Predicting nanomaterials pulmonary toxicity in animals by cell culture models: Achievements and perspectives

Animal experiments are highly relevant models for the assessment of toxicological effects of engineered nanomaterials (ENMs), due to lack of biomonitoring and epidemiological studies. However, the expanding number of ENMs with different physico-chemical properties strains this approach, as there are ethical concerns and economical challenges with the use of animals in toxicology. There is an urgent need for cell culture models that predict the level of toxicological responses in vivo, consequently reducing or replacing the use of animals in nanotoxicology. However, there is still a limited number of studies on in vitro-in vivo correlation of toxicological responses following ENMs exposure. In this review, we collected studies that have compared in vitro and in vivo toxic effects caused by ENMs. We discuss the influence of cell culture models and exposure systems on the predictability of in vitro models to equivalent toxic effects in animal lungs after pulmonary exposure to ENMs. In addition, we discuss approaches to qualitatively or quantitatively compare the effects in vitro and in vivo. The magnitude of toxicological responses in cells that are exposed in submerged condition is not systematically different from the response in cells exposed in air-liquid interface systems, and there appears to be similar ENMs hazard ranking between the two exposure systems. Overall, we show that simple in vitro models with cells exposed to ENMs in submerged condition can be used to predict toxic effects in vivo, and identify future strategies to improve the associations between in vitro and in vivo ENMs-induced pulmonary toxicity. This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials.

Assessment of primary and inflammation-driven genotoxicity of carbon black nanoparticles in vitro and in vivo

Carbon black nanoparticles (CBNPs) have a large surface area/volume ratio and are known to generate oxidative stress and inflammation that may result in genotoxicity and cancer. Here, we evaluated the primary and inflammatory response-driven (i.e. secondary) genotoxicity of two CBNPs, Flammruss101 (FL101) and PrintexXE2B (XE2B) that differ in size and specific surface area (SSA), and cause different amounts of reactive oxygen species. Three doses (low, medium and high) of FL101 and XE2B were assessed in vitro in the lung epithelial (A549) and activated THP-1 (THP-1a) monocytic cells exposed in submerged conditions for 6 and 24 h, and in C57BL/6 mice at day 1, 28 and 90 following intratracheal instillation. In vitro, we assessed pro-inflammatory response as IL-8 and IL-1β gene expression, and in vivo, inflammation was determined as inflammatory cell infiltrates in bronchial lavage (BAL) fluid and as histological changes in lung tissue. DNA damage was quantified in vitro and in vivo as DNA strand breaks levels by the alkaline comet assay. Inflammatory responses in vitro and in vivo correlated with dosed CBNPs SSA. Both materials induced DNA damage in THP-1a (correlated with dosed mass), and only XE2B in A549 cells. Non-statistically significant increase in DNA damage in vivo was observed in BAL cells. In conclusion, this study shows dosed SSA predicted inflammation both in vivo and in vitro, whereas dosed mass predicted genotoxicity in vitro in THP-1a cells. The observed lack of correlation between CBNP surface area and genotoxicity provides little evidence of inflammation-driven genotoxicity in vivo and in vitro.

Grouping MWCNTs based on their similar potential to cause pulmonary hazard after inhalation: a case-study

BACKGROUND

The EU-project GRACIOUS developed an Integrated Approach to Testing and Assessment (IATA) to support grouping high aspect ratio nanomaterials (HARNs) presenting a similar inhalation hazard. Application of grouping reduces the need to assess toxicity on a case-by-case basis and supports read-across of hazard data from substances that have the data required for risk assessment (source) to those that lack such data (target). The HARN IATA, based on the fibre paradigm for pathogenic fibres, facilitates structured data gathering to propose groups of similar HARN and to support read-across by prompting users to address relevant questions regarding HARN morphology, biopersistence and inflammatory potential. The IATA is structured in tiers, allowing grouping decisions to be made using simple in vitro or in silico methods in Tier1 progressing to in vivo approaches at the highest Tier3. Here we present a case-study testing the applicability of GRACIOUS IATA to form an evidence-based group of multiwalled carbon nanotubes (MWCNT) posing a similar predicted fibre-hazard, to support read-across and reduce the burden of toxicity testing.

RESULTS

The case-study uses data on 15 different MWCNT, obtained from the published literature. By following the IATA, a group of 2 MWCNT was identified (NRCWE006 and NM-401) based on a high degree of similarity. A pairwise similarity assessment was subsequently conducted between the grouped MWCNT to evaluate the potential to conduct read-across and fill data gaps required for regulatory hazard assessment. The similarity assessment, based on expert judgement of Tier 1 assay results, predicts both MWCNT are likely to cause a similar acute in vivo hazard. This result supports the possibility for read-across of sub-chronic and chronic hazard endpoint data for lung fibrosis and carcinogenicity between the 2 grouped MWCNT. The implications of accepting the similarity assessment based on expert judgement of the MWCNT group are considered to stimulate future discussion on the level of similarity between group members considered sufficient to allow regulatory acceptance of a read-across argument.

CONCLUSION

This proof-of-concept case-study demonstrates how a grouping hypothesis and IATA may be used to support a nuanced and evidence-based grouping of 'similar' MWCNT and the subsequent interpolation of data between group members to streamline the hazard assessment process.

Systematic review on primary and secondary genotoxicity of carbon black nanoparticles in mammalian cells and animals

Carbon black exposure causes oxidative stress, inflammation and genotoxicity. The objective of this systematic review was to assess the contributions of primary (i.e. direct formation of DNA damage) and secondary genotoxicity (i.e., DNA lesions produced indirectly by inflammation) to the overall level of DNA damage by carbon black. The database is dominated by studies that have measured DNA damage by the comet assay. Cell culture studies indicate a genotoxic action of carbon black, which might be mediated by oxidative stress. Many in vivo studies originate from one laboratory that has investigated the genotoxic effects of Printex 90 in mice by intra-tracheal instillation. Meta-analysis and pooled analysis of these results demonstrate that Printex 90 exposure is associated with a slightly increased level of DNA strand breaks in bronchoalveolar lavage cells and lung tissue. Other types of genotoxic damage have not been investigated as thoroughly as DNA strand breaks, although there is evidence to suggest that carbon black exposure might increase the mutation frequency and cytogenetic endpoints. Stratification of studies according to concurrent inflammation and DNA damage does not indicate that carbon black exposure gives rise to secondary genotoxicity. Even substantial pulmonary inflammation is at best only associated with a weak genotoxic response in lung tissue. In conclusion, the review indicates that nanosized carbon black is a weak genotoxic agent and this effect is more likely to originate from a primary genotoxic mechanism of action, mediated by e.g., oxidative stress, than inflammation-driven (secondary) genotoxicity.

Pro-inflammatory response and genotoxicity caused by clay and graphene nanomaterials in A549 and THP-1 cells

Nanoclays and graphene oxide nanomaterials represent a class of materials sharing similar shapes constituted of high aspect ratio platelets. The increased production of these materials for various industrial applications increases the risk of occupational exposure, consequently with elevated risk of adverse reactions and development of pulmonary diseases, including lung cancer. In this study, pro-inflammatory responses and genotoxicity were assessed in alveolar epithelial cells (A549) and activated THP-1 macrophages (THP-1a) after exposure to three nanoclays; a pristine (Bentonite) and two surface modified (benzalkonium chloride-coated Nanofil9, and dialkyldimethyl-ammonium-coated NanofilSE3000); graphene oxide (GO) and reduced graphene oxide (r-GO) nanomaterials. The pro-inflammatory response in terms of IL-8 expression was strongest in cells exposed to Bentonite, whereas surface modification resulted in decreased toxicity in both cell lines when exposed to Nanofil9 and NanofilSE3000. GO and r-GO induced a pro-inflammatory response in A549 cells, while no effect was detected with the two nanomaterials on THP-1a cells. The pro-inflammatory response was strongly correlated with in vivo inflammation in mice after intra-tracheal instillation when doses were normalized against surface area. Genotoxicity was assessed as DNA strand breaks, using the alkaline comet assay. In A549 cells, an increase in DNA strand breaks was detected only in cells exposed to Bentonite, whereas Bentonite, NanofilSE3000 and GO caused an increased level of genotoxicity in THP-1a cells. Genotoxicity in THP-1a cells was concordant with the DNA damage in bronchoalveolar lavage fluid cells following 1 and 3 days after intra-tracheal instillation in mice. In conclusion, this study shows that surface modification of pristine nanoclays reduces the inflammatory and genotoxic response in A549 and THP-1a cells, and these in vitro models show comparable toxicity to what seen in previous mouse studies with the same materials.

In vitro-in vivo correlations of pulmonary inflammogenicity and genotoxicity of MWCNT

Background

Multi-walled carbon nanotubes (MWCNT) have received attention due to extraordinary properties, resulting in concerns for occupational health and safety. Costs and ethical concerns of animal testing drive a need for in vitro models with predictive power in respiratory toxicity. The aim of this study was to assess pro-inflammatory response (Interleukin-8 expression, IL-8) and genotoxicity (DNA strand breaks) caused by MWCNT with different physicochemical properties in different pulmonary cell models and correlate these to previously published in vivo data. Seven MWCNT were selected; two long/thick (NRCWE-006/Mitsui-7 and NM-401), two short/thin (NM-400 and NM-403), a pristine (NRCWE-040) and two surface modified; hydroxylated (NRCWE-041) and carboxylated (NRCWE-042). Carbon black Printex90 (CB) was included as benchmark material. Human alveolar epithelial cells (A549) and monocyte-derived macrophages (THP-1a) were exposed to nanomaterials (NM) in submerged conditions, and two materials (NM-400 and NM-401) in co-cultures of A549/THP-1a and lung fibroblasts (WI-38) in an air-liquid interface (ALI) system. Effective doses were quantified by thermo-gravimetric-mass spectrometry analysis (TGA-MS). To compare genotoxicity in vitro and in vivo, we developed a scoring system based on a categorization of effects into standard deviation (SD) units (< 1, 1, 2, 3 or 4 standard deviation increases) for the increasing genotoxicity.

Results

Effective doses were shown to be 25 to 53%, and 21 to 57% of the doses administered to A549 and THP-1a, respectively. In submerged conditions (A549 and THP-1a cells), all NM induced dose-dependent IL-8 expression. NM-401 and NRCWE-006 caused the strongest pro-inflammatory response. In the ALI-exposed co-culture, only NM-401 caused increased IL-8 expression, and no DNA strand breaks were observed. Strong correlations were found between in vitro and in vivo inflammation when doses were normalized by surface area (also proxy for diameter and length). Significantly increased DNA damage was found for all MWCNT in THP-1a cells, and for short MWCNT in A549 cells. A concordance in genotoxicity of 83% was obtained between THP-1a cells and broncho-alveolar lavaged (BAL) cells.

Conclusion

This study shows correlations of pro-inflammatory potential in A549 and THP-1a cells with neutrophil influx in mice, and concordance in genotoxic response between THP-1a cells and BAL cells, for seven MWCNT.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-021-00413-2.

Genotoxicity of multi-walled carbon nanotube reference materials in mammalian cells and animals

Carbon nanotubes (CNTs) were the first nanomaterials to be evaluated by the International Agency for Research on Cancer (IARC). The categorization as possibly carcinogenic agent to humans was only applicable to multi-walled carbon nanotubes called MWCNT-7. Other types of CNTs were not classifiable because of missing data and it was not possible to pinpoint unique CNT characteristics that cause cancer. Importantly, the European Commission's Joint Research Centre (JRC) has established a repository of industrially manufactured nanomaterials that encompasses at least four well-characterized MWCNTs called NM-400 to NM-403 (original JRC code). This review summarizes the genotoxic effects of these JRC materials and MWCNT-7. The review consists of 36 publications with results on cell culture experiments (22 publications), animal models (9 publications) or both (5 publications). As compared to the publications in the IARC monograph on CNTs, the current database represents a significant increase as there is only an overlap of 8 publications. However, the results come mainly from cell cultures and/or measurements of DNA strand breaks by the comet assay and the micronucleus assay (82 out of 97 outcomes). A meta-analysis of cell culture studies on DNA strand breaks showed a genotoxic response by MWCNT-7, less consistent effect by NM-400 and NM-402, and least consistent effect by NM-401 and NM-403. Results from other in vitro tests indicate strongest evidence of genotoxicity for MWCNT-7. There are too few observations from animal models and humans to make general conclusions about genotoxicity.

Reactive oxygen species production, genotoxicity and telomere length in FE1-Muta™Mouse lung epithelial cells exposed to carbon nanotubes

Carbon nanotubes (CNTs) are fiber-like nanomaterials, which are used in various applications with possible exposure to humans. The genotoxicity and carcinogenic potential of CNTs remain to be fully understood. This study assessed the genotoxicity of three different multi-walled carbon nanotubes (MWCNTs) (MWCNT-7, NM-401 and NM-403) and one single-walled carbon nanotube (SWCNT) (NM-411) in FE1-Muta™Mouse lung epithelial (MML) cells using the alkaline comet assay. With the 2',7'-dichlorodihydrofluorescein diacetate fluorescent probe, we assessed the effect of CNT-exposure on the intracellular production of reactive oxygen species (ROS). We measured the effect of a 10-week CNT exposure on telomere length using quantitative PCR. Two of the included MWCNTs (NM-401 and MWCNT-7) and the SWCNT (NM-411) caused a significant increase in the level of DNA damage at concentrations up to 40 µg/ml (all concentrations pooled, p < 0.05), but no concentration-response relationships were found. All of the CNTs caused an increase in intracellular ROS production compared to unexposed cells (p_trend < 0.05). Results from the long-term exposure showed longer telomere length in cells exposed to MWCNTs compared to unexposed cells (p < 0.01). In conclusion, our results indicated that the included CNTs cause ROS production and DNA strand breaks in FE1-MML cells. Moreover, the MWCNTs, but not the SWCNT, had an impact on telomere length in a long-term exposure scenario.

Organomodified nanoclays induce less inflammation, acute phase response, and genotoxicity than pristine nanoclays in mice lungs

Surface modification by different quaternary ammonium compounds (QAC) makes nanoclays more compatible with various polymeric matrices, thereby expanding their potential applications. The growing industrial use of nanoclays could potentially pose a health risk for workers. Here, we assessed how surface modification of nanoclays modulates their pulmonary toxicity. An in vitro screening of the unmodified nanoclay Bentonite (montmorillonite) and four organomodified nanoclays (ONC); coated with various QAC, including benzalkonium chloride (BAC), guided the selection of the materials for the in vivo study. Mice were exposed via a single intratracheal instillation to 18, 54, and 162 µg of unmodified Bentonite or dialkyldimethyl-ammonium-coated ONC (NanofilSE3000), or to 6, 18, and 54 µg of a BAC-coated ONC (Nanofil9), and followed for one, 3, or 28 days. All materials induced dose- and time-dependent responses in the exposed mice. However, all doses of Bentonite induced larger, but reversible, inflammation (BAL neutrophils) and acute phase response (Saa3 gene expression in lung) than the two ONC. Similarly, highest levels of DNA strand breaks were found in BAL cells of mice exposed to Bentonite 1 day post-exposure. A significant increase of DNA strand breaks was detected also for NanofilSE3000, 3 days post-exposure. Only mice exposed to Bentonite showed increased Tgf-β gene expression in lung, biomarker of pro-fibrotic processes and hepatic extravasation, 3 days post-exposure. This study indicates that Bentonite treatment with some QAC changes main physical-chemical properties, including shape and surface area, and may decrease their pulmonary toxicity in exposed mice.