Physicochemical and protein characterization of lima bean (Phaseolus lunatus L) seed

Lima bean (Phaseolus lunatus L) is native to Latin America and has spread out worldwide, thus having a high level of diversity. The lima bean seed from a specific region might have different characteristics from others. This study was aimed to characterize the physicochemical and protein of the dry seed of lima bean from Indonesia based on its solubility, electrophoretic pattern, and amino acid profile. The result showed that carbohydrate (68.89±1.55%) was the major component, with starch (41.96±1.10%) as the predominant. The amylopectin was higher than amylose. Dietary fibre (27.87±0.37%) was significant and dominated by insoluble one (25.47±0.32%). The fat content (1.15±0.04%) was low and ash (3.67±0.47%) comprised of magnesium, phosphorus, potassium, calcium, and iron with the content of 184, 75, 38, 11, and 10 mg/100 g, respectively. Total phenolic compounds of this seed were 1.29±0.02 mg/g, phytic acid 11.57±0.03 mg/g, saponins 16.84±0.42 mg/g, and trypsin inhibitors 36.07±0.11 TIU/g. HCN was found significantly at 30.99±0.29 ppm. Oligosaccharides were 5.93±0.29% that comprised of raffinose 1.22±0.08% and stachyose 4.61±0.21%. Protein content was moderate (15.93±0.55%) that comprised of albumin 18.47±0.62%, globulin 56.20±2.00%, prolamin 3.14±0.20%, and glutelin 22.69±1.60%. The molecular weight of this protein was 10-141 kDa with 12 polypeptides. Globulin had 12 polypeptides of 10 to 124 kDa. Albumin had 18 to 116 kDa molecular weights, while glutelin had six polypeptides of 13 to 109 kDa. Prolamin did not have visible polypeptides. Lysine, leucine, valine, and phenylalanine were the primary essential amino acids with high lysine but low methionine and cysteine. In conclusion, lima bean seed is a source of carbohydrates and minerals, with a moderate protein content dominated by the globulin. The polypeptide profile of lima bean seed is varied depending on the protein fractions. The occurrence of antinutrition might hinder its utilization as a protein source. HCN as a toxicant should be removed to obtain a safe seed for consumption.

Internalization of Fluoride in Hydroxyapatite Nanoparticles

Hydroxyapatite (HAP) is a cost-effective material to remove excess levels of fluoride from water. Historically, HAP has been considered a fluoride adsorbent in the environmental engineering community. This paper substantiates an uptake paradigm that has recently gained disparate support: assimilation of fluoride to bulk apatite lattice sites in addition to surface lattice sites. Pellets of HAP nanoparticles (NPs) were packed into a fixed-bed media filter to treat solutions containing 30 mg-F/L (1.58 mM) at pH 8, yielding an uptake of 15.97 ± 0.03 mg-F/g-HAP after 864 h. Solid-state ¹⁹F and ¹³C magic-angle spinning nuclear magnetic resonance spectroscopy demonstrated that all removed fluoride is apatitic. A transmission electron microscopy analysis of particle size distribution, morphology, and crystal habit resulted in the development of a model to quantify adsorption and total fluoride capacity. Low- and high-estimate median adsorption capacities were 2.40 and 6.90 mg-F/g-HAP, respectively. Discrepancies between experimental uptake and adsorption capacity indicate the range of F^- that internalizes to satisfy conservation of mass. The model was developed to demonstrate that F^- internalization in HAP NPs occurs under environmentally relevant conditions and as a tool to understand the extent of F^- internalization in HAP NPs of any kind.

Biodegradable MRI Visible Drug Eluting Stent Reinforced by Metal Organic Frameworks

Metal-organic frameworks (MOFs) have applications in numerous fields. However, the development of MOF-based "theranostic" macroscale devices is not achieved. Here, heparin-coated biocompatible MOF/poly(ε-caprolactone) (PCL) "theranostic" stents are developed, where NH₂ -Materials of Institute Lavoisier (MIL)-101(Fe) encapsulates and releases rapamycin (an immunosuppressive drug). These stents also act as a remarkable source of contrast in ex vivo magnetic resonance imaging (MRI) compared to the invisible polymeric stent. The in vitro release patterns of heparin and rapamycin respectively can ensure a type of programmed model to prevent blood coagulation immediately after stent placement in the artery and stenosis over a longer term. Due to the presence of hydrolysable functionalities in MOFs, the stents are shown to be highly biodegradable in degradation tests under various conditions. Furthermore, there is no compromise of mechanical strength or flexibility with MOF compositing. The system described here promises many biomedical applications in macroscale theranostic devices. The use of MOF@PCL can render a medical device MRI-visible while simultaneously acting as a carrier for therapeutic agents.

Physical properties and cooking quality of extruded restructured rice: impact of water temperature and water level

Rice is the main food for approximately 3.5 billion people worldwide, especially in Asians, who have consumed more than 90% of the total rice produced. Restructured rice is another designation of artificial rice is an effort to diversify staple foods processed from carbohydrate-based raw materials with the addition of certain substances to improve the quality of staple foods. Restructured rice can be done with several techniques, such as using extrusion. This study aimed to investigate the effect water content (35%, 37.5%, 40%, 42.5%, and 45%) and temperature (100oC and 26oC) on the surface and characteristics of restructured rice using a pasta extruder. Results of this study showed the treatment with water content 40% and temperature 100oC to be the best, more precisely seen from the results of laser microscope, color, WAI, WSI, WAR, Cooking losses, and cooking time. Pores and surfaces of restructured rice are almost the same as milled rice. Water absorption index (WAI) value = 2.273±0.10 g/g, WSI = 2.114±0.11%, WAR = 150.99±0.77%, CL = 1.92±0.10% and cooking time 4 mins. Suggestions for this research are further studies such as fortification with other ingredients using a pasta extruder technology and are expected to be implemented and commercialized.

Heteroatom substituted zeolite FAU with ultralow Al contents for liquid-phase oxidation catalysis

Titanium-substituted FAU stabilizes aromatic alkenes to greater extents than BEA and mesoporous silica.

Aromatic thermosetting copolyester bionanocomposites as reconfigurable bone substitute materials: Interfacial interactions between reinforcement particles and polymer network

Development of porous materials consisting of polymer host matrix enriched with bioactive ceramic particles that can initiate the reproduction of cellular organisms while maintaining in vivo mechanical reliability is a long-standing challenge for synthetic bone substitutes. We present hydroxyapatite (HA) reinforced aromatic thermosetting copolyester (ATSP) matrix bionanocomposite as a potential reconfigurable bone replacement material. The nanocomposite is fabricated by solid-state mixing a matching set of precursor oligomers with biocompatible pristine HA particles. During endothermic condensation polymerization reaction, the constituent oligomers form a mechanochemically robust crosslinked aromatic backbone while incorporating the HAs into a self-generated cellular structure. The morphological analysis demonstrates near-homogenous distributions of the pristine HAs within the matrix. The HAs behave as a crack-arrester which promotes a more deformation-tolerant formation with relatively enhanced material toughness. Chain relaxation dynamics of the nanocomposite matrix during glass transition is modified via HA-induced segmental immobilization. Chemical characterization of the polymer backbone composition reveals the presence of a hydrogen-advanced covalent interfacial coupling mechanism between the HAs and ATSP matrix. This report lays the groundwork for further studies on aromatic thermosetting copolyester matrix bionanocomposites which may find applications in various artificial bone needs.

Nanofiller-conjugated percolating conductive network modified polymerization reaction characteristics of aromatic thermosetting copolyester resin

Deliberately controlled interfacial interactions between incorporated nanofiller particles and host polymer backbone chains constitute a critical element in the realm of polymer nanocomposites with tailorable multifunctional properties. We demonstrate the physicochemical effects induced by graphene nanoplatelets (GNP) of different sizes on the condensation polymerization reaction of aromatic thermosetting copolyester (ATSP) through the formation of electrically conductive percolating networks as enabled by interfacial interactions. Carboxylic acid and acetoxy-capped precursor oligomers of ATSP are solid-state mixed with chemically pristine GNP particles at various loading levels. Upon in situ endothermic condensation polymerization reaction, crosslinked backbone of the ATSP foam matrix is formed while the carbonaceous nanofillers are incorporated into the polymer network via covalent conjugation with functional end-groups of the oligomers. The controlled GNP size promotes different electrical percolation thresholds and ultimate electrical conductivities. Microstructural analysis demonstrates GNP distributions in the matrix as well as morphological modifications induced by the formation of conductive percolating GNP networks. Cure characteristics reveal the thermochemical changes prompted in the polymerization processes for GNP content above the requirement for percolation formation. Chemical spectroscopy of the ATSP nanocomposite morphology exhibits the formation of a robust interfacial coupling mechanism between the GNPs and ATSP backbone. The findings here may guide the developmental efforts of nanocomposites through better identifying roles of the morphology and content of nanofillers in polymerization processes.

Physicochemical effects induced by graphene nanoplatelets on the in situ polycondensation reaction of aromatic thermosetting copolyester through the formation of conductive percolating network assembled via interfacial interactions.

Comprehensive Multiphase (CMP) NMR Monitoring of the Structural Changes and Molecular Flux Within a Growing Seed

A relatively recent technique termed comprehensive multiphase (CMP) NMR spectroscopy was used to investigate the growth and associated metabolomic changes of ¹³C-labeled wheat seeds and germinated seedlings. CMP-NMR enables the study of all phases in intact samples (i.e., liquid, gel-like, semisolid, and solid), by combining all required electronics into a single NMR probe, and can be used for investigating biological processes such as seed germination. All components, from the most liquid-like (i.e., dissolved metabolites) to the most rigid or solid-like (seed coat) were monitored in situ over 4 days. A wide range of metabolites were identified, and after 96 h of germination, the number of metabolites in the mobile phase more than doubled in comparison to 0 h (dry seed). This work represents the first application of CMP-NMR to follow biological processes in plants.

3D-Printed Multidrug-Eluting Stent from Graphene-Nanoplatelet-Doped Biodegradable Polymer Composite

Patients with percutaneous coronary intervention generally receive either bare metal stents or drug-eluting stents to restore the normal blood flow. However, due to the lack of stent production with an individual patient in mind, the same level of effectiveness may not be possible in treating two different clinical scenarios. This study introduces for the first time the feasibility of a patient-specific stenting process constructed from direct 3D segmentation of medical images using direct 3D printing of biodegradable polymer-graphene composite with dual drug incorporation. A biodegradable polymer-carbon composite is prepared doped with graphene nanoplatelets to achieve controlled release of combinatorics as anticoagulation and antirestenosis agents. This study develops a technology prototyped for personalized stenting. An in silico analysis is performed to optimize the stent design for printing and its prediction of sustainability under force exerted by coronary artery or blood flow. A holistic approach covering in silico to in situ-in vivo establishes the structural integrity of the polymer composite, its mechanical properties, drug loading and release control, prototyping, functional activity, safety, and feasibility of placement in coronary artery of swine.

A ratiometric NMR pH sensing strategy based on a slow-proton-exchange (SPE) mechanism

Real time and non-invasive detection of pH in live biological systems is crucial for understanding the physiological role of acid-base homeostasis and for detecting pathological conditions associated with pH imbalance. One method to achieve in vivo pH monitoring is NMR. Conventional NMR methods, however, mainly utilize molecular sensors displaying pH-dependent chemical shift changes, which are vulnerable to multiple pH-independent factors. Here, we present a novel ratiometric strategy for sensitive and accurate pH sensing based on a small synthetic molecule, SPE1, which exhibits exceptionally slow proton exchange on the NMR time scale. Each protonation state of the sensor displays distinct NMR signals and the ratio of these signals affords precise pH values. In contrast to standard NMR methods, this ratiometric mechanism is not based on a chemical shift change, and SPE1 binds protons with high selectivity, resulting in accurate measurements. SPE1 was used to measure the pH in a single oocyte as well as in bacterial cultures, demonstrating the versatility of this method and establishing the foundation for broad biological applications.

Comprehensive multiphase NMR spectroscopy of intact ¹³C-labeled seeds

Seeds are complex entities composed of liquids, gels, and solids. NMR spectroscopy is a powerful tool for studying molecular structure but has evolved into two fields, solution and solid state. Comprehensive multiphase (CMP) NMR spectroscopy is capable of liquid-, gel-, and solid-state experiments for studying intact samples where all organic components are studied and differentiated in situ. Herein, intact (13)C-labeled seeds were studied by a variety of 1D/2D (1)H/(13)C experiments. In the mobile phase, an assortment of metabolites in a single (13)C-labeled wheat seed were identified; the gel phase was dominated by triacylglycerides; the semisolid phase was composed largely of carbohydrate biopolymers, and the solid phase was greatly influenced by starchy endosperm signals. Subsequently, the seeds were compared and relative similarities and differences between seed types discussed. This study represents the first application of CMP-NMR to food chemistry and demonstrates its general utility and feasibility for studying intact heterogeneous samples.

Solid-state NMR: a powerful tool for characterization of metal-organic frameworks

Metal-organic frameworks (MOFs) are a new type of porous materials with numerous current and potential applications in many areas including ion-exchange, catalysis, sensing, separation, molecular recognition, drug delivery and, in particular, gas storage. Solid-state NMR (SSNMR) has played a pivotal role in structural characterization and understanding of host-guest interactions in MOFs. This article provides an overview on application of SSNMR to MOF systems.

Experimental and theoretical investigations of selenium nuclear magnetic shielding tensors in Se–N heterocycles

A preliminary study involving solid-state 77Se NMR spectroscopy and first principles calculations of 77Se NMR parameters in Se–N heterocycles is reported. 77Se CP/MAS NMR spectra of the ring systems reveal expansive selenium chemical shift (CS) tensors, which are extremely sensitive to molecular geometry, symmetry, ligand substitution, and intermolecular contacts. For systems with known crystal structures, hybrid density functional theory (DFT) calculations of selenium nuclear magnetic shielding (NMS) tensors were carried out, and tensor orientations in the molecular frames examined. Additional DFT calculations of selenium NMS tensors are presented, along with a detailed analysis of pairs of occupied and virtual molecular orbitals that give rise to the Se NMS tensors. A new naturalized local molecular orbital (NLMO) analysis under the same DFT framework is also discussed. Collectively, the NMR data and first principles calculations provide understanding of the influences of electronic structure, bonding, and intermolecular interactions on the selenium NMS tensors, allowing for (i) prediction of unknown molecular structures and (ii) insight into the positions of the stereochemically active selenium lone pairs.

A chitinase with high activity toward partially N-acetylated chitosan from a new, moderately thermophilic, chitin-degrading bacterium, Ralstonia sp. A-471

A moderately thermophilic bacterium, strain A-471, capable of degrading chitin was isolated from a composting system of chitin-containing waste. Analysis of the 16S rDNA sequence revealed that the bacterium belongs to the genus Ralstonia. A thermostable chitinase A ( Ra-ChiA) was purified from culture fluid of the bacterium grown in colloidal chitin medium. Purification of the enzyme was achieved mainly by exploiting its binding to the colloidal chitin. The molecular mass of the enzyme was estimated to be 70 kDa and the isoelectric point approximately 4.7. N-terminal amino acid sequencing revealed a sequence of ADPYLKVAYYP, which had high homology (66% identity) with that of chitinase A1 from Bacillus circulans WL-12. The pH and temperature optima were determined to be 5.0 and 70 degrees C, respectively. The enzyme was classified as a retaining glycosyl hydrolase and was most active against partially N-acetylated chitosans. Its activities towards the partially N-acetylated chitosans, i.e. chitosan 7B, chitosan 8B, and chitosan 9B, were about 11-fold, 9-fold, and 5-fold higher than towards colloidal chitin, respectively. Ra-ChiA cleaved (GlcNAc)6 almost exclusively into (GlcNAc)2. Activation of Ra-ChiA was observed by the addition of 1 mM Cu2+, Mn2+, Ca2+, or Mg2+. Degradation of the partially N-acetylated chitosan produced oligosaccharides with a degree of polymerization ranging from 1-8; these are products that offer potential application for functional oligosaccharide production.

Expression of a gene encoding chitinase (pCA 8 ORF) from Aeromonas sp. no. 10S-24 in Escherichia coli and enzyme characterization

A gene encoding chitinase from Aeromonas sp. no. 10S-24 was expressed using pTrc99A in Escherichia coli JM 105 which yielded a 5-fold higher activity than when pUC19 was used. Three different truncated enzymes (SA-1, SA-2 and SA-3) were obtained after purification. Their isoelectric points were 7.0, 6.9, and 6.7, respectively. The enzymes showed two optimum pHs, 4.0 and 7.0, when incubated with ethylene glycol chitin as the substrate, and were stable over a wide pH range (3.0-9.0). The optimum temperature was 60 degrees C and the enzymes were stable up to 50 degrees C. The chitinases exhibited wide substrate specificities for chitin-related compounds.