Turbidimetric bioassays: A solution to antimicrobial activity detection in asymptomatic bacteriuria isolates against uropathogenic Escherichia coli

Traditional bacteriocin screening methods often face limitations due to diffusion-related challenges in agar matrices, which can prevent the peptides from reaching their target organism. Turbidimetric techniques offer a solution to these issues, eliminating diffusion-related problems and providing an initial quantification of bacteriocin efficacy in producer organisms. This study involved screening the cell-free supernatant (CFS) from eight uncharacterized asymptomatic bacteriuria (ABU) isolates and Escherichia coli 83972 for antimicrobial activity against clinical uropathogenic E. coli (UPEC) strains using turbidimetric growth methods. ABU isolates exhibiting activity against five or more UPEC strains were further characterized (PUTS 37, PUTS 58, PUTS 59, S-07-4, and SK-106-1). The inhibition of the CFS by proteinase K suggested that the antimicrobial activity was proteinaceous in nature, potentially bacteriocins. The activity of E. coli PUTS 58 and SK-106-1 was enhanced in an artificial urine medium, with both inhibiting all eight UPECs. A putative microcin H47 operon was identified in E. coli SK-106-1, along with a previously identified microcin V and colicin E7 in E. coli PUTS 37 and PUTS 58, respectively. These findings indicate that ABU bacteriocin-producers could serve as viable prophylactics and therapeutics in the face of increasing antibiotic resistance among uropathogens.

Exploring definitions of daily enteric methane emission phenotypes for genetic evaluations using a population of indoor-fed multi-breed growing cattle with feed intake data

Genetic selection has been identified as a promising approach for reducing enteric methane (CH4) emissions; a prerequisite for genetic evaluations; however, these are estimates of the necessary genetic parameters based on a population representative of where the genetic evaluations will be used. The objective of this study was, therefore, to derive genetic parameters for a series of definitions of CH4, carbon dioxide (CO2), and dry matter intake (DMI) as well as genetic correlations between CH4, CO2, and DMI in a bid to address the paucity of studies involving methane emissions measured in beef cattle using GreenFeed systems. Lastly, estimated breeding values (EBV) were generated for nine alternative definitions of CH4 using the derived genetic parameters; the EBV were validated against both phenotypic performance (adjusted for non-genetic effects) and the Legarra and Reverter method comparing EBV generated for a subset of the dataset compared to EBV generated from the entire dataset. Individual animal CH4 and CO2 records were available from a population of 1,508 multi-breed growing beef cattle using 10 GreenFeed Emission Monitoring systems. Nine trait definitions for CH4 and CO2 were derived: individual spot measures, the average of all spot measures within a 3-h, 6-h, 12-h, 1-d, 5-d, 10-d, and 15-d period and the average of all spot measures across the full test period (20 to 114 d on test). Heritability estimates from 1,155 animals, for CH4, increased as the length of the averaging period increased and ranged from 0.09 ± 0.03 for the individual spot measures trait to 0.43 ± 0.11 for the full test average trait; a similar trend existed for CO2 with the estimated heritability ranging from 0.17 ± 0.04 to 0.50 ± 0.11. Enteric CH4 was moderately to strongly genetically correlated with DMI with a genetic correlation of 0.72 ± 0.02 between the spot measures of CH4 and a 1-d average DMI. Correlations, adjusted for heritability, between the adjusted phenotype and (parental average) EBV ranged from 0.56 to 1.14 across CH4 definitions and the slope between the adjusted phenotype and EBV ranged from 0.92 to 1.16 (expectation = 1). Validation results from the Legarra and Reverter regression method revealed a level bias of between -0.81 and -0.45, a dispersion bias of between 0.93 and 1.17, and ratio accuracy (ratio of the partial evaluation accuracies on whole evaluation accuracies) from 0.28 to 0.38. While EBV validation results yielded no consensus, CH4 is a moderately heritable trait, and selection for reduced CH4 is achievable.

The association between calf birth weight and the post-calving performance of its dairy dam in the absence of dystocia

The objective of the study was to quantify the association between the birth weight of a calf and subsequent performance of its dairy dam in the absence of any recorded calving assistance. A total of 11,592 lactation records from 4,549 spring-calving dairy cows were used. The association between a series of quantitative cow performance metrics (dependent variable) and calf birth weight (independent variable) was determined using linear mixed models; logistic regression was used where the dependent variable was binary. Nuisance factors in the models were calf sex, heterosis coefficient of both the cow and calf, dry period length immediately before the birth of the calf, cow age at calving relative to the median cow age per parity, breed proportion of the cow, cow live-weight between 100 and 200 d of lactation relative to the mean cow weight per parity, and contemporary group. Calf birth weight was included in the model as either a continuous or a categorical variable. Primiparous and multiparous cows were analyzed separately. Mean (SD) calf birth weight was 36.2 (6.8) kg. In primiparous cows, calf birth weight was associated with milk yield in the first 60 d of lactation, calving to first service interval, calving body weight (BW), and both nadir BW and body condition score (BCS). In multiparous cows, calf birth weight was associated with total milk, fat and protein yield in the first 60 and 305 d of lactation, peak milk yield, total milk solids, both calving and nadir BW, and BCS loss from calving to nadir. Relative to primiparous cows that gave birth to calves that were 34 - 37 kg (i.e., population mean), their contemporaries who gave birth to calves that were 15 - 29 kg produced 9.82 kg more milk in the first 60 d of lactation, had a 2-d shorter interval to first service, and were 8.08 kg and 5.51 kg lighter at calving and nadir BW, respectively; the former was also 0.05 units lower BCS (scale 1 [thin] to 5[fat]) at nadir. Relative to multiparous cows that gave birth to calves that were 34 - 37 kg birth weight, multiparous cows that gave birth to calves that were 15 - 29 kg yielded 59.63 kg, 2.44 kg and 1.76 kg less milk, fat and protein, respectively, in the first 60 d of lactation, produced 17.69 kg less milk solids throughout the 305-d lactation, and were also 10.49 kg lighter at nadir and lost 0.01 units more BCS to nadir. In a separate series of analyses, sire breed was added to the model as a fixed effect with and without calf birth weight. When calf birth weight was not adjusted for, 60-d milk yield for multiparous cows who gave birth to calves sired by a traditional beef breed (i.e., Angus, Hereford) produced 59.63 kg more than multiparous cows who gave birth to calves sired by a Holstein-Friesian. Hence, calf birth weight is associated with some subsequent dam performance measures albeit, where associations do exit, the effect is biologically small.

Screening and Application of Novel Homofermentative Lactic Acid Bacteria Results in Low-FODMAP Whole-Wheat Bread

FODMAPs are fermentable oligo-, di-, monosaccharides, and polyols. The application of homofermentative lactic acid bacteria (LAB) has been investigated as a promising approach for producing low-FODMAP whole-wheat bread. The low-FODMAP diet is recommended to treat irritable bowel syndrome (IBS). Wheat flour is staple to many diets and is a significant source of fructans, which are considered FODMAPs. The reduction of fructans via sourdough fermentation, generally associated with heterofermentative lactic acid bacteria (LAB), often leads to the accumulation of other FODMAPs. A collection of 244 wild-type LAB strains was isolated from different environments and their specific FODMAP utilisation profiles established. Three homofermentative strains were selected for production of whole-wheat sourdough bread. These were Lactiplantibacillus plantarum FST1.7 (FST1.7), Lacticaseibacillus paracasei R3 (R3), and Pediococcus pentosaceus RYE106 (RYE106). Carbohydrate levels in flour, sourdoughs (before and after 48 h fermentation), and resulting breads were analysed via HPAEC-PAD and compared with whole-wheat bread leavened with baker’s yeast. While strain R3 was the most efficient in FODMAP reduction, breads produced with all three test strains had FODMAP content below cut-off levels that would trigger IBS symptoms. Results of this study highlighted the potential of homofermentative LAB in producing low-FODMAP whole-wheat bread.

Phenotypic relationship and repeatability of methane emissions and performance traits in beef cattle using a GreenFeed system

Rumen methanogenesis results in the loss of 6% to 10% of gross energy intake in cattle and globally is the single most significant source of anthropogenic methane (CH4) emissions. The purpose of this study was to analyze greenhouse gas traits recorded in a commercial feedlot unit to gain an understanding into the relationships between greenhouse gas traits and production traits. Methane and carbon dioxide (CO2) data recorded via multiple GreenFeed Emission Monitoring (GEM), systems as well as feed intake, live weight, ultrasound scanning data, and slaughter data were available on 1,099 animals destined for beef production, of which 648 were steers, 361 were heifers, and 90 were bulls. Phenotypic relationships between GEM emission measurements with feed intake, weight traits, muscle ultrasound data, and carcass traits were estimated. Utilization of GEM systems, daily patterns of methane output, and repeatability of GEM system measurements across averaging periods were also assessed. Methane concentrations varied with visit number, duration, and time of day of visit to the GEM system. Mean CH4 and CO2 varied between sex, with mean CH4 of 256.1 g/day ± 64.23 for steers, 234.7 g/day ± 59.46 for heifers, and 156.9 g/day ± 55.98 for young bulls. A 10-d average period of GEM system measurements were required for steers and heifers to achieve a minimum repeatability of 0.60; however, higher levels of repeatability were observed in animals that attended the GEM system more frequently. In contrast, CO2 emissions reached repeatability estimates >0.6 for steers and heifers in all averaging periods greater than 2-d, suggesting that cattle have a moderately consistent CO2 emission pattern across time periods. Animals with heavier bodyweights were observed to have higher levels of CH4 (correlation = 0.30) and CO2 production (correlation = 0.61), and when assessing direct methane, higher levels of dry matter intake were associated with higher methane output (correlation = 0.31). Results suggest that reducing CH4 can have a negative impact on growth and body composition of cattle. Methane ratio traits, such as methane yield and intensity were also evaluated, and while easy to understand and compare across populations, ratio traits are undesirable in animal breeding, due to the unpredictable level of response. Methane adjusted for dry matter intake and liveweight (Residual CH4) should be considered as an alternative emission trait when selecting for reduced emissions within breeding goals.

Re-assessing the importance of linear type traits in predicting genetic merit for survival in an aging Holstein-Friesian dairy cow population

The cumulative improvement achieved in the genetic merit for reproductive performance in dairy populations will likely improve dairy cow longevity; therefore, it is time to reassess whether linear type traits are still suitable predictors of survival in an aging dairy cow population. The objective of the present study was therefore to estimate the genetic correlations between linear type traits and survival from one parity to the next and, in doing so, evaluate if those genetic correlations change with advancing parity. After edits, 152,894 lactation survival records (first to ninth parity) were available from 52,447 Holstein-Friesian cows, along with linear type trait records from 52,121 Holstein-Friesian cows. A series of bivariate random regression models were used to estimate the genetic covariances between survival in different parities and each linear type trait. Heritability estimates for survival per parity ranged from 0.02 (SE = 0.004; first parity) to 0.05 (SE = 0.01; ninth parity). Pairwise genetic correlations between survival among different parities varied from 0.42 (first and ninth parity) to 1.00 (eighth to ninth parity), with the strength of these genetic correlations being inversely related to the interval between the compared parities. The genetic correlations between survival and the individual linear type traits varied across parities for 9 of the 20 linear type traits examined, but the correlations with only 3 of these linear type traits strengthened as the cows aged; these 3 traits were rear udder height, teat length, and udder depth. Given that linear type traits are frequently scored in first parity and are genetically correlated with survival in older parities, they may be suitable early predictors of survival, especially for later parity cows. Additionally, the direction of the genetic correlations between survival and rear udder height, teat length, and udder depth did not change between parities; hence, selection for survival in older parities using these linear type traits should not hinder genetic improvement for survival in younger parities.

Detection of Genomic Imprinting for Carcass Traits in Cattle Using Imputed High-Density Genotype Data

Genomic imprinting is an epigenetic phenomenon defined as the silencing of an allele, at least partially, at a given locus based on the sex of the transmitting parent. The objective of the present study was to detect the presence of SNP-phenotype imprinting associations for carcass weight (CW), carcass conformation (CC) and carcass fat (CF) in cattle. The data used comprised carcass data, along with imputed, high-density genotype data on 618,837 single nucleotide polymorphisms (SNPs) from 23,687 cattle; all animal genotypes were phased with respect to parent of origin. Based on the phased genotypes and a series of single-locus linear models, 24, 339, and 316 SNPs demonstrated imprinting associations with CW, CC, and CF, respectively. Regardless of the trait in question, no known imprinted gene was located within 0.5 Mb of the SNPs demonstrating imprinting associations in the present study. Since all imprinting associations detected herein were at novel loci, further investigation of these regions may be warranted. Nonetheless, knowledge of these associations might be useful for improving the accuracy of genomic evaluations for these traits, as well as mate allocations systems to exploit the effects of genomic imprinting.

The Association Between Genomic Heterozygosity and Carcass Merit in Cattle

The objective of the present study was to quantify the association between both pedigree and genome-based measures of global heterozygosity and carcass traits, and to identify single nucleotide polymorphisms (SNPs) exhibiting non-additive associations with these traits. The carcass traits of interest were carcass weight (CW), carcass conformation (CC) and carcass fat (CF). To define the genome-based measures of heterozygosity, and to quantify the non-additive associations between SNPs and the carcass traits, imputed, high-density genotype data, comprising of 619,158 SNPs, from 27,213 cattle were used. The correlations between the pedigree-based heterosis coefficient and the three defined genomic measures of heterozygosity ranged from 0.18 to 0.76. The associations between the different measures of heterozygosity and the carcass traits were biologically small, with positive associations for CW and CC, and negative associations for CF. Furthermore, even after accounting for the pedigree-based heterosis coefficient of an animal, part of the remaining variability in some of the carcass traits could be captured by a genomic heterozygosity measure. This signifies that the inclusion of both a heterosis coefficient based on pedigree information and a genome-based measure of heterozygosity could be beneficial to limiting bias in predicting additive genetic merit. Finally, one SNP located on Bos taurus (BTA) chromosome number 5 demonstrated a non-additive association with CW. Furthermore, 182 SNPs (180 SNPs on BTA 2 and two SNPs on BTA 21) demonstrated a non-additive association with CC, while 231 SNPs located on BTA 2, 5, 11, 13, 14, 18, 19 and 21 demonstrated a non-additive association with CF. Results demonstrate that heterozygosity both at a global level and at the level of individual loci contribute little to the variability in carcass merit.

Are subjectively scored linear type traits suitable predictors of the genetic merit for feed intake in grazing Holstein-Friesian dairy cows?

Measuring dry matter intake (DMI) in grazing dairy cows using currently available techniques is invasive, time consuming, and expensive. An alternative to directly measuring DMI for use in genetic evaluations is to identify a set of readily available animal features that can be used in a multitrait genetic evaluation for DMI. The objectives of the present study were thus to estimate the genetic correlations between readily available body-related linear type traits and DMI in grazing lactating Holstein-Friesian cows, but importantly also estimate the partial genetic correlations between these linear traits and DMI, after adjusting for differences in genetic merit for body weight. Also of interest was whether the predictive ability derived from the estimated genetic correlations materialized upon validation. After edits, a total of 8,055 test-day records of DMI, body weight, and milk yield from 1,331 Holstein-Friesian cows were available, as were chest width, body depth, and stature from 47,141 first lactation Holstein-Friesian cows. In addition to considering the routinely recorded linear type traits individually, novel composite traits were defined as the product of the linear type traits as an approximation of rumen volume. All linear type traits were moderately heritable, with heritability estimates ranging from 0.27 (standard error = 0.14) to 0.49 (standard error = 0.15); furthermore, all linear type traits were genetically correlated (0.29 to 0.63, standard error 0.14 to 0.12) with DMI. The genetic correlations between the individual linear type traits and DMI, when adjusted for genetic differences in body weight, varied from -0.51 (stature) to 0.48 (chest width). These genetic correlations between DMI and linear type traits suggest linear type traits may be useful predictors of DMI, even when body weight information is available. Nonetheless, estimated genetic merit of DMI derived from a multitrait genetic evaluation of linear type traits did not correlate strongly with actual DMI in a set of validation animals; the benefit was even less if body weight data were also available.

Phenotypic and genetic associations between feeding behavior and carcass merit in crossbred growing cattle

In growing cattle, the phenotypic and genetic relationships between feeding behavior and both live animal ultrasound measures and subsequent carcass merit are generally poorly characterized. The objective of the current study was to quantify the phenotypic and genetic associations between a plethora of feeding behavior traits with both pre-slaughter ultrasound traits and post-slaughter carcass credentials in crossbred Bos taurus cattle. Carcass data were available on 3,146 young bulls, steers, and heifers, of which 2,795 and 2,445 also had records for pre-slaughter ultrasound muscle depth and intramuscular fat percentage, respectively; a total of 1,548 steers and heifers had information on all of the feeding behavior, ultrasound, and carcass traits. Young bulls were fed concentrates, while steers and heifers were fed a total mixed ration. Feeding behavior traits were defined based on individual feed events or meal events (i.e., individual feed events grouped into meals). Animal linear mixed models were used to estimate (co)variance components. Phenotypic correlations between feeding behavior and both ultrasound and carcass traits were generally weak and not different from zero, although there were phenotypic correlations of 0.40, 0.26, and 0.37 between carcass weight and feeding rate, energy intake per feed event, and energy intake per meal, respectively. Genetically, cattle that had heavier carcass weights, better carcass conformation, or a higher dressing percentage fed for a shorter time per day (genetic correlations [±SE] of -0.46 ± 0.12, -0.39 ± 0.11, and -0.50 ± 0.10, respectively). Genetic correlations of 0.43 ± 0.12 and 0.68 ± 0.13 were estimated between dressing difference (i.e., differential between live weight pre-slaughter and carcass weight) and energy intake per feed event and energy intake per meal, respectively. Neither intramuscular fat percentage measured on live animals nor carcass fat score (i.e., a measure of subcutaneous fat cover of the carcass) was genetically associated with any of the feeding behavior traits. The genetic associations between some feeding behavior traits and both ultrasound and carcass traits herein suggested that indirect responses in the feeding behavior of growing cattle from selection for improved carcass merit would be expected. Such changes in feeding behavior patterns in cattle may be reduced by measuring and including feeding behavior in a multiple-trait selection index alongside carcass traits.

Genetic variability in the feeding behavior of crossbred growing cattle and associations with performance and feed efficiency

The objectives of the present study were to estimate genetic parameters for several feeding behavior traits in growing cattle, as well as the genetic associations among and between feeding behavior and both performance and feed efficiency traits. An additional objective was to investigate the use of feeding behavior traits as predictors of genetic merit for feed intake. Feed intake and live-weight data on 6,088 growing cattle were used of which 4,672 had ultrasound data and 1,548 had feeding behavior data. Feeding behavior traits were defined based on individual feed events or meal events (where individual feed events were grouped into meals). Univariate and bivariate animal linear mixed models were used to estimate (co)variance components. Heritability estimates (± SE) for the feeding behavior traits ranged from 0.19 ± 0.08 for meals per day to 0.61 ± 0.10 for feeding time per day. The coefficient of genetic variation per trait varied from 5% for meals per day to 22% for the duration of each feed event. Genetically heavier cattle, those with a higher daily energy intake (MEI), or those that grew faster had a faster feeding rate, as well as a greater energy intake per feed event and per meal. Better daily feed efficiency (i.e., lower residual energy intake) was genetically associated with both a shorter feeding time per day and shorter meal time per day. In a validation population of 321 steers and heifers, the ability of estimated breeding values (EBV) for MEI to predict (adjusted) phenotypic MEI was demonstrated; EBVs for MEI were estimated using multi-trait models with different sets of predictor traits such as liveweight and/or feeding behaviors. The correlation (± SE) between phenotypic MEI and EBV for MEI marginally improved (P < 0.001) from 0.64 ± 0.03 to 0.68 ± 0.03 when feeding behavior phenotypes from the validation population were included in a genetic evaluation that already included phenotypic mid-test metabolic live-weight from the validation population. This is one of the largest studies demonstrating that significant exploitable genetic variation exists in the feeding behavior of young crossbred growing cattle; such feeding behavior traits are also genetically correlated with several performance and feed efficiency metrics. Nonetheless, there was only a marginal benefit to the inclusion of time-related feeding behavior phenotypes in a genetic evaluation for MEI to improve the precision of the EBVs for this trait.

PSVI-20 Extent of genetic variation in feeding behavior and genetic associations with performance and feed efficiency in crossbred growing cattle

To the best of our knowledge, the genetic variability in feeding behavior, as well as relationships with performance and feed efficiency, has not been investigated in a cattle population of greater than 1,500 animals. Our objective was to quantify the genetic parameters of several feeding behavior traits, and their genetic associations with both performance and feed efficiency traits, in crossbred growing cattle. Feed intake and live-weight data were available on 6,088 bulls, steers and heifers; of these, 4,672 cattle had backfat and muscle ultrasound data, and 1,548 steers and heifers had feeding behavior data. Genetic (co)variance parameters were estimated using animal linear mixed models; fixed effects included test group, heterosis, recombination loss, dam parity, age in months at the end of test, and the two-way interaction between age in months at the end of test and sex. Heritability was estimated to be 0.51 (0.097), 0.61 (0.100), 0.44 (0.093), 0.48 (0.094), and 0.47 (0.095) for feed events per day, feeding time per day, feeding rate, feed event duration, and energy intake per feed event, respectively. Coefficients of genetic variation ranged from 0.11 (feeding time per day) to 0.22 (feed event duration). Genetically heavier cattle with a higher energy intake per day, and faster growth rate, had a faster feeding rate and a greater energy intake per feed event. Genetic correlations between feeding behavior and feed efficiency were generally not different from zero, however, there was a genetic correlation of 0.36 (0.11) between feeding time per day and residual energy intake. Significant heritable and exploitable genetic variation exists in several feeding behavior traits in crossbred growing cattle which are also correlated with several performance traits. As some feeding behavior traits may be relatively less resource intensive to measure, they could be useful as predictor traits in beef cattle genetic evaluations.

Collapse

26 Are Subjectively Scored Linear Type Traits Suitable Predictors of Genetic Merit for Feed Intake in Grazing Holstein-friesian Dairy Cows?

Measuring dry matter intake (DMI) in grazing dairy cows using currently available techniques is invasive, time consuming, and expensive. An alternative to directly measuring DMI for use in genetic evaluations is to identify a set of readily available data sources that can be used in a multi-trait genetic evaluation with DMI. The objectives of the present study were to estimate the genetic correlations between readily available body-related linear type trait information and DMI in grazing, lactating Irish dairy cows and to estimate the partial genetic correlations between linear traits and DMI, after adjusting for differences in genetic merit for body weight. After edits, a total of 8,055 test-day records of DMI, body weight, and milk yield from 1,331 multiparous dairy cows were available, as were chest width, body depth, and stature scores for 47,141 first lactation dairy cows. In addition to considering the routinely recorded linear type traits individually, novel traits were defined as the product of two or three linear type traits as an approximation of rumen volume. The genetic variance of DMI, body weight, milk yield, and linear type traits were estimated using univariate animal linear mixed models. Sire linear mixed models were used to calculate genetic and phenotypic covariances. All linear type traits were moderately heritable (0.27 to 0.49) and genetically correlated (0.29 to 0.63) with DMI. The genetic correlations between the individual linear type traits and DMI, when the latter was adjusted for differences in the genetic merit for body weight, varied from 0.00 to 0.39. If the (partial) genetic correlations were validated with genetic evaluations, routinely available linear type trait records and live weight data could facilitate the selection of DMI in dairy cows, removing the need to capture large amounts of cost prohibitive feed intake phenotypes.

Contribution of herd characteristics to best linear unbiased estimates of slaughter traits in beef cattle

Genetic evaluations separate phenotypes into their contributing additive genetic effects and non-(additive) genetic effects, with the former termed best linear unbiased predictions, and the latter termed best linear unbiased estimates (BLUEs). For the purpose of the present study, genetic evaluations, along with phenotypic data from 4 137 376 animals, were used to generate herd, year of slaughter and sex contemporary group BLUEs for various slaughter-related traits. These slaughter traits included carcass weight (CW), carcass conformation (CC) and carcass fat (CF). For the 4 665 herds that were consistently slaughtering ≥10 animals/year between the years 2014 and 2018, inclusive, all relevant contemporary group BLUEs were collapsed into a single herd-year value; results herein relate to these herds. The within-year herd-year BLUE correlations between CW and CC, between CW and CF, and between CC and CF were 0.51, 0.10 and -0.04, respectively. The repeatability across years of the herd-year BLUEs for CW, CC and CF was 0.66, 0.59 and 0.50, respectively. Furthermore, when the herds were stratified, within year, on the percentile rank of their herd-year BLUEs, herds had the greatest probability of remaining in the same BLUE stratum from one year to the next. In addition, results from the present study determined that various herd characteristics are associated with differences in the herd BLUEs. Results from the present study could be used to advise beef producers on the most promising strategy to improve the carcass merit of their animals.

Commercial beef farms excelling in terminal and maternal genetic merit generate more gross profit

Validation of beef total merit breeding indexes for improving performance and profitability has previously been undertaken at the individual animal level; however, no herd-level validation of beef genetic merit and profit has been previously investigated. The objective of the present study was to quantify the relationship between herd profitability and both herd-average terminal and maternal genetic merit across 1,311 commercial Irish beef herds. Herd-level physical and financial performance data were available from a financial benchmarking tool used by Irish farmers and their extension advisors. Animal genetic merit data originated from the Irish Cattle Breeding Federation who undertake the national beef and dairy genetic evaluations. Herd-average genetic merit variables included the terminal index of young animals, the maternal index of dams, and the terminal index of service sires. The herds represented three production systems: 1) cow-calf to beef, 2) cow-calf to weanling/yearling, and 3) weanling/yearling to beef. Associations between herd financial performance metrics and herd average genetic merit variables were quantified using a series of linear mixed models with year, production system, herd size, stocking rate, concentrate input, and the two-way interactions between production system and herd size, stocking rate, and concentrate input included as nuisance factors. Herd nested within the county of Ireland (n = 26) was included as a repeated effect. Herds with young cattle excelling in terminal index enjoyed greater gross and net profit per hectare (ha), per livestock unit (LU), and per kg net live-weight output. The change in gross profit per LU per unit change in the terminal index of young animals was €1.41 (SE = 0.23), while the respective regression coefficient for net profit per LU was €1.37 (SE = 0.30); the standard deviation of the terminal index is €37. Herd-average dam maternal index and sire terminal index were both independently positively associated with gross profit per ha and gross profit per LU. Each one unit increase in dam maternal index (standard deviation of €38) was associated with a €1.40 (SE = 0.48) and €0.76 (SE = 0.29) greater gross profit per ha and per LU, respectively. Results from the present study at the herd-level concur with previous validation studies at the individual animal level thus instilling further confidence among stakeholders as to the expected improvement in herd profitability with improving genetic merit.

Herd solutions from genetic evaluations can be used as a tool to rescale the expected expression of genetic potential in cattle

The objective of this study was to determine whether response to selection for carcass weight (CW), conformation (CC) and fat (CF), and the association between heterosis and carcass performance varied by herd environment in cattle. Following edits, carcass information was available for 4,616,761 cattle, of which the majority were some crossbred combination of the following breeds: Angus, Aubrac, Belgian Blue, Blonde d'Aquitaine, Charolais, Hereford, Holstein-Friesian, Jersey, Limousin, Saler, Shorthorn and Simmental. Herd environment was defined separately for each carcass trait using herd solutions outputted from carcass trait genetic evaluations. A total of 3,859 herds were stratified, for each trait, into one of five strata based on their corresponding percentile herd solution rank, with the response to selection and the effect of heterosis then estimated within each stratum. The response in CW and CC from selection on the respective estimated breeding values (EBV) increased between the lowest (0.71 kg and 0.89 CC score increase per unit increase in the respective EBV) and highest (0.99 kg and 1.25 CC score increase per unit increase in the respective EBV) corresponding herd stratum. The response in CF from selection on CF EBV, however, reduced between the lowest and highest CF herd stratum (respective increases of 0.93 and 0.83 CF scores per unit increase in CF EBV). In addition, the effect of a unit increase in heterosis coefficient on CW, CC and CF also varied by herd stratum. Furthermore, results (i.e. the area under relative operating characteristic curves) from the present study demonstrated that the response to selection and heterosis effects estimated for the different herd stratum can be used, along with EBVs and the herd solutions themselves, to improve the accuracy of phenotypic predictions. Results from the present study could help producers to make more informed breeding decisions that are bespoke to their herd.

The Changing Role of Nurses in Making Ethical Decisions

In past decades, biomedical technology has created such advances that many health care professionals and consumers are overwhelmed by the apparently unlimited choices in treatment decisions. Problems in human reproduction, preservation of life, research on human subjects, and allocation of scarce resources are just a few of the categories of concerns that we now face. These dilemmas are complex both from conceptual and ethical perspectives. Thus, it becomes more and more difficult to define such important concepts as “human life” or ‘extraordinary treatment,” and to apply these concepts to clinical situations. It has become almost impossible to objectively interpret and apply ethical principles which should guide actions of health care providers.

Large variability in feeding behavior among crossbred growing cattle

The purpose of this study was to define an extensive suite of feeding behavior traits in growing crossbred cattle and to investigate their phenotypic inter-relationships as well as relationships with other performance and efficiency traits. Time-series feeding behavior data, as well as feed intake and liveweight records, were available for 624 growing crossbred cattle, of which 445 were steers and 179 were heifers. Feeding behavior repeatability estimates were calculated using linear mixed models. Additionally, partial Spearman correlations were estimated among 14 feeding behavior traits, as well as between feeding behavior with both performance and feed efficiency traits, using residuals retained from linear mixed models. The marginal contribution of several feeding behavior traits to the variability in metabolizable energy intake (MEI) was also determined. Repeatability estimates of 0.57, 0.36, and 0.48 were calculated for the number of feed events per day, the total time spent feeding per day, and the feeding rate, respectively. Cattle that ate more frequently each day, ate at a faster rate and consumed less energy in each visit to the feed bunk. More efficient cattle fed less often per day and fed for a shorter duration per day; they also had a slower feeding rate and fed for longer in each visit to the feed bunk. Moreover, heavier cattle fed for a longer duration per day had a faster feeding rate, but fed less often per day; heavier animals also fed first in the pen after the fresh feed was offered. The number of feed events per day and feeding time per day together explained an additional 13.4 percentage points of the variability in MEI above that already explained by all of growth rate, liveweight, and backfat depth. The results from the present study suggest that several repeatable time-series-related feeding behavior traits, that are less resource intensive to measure, may have a role as useful predictor traits of important but relatively difficult to record traits, such as feed intake and efficiency.

The achievement of a given carcass specification is under moderate genetic control in cattle

The objective of the present study was to estimate the genetic parameters associated with the achievement of desirable weight, conformation, and fat specifications, represented by a series of binary traits. The desired specifications were those stipulated by Irish beef processors, in accordance with the EUROP carcass grading system, and were represented by a carcass weight between 270 and 380 kg, a fat score between 2+ and 4= (between 6 and 11 on a 15-point scale), and a conformation score of O= or better (≥5 on a 15-point scale). Using data from 58,868 beef carcasses, variance components were estimated using linear mixed models for these binary traits, as well as their underlying continuous measures. Heritability estimates for the continuous traits ranged from 0.63 to 0.73; heritability estimates for the binary traits ranged from 0.05 to 0.19. An additional trait was defined to reflect if all desired carcass specifications were met. All genetic correlations between this trait and the individual contributing binary traits were positive (0.38 to 0.87), while all genetic correlations between this trait and the continuous carcass measures were negative (-0.87 to -0.07). The genetic parameters estimated in the present study signify that potential exists to breed cattle that more consistently achieve desirable carcass metrics at harvest.

Genetic and nongenetic factors associated with lactation length in seasonal-calving, pasture-based dairy cows

Lactation yield estimates standardized to common lactation lengths of 270-d or 305-d equivalents are commonly used in management decision support tools and dairy cow genetic evaluations. The use of such measurements to quantify the (genetic) merit of individual cows fails to penalize cows that do not reach the standardized lactation length, or indeed reward cows that lactate for more than the standardized lactation length. The objective of the present study was to quantify the genetic and nongenetic factors associated with lactation length in seasonal-calving, pasture-based dairy cows. A total of 616,350 lactation length records from 285,598 Irish cows were used. Linear mixed models were used to quantify the associations between lactation length and calving month, parity, age at calving, previous dry period length, calving difficulty score, heterosis, recombination loss, breed, and herd size, as well as to estimate the genetic and residual variance components of lactation length. The median lactation length in the edited data set was 288 d, with 27% of cows achieving lactations of at least 305 d. Relative to cows calving in January, the lactations of cow calving in February, March, or April was, on average, 4.2, 12.7, and 21.9 d shorter, respectively. The lactation length of a first parity cow was, on average, 7.8, 8.6, and 8.4 d shorter than that of second, third, and fourth parity cows, respectively. Norwegian Red and Montbéliarde cows had, on average, a 4.7- and 1.6-d shorter lactation than Holstein-Friesian cows, respectively. The heritability estimate, coefficient of genetic variation, and repeatability estimate of lactation length were 0.02, 1.2%, and 0.04, respectively. Based on the genetic standard deviation for lactation length estimated in the present study (3.3 d), cows ranked in the top 20% for genetic merit for lactation length would be expected to have lactations 9.2 d longer than cows in the bottom 20%, demonstrating exploitable genetic variability. Given the vast array of genetic and nongenetic factors associated with lactation length, an approach which combines improved management practices and selective breeding may be an efficient and effective strategy to lengthen lactations.

Animal-level factors associated with the achievement of desirable specifications in Irish beef carcasses graded using the EUROP classification system

Beef carcasses in Europe are classified on measures of carcass weight, conformation, and fat cover. These measurements provide the basis for payment to producers, with financial penalties for carcasses that do not conform to desirable characteristics. The objective of the present study was to identify animal-level factors associated with the achievement of a desirable carcass weight, conformation score, fat score, and age at harvest, as stipulated by Irish beef processors in accordance with the EUROP carcass classification system. The stipulated specifications were a EUROP conformation score ≥O=, a carcass weight between 270 and 380 kg, a EUROP fat score between 2+ and 4=, and an age at harvest ≤ 30 mo. In the present study, 59% of cattle failed to achieve at least one of these desired specifications. The logit of the probability of achieving the desired specifications was estimated using multivariable logistic regression and carcass data from 4,717,989 cattle finished and harvested in Ireland between the years 2003 and 2017. In comparison to beef-origin carcasses and after accounting for breed differences, the likelihood of dairy-origin carcasses achieving the desired age, conformation, fat, and weight specifications was 0.97, 0.88, 1.14, and 1.05, respectively. In comparison to heifer carcasses, the odds ratio (OR) of bull and steer carcasses simultaneously achieving all of the desired specifications (i.e. the overall specification) was 0.35 and 0.95, respectively. Additionally, after accounting for breed differences, heifers from the dairy herd were half as likely as heifers from the beef herd to achieve the overall specification, whereas the odds of dairy-origin bulls (OR = 3.46) and steers (OR = 2.41) achieving the overall specification was greater than that of their respective beef-origin counterparts. Finally, cattle with a greater breed proportion of Angus were most likely to achieve the overall specification. Results from the present study could provide a deeper understanding as to why animals fail to achieve desirable carcass specifications and could be implemented into the management decisions made on farm to ensure that the supply of beef carcasses that achieve the desired metrics is maximized.

Feed and production efficiency of young crossbred beef cattle stratified on a terminal total merit index

Few studies have attempted to quantify the association between a terminal total merit index with phenotypic feed and production efficiency in beef cattle, particularly when feed efficiency is itself explicitly absent as a goal trait in the index. The objective of the present study was to quantify the differences in phenotypic performance for feed intake, feed efficiency, and carcass traits of crossbred bulls, steers, and heifers differing in a terminal total merit index. A validation population of 614 bulls, steers, and heifers that were evaluated for feed intake and efficiency in the same feedlot and subsequently slaughtered at the end of their test period was constructed. The Irish national genetic evaluations for a terminal index of calving performance, docility, feed intake, and carcass traits were undertaken with the phenotypic records of animals present in the validation population masked. The validation population animals were subsequently stratified into four groups, within sex, according to their terminal index value. Mixed models were used to quantify the association between terminal genetic merit and phenotypic performance; whether the associations differed by sex were also investigated. The regression coefficient of phenotypic feed intake, carcass weight, carcass conformation, or carcass fat on its respective estimated breeding values was 0.86 kg dry matter 0.91 kg, 1.01 units, and 1.29 units, respectively, which are close to the expectation of one. On average, cattle in the very high terminal index stratum had a 0.63 kg DM/d lower feed intake, a 25.05 kg heavier carcass, a 1.82 unit better carcass conformation (scale 1 to 15), and a 1.24 unit less carcass fat score (scale 1 to 15), relative to cattle in the very low terminal index stratum. Cattle of superior total genetic merit were also more feed efficient (i.e., had a lower energy conversion ratio, lower residual feed intake, and greater residual gain), had a greater proportion of their live-weight as carcass weight (i.e., better dressing percentage) and were slaughtered at a younger age relative to their inferior total genetic merit counterparts. This study provides validation of an all-encompassing total merit index and demonstrates the benefits of selection on a total merit index for feed and production efficiency, which should impart confidence among stakeholders in the contribution of genetic selection to simultaneous improvements in individual animal performance and efficiency.

An educational intervention for advance directives

In spite of the passage of the Patient Self-Determination Act in 1991, research indicates that providing information alone has not brought about a significant increase in the completion rates of advance directive (AD) documents. The purpose of this pilot study was to design, implement, and evaluate an interactive multimedia CD-ROM educational program on AD. Study subjects consisted of 31 volunteer elderly men and women in a senior citizens center. An interactive multimedia CD-ROM program was developed in phase I of the study. Subjects were administered on-line pretests and posttests. The effectiveness of the CD-ROM intervention was measured by AD attitude and knowledge changes. A program satisfaction scale was used, and an observer rated the subjects' use of the computer program. Subjects had a statistically significant change in posttest knowledge scores and a high degree of satisfaction and ease in using the computer program. The use of an interactive multimedia CD-ROM program with a touch-sensitive monitor to operate a computer-based AD program for senior citizens shows future promise.

Clinical judgment: an integrated model

Literature on clinical judgment is discussed as a background for proposing an integrated model of diagnostic-therapeutic and ethical reasoning. Information processing and nursing process components related to problem identification and problem solving serve as a framework for the integration of the two domains of clinical reasoning. Discussion focuses on the integration of process components, identification of areas of research, and the use of the model in education and practice.

Dose-related cutaneous toxicities with etoposide

BACKGROUND

Cutaneous toxicities are seen frequently in association with administration of high doses, but not standard doses, of agents. With the increasing use of etoposide in dose-intensive regimens, cutaneous toxicities are appearing with increasing frequency.

METHODS

A retrospective analysis of 145 patients treated with various doses of etoposide was conducted.

RESULTS

This analysis revealed a statistically significant increase in the frequency of these toxicities at doses of 2400 mg/m2 and 4200 mg/m2, compared with doses of 1800 mg/m2. Intense, painful palmar erythema accompanied by bullae formation and desquamation occurred at the 4200 mg/m2 dose. Symptoms were controlled by a short course of corticosteroids.

CONCLUSION

Although they are not dose limiting, substantial dose-related skin toxicities can be an important side effect of high-dose etoposide therapy.

Encephalopathy and seizures induced by intravesical alum irrigations

Hemorrhagic cystitis is a significant toxic effect of cyclophosphamide therapy. Continuous bladder irrigation of a 1% alum solution is a simple and generally safe method of chemical cautery to treat the bleeding urothelium. We report four cases of encephalopathy coincident with elevated aluminum levels as well as one patient who developed seizures while receiving continuous bladder irrigations with alum. All patients had significant renal insufficiency. We recommend the cautious use of alum irrigation in patients with renal impairment and monitoring of serum aluminum levels to prevent excessive accumulation and toxicity.

Generalized seizures secondary to high-dose busulfan therapy

Two patients without prior histories of neurologic disorders experienced generalized seizures while receiving high-dose busulfan (total dose 16 mg/kg) as part of a preparative regimen for allogeneic bone marrow transplantation. A review of the literature revealed 14 similar occurrences. Maintenance of therapeutic blood concentrations of phenytoin in subsequent patients at our institution has resulted in no further patients experiencing generalized seizures. Prophylactic anticonvulsant therapy should be considered in patients receiving high doses of busulfan.

The small pin circular fixator for distal tibial pilon fractures with soft tissue compromise

A Monticelli-Spinelli small pin circular external fixator was used in combination with closed reduction or a limited open reduction internal fixation in five cases in an attempt to salvage a satisfactory result in distal tibia pilon fractures when associated soft tissue compromise prevented standard fixation with plates and screws. The small pin fixator enhances the ability to perform a closed reduction through a technique that uses distraction with pins in the tibia and calcaneus, combined with correction of angulation by tensioning wires with a stop nut. Small pin stabilization of these comminuted fractures allows early patient mobilization. The small diameter pins support the soft cancellous bone fragments. This technique attempts to combine the benefits of traction, external fixation, and limited internal fixation. We recommend this technique as a salvage procedure when plates and screws are contraindicated because of poor bone and soft tissue conditions.

The small pin circular fixator for proximal tibial fractures with soft tissue compromise

We used a Monticelli-Spinelli small pin circular external fixator in five cases, in combination with closed reduction or limited open reduction internal fixation, to salvage a satisfactory result in juxtaarticular, intraarticular fractures of the proximal tibia, when associated soft tissue compromise prevented standard fixation with plates and screws. The small pin circular fixator allows juxtaarticular placement of the small pins, enhancing stabilization of the comminuted fractures, allowing early range of motion of the joint and early patient mobilization. The small diameter pins support the soft cancellous bone fragments. This technique attempts to combine the benefits of traction, external fixation, and limited internal fixation. We recommend this method as a salvage procedure when plates and screws are contraindicated because of poor bone and soft tissue conditions.

Stabilization of sacroiliac joint disruption with threaded compression rods

Eleven cases of sacroiliac dislocation and/or fracture (Malgaigne pattern) were successfully reduced and stabilized using two threaded compression rods. The mean follow-up period was 26.1 months (range, seven to 45 months). None of the implants failed and there was no subsequent displacement. Two patients had mild residual lower back pain, and one was treated with implant removal without subsequent relief of pain. One patient, in whom the operation was done 110 days after dislocation, had extension of an incomplete preoperative peroneal nerve palsy. After anterior pelvic ring stabilization has been performed, two threaded 3/16-inch diameter rods are driven from the normal posterior iliac wing superficial to the sacrum and through the reduced opposite iliac wing. Compression is obtained with washers and nuts. This procedure can be performed safely and effectively, providing stable fixation and allowing early mobilization to help lessen or prevent the complications associated with prolonged bed rest.

Complex femur fractures: treatment with the Wagner external fixation device or the Grosse-Kempf interlocking nail

One hundred complex femur fractures were treated with the Grosse-Kempf interlocking nail and 35 were treated with the Wagner external fixation device. Retrospectively, we analyzed the results in the two groups to determine specific indications for the future use of these nails. The Grosse-Kempf nail, although a technically demanding procedure, achieved excellent overall end results in comminuted closed fractures, and in Type I, Type II, and some Type III open fractures after appropriate wound care. We found that the Wagner apparatus was a simple, easy device for obtaining initial fracture stabilization in contaminated Type III-B and Type III-C open fractures. It does, however, require substantial postoperative care; four cases required secondary intramedullary fixation. We found a high infection rate with secondary reamed intramedullary nailing after initial stabilization with the external fixator.

Management of the upper extremity in traumatic tetraplegia

The management of the upper extremity in traumatic tetraplegia is complex and extremely important for the rehabilitation of the patient. The evolution of present management is reviewed. The evaluation and classification of the tetraplegic patient is discussed with general recommendations for treatment.

Cost of implementing Veterans Administration directives for handling antineoplastic agents

Directives issued by the Veterans Administration central office for the safe handling of antineoplastic agents are described, and the costs associated with implementing these directives are reported. The directives are similar to other recent guidelines, including those issued by the Occupational Safety and Health Administration. Inventory records for a 12-month period were analyzed to determine the total number of doses of antineoplastic agents prepared and the total number of treatments administered at a 704-bed VA facility with a comprehensive cancer treatment program. For 3112 prepared doses and 2345 treatment regimens, the total cost of implementing the directives was $57,115, including $6,670 for the purchase of a vertical laminar-airflow hood. The VA central office directives represent reasonable guidelines for controlling the potential hazards of handling antineoplastic agents. Considerable expense is associated with implementing the directives; the degree of added expense will vary based on the particular hospital setting, the number of doses of antineoplastic agents administered, and the nature of the oncology services already in place.

Jejunal rupture in a football player

An 18-year-old football player sustained a jejunal rupture when he was struck in the abdomen during a high school football game. Such abdominal injuries in contact sports are rare; however, it is imperative that team physicians, trainers, and coaches be aware of such injuries.

Dural puncture using the lateral approach for chemonucleolysis

The lateral approach for chemonucleolysis was developed to avoid dural puncture, which occurs with midline and posterolateral approaches. It is important to check for dural punctures during the procedure. If the dura is penetrated, a potential pathway is created for chymopapain to enter the subarachnoid space. Large doses of intrathecal chymopapain are highly toxic and small doses show a variable response. Because of the potential disastrous complications associated with intrathecal chymopapain, the chymopapain injection is contraindicated in the presence of a dural leak.