were hydrophobized by esterification with octenyl succinic anhydride (OSA) in an aqueous alkaline slurry to obtain series of modified starches at defined intervals (i.e. 0.6, 1.2, 1.8, 2.4, 3.0%). The physical and the physico-chemical properties of the starch particles were characterized by proximate analysis including protein level, amylose level and dry matter. The shape and size of the starch granules were characterized by scanning electron microscopy and light scattering. The gelatinization properties were characterized by differential scanning calorimetry. The degree of modification was determined by titration with NaOH. With regard to the emulsion formulation and in order to assess the emulsifying capacity of the small granular starches, the effect of starch type, degree of modification and starch concentration on the resulting emulsion droplet size were evaluated by light scattering and optical microscopy. Emulsifying properties were found to depend on the degree of substitution, size of the granules and the starch to oil ratio of the formulation. Quinoa starch granules, in general, had the best emulsifying capacity followed by amaranth and rice. However, in higher starch concentrations (>400mg/mL oil) and adequate levels of OSA (3.0%) amaranth performed best, having the smallest size of starches studied.

Comparative Emulsifying Properties of Octenyl Succinic Anhydride (OSA)-Modified Starch: Granular Form vs Dissolved State

The emulsifying ability of OSA-modified and native starch in the granular form, in the dissolved state and a combination of both was compared. This study aims to understand mixed systems of particles and dissolved starch with respect to what species dominates at droplet interfaces and how stability is affected by addition of one of the species to already formed emulsions. It was possible to create emulsions with OSA-modified starch isolated from Quinoa as sole emulsifier. Similar droplet sizes were obtained with emulsions prepared at 7% (w/w) oil content using OSA-modified starch in the granular form or molecularly dissolved but large differences were observed regarding stability. Pickering emulsions kept their droplet size constant after one month while emulsions formulated with OSA-modified starch dissolved exhibited coalescence. All emulsions stabilized combining OSA-modified starch in granular form and in solution showed larger mean droplet sizes with no significant differences with respect to the order of addition. These emulsions were unstable due to coalescence regarding presence of free oil. Similar results were obtained when emulsions were prepared by combining OSA-modified granules with native starch in solution. The degree of surface coverage of starch granules was much lower in presence of starch in solution which indicates that OSA-starch is more surface active in the dissolved state than in granular form, although it led to unstable systems compared to starch granule stabilized Pickering emulsions, which demonstrated to be extremely stable.