Symmetry recovery in zygomaticomaxillary complex fractures compared to normal unfractured population: A new reliable 3D evaluation

OBJECTIVE

This study aims to quantify the facial symmetry of surgically treated zygomaticomaxillary complex (ZMC) fractures through a new reliable three-dimensional evaluation method, which is crucial for improving post-operative aesthetic and functional outcomes.

MATERIAL AND METHODS

Healthy patients and patients with surgically treated ZMC fractures were retrospectively reviewed. Using Brainlab Elements® the zygomatic bone and the orbit of each patient was segmented and mirrored. Subsequently, the mirrored side was matched with the other side via volume-based registration, using the segmented orbit as reference. Volumetric asymmetry was measured using 3-matic software, and a surface-based matching technique was used to calculate the mean absolute differences (MAD) between the surfaces of the two sides of the ZMC. The reliability of this novel method using volume-based registration was tested, and the intra-class correlation coefficient was assessed.

RESULTS

The MAD between the surfaces of the left and right sides in the control group was 0.51 mm (±0.09). As for the ZMC fracture group, MAD was 0.78 mm (±0.20) and 0.72 mm (±0.15) pre- and post-operatively, respectively. The MAD showed statistically significant differences between pre- and post-operative groups (p = 0.005) and between control and post-operative groups (p < 0.001). The intra-class correlation coefficient was high (≥0.99).

CONCLUSIONS

This evaluation method using mirroring and volume-based registration to determine the symmetrical position of the ZMC is reliable. The surface-based measurements revealed an improved symmetry after surgery. However, the symmetry of the treated patients remained lower than the control group.

Quantifying the potential of morphological parameters for human dental identification: part 1-proof of concept

In forensic identification, lack of eccentric characteristics of intact dentitions hinders correct ante-mortem/post-mortem (AM/PM) matching. It remains unclear which morphological dental parameters hold strong potential as identifiers. This study aimed to establish a method to quantify and rank the identifying potential of one (or a combination of) continuous morphological parameter(s), and to provide a proof of concept. First, a statistic was defined that quantifies the identifying potential: the mean potential set (MPS). The MPS is derived from inter-observer agreement data and it indicates the percentage of subjects in the AM reference dataset who at least need to be considered to detect the correct PM subject. This was calculated in a univariate and a multivariate setting. Second, the method was validated on maxillary first molar crowns of 82 3D-digitally scanned cast models. Standardized measurements were registered using 3D modeling software (3-Matic Medical 12.0, Materialise N.V., Leuven, Belgium): tooth depth, angles between cusps, distances between cusps, distances between the cusps, and the mesial pit. A random sample of 40 first molars was measured by a second examiner. Quantifying and ranking the parameters allowed selecting those with the strongest identifying potential. This was found for the tooth depth (1 measurement, MPS = 17.1%, ICC = 0.879) in the univariate setting, and the angles between cusps (4 measurements, MPS = 3.9%) in the multivariate setting. As expected, the multivariate approach held significantly stronger identifying potential, but more measurements were needed (i.e., more time-consuming). Our method allows quantifying and ranking the potential of dental morphological parameters as identifiers using a clear-cut statistic.

Cumulative exposure and lifetime cancer risk from diagnostic radiation in patients undergoing orthognathic surgery: a cross-sectional analysis

Radiation doses in dentomaxillofacial imaging are typically very low. However, diagnostic and follow-up protocols in orthognathic surgery result in a patient-specific risk in effective dose. Estimating the cancer risks from these exposures remains abstract for many maxillofacial surgeons. In this study, 40 orthognathic patients were randomly sampled and their cumulative effective dose (ED) calculated. The lifetime attributable risk of cancer (LAR) was calculated based on the standard radiological protocol for orthognathic surgery follow-up using methods described in the BEIR VII report and RadRAT. The mean cumulative ED of the 40 sampled patients at the end of their 2-year follow-up period was 1.91 ± 0.58 mSv. The LAR at the end of follow-up was 17.65 (90% confidence interval 6.46-32.90) per 100,000 person-years for male orthognathic patients and 13.93 (90% confidence interval 6.27-25.24) per 100,000 person-years for female orthognathic patients. This represents 0.70% and 0.68%, respectively, of the baseline cancer risk for oral, thyroid, and brain cancer combined. Although theoretical, these results provide a framework for interpreting radiation doses and cancer risks in patients undergoing orthognathic surgery. Considering the increased radiation sensitivity in children and adolescents, indication-oriented and patient-specific imaging protocols should be advised.

Ethnopharmacological evaluation of Poppy seed oil in combination with Tramadol on behavioral paradigm and on dopamine, and cytokines levels

OBJECTIVE

The present study was taken up to evaluate the combination of two drugs in the management of behavioral disorders such as locomotor activity, muscle relaxation, analgesic, and anxiolytic activity.

MATERIALS AND METHODS

In the methodology, Wistar rats weighing (150-180 g) were divided into six groups of 6 each (n=6). All the animals (groups II to VI) were subjected to stress and analyzed for anxiolytic activity using an elevated plus maze. The animals were treated for 28 days with poppy seed oil in lower and higher doses (1,000 and 2,000 mg/kg), tramadol in lower and higher doses (1.5 and 3 mg/kg) as individual groups, and one group with a combination of both drugs in lower doses.

RESULTS

The results depicted showed that the combined treatment had significantly (**p <0.001) improvised behavior deficits, extemporized, and diminished anxiety-like attitude in rats, and showed the analgesic property in a significant manner. The pro-inflammatory cytokines TNF-α and IL-1β were evaluated in the serum and were observed to be lessened the values of both in a significant manner with the co-administration of both the test drugs. The dopamine concentrations were also determined in the serum, which disclosed a decline (**p <0.001) significantly.

CONCLUSIONS

It was concluded from the results that a combined effect of drugs might be beneficial in the management of behavioral disorders and pain management.

Iatrogenic retroposition of the lips sequel after bicuspid extraction-a retrospective study

AIM

This study aims to explore the prevalence of Iatrogenic retroposition of the lips sequel (IRLS) after bicuspid extraction, associated dentofacial characteristics and the effectiveness of surgical treatment.

MATERIAL

and methods: Patients with bicuspid extraction as part of an orthodontic treatment plan were retrospectively included. IRLS was identified by clinical evaluation and cephalometric Legan and Burstone analysis. Association of demographic and cephalometric variables were assessed. The effectiveness of combined orthodontic-orthognathic correction of the retroposition of the lips was evaluated.

RESULTS

Out of 144 patients with extracted bicuspids, eight Class I patients, nine Class II patients and five Class III patients were seeking treatment because their lips had retruded as a consequence of compensating orthodontic treatment. Lower jaw bicuspid extraction and a decreased vertical facial height in Class II patients correlated significantly more with IRLS development. Postoperative cephalometric analysis of orthodontic-orthognathic treated patients reported improvement in lip projection and naso-labial angle. Only two Class I patients reported postoperative normalization of the lip position according to Legan and Burstone.

CONCLUSION

The consequence of bicuspid extractions on soft tissue profile differs according to skeletal jaw relation. The impact of orthognathic surgery on IRLS is beneficial, although insufficient to completely correct the facial profile when judged on cephalometric standards.

Automatic 3D dense phenotyping provides reliable and accurate shape quantification of the human mandible

Automatic craniomaxillofacial (CMF) three dimensional (3D) dense phenotyping promises quantification of the complete CMF shape compared to the limiting use of sparse landmarks in classical phenotyping. This study assesses the accuracy and reliability of this new approach on the human mandible. Classic and automatic phenotyping techniques were applied on 30 unaltered and 20 operated human mandibles. Seven observers indicated 26 anatomical landmarks on each mandible three times. All mandibles were subjected to three rounds of automatic phenotyping using Meshmonk. The toolbox performed non-rigid surface registration of a template mandibular mesh consisting of 17,415 quasi landmarks on each target mandible and the quasi landmarks corresponding to the 26 anatomical locations of interest were identified. Repeated-measures reliability was assessed using root mean square (RMS) distances of repeated landmark indications to their centroid. Automatic phenotyping showed very low RMS distances confirming excellent repeated-measures reliability. The average Euclidean distance between manual and corresponding automatic landmarks was 1.40 mm for the unaltered and 1.76 mm for the operated sample. Centroid sizes from the automatic and manual shape configurations were highly similar with intraclass correlation coefficients (ICC) of > 0.99. Reproducibility coefficients for centroid size were < 2 mm, accounting for < 1% of the total variability of the centroid size of the mandibles in this sample. ICC’s for the multivariate set of 325 interlandmark distances were all > 0.90 indicating again high similarity between shapes quantified by classic or automatic phenotyping. Combined, these findings established high accuracy and repeated-measures reliability of the automatic approach. 3D dense CMF phenotyping of the human mandible using the Meshmonk toolbox introduces a novel improvement in quantifying CMF shape.

Three-dimensional evaluation of distal and proximal segment skeletal relapse following isolated mandibular advancement surgery in 100 consecutive patients: A one-year follow-up study

The aim of this study was to perform a three-dimensional evaluation of the skeletal relapse of the proximal and distal mandibular segments following isolated bilateral sagittal split osteotomy advancement surgery. One hundred consecutive patients (mean age 25.8±11.7 years), comprising 65 female patients (mean age 26.4±12.1 years) and 35 male patients (mean age 24.6±11.0 years) requiring mandibular advancement without genioplasty, were enrolled prospectively in the study. Cone beam computed tomography scans were acquired for each patient at three time-points: preoperatively, immediately (1-6 weeks) after surgery, and 1 year after surgery. A validated tool was utilized to assess the surgical movement and relapse. Based on percentage, the majority of the distal and proximal translational and rotational movements relapsed within the range of ≤2mm and ≤2°. The distal segment revealed a significant relapse in a posterior, inferior, and clockwise pitch direction. Both left and right proximal segments showed a significant translational relapse in the medial, posterior, and superior direction. Amongst the rotational parameters, proximal segments relapsed significantly in clockwise pitch, clockwise roll, and counterclockwise yaw direction. Overall, both distal and proximal bone segments showed a clinically acceptable translational and rotational stability. The proximal segments torqued towards their original position with a reduction of flaring.

Long-term stability of isolated advancement genioplasty, and influence of associated risk factors: A systematic review

The aim of this review was to investigate the skeletal and soft tissue stability of isolated advancement genioplasty after more than 1 year, and to observe the influence of associated risk factors. A literature search was performed on PubMed, Web of Science, Embase, ScienceDirect, and Cochrane. Only studies with at least 10 patients who underwent an isolated advancement genioplasty, and with a follow-up period of at least 1 year, were included. Of the 2224 records initially identified, eight articles met the eligibility criteria. The mean age of the total study population was 23 years and ranged from 19.1 to 26.5 years in the individual studies. The average surgical advancement at pogonion was 8.2 mm and ranged from 6.2 to 11.7 mm in the individual studies. After 1 year, the horizontal hard tissue relapse at the level of pogonion varied from 0.1 to 2.1 mm. In two studies, this was reported as statistically significant. Regarding the soft tissue, the horizontal relapse varied from 0.3 to 2.9 mm, which was also considered statistically significant in two studies. Isolated advancement genioplasty was found to be a predictable and stable orthognathic procedure in the sagittal plane at both soft and hard tissue levels. The amount of relapse was not associated with the fixation method or with the amount of surgical advancement.

Evaluation of long-term hard tissue relapse following surgical-orthodontic treatment in skeletal class II patients: A systematic review and meta-analysis

This systematic review and meta-analysis was performed to evaluate the long-term hard tissue stability and relapse factors following surgical-orthodontic treatment in skeletal class II patients. A literature search was conducted using Embase, Cochrane Central, Web of Science, and PubMed, yielding 3184 articles published up to January 2019. Risk of bias was assessed following the Cochrane handbook. Ten articles met the inclusion criteria. A total of 1079 patients were followed up for 5-13 years. The qualitative findings showed a variety of extrinsic and intrinsic factors affecting long-term stability. Meta-analysis for the amount and direction of cephalometric landmark displacement in the vertical and sagittal planes showed significant angular increases of ANB and backward relapse of SNB, however within the clinically acceptable range of 4°. In relation to linear measurements, the mean differences in all landmarks were within the clinically acceptable range of 2mm except for gonion. In conclusion, this systematic review showed multiple intrinsic and extrinsic factors responsible for relapse. However, the outcomes of the meta-analysis are limited due to the heterogeneity of data, small number of studies, and inconsistent methods of evaluation. Further high-quality studies utilising standardised three-dimensional methodologies are required to improve the level of evidence.

Semi-automatic magnetic resonance imaging based orbital fat volumetry: reliability and correlation with computed tomography

Post-processing analysis can provide valuable information for diagnosis and planning of orbital disorders. This cross-sectional study aims to evaluate the reliability of semi-automatic, orbital fat volumetry using magnetic resonance imaging (MRI). Two observers assessed the orbital fat volume using a standard MRI protocol (3T, T1w sequence) in 12 orbits diagnosed with Graves' orbitopathy (GO) and 10 healthy control orbits. MRI and computed tomography (CT) based analysis were compared. Intra-observer variability was good (intraclass correlation coefficient (ICC) 0.88; 95% confidence interval (CI) [0.70, 0.95]) and interobserver agreement was moderate (ICC 0.55; 95% CI [-0.09, 0.81]), which corresponds to a mean percentage difference of 1.3% and 17.9% of the total orbital fat volume. Mean differences between MRI and CT measurements were, respectively, 1.1 cm³ (P= 0.064, 95% CI [-0.20, 2.43]) and 1.4 cm³ (P=0.016, 95% CI [0.21, 2.56]) for the control and the GO group. MRI volumetry was strongly correlated with CT (Pearson's r= 0.7, P<0.001). We conclude that orbital fat volumetry is feasible with a semi-automatic segmentation procedure and standard MRI protocol. Correlation with CT volumetry is good, but considerable bias may derive from observer variability and these errors should be taken into account for the purpose of volumetric analysis. Better definition of error sources may increase measurement accuracy.

Long-term neurosensory disturbances after modified sagittal split osteotomy

We have investigated the long-term incidence of neurosensory disturbances after modified bilateral sagittal split osteotomy, and identified associated risk factors. We prospectively studied 376 patients, and their self-reported neurosensory disturbances were evaluated six months, and one, two, and three years postoperatively. The correlations between the following risk factors and neurosensory disturbances were investigated using univariate analysis and stepwise multivariate analysis: age at operation, sex, type of movement (advancement, setback, or rotation), concurrent genioplasty, type of detachment, iliac crest bone graft, and use of dicalcium phosphate synthetic bone graft. Probabilities of less than 0.05 were accepted as significant. Three years postoperatively, 57 patients (15%) reported altered sensation of the lower lip or chin. Older age correlated significantly with neurosensory disturbances (p<0.0001). Greater mandibular advancement correlated with postoperative "positive" neurosensory phenomena (right side p=0.08; left side p=0.03). Intraoperative surgical manipulation of the left inferior alveolar nerve was significantly associated with postoperative hypoaesthesia (p=0.014). Older age at surgery, extensive mandibular advancement, and surgical manipulation of the left inferior alveolar nerve, were associated with long-term neurosensory disturbances after modified bilateral sagittal split osteotomy. The modified operation seems to safeguard the inferior alveolar nerve from transection, without causing damage to other nerves.

How accurate is digital-assisted Le Fort I maxillary osteotomy? A three-dimensional perspective

The aim of this study was to evaluate the surgical accuracy of Le Fort I surgery compared to the three-dimensional (3D) virtual planning. Fifty-five patients (29 males, 26 females; age range 15-58 years) with skeletal class III malocclusion, who underwent bimaxillary surgery were included. A validated 3D accuracy assessment tool was utilized to assess the surgical accuracy of the maxillary positioning. For translational movements, the least amount of error was associated with mediolateral translation, whereas the surgical accuracy for anteroposterior and superoinferior translation showed a tendency towards a more posterior and inferior positioning of the maxilla compared to the planning. For rotational movements, the highest discrepancy was observed for pitch. Linear regression showed increased inaccuracy with increasing advancement for anteroposterior, superoinferior and pitch movements. To conclude, 3D virtual planning of maxilla was generally accurate when compared to achieved outcome for skeletal class III patients undergoing bimaxillary surgery.

Use of CBCT Guidance for Tooth Autotransplantation in Children

Tooth autotransplantation (TAT) offers a viable biological approach to tooth replacement in children and adolescents. The aim of this study was to evaluate the outcome of the cone-beam computed tomographic (CBCT)–guided TAT compared to the conventional TAT protocol and to assess the 3-dimensional (3D) patterns of healing after CBCT-guided TAT (secondary aim). This study included 100 autotransplanted teeth in 88 patients. Each experimental group consisted of 50 transplants in 44 patients (31 males and 19 females). The mean (SD) age at the time of surgery was 10.7 (1.1) y for the CBCT-guided group. This was 10.6 (1.3) y for the conventional group. The mean (SD) follow-up period was 4.5 (3.1) y (range, 1.1 to 10.4 y). Overall survival rate for the CBCT-guided TAT was 92% with a success rate of 86% compared to an 84% survival rate and a 78% success rate for the conventional group ( P > 0.005). The following measurements were extracted from the 3D analysis: root hard tissue volume (RV), root length (RL), apical foramen area (AFA), and mean and maximum dentin wall thickness (DWT). Overall, the mean (SD) percentage of tissue change was as follows: RV gain by 65.8% (34.6%), RL gain by 37.3% (31.5%), AFA reduction by 91.1% (14.9%), mean DWT increase by 107.9% (67.7%), and maximum DWT increase by 26.5% (40.1%). Principal component analysis (PCA) identified the mean DWT, RV, and maximum DWT as the parameters best describing the tissue change after TAT. Cluster analysis applied to the variables chosen by the PCA classified the CBCT group into 4 distinct clusters (C1 = 37.2%, C2 = 17.1%, C3 = 28.6%, C4 = 17.1%), revealing different patterns of tissue healing after TAT. The CBCT-guided approach increased the predictability of the treatment. The 3D analysis provided insights into the patterns of healing. CBCT-guided TAT could be adopted as an alternative for the conventional approach. (Clinical trial center and ethical board University Hospitals, KU Leuven: S55287; ClinicalTrials.gov Identifier: NCT02464202)

Condylar changes after orthognathic surgery for class III dentofacial deformity: a systematic review

After orthognathic surgery for class II dentofacial deformity, remodelling of the mandibular condyle will take place. In a number of cases, this may evolve towards a phenomenon of condylar resorption. Yet, studies on the occurrence of this complication after the correction of a class III deformity are scarce. A systematic review of the literature was performed with the aim of identifying reports on condylar resorption or remodelling after orthognathic surgery for class III dentofacial deformity. A search of the international databases yielded 12 eligible studies. Eight studies reported some degree of postoperative condylar remodelling, while symptoms of condylar resorption were only described in a limited group of patients. Thus, the literature may show evidence of condylar remodelling after orthognathic treatment of class III patients, and anecdotal reports of condylar resorption exist. The small sample sizes, heterogeneity in methods and outcomes, and use of two-dimensional radiographs indicate the need for updated long-term research. In the future, the use of cone beam computed tomography data for volumetric and morphological condylar analysis in combination with three-dimensional cephalometry may provide the opportunity to further elucidate this phenomenon and better characterize its aetiology.

Three-dimensional aesthetic assessment of class II patients before and after orthognathic surgery and its association with quantitative surgical changes

The aim of this study was to compare evaluations of the aesthetic outcome of class II orthognathic patients, as performed by observers with varying expertise using three-dimensional (3D) facial images, and to examine the relationship of aesthetic ratings in relation to quantitative surgical changes. Pre- and postoperative 3D facial images of 20 surgically treated class II patients (13 female, 7 male) were assessed for aesthetics by orthodontists, maxillofacial surgeons, and laypeople. Attractiveness ratings for the lips, chin, and overall facial aesthetics were evaluated on a 5-point Likert scale. Correlation between the aesthetic scores was obtained and quantitative surgical changes were examined. For all groups of observers, significant improvements in attractiveness scores were found, especially for the chin assessment. Orthodontists perceived the greatest improvement and laypeople the smallest. Overall, laypeople scored higher with less variability, but with lower intra- and inter-observer agreement. No significant correlation was found between the aesthetic improvement and soft tissue surgical changes. To avoid patient dissatisfaction, it is important to bear in mind that the demands and perception of aesthetic improvement after orthognathic surgery are higher for clinicians than for the general public.

Design and application of a structured phantom for detection performance comparison between breast tomosynthesis and digital mammography

This paper introduces and applies a structured phantom with inserted target objects for the comparison of detection performance of digital breast tomosynthesis (DBT) against 2D full field digital mammography (FFDM). The phantom consists of a 48 mm thick breast-shaped polymethyl methacrylate (PMMA) container filled with water and PMMA spheres of different diameters. Three-dimensionally (3D) printed spiculated masses (diameter range: 3.8-9.7 mm) and non-spiculated masses (1.6-6.2 mm) along with microcalcifications (90-250 µm) were inserted as targets. Reproducibility of the phantom application was studied on a single system using 30 acquisitions. Next, the phantom was evaluated on five different combined FFDM & DBT systems and target detection was compared for FFDM and DBT modes. Ten phantom images in both FFDM and DBT modes were acquired on these 5 systems using automatic exposure control. Five readers evaluated target detectability. Images were read with the four-alternative forced-choice (4-AFC) paradigm, with always one segment including a target and 3 normal background segments. The percentage of correct responses (PC) was assessed based on 10 trials of each reader for each object type, size and imaging modality. Additionally, detection threshold diameters at 62.5 PC were assessed via non-linear regression fitting of the psychometric curve. The reproducibility study showed no significant differences in PC values. Evaluation of target detection in FFDM showed that microcalcification detection thresholds ranged between 110 and 118 µm and were similar compared to the detection in DBT (range of 106-158 µm). In DBT, detection of both mass types increased significantly (p  =  0.0001 and p  =  0.0002 for non-spiculated and spiculated masses respectively) compared to FFDM, achieving almost 100% detection for all spiculated mass diameters. In conclusion, a structured phantom with inserted targets was able to show evidence for detectability differences between FFDM and DBT modes for five commercial systems. This phantom has potential for application in task-based assessment at acceptance and commissioning testing of DBT systems.

Three-dimensional printed final occlusal splint for orthognathic surgery: design and validation

Orthognathic surgery is indicated for the treatment of significant skeletal malocclusion and is normally prepared using conventional face bows combined with two-dimensional cephalometric analysis and manually made splints. With recent developments in oral imaging, more orthognathic surgeries are being planned using three-dimensional computer-aided design and manufacturing (3D CAD/CAM) software. The purpose of this study was to present a protocol for the design and 3D printing of final digital occlusal splints based on 3D planning of orthognathic surgery and to validate the accuracy of these splints. The 3D virtual planning was performed in PROPLAN software (Materialise). The required data were then exported into 3-matic software (Materialise) to design the splints, which were 3D printed in biocompatible material using an Objet Connex 350 printer (Stratasys). To validate the accuracy of the splints, the cases of 20 patients undergoing orthognathic surgery were analysed. The splints were assessed clinically and quantitatively by comparing the printed splints to the conventional analogue set-up (clinical standard) and recording the absolute distance errors of three landmarks. The mean absolute distance error was 0.4mm (standard deviation 0.17mm), which falls within clinically accepted error margins. The absolute distance error ranged from 0.12 to 0.88mm.

Development and validation of a hybrid simulation technique for cone beam CT: application to an oral imaging system

This paper proposes a hybrid technique to simulate the complete chain of an oral cone beam computed tomography (CBCT) system for the study of both radiation dose and image quality. The model was developed around a 3D Accuitomo 170 unit (J Morita, Japan) with a tube potential range of 60-90 kV. The Monte Carlo technique was adopted to simulate the x-ray generation, filtration and collimation. Exact dimensions of the bow-tie filter were estimated iteratively using experimentally acquired flood images. Non-flat radiation fields for different exposure settings were mediated via 'phase spaces'. Primary projection images were obtained by ray tracing at discrete energies and were fused according to the two-dimensional energy modulation templates derived from the phase space. Coarse Monte Carlo simulations were performed for scatter projections and the resulting noisy images were smoothed by Richardson-Lucy fitting. Resolution and noise characteristics of the flat panel detector were included using the measured modulation transfer function (MTF) and the noise power spectrum (NPS), respectively. The Monte Carlo dose calculation was calibrated in terms of kerma free-in-air about the isocenter, using an ionization chamber, and was subsequently validated by comparison against the measured air kerma in water at various positions of a cylindrical water phantom. The resulting dose discrepancies were found <10% for most cases. Intensity profiles of the experimentally acquired and simulated projection images of the water phantom showed comparable fractional increase over the common area as changing from a small to a large field of view, suggesting that the scatter was accurately accounted. Image validation was conducted using two small phantoms and the built-in quality assurance protocol of the system. The reconstructed simulated images showed high resemblance on contrast resolution, noise appearance and artifact pattern in comparison to experimentally acquired images, with <5% difference for voxel values of the aluminum and air insert regions and <3% difference for voxel uniformity across the homogeneous PMMA region. The detector simulation by use of the MTF and NPS data exhibited a big influence on noise and the sharpness of the resulting images. The hybrid simulation technique is flexible and has wide applicability to CBCT systems.

Simulation of 3D objects into breast tomosynthesis images

Digital breast tomosynthesis is a new three-dimensional (3D) breast-imaging modality that produces images of cross-sectional planes parallel to the detector plane from a limited number of X-ray projections over a limited angular range. Several technical and clinical parameters have not yet been completely optimised. Some of the open questions could be addressed experimentally; other parameter settings cannot be easily realised in practice and the associated optimisation process requires therefore a theoretical approach. Rather than simulating the complete 3D imaging chain, it is hypothesised that the simulation of small lesions into clinical (or test object) images can be of help in the optimisation process. In the present study, small 3D objects have been simulated into real projection images. Subsequently, these hybrid projection images are reconstructed using the routine clinical reconstruction tools. In this study, the validation of this simulation framework is reported through the comparison between simulated and real objects in reconstructed planes. The results confirm that there is no statistically significant difference between the simulated and the real objects. This suggests that other small mathematical or physiological objects could be simulated with the same approach.

Hypotensive action of coumarin glycosides from Daucus carota

Daucus carota (carrot) has been used in traditional medicine to treat hypertension. Activity-directed fractionation of aerial parts of D. carota resulted in the isolation of two cumarin glycosides coded as DC-2 and DC-3. Intravenous administration of these compounds caused a dose-dependent (1-10 mg/kg) fall in arterial blood pressure in normotensive anaesthetised rats. In the in vitro studies, both compounds caused a dose-dependent (10-200 microg/ml) inhibitory effect on spontaneously beating guinea pig atria as well as on the K+ -induced contractions of rabbit aorta at similar concentrations. These results indicate that DC-2 and DC-3 may be acting through blockade of calcium channels and this effect may be responsible for the blood pressure lowering effect of the compounds observed in the in vivo studies.

Failure to thrive--a retrospective profile

"This paper presents the incidence of growth failure in 44 patients for which no organic cause was discovered after investi gation. This group of patients, collectively termed failure-to-thrive, represents the sec ond largest diagnostic category of patients with growth failure admitted to a children's hospital in one year. An examination of various features of this group from a review of the medical and psychosocial histories is made and changes in growth patterns in hos pitalization and follow up are documented."