Evaluation of Bilateral Maxillary Sinus Ectopic Teeth Using CT and Cinematic Rendering-A Case Report

Ectopic teeth in the maxillary sinus are a rare finding and pose a diagnostic challenge due to their unusual location and clinical management. A 28-year-old man presented with complaints of discomfort and pressure in the maxillary sinus region. A CT scan and cinematic rendering revealed the presence of ectopic teeth in the maxillary sinus bilaterally. The use of cinematic rendering provided a more detailed and accurate visualization of the ectopic teeth and surrounding anatomical structures. A CT scan is the primary imaging modality used for the diagnosis and visualization of ectopic teeth in the maxillary sinus. In addition, the use of cinematic rendering can improve diagnostic accuracy and reduce the need for further imaging studies. The use of CT and cinematic rendering can help in the diagnosis and visualization of ectopic teeth in the maxillary sinus, aiding in the planning of surgical interventions.

A customized anthropomorphic 3D-printed phantom to reproducibility assessment in computed tomography: an oncological case study

Introduction

Studies on computed tomography (CT) reproducibility at different acquisition parameters have to take into account radiation dose administered and related ethical issues. 3D-printed phantoms provide the possibility to investigate these features deeply and to foster CT research, also taking advantage by outperforming new generation scanners. The aim of this study is to propose a new anthropomorphic 3D-printed phantom for chest lesions, tailored on a real patient CT scan, to investigate the variability of volume and Hounsfield Unit (HU) measurements at different CT acquisition parameters.

Methods

The chest CT of a 75-year-old patient with a paramediastinal lung lesion was segmented based on an eight-compartment approach related to HU ranges (air lung, lung interstitium, fat, muscle, vascular, skin, bone, and lesion). From each mask produced, the 3D.stl model was exported and linked to a different printing infill value, based on a preliminary test and HU ratios derived from the patient scan. Fused deposition modeling (FDM) technology printing was chosen with filament materials in polylactic acid (PLA). Phantom was acquired at 50 mAs and three different tube voltages of 80, 100, and 120 kVp on two different scanners, namely, Siemens Somatom Force (Siemens Healthineers, Erlangen, Germany; same setting of real patient for 80 kVp acquisition) and GE 750 HD CT (GE Healthcare, Chicago, IL). The same segmentation workflow was then applied on each phantom acquisition after coregistration pipeline, and Dice Similarity Coefficient (DSC) and HU averages were extracted and compared for each compartment.

Results

DSC comparison among real patient versus phantom scans at different kVp, and on both CT scanners, demonstrated a good overlap of different compartments and lesion vascularization with a higher similarity for lung and lesion masks for each setting (about 0.9 and 0.8, respectively). Although mean HU was not comparable with real data, due to the PLA material, the proportion of intensity values for each compartment remains respected.

Discussion

The proposed approach demonstrated the reliability of 3D-printed technology for personalized approaches in CT research, opening to the application of the same workflow to other oncological fields.

Multimodality imaging of a cardiac paraganglioma: A case report

Cardiac paragangliomas (PGLs) are rare extra-adrenal tumors that arise from chromaffin cells of the sympathetic ganglia. PGLs are often diagnosed incidentally, in the absence of symptoms, or with symptoms related to cardiovascular dysfunction. Cardiac computed tomography (CCT) and cardiac magnetic resonance (CMR) can be used to accurately determine the lesion morphology and position as well as providing detailed tissue characterization. A multimodal imaging approach, not yet standardized, could be useful either in diagnosis and monitoring or in treatment planning. In the case reported here, CCT and CMR were performed to define lesion anatomy, and a reconstruction was generated using cinematic rendering (CR) to characterize the PGL angioarchitecture.

An innovative approach for the evaluation of prolonged disorders of consciousness using NF-L and GFAP biomarkers: a pivotal study

Behavioral assessments during the clinical evaluation in prolonged disorders of consciousness patients could be not sufficient for a correct diagnosis and prognostication. To this aim, we used an innovative approach, involving the ultra-sensitive determination of biological markers, correlating them with imaging parameters to investigate the prolonged disorders of consciousness (pDoC).We assessed the serum concentration of neurofilament light chain(NF-L) and glial fibrillary acidic protein (GFAP) in pDoC (n = 16), and healthy controls (HC, n = 6) as well as several clinical imaging parameters such as Fractional Anisotropy (FA), Whole Brain SUV, and White Matter Hyperintensities volumes (WMH) using PET-MRI acquisition. As for differential diagnosis task, only the imaging WMH volume was able to discriminate between vegetative state/unresponsive wakefulness syndrome (VS/UWS), and minimally conscious state (MCS) patients (p-value < 0.01), while all selected markers (both imaging and in vitro) were able to differentiate between pDoC patients and HC. At subject level, serum NF-L concentrations significantly differ according to clinical progression and consciousness recovery (p-value < 0.01), highlighting a potential play for the longitudinal management of these patients.

Evaluation of AI-Based Segmentation Tools for COVID-19 Lung Lesions on Conventional and Ultra-low Dose CT Scans

A reliable diagnosis and accurate monitoring are pivotal steps for treatment and prevention of COVID-19. Chest computed tomography (CT) has been considered a crucial diagnostic imaging technique for the injury assessment of the viral pneumonia. Furthermore, the automatization of the segmentation methods for lung alterations helps to speed up the diagnosis and lighten radiologists' workload. Considering the assiduous pathology monitoring, ultra-low dose (ULD) chest CT protocols have been implemented to drastically reduce the radiation burden. Unfortunately, the available AI technologies have not been trained on ULD-CT data and validated and their applicability deserves careful evaluation. Therefore, this work aims to compare the results of available AI tools (BCUnet, CORADS AI, NVIDIA CLARA Train SDK and CT Pneumonia Analysis) on a dataset of 73 CT examinations acquired both with conventional dose (CD) and ULD protocols. COVID-19 volume percentage, resulting from each tool, was statistically compared. This study demonstrated high comparability of the results on CD-CT and ULD-CT data among the four AI tools, with high correlation between the results obtained on both protocols (R > .68, P < .001, for all AI tools).

Rhinoplasty Pre-Surgery Models by Using Low-Dose Computed Tomography, Magnetic Resonance Imaging, and 3D Printing

Rhinoplasty and surgical reconstruction of cartilaginous structures still remain a great challenge today. This study aims to identify an imaging strategy in order to merge the information from CT scans and magnetic resonance imaging (MRI) acquisitions and build a 3D printed model true to the patient's anatomy, for better surgical planning. Using MRI, information can be obtained about the cartilage structures of which the nose is composed. Ten rhinoplasty candidate patients underwent both a low-dose protocol CT scan and a specific MRI for characterization of nasal structures. Bone and soft tissue segmentations were performed in CT, while cartilage segmentations were extrapolated from MRI and validated by both an expert radiologist and surgeon. Subsequently, a 3D model was produced in materials and colors reproducing the density of the three main structures (bone, soft tissue, and cartilage), useful for pre-surgical evaluation. This study has highlighted that the optimization of a CT and MR dedicated protocol has allowed to reduce the CT radiation dose up to 60% compared to standard acquisitions with the same machine, and MR acquisition time of about 20%. Patient-tailored 3D models and pre-surgical planning have reduced the mean operative time by 20 minutes.

Investigating Dual-Energy CT Post-Contrast Phases for Liver Iron Quantification: A Preliminary Study

Background and Purpose:

Quantification of hepatic virtual iron content (VIC) by using Multidetector Dual Energy Computed Tomography (DECT) has been recently investigated since this technique could offer a good compromise between accuracy and non-invasiveness for liver iron content quantification. The aim of our study is to investigate differences in VIC at different DECT time points (namely baseline and arterial, venous and tardive phases), identifying the most reliable and also exploring the underlying temporal trend of these values.

Materials and Methods:

Eleven patients who underwent DECT examination and were characterized by low liver fat content were included in this retrospective study. By using the Syngo.via Frontier–DE IronVNC tool, regions of interest (ROI) were placed on the VIC images at 3 hepatic levels, both in left and right liver lobes, at each DECT time point. Friedman’s test followed by Bonferroni-adjusted Wilcoxon signed-rank test for post-hoc analysis was performed to assess differences between DECT timepoints. Page’s L test was performed to test the temporal trend of VIC across the 4 examined timepoints.

Results:

For both liver lobes, Friedman’s test followed by Bonferroni-adjusted Wilcoxon signed-rank test revealed that VIC values differed significantly when extracted from ROIs placed at the 4 different timepoints. The Page’s L test for multiple comparison revealed a significant growing trend for VIC, from baseline acquisition to the fourth and last time point post-contrast agent injection.

Conclusions:

The extraction of hepatic VIC in healthy subjects was found to be significantly influenced by the DECT time point chosen for the extrapolation of the VIC values.

Whole Body Low Dose Computed Tomography Using Third-Generation Dual-Source Multidetector With Spectral Shaping: Protocol Optimization and Literature Review

For decades, the main imaging tool for multiple myeloma (MM) patient's management has been the conventional skeleton survey. In 2014 international myeloma working group defined the advantages of the whole-body low dose computed tomography (WBLDCT) as a gold standard, among imaging modalities, for bone disease assessment and subsequently implemented this technique in the MM diagnostic workflow. The aim of this study is to investigate, in a group of 30 patients with a new diagnosis of MM, the radiation dose (CT dose index, dose-length product, effective dose), the subjective image quality score and osseous/extra-osseous findings rate with a modified WBLDCT protocol. Spectral shaping and third-generation dual-source multidetector CT scanner was used for the assessment of osteolytic lesions due to MM, and the dose exposure was compared with the literature findings reported until 2020. Mean radiation dose parameters were reported as follows: CT dose index 0.3 ± 0.1 mGy, Dose-Length Product 52.0 ± 22.5 mGy*cm, effective dose 0.44 ± 0.19 mSv. Subjective image quality was good/excellent in all subjects. 11/30 patients showed osteolytic lesions, with a percentage of extra-osseous findings detected in 9/30 patients. Our data confirmed the advantages of WBLDCT in the diagnosis of patients with MM, reporting an effective dose for our protocol as the lowest among previous literature findings.

A Rare Case of Sigmoid Colon Carcinoma in Incarcerated Inguinal Hernia

Incarcerated inguinal hernia is a common diagnosis in patients presenting a painful and nonreducible groin mass. Although the diagnosis is usually made by physical examination, the content of the hernia sac and the extent of the surgical operation may vary and can require multimodal imaging integration (e.g., ultrasonography, computed tomography); the usual finding is a segment of small bowel and, less commonly, large bowel. We present an extremely rare case of a sigmoid cancer incarcerated in a left inguinal hernia and infiltrating the spermatic cord. The patient underwent whole-body computed tomography (CT) with contrast agent injection for staging, followed by a left hemicolectomy paralleled by a unilateral orchiectomy.

Peripheral artery disease: the new frontiers of imaging techniques to evaluate the evolution of regenerative medicine

Introduction: Stem cells (ESC, iPSC, MSC) are known to have intrinsic regenerative properties. In the last decades numerous findings have favored the development of innovative therapeutic protocols based on the use of stem cells (Regenerative Medicine/Cell Therapy) for the treatment of numerous diseases including PAD, with promising results in preclinical studies. So far, several clinical studies have shown a general improvement of the patient's clinical outcome, however they possess many critical issues caused by the non-randomized design of the limited number of patients examined, the type cells to be used, their dosage, the short duration of treatment and also their delivery strategy. Areas covered: In this context, the use of the most advanced molecular imaging techniques will allow the visualization of very important physio-pathological processes otherwise invisible with conventional techniques, such as angiogenesis, also providing important structural and functional data. Expert opinion: The new frontier of cell therapy applied to PAD, potentially able to stop or even the process that causes the disease, with particular emphasis on the clinical aspects that different types of cells involve and on the use of more innovative molecular imaging techniques now available.

Microarray expression in peri-implant tissue next to different titanium implant surfaces predicts clinical outcomes: a split-mouth study

OBJECTIVES

This split-mouth study evaluated miRNA expression of tissues around implants with different surface treatments.

MATERIAL AND METHODS

Each patient of the sample (five men and five women) received two implants (one control and one test) into an edentulous quadrant to support fixed partial dentures. The control implants (Osseotite) had a dual acid-etched (DAE) surface in the apical portion and a machined coronal part, test implants (Full Osseotite, FOSS) were completely DAE. Machined healing abutments were placed on control implants and DAE abutments on test ones. All implants were assigned codes for blinding. Standardized periapical radiographs were taken at baseline, 2 and 6 months, and 1 year after surgery. Plaque index (PI), bleeding on probing (BOP), and probing depth (PD) were recorded at 3 and 6 weeks, and 2, 3, 6, and 12 months post-implant placement. After 3 months, a mini-invasive sample of soft tissue was collected from seven patients (four women and three men) for miRNA microarray analysis.

RESULTS

Control implants showed greater bone resorption (BR) and lower PI: this was not statistically significant. No statistically significant differences in BOP and PD appeared. miRNA modulated by implant surfaces as well as by other clinical conditions has been identified. miRNA microarray analysis revealed that: (i) implant sites with low PI and absence of BOP had a miRNA expression profile similar to those with plaque and absence of BOP; sites with high PI and high BOP had a different profile. (ii) Implant sites with BOP presented similar profiles independently from implant surface. (iii) Implant sites with high PI and normal BR differed from others for miRNA expression profile. (iv) Implant sites with normal BR despite high BOP differed from others. This profile resembled that of FOSS implants. (v) Implant surface affected BR; groups having similar BR clusterized differently according to the implant type.

CONCLUSIONS

DAE surfaces induced lower BR and more plaque accumulation: This did not affect the health of soft tissues. miRNA analysis indicated that soft tissue inflammation is more related to gene expression profile than to plaque or to implant surface. Specific miRNA profile can protect implant sites from bleeding and BR irrespective of plaque accumulation.

Sinus floor elevation using osteotomes or piezoelectric surgery

The aim of this paper is to describe a technique for sinus floor augmentation with a 1-step crestal approach where the residual bone is ≤ 7.5mm. 36 implants were installed in 25 patients in the atrophic posterior maxilla immediately after sinus floor elevation. Sinus floor elevation was performed with a crestal approach using either osteotomes and burs or piezosurgery. Standardized intraoral radiographs were taken prior to surgery and 1 year after surgery. The mean residual bone height was 5.61 mm (range 3-7.5mm). The mean gain of sinus elevation was 6.78 mm (range 3.5-10mm) at 1 year after surgery. Two patients dropped out of the study. Of the 23 patients completing the study, one implant failed, whilst the remaining 33 implants were stable 12 months after surgery (cumulative survival rate 97%). A statistically significantly higher bone height was achieved with tapered implants compared with cylindrical implants (P<0.05). No statistically significant differences were found in bone level using osteotomes or piezosurgery. Piezosurgery was considered to provide less discomfort for the patient and greater convenience for the surgeon.

Degenerative periodontal-diseases and oral osteonecrosis: the role of gene-environment interactions

Chronic-degenerative dentistry diseases, including periodontal diseases and oral osteonecrosis, are widespread in human populations and represent a significant problem for public health. These diseases result from pathogenic mechanisms created by the interaction between environmental genotoxic risk-factors and genetic assets conferring individual susceptibility. Osteonecrosis occurs in subjects undergoing exposure to high doses of DNA-damaging agents for chemo- and radiotherapy of neoplastic diseases. In susceptible patients, ionizing radiation and biphosphonate-chemotherapy induce severe, progressive, and irreversible degeneration of facial bones, resulting in avascular necrosis of the jaw. This may also occur in patients receiving biphosphonate for osteoporosis therapy. Periodontal diseases include chronic, aggressive, and necrotizing periodontitis, often resulting in severe alteration of periodontal tissues and tooth loss. Cigarette smoking and chronic inflammation caused by specific bacteria are the main risk factors for periodontitis. Oxidative damage plays a fundamental pathogenic role, as established by detection of mitochondrial DNA damage in the gingival tissue of patients with periodontitis. Endogenous risk factors in dental diseases include polymorphisms for metabolic enzymes such as glutathione transferases M1 and T1, N-acetyl transferase 2, and CYP 1A1. Other genetic polymorphisms that confer susceptibility to dentistry diseases affect genes encoding metalloproteases (involved in periodontal tissue remodeling and degradation), cytokines (involved in inflammation), prothrombin, and DNA repair activities. These findings provide evidence that dentistry diseases are related to risk factors associated with environmental mutagenesis. This issue warrants future investigations aimed at improving oral health and preventing oral degenerative diseases using molecular and experimental approaches currently utilized in mutagenicity studies.

Use of Yarrowia lipolytica strains for the treatment of olive mill wastewater

The principal aim of this research was to evaluate the ability of different Yarrowia lipolytica strains, having different origin, to grow in olive mill wastewater (OMW) and reduce its COD level. All the strains were able to grow in undiluted OMW; the comparison between the data obtained in a semi-synthetic medium and in OMW suggests that lipases with different specificity can be produced in relation to the medium composition. Under the adopted conditions, the reduction of the OMW COD values varied from 1.47% and 41.22% of the initial value. Some strains determined a significant reduction of polyphenol content, while other ones caused its apparent increase. Moreover, some Y. lipolytica strains, isolated from chilled foods, produced the highest citric acid concentrations. These results evidenced that some Y. lipolytica strains are good candidates for the reduction of the pollution potential of OMW and for the production of enzymes and metabolites such as lipase and citric acid.

Interactions between high pressure homogenization and antimicrobial activity of lysozyme and lactoperoxidase

It was the objective of this work to evaluate the effect of high pressure homogenization on the activity of antimicrobial enzymes such as lysozyme and lactoperoxidase against a selected group of Gram positive and Gram negative species inoculated in skim milk. Lactobacillus helveticus, Lactobacillus plantarum and Listeria monocytogenes were the most pressure resistant species while Bacillus subtilis, Pseudomonas putida, Salmonella typhimurium, Staphylococcus aureus, Proteus vulgaris and Salmonella enteritidis were found to be very sensitive to the hyperbaric treatment. The enzyme addition enhanced the instantaneous pressure efficacy on almost all the considered species as indicated by their instantaneous viability loss following the treatment. Moreover, the combination of the enzyme and high pressure homogenization significantly affected the recovery and growth dynamics of several of the considered species. Although L. monocytogenes was slightly sensitive to pressure, the combination of the two stress factors induced a significant viability loss within 3 h and an extension of lag phases in skim milk during incubation at 37 degrees C. The hypothesis formulated in this work is that the interaction of high pressure homogenization and lysozyme or lactoperoxidase is associated to conformational modifications of the two proteins with a consequent enhancement of their activity. This hypothesis is supported by the experimental results also regarding the increased antimicrobial activity against L. plantarum of the previously pressurised lysozyme with respect to that of the native enzyme.