Special-Oriented Annealing-Twins-Induced Orange Peel Morphology of Heat Pipe under Bending Deformation

The thin-wall heat pipe is an efficient heat transfer component that has been widely used in the field of heat dissipation of high-power electronic equipment in recent years. In this study, the orange peel morphology defect of thin-wall heat pipes after bending deformation was analyzed both for the macro-3D profile and for the micro-formation mechanism. The morphology and crystal orientations of the grains and annealing twins were carefully characterized utilizing optical metallography and the electron backscatter diffraction technique. The results show that after high-temperature sintering treatment, the matrix grains of the heat pipe are seriously coarsened and form a strong Goss texture, while certain annealing twins with the unique copper orientation are retained. The distribution of the Schmid factor value subjected to the uniaxial stress indicates that inhomogeneity in the intergranular deformation exists among the annealing twins and matrix grains. The annealing twin exhibits a "hard-oriented" component during the deformation; thus, it plays a role as a barrier and hinders the slipping of dislocation. As the strain accumulates, part of the annealing twins may protrude from the surface of the heat pipe, forming a large-scale fluctuation of the surface as the so-called "orange peel" morphology. The 3D profile shows the bulged twins mostly perpendicular to the drawing direction, about 200-300 in width and 10-20 μm in height.

A Novel Hydroforming Process by Combining Internal and External Pressures for High-Strength Steel Wheel Rims

As one of the key safety components in motor vehicles, the steel wheel rim is commonly fabricated with the roll forming process. However, due to the varied cross-sections of the rim and the low formability of high-strength steel, it is difficult to produce thin-wall and defect-free wheel rims to realize the purpose of light weight. To solve these problems, a novel hydroforming process by combining internal and external pressures (HIEP) was proposed to produce thin-wall wheel rims in the current study. The designed initial tube with diameter between the maximum and minimum diameter of the wheel rim ensures dispersed deformation and effectively avoids local excessive thinning. During HIEP, a hydroforming process was performed with two successive stages: the external pressure and internal pressure stages. Theoretical analysis and finite element method (FEM) were jointly used to investigate the effect of process parameters on the wrinkling and thinning. With the optimized parameters for internal and external pressure, the wrinkling of wheel rims is prevented under compressive state during the external pressure forming stage. Additionally, HIEP was experimentally carried out with high-strength steel rims of 650 MPa ultimate tensile strength (UTS). Finally, wheel rims with weight reduction of 13% were produced successfully, which shows a uniform thickness distribution with a local maximum thinning ratio of 11.4%.

Deformation Characteristics, Formability and Springback Control of Titanium Alloy Sheet at Room Temperature: A Review

Titanium alloy sheets present inferior formability and severe springback in conventional forming processes at room temperature which greatly restrict their applications in complex-shaped components. In this paper, deformation characteristics and formability and springback behaviors of titanium alloy sheet at room temperature are systematically reviewed. Firstly, deformation characteristics of titanium alloys at room temperature are discussed, and formability improvement under high-rate forming and other methods are summarized, especially the impacting hydroforming developed by us. Then, the main advances in springback prediction and control are outlined, including the advanced constitutive models as well as the optimization of processing paths and parameters. More importantly, notable springback reduction is observed with high strain rate forming methods. Finally, potential investigation prospects for the precise forming of titanium alloy sheet in the future are suggested.

The RHOX homeobox gene cluster is selectively expressed in human oocytes and male germ cells

STUDY QUESTION

What human tissues and cell types express the X-linked reproductive homeobox (RHOX) gene cluster?

SUMMARY ANSWER

The RHOX homeobox genes and proteins are selectively expressed in germ cells in both the ovary and testis.

WHAT IS KNOWN ALREADY

The RHOX homeobox transcription factors are encoded by an X-linked gene cluster whose members are selectively expressed in the male and female reproductive tract of mice and rats. The Rhox genes have undergone strong selection pressure to rapidly evolve, making it uncertain whether they maintain their reproductive tissue-centric expression pattern in humans, an issue we address in this report.

STUDY DESIGN, SIZE, DURATION

We examined the expression of all members of the human RHOX gene cluster in 11 fetal and 8 adult tissues. The focus of our analysis was on fetal testes, where we evaluated 16 different samples from 8 to 20 weeks gestation. We also analyzed fixed sections from fetal testes, adult testes and adult ovaries to determine the cell type-specific expression pattern of the proteins encoded by RHOX genes.

PARTICIPANTS/MATERIALS, SETTING, METHODS

We used quantitative reverse transcription-polymerase chain reaction analysis to assay human RHOX gene expression. We generated antisera against RHOX proteins and used them for western blotting, immunohistochemical and immunofluorescence analyses of RHOXF1 and RHOXF2/2B protein expression.

MAIN RESULTS AND THE ROLE OF CHANCE

We found that the RHOXF1 and RHOXF2/2B genes are highly expressed in the testis and exhibit low or undetectable expression in most other organs. Using RHOXF1- and RHOXF2/2B-specific antiserum, we found that both RHOXF1 and RHOXF2/2B are primarily expressed in germ cells in the adult testis. Early stage germ cells (spermatogonia and early spermatocytes) express RHOXF2/2B, while later stage germ cells (pachytene spermatocytes and round spermatids) express RHOXF1. Both RHOXF1 and RHOXF2/2B are expressed in prespermatogonia in human fetal testes. Consistent with this, RHOXF1 and RHOXF2/2B mRNA expression increases in the second trimester during fetal testes development when gonocytes differentiate into prespermatogonia. In the human adult ovary, we found that RHOXF1 and RHOXF2/2B are primarily expressed in oocytes.

LIMITATIONS, REASONS FOR CAUTION

While the average level of expression of RHOX genes was low or undetectable in all 19 human tissues other than testes, it is still possible that RHOX genes are highly expressed in a small subset of cells in some of these non-testicular tissues. As a case in point, we found that RHOX proteins are highly expressed in oocytes within the human ovary, despite low levels of RHOX mRNA in the whole ovary.

WIDER IMPLICATIONS OF THE FINDINGS

The cell type-specific and developmentally regulated expression pattern of the RHOX transcription factors suggests that they perform regulatory functions during human fetal germ cell development, spermatogenesis and oogenesis. Our results also raise the possibility that modulation of RHOX gene levels could correct some cases of human infertility and that their encoded proteins are candidate targets for contraceptive drug design.

Distal trisomy of 10q with distal monosomy of 15q due to a paternal translocation

Distal trisomy of 10q is a rare chromosomal abnormality. Distal deletions of the terminal long arm of chromosome 15 have rarely been described. We report on a male infant with low birth weight and microcephaly, a flat face with a spacious forehead, low-set ears, blepharophimosis, microphthalmia, a small nose, and a depressed nasal bridge. Microarray comparative genomic hybridization identified that he had the karyotype 46, XY, der (15) t (10;15) (q25.2;q26.2) pat, with chromosomal breakpoints at 10q25.2 and 15q26.2. This male neonatal case had an unbalanced translocation inherited from his father who was a balanced carrier with the karyotype 46, XY, t (10;15) (q25;q26). The neonate had a partial trisomy of the long arm of chromosome 10 with a partial monosomy of distal 15q. The clinical features were in agreement with previous descriptions and allowed us to propose a growth retardation phenotype for this neonate case.

Effects of high pressure on the luminescent properties of nanocrystalline and bulk Y2O3:Eu3+

High pressure-induced spectral changes in a 20-nm cubic nanocrystalline yttria doped with europium and its corresponding bulk were studied in the range of 550-750 nm, corresponding to the 5D0 --> 7Fd (J = 0-4) transitions. The results demonstrate that the bulk Y2O3 underwent phase transition from the cubic phase to the monoclinic phase as the pressure increased to 15 GPa, while the 20-nm nanocrystals did not. This can be concluded from the fact that the 5D0 --> 7F0 line and the three 5D0 --> 7F1 sublines originating from the cubic phase disappeared, while another group of 5D0 --> 7F0 and 5D0 --> 7F1 lines appeared. In addition, the relative intensity of the peak around 630 nm to that around 611 nm varied obviously as the pressure surpassed 15 GPa. The variations in the nanocrystals were more sluggish in comparison to those in the bulk, indicating that the nanocrystalline yttria had improved compressibility, which is attributed to an increased surface energy in nanocrystals. The local environment surrounding luminescent Eu3+ in the nanocrystals and the bulk both became more disordered with the increase of the pressure. The phase transition from the cubic to the monoclinic is irreversible.

Recombinant enterokinase light chain with affinity tag: expression from Saccharomyces cerevisiae and its utilities in fusion protein technology

Enterokinase and recombinant enterokinase light chain (rEK(L)) have been used widely to cleave fusion proteins with the target sequence of (Asp)(4)-Lys. In this work, we show that their utility as a site-specific cleavage agent is compromised by sporadic cleavage at other sites, albeit at low levels. Further degradation of the fusion protein in cleavage reaction is due to an intrinsic broad specificity of the enzyme rather than to the presence of contaminating proteases. To offer facilitated purification from fermentation broth and efficient removal of rEK(L) after cleavage reaction, thus minimizing unwanted cleavage of target protein, histidine affinity tag was introduced into rEK(L). Utilizing the secretion enhancer peptide derived from the human interleukin 1 beta, the recombinant EK(L) was expressed in Saccharomyces cerevisiae and efficiently secreted into culture medium. The C-terminal His-tagged EK(L) was purified in a single-step procedure on nickel affinity chromatography. It retained full enzymatic activity similar to that of EK(L), whereas the N-terminal His-tagged EK(L) was neither efficiently purified nor had any enzymatic activity. After cleavage reaction of fusion protein, the C-terminal His-tagged EK(L) was efficiently removed from the reaction mixture by a single passage through nickel-NTA spin column. The simple affinity tag renders rEK(L) extremely useful for purification, post-cleavage removal, recovery, and recycling and will broaden the utility and the versatility of the enterokinase for the production of recombinant proteins.

A case of persistent endometriosis after total hysterectomy with both salpingo-oophorectomy managed by radiation therapy

Persistent endometriosis after total hysterectomy and both salpingo-oophorectomy (TH with BSO) is a rare condition and the etiology is uncertain. The exact incidence of persistent endometriosis after definitive surgery is not known. In addition, the treatment of persistent endometriosis after complete surgical excision is controversial. We report a case of persistent endometriosis with vaginal and sigmoid-colonic invasion after TH with BSO. The lesions were not responsive to hormonal therapy. The patient was managed successfully by therapeutic pelvic radiation.

Age estimation using a modified HPLC determination of ratio of aspartic acid in dentin

Diastereomeric dipeptides were derived from the amino acid enantiomers in dentin by O-phthalaldehyde-N-acetyl-L-cysteine. The products were separated using high performance liquid chromatography (HPLC) and detected by fluorescence detector. A short analysis time (total analysis time was 15 min, including retention time, sample derivatization time and column regeneration time) was used. The sensitivity of detection was 1 pmol and high resolution (Rs = 1.5) was reached. We determined the D/L ratio of aspartic acid in dentin of 28 first premolars. The correlation value between the D/L ratio of aspartic acid and actual age was 0.9887; errors of +/- 1 year accounted for 46.4%, and no error exceeded 5 years.

Studies on the crystal structure of [L-Met]B0 bovine insulin at 3.0A resolution

Based on the crystal symmetry of [L-Met]B0 bovine insulin (LMBBI) and the fundamental theory of the molecular packing method, the scheme for the determination of the position and orientation of the molecules by only using one-dimensional rotation and one-dimensional translation was chosen to be used, and therefore the calculation of the rotation function of the molecular replacement method and the refinement of the rotational and translational parameters by using the R-factor search method were simplified greatly. After the preliminary refinement by using the macromolecular rigid body refinement technique, the molecular model was further refined and adjusted by using the energy-minimizing stereochemical-restrained least squares refinement technique assisted by the manual revision on the difference Fourier maps. The L-Met residues on the N-terminus of the B-chain appeared clearly on the final electron density map.

Sex diagnosis of Chinese skulls using multiple stepwise discriminant function analysis

Sixty Chinese skulls (30 males and 30 females) from Liaoning Province of the People's Republic of China were used in this study. Forty-one variables on each skull were measured and one group of 14 and a second group of 5 variables were selected from all the variables by applying multiple stepwise regression on a computer. Discriminant equations for the 14 and 5 variables for sex diagnosis have been obtained and these variables are highly significant. The discriminant rate for the group of 5 variables resulted in accurate sex determination in 96.7% of cases. For the group of 14 variables there was 100% success rate.