Size fractionation of bioaerosol emissions from green-waste composting

Particle size is a significant factor in determining the dispersal and inhalation risk from bioaerosols. Green-waste composting is a significant source of bioaerosols (including pathogens), but little is known about the distribution of specific taxa across size fractions. To characterise size fractionated bioaerosol emissions from a compost facility, we used a Spectral Intensity Bioaerosol Sensor (SIBS) to quantify total bioaerosols and qPCR and metabarcoding to quantify microbial bioaerosols. Overall, sub-micron bioaerosols predominated, but molecular analysis showed that most (>75%) of the airborne microorganisms were associated with the larger size fractions (>3.3 µm d_a). The microbial taxa varied significantly by size, with Bacilli dominating the larger, and Actinobacteria the smaller, size fractions. The human pathogen Aspergillus fumigatus dominated the intermediate size fractions (>50% d_a 1.1-4.7 µm), indicating that it has the potential to disperse widely and once inhaled may penetrate deep into the respiratory system. The abundance of Actinobacteria (>60% at d_a < 2.1 µm) and other sub-micron bioaerosols suggest that the main health effects from composting bioaerosols may come from allergenic respiratory sensitisation rather than directly via infection. These results emphasise the need to better understand the size distributions of bioaerosols across all taxa in order to model their dispersal and to inform risk assessments of human health related to composting facilities.

Bioaerosols in the Athens Metro: Metagenetic insights into the PM10 microbiome in a naturally ventilated subway station

To date, few studies have examined the aerosol microbial content in Metro transportation systems. Here we characterised the aerosol microbial abundance, diversity and composition in the Athens underground railway system. PM₁₀ filter samples were collected from the naturally ventilated Athens Metro Line 3 station "Nomismatokopio". Quantitative PCR of the 16S rRNA gene and high throughput amplicon sequencing of the 16S rRNA gene and internal transcribed spacer (ITS) region was performed on DNA extracted from PM₁₀ samples. Results showed that, despite the bacterial abundance (mean = 2.82 × 10⁵ 16S rRNA genes/m³ of air) being, on average, higher during day-time and weekdays, compared to night-time and weekends, respectively, the differences were not statistically significant. The average PM₁₀ mass concentration on the platform was 107 μg/m³. However, there was no significant correlation between 16S rRNA gene abundance and overall PM₁₀ levels. The Athens Metro air microbiome was mostly dominated by bacterial and fungal taxa of environmental origin (e.g. Paracoccus, Sphingomonas, Cladosporium, Mycosphaerella, Antrodia) with a lower contribution of human commensal bacteria (e.g. Corynebacterium, Staphylococcus). This study highlights the importance of both outdoor air and commuters as sources in shaping aerosol microbial communities. To our knowledge, this is the first study to characterise the mycobiome diversity in the air of a Metro environment based on amplicon sequencing of the ITS region. In conclusion, this study presents the first microbial characterisation of PM₁₀ in the Athens Metro, contributing to the growing body of microbiome exploration within urban transit networks. Moreover, this study shows the vulnerability of public transport to airborne disease transmission.

Fingerprinting ambient air to understand bioaerosol profiles in three different environments in the south east of England

Molecular and chemical fingerprints from 10 contrasting outdoor air environments, including three agricultural farms, three urban parks and four industrial sites were investigated to advance our understanding of bioaerosol distribution and emissions. Both phospholipid fatty acids (PLFA) and microbial volatile organic compounds (MVOC) profiles showed a different distribution in summer compared to winter. Further to this, a strong positive correlation was found between the total concentration of MVOCs and PLFAs (r = 0.670, p = 0.004 in winter and r = 0.767, p = 0.001 in summer) demonstrating that either chemical or molecular fingerprints of outdoor environments can provide good insights into the sources and distribution of bioaerosols. Environment specific variables and most representative MVOCs were identified and linked to microbial species emissions via a MVOC database and PLFAs taxonomical classification. While similar MVOCs and PLFAs were identified across all the environments suggesting common microbial communities, specific MVOCs were identified for each contrasting environment. Specifically, 3,4-dimethylpent-1-yn-3-ol, ethoxyethane and propanal were identified as key MVOCs for the industrial areas (and were correlated to fungi, Staphylococcus aureus (Gram positive bacteria) and Gram negative bacteria, R = 0.863, R = 0.618 and R = 0.676, respectively) while phthalic acid, propene and isobutane were key for urban environments (correlated to Gram negative bacteria, fungi and bacteria, R = 0.874, R = 0.962 and R = 0.969 respectively); and ethanol, 2-methyl-2-propanol, 2-methyl-1-pentene, butane, isoprene and methyl acetate were key for farms (correlated to fungi, Gram positive bacteria and bacteria, R = 0.690 and 0.783, R = 0.706 and R = 0.790, 0.761 and 0.768). The combination of MVOCs and PLFAs markers can assist in rapid microbial fingerprinting of distinct environmental influences on ambient air quality.

Effective killing of bacteria under blue-light irradiation promoted by green synthesized silver nanoparticles loaded on reduced graphene oxide sheets

Graphene oxide (GO) materials loaded with silver nanoparticles (AgNPs) have drawn considerable attention due to their capacity to efficiently inactivate bacteria though a multifaceted mechanism of action, as well as for presenting a synergetic effect against bacteria when compared to the activity of AgNPs and GO alone. In this investigation, we present an inexpensive and environmentally-friendly method for synthesizing reduced GO sheets coated with silver nanoparticles (AgNPs/r-GO) using a coffee extract solution as a green reducing agent. The physical and chemical properties of the produced materials were extensively characterized by scanning electron microscopy (SEM), field-emission gun transmission electron microscopy (FEG-TEM), ultraviolet and visible absorption (UV-Vis), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma-optical emission spectroscopy (ICP-OES) and ion release determination. The results demonstrated that AgNPs/r-GO composites were successfully produced, revealing the formation of micrometer-sized r-GO sheets decorated by AgNPs of approximately 70 nm diameter. Finally, bactericidal and photobactericidal effects of the AgNPs/r-GO composites were tested against Staphylococcus aureus, in which the results showed that the composites presented antimicrobial and photoantimicrobial activities. Moreover, our results demonstrated for the first time, to our knowledge, that an efficient process of bacterial inactivation can be achieved by using AgNPs/r-GO composites under blue light irradiation as a result of three different bacterial killing processes: (i) chemical effect promoted by Ag⁺ ion release from AgNPs; (ii) photocatalytic activity induced by AgNPs/r-GO composites, enhancing the bacterial photoinactivation due to the excited-Plasmons of the AgNPs when anchored on r-GO; and (iii) photodynamic effect produced by bacterial endogenous photosensitizers under blue-light irradiation. In summary, the present findings demonstrated that AgNPs/r-GO can be obtained by a non-toxic procedure with great potential for biomedical-related applications.

Phytotoxicity of silver nanoparticles on Vicia faba: Evaluation of particle size effects on photosynthetic performance and leaf gas exchange

Nanotechnology is an emerging field in science and engineering, which presents significant impacts on the economy, society and the environment. The nanomaterials' (NMs) production, use, and disposal is inevitably leading to their release into the environment where there are uncertainties about its fate, behaviour, and toxicity. Recent works have demonstrated that NMs can penetrate, translocate, and accumulate in plants. However, studies about the effects of the NMs on plants are still limited because most investigations are carried out in the initial stage of plant development. The present study aimed to evaluate and characterize the photochemical efficiency of photosystem II (PSII) of broad bean (Vicia faba) leaves when subjected to silver nanoparticles (AgNPs) with diameters of 20, 51, and 73 nm as well as to micrometer-size Ag particles (AgBulk). The AgNPs were characterized by transmission electron microscopy and dynamic light scattering. The analyses were performed by injecting the leaves with 100 mg L^-1 aqueous solution of Ag and measuring the chlorophyll fluorescence imaging, gas exchange, thermal imaging, and reactive oxygen species (ROS) production. In addition, silver ion (Ag⁺) release from Ag particles was determined by dialysis. The results revealed that AgNPs induce a decrease in the photochemical efficiency of photosystem II (PSII) and an increase in the non-photochemical quenching. The data also revealed that AgNPs affected the stomatal conductance (g_s) and CO₂ assimilation. Further, AgNPs induced an overproduction of ROS in Vicia faba leaves. Finally, all observed effects were particle diameter-dependent, increasing with the reduction of AgNPs diameter and revealing that AgBulk caused only a small or no changes on plants. In summary, the results point out that AgNPs may negatively affect the photosynthesis process when accumulated in the leaves, and that the NPs themselves were mainly responsible since negligible Ag⁺ release was detected.

Biological Particles in the Indoor Environment

Airborne microorganisms are very difficult to assess accurately under field conditions owing to differences in the sample collection efficiency of the selected sampler and variations in DNA extraction efficiencies. Consequently, bioaerosol abundance and biodiversity can be underestimated, making it more difficult to link specific bioaerosol components to diseases and human health risk. Owing to the low biomass in air samples, it remains a challenge to obtain a representative microbiological sample to recover sufficient DNA for downstream analyses. Improved sampling methods are particularly crucial, especially for investigating viral communities, owing to the extremely low biomass of viral particles in the air compared with other environments. Without detailed information about sampling, characterization and enumeration techniques, interpretation of exposure level is very difficult. Despite this, bioaerosol research has been enhanced by molecular tools, especially next-generation sequencing approaches that have allowed faster and more detailed characterization of air samples.

Bioaerosol biomonitoring: Sampling optimization for molecular microbial ecology

Bioaerosols (or biogenic aerosols) have largely been overlooked by molecular ecologists. However, this is rapidly changing as bioaerosols play key roles in public health, environmental chemistry and the dispersal ecology of microbes. Due to the low environmental concentrations of bioaerosols, collecting sufficient biomass for molecular methods is challenging. Currently, no standardized methods for bioaerosol collection for molecular ecology research exist. Each study requires a process of optimization, which greatly slows the advance of bioaerosol science. Here, we evaluated air filtration and liquid impingement for bioaerosol sampling across a range of environmental conditions. We also investigated the effect of sampling matrices, sample concentration strategies and sampling duration on DNA yield. Air filtration using polycarbonate filters gave the highest recovery, but due to the faster sampling rates possible with impingement, we recommend this method for fine -scale temporal/spatial ecological studies. To prevent bias for the recovery of Gram-positive bacteria, we found that the matrix for impingement should be phosphate-buffered saline. The optimal method for bioaerosol concentration from the liquid matrix was centrifugation. However, we also present a method using syringe filters for rapid in-field recovery of bioaerosols from impingement samples, without compromising microbial diversity for high -throughput sequencing approaches. Finally, we provide a resource that enables molecular ecologists to select the most appropriate sampling strategy for their specific research question.

Airborne ultrafine particles in a naturally ventilated metro station: Dominant sources and mixing state determined by particle size distribution and volatility measurements

Ultrafine particle number concentrations and size distributions were measured on the platform of a metro station in Athens, Greece, and compared with those recorded at an urban background station. The volatility of the sampled particles was measured in parallel, providing further insights on the mixing state and composition of the sampled particles. Particle concentration exhibited a mean value of 1.2 × 10⁴ # cm^-3 and showed a weak correlation with train passage frequency, but exhibited a strong correlation with urban background particle concentrations. The size distribution appears to be strongly influenced by outdoor conditions, such as the morning traffic rush hour and new particle formation events observed at noon. The aerosol in the metro was externally mixed throughout the day, with particle populations being identified (1) as fully refractory particles being more dominant during the morning traffic rush hours, (2) as core-shell structure particles having a non-volatile core coated with volatile material, and (3) fully volatile particles. The evolution of particle volatility and size throughout the day provide additional support that most nanoparticles in the metro station originate from outdoor urban air.

Can chemical and molecular biomarkers help discriminate between industrial, rural and urban environments?

Air samples from four contrasting outdoor environments including a park, an arable farm, a waste water treatment plant and a composting facility were analysed during the summer and winter months. The aim of the research was to study the feasibility of differentiating microbial communities from urban, rural and industrial areas between seasons with chemical and molecular markers such as microbial volatile organic compounds (MVOCs) and phospholipid fatty acids (PLFAs). Air samples (3l) were collected every 2h for a total of 6h in order to assess the temporal variations of MVOCs and PLFAs along the day. MVOCs and VOCs concentrations varied over the day, especially in the composting facility which was the site where more human activities were carried out. At this site, total VOC concentration varied between 80 and 170μgm^-3 in summer and 20-250μgm^-3 in winter. The composition of MVOCs varied between sites due to the different biological substrates including crops, waste water, green waste or grass. MVOCs composition also differed between seasons as in summer they are more likely to get modified by oxidation processes in the atmosphere and in winter by reduction processes. The composition of microbial communities identified by the analysis of PLFAs also varied among the different locations and between seasons. The location with higher concentrations of PLFAs in summer was the farm (7297ngm^-3) and in winter the park (11,724ngm^-3). A specific set of MVOCs and PLFAs that most represent each one of the locations was identified by principal component analyses (PCA) and canonical analyses. Further to this, concentrations of both total VOCs and PLFAs were at least three times higher in winter than in summer. The difference in concentrations between summer and winter suggest that seasonal variations should be considered when assessing the risk of exposure to these compounds.

Quenching of chlorophyll fluorescence induced by silver nanoparticles

The interaction between chlorophyll (Chl) and silver nanoparticles (AgNPs) was evaluated by analyzing the optical behavior of Chl molecules surrounded by different concentrations of AgNPs (10, 60, and 100nm of diameter). UV-Vis absorption, steady state and time-resolved fluorescence measurements were performed for Chl in the presence and absence of these nanoparticles. AgNPs strongly suppressed the Chl fluorescence intensity at 678nm. The Stern-Volmer constant (KSV) showed that fluorescence suppression is driven by the dynamic quenching process. In particular, KSV was nanoparticle size-dependent with an exponential decrease as a function of the nanoparticle diameter. Finally, changes in the Chl fluorescence lifetime in the presence of nanoparticles demonstrated that the fluorescence quenching may be induced by the excited electron transfer from the Chl molecules to the metal nanoparticles.

Airborne biological hazards and urban transport infrastructure: current challenges and future directions

Exposure to airborne biological hazards in an ever expanding urban transport infrastructure and highly diverse mobile population is of growing concern, in terms of both public health and biosecurity. The existing policies and practices on design, construction and operation of these infrastructures may have severe implications for airborne disease transmission, particularly, in the event of a pandemic or intentional release of biological of agents. This paper reviews existing knowledge on airborne disease transmission in different modes of transport, highlights the factors enhancing the vulnerability of transport infrastructures to airborne disease transmission, discusses the potential protection measures and identifies the research gaps in order to build a bioresilient transport infrastructure. The unification of security and public health research, inclusion of public health security concepts at the design and planning phase, and a holistic system approach involving all the stakeholders over the life cycle of transport infrastructure hold the key to mitigate the challenges posed by biological hazards in the twenty-first century transport infrastructure.

Engineered silver nanoparticles are sensed at the plasma membrane and dramatically modify the physiology of Arabidopsis thaliana plants

Silver nanoparticles (Ag NPs) are the world's most important nanomaterial and nanotoxicant. The aim of this study was to determine the early stages of interactions between Ag NPs and plant cells, and to investigate their physiological roles. We have shown that the addition of Ag NPs to cultivation medium, at levels above 300 mg L(-1) , inhibited Arabidopsis thaliana root elongation and leaf expansion. This also resulted in decreased photosynthetic efficiency and the extreme accumulation of Ag in tissues. Acute application of Ag NPs induced a transient elevation of [Ca(2+) ]cyt and the accumulation of reactive oxygen species (ROS; partially generated by NADPH oxidase). Whole-cell patch-clamp measurements on root cell protoplasts demonstrated that Ag NPs slightly inhibited plasma membrane K(+) efflux and Ca(2+) influx currents, or caused membrane breakdown; however, in excised outside-out patches, Ag NPs activated Gd(3+) -sensitive Ca(2+) influx channels with unitary conductance of approximately 56 pS. Bulk particles did not modify the plasma membrane currents. Tests with electron paramagnetic resonance spectroscopy showed that Ag NPs were not able to catalyse hydroxyl radical generation, but that they directly oxidized the major plant antioxidant, l-ascorbic acid. Overall, the data presented shed light on mechanisms of the impact of nanosilver on plant cells, and show that these include the induction of classical stress signalling reactions (mediated by [Ca(2+) ]cyt and ROS) and a specific effect on the plasma membrane conductance and the reduced ascorbate.

Effects of engineered silver nanoparticles on the growth and activity of ecologically important microbes

Currently, little is known about the impact of silver nanoparticles (AgNPs) on ecologically important microorganisms such as ammonia-oxidizing bacteria (AOB). We performed a multi-analytical approach to demonstrate the effects of uncapped nanosilver (uAgNP), capped nanosilver (cAgNP) and Ag2SO4 on the activities of the AOB: Nitrosomonas europaea, Nitrosospira multiformis and Nitrosococcus oceani, and the growth of Escherichia coli and Bacillus subtilis as model bacterial systems in relation to AgNP type and concentration. All Ag treatments caused significant inhibition to the nitrification potential rates (NPRs) of Nitrosomonas europaea (decreased from 34 to < 16.7 μM NH4+ oxidized day−1), Nitrosospira multiformis (decreased from 46 to < 24.8 μM NH4+ oxidized day−1) and Nitrosococcus oceani (decreased from 26 to < 18.4 μM NH4+ oxidized day−1). Escherichia coli-Ag interactions revealed that the percentage of damaged E. coli cells was 45% greater with Ag2SO4, 39% with cAgNPs and 33% with uAgNPs compared with controls. Generally, the inhibitory effect on AOB NPRs and E. coli/B. subtilis growth was in the following order Ag2SO4 > cAgNP > uAgNP. In conclusion, AgNPs (especially cAgNPs) and Ag2SO4 adversely affected AOB activities and thus have the potential to severely impact key microbially driven processes such as nitrification in the environment.

Particulate pollution in different housing types in a UK suburban location

To investigate the levels of particulate pollution in residential built environments measurements of PM(10), PM(2.5), and PM(1) and concentrations were made between 2004 and 2008 in various residencies in a UK suburban location. Measurements were carried out in three different residential settings (Types I, II and III). In type I non-smoking living rooms, the highest 24-hour mean concentrations were found in summer. When smoking took place in type I residences, the concentrations of PM(10), PM(2.5) and PM(1), during the winter were almost double those in summer. In type II houses the concentrations were higher in the houses with open plan kitchens than in those with separate kitchens. In type III houses, mean concentrations were significantly higher in wood heated living rooms than those using central heating. In kitchens, cooking resulted in substantially higher concentrations of particulate matter with levels above those in smoking living rooms in winter. The hourly maximum values of number concentration were considerably higher in smoking rooms than non-smoking ones. Cooking resulted in increased number concentrations, with the average hourly maximum concentration of 179,110 #/cm(3). Particle mass and number emission rates were determined for a number of activities. In kitchens grilling had the highest average number emission rate, followed by boiling and frying. The results clearly highlight the impact of different forms of dwelling and their use and management by occupants on the levels of particulate matter in naturally ventilated residential built environments.

Bioaerosols in residential micro-environments in low income countries: a case study from Pakistan

Our knowledge of the concentrations of bioaerosols in residential micro-environments in low income countries is scanty. The present investigation was conducted to assess the culturable concentration and size distribution of bacteria, gram negative bacteria and fungi in two rural and an urban site in Pakistan. The highest indoor culturable bacteria concentration was found at Rural Site II (14,650 CFU/m3) while the outdoor maximum occurred at the urban site (16,416 CFU/m3). With reference to fungi, both indoor and outdoor concentrations were considerably higher at Rural Site I than the other sites. The size distribution of culturable bacteria at all sites showed greater variability than that of culturable fungi. At all sites more than the half (55-93%) of the culturable bacterial and fungal counts were observed in the respirable fraction (<4.7 μm) and so had the potential to penetrate into lower respiratory system.

Nitrogen dioxide and household fuel use in the Pakistan

More than half the world's population use biomass fuels as a household energy source and, hence, face significant exposure to a number of air pollutants. In Pakistan about 90% of rural households and 22% of urban households use biomass fuels. In order to assess the levels of NO(2) in the residential micro-environment, two sampling campaigns were carried out at different times of the year (summer and winter) at an urban and two rural sites during 2005 and 2007. Rural site I used biomass fuels while natural gas was utilized at rural site II and the urban site. In winter NO(2) concentrations at all three sites were higher in the kitchens than living rooms and outdoors. ANOVA showed that, although, there was a significant difference among NO(2) concentrations in the kitchens, living rooms and courtyards, at all the three sites, there was no significant different between kitchens using biomass fuels and natural gas. During the summer NO(2) levels fell sharply at both rural sites (from 256 μg/m(3) and 242 μg/m(3) to 51 μg/m(3) and 81 μg/m(3)). However at the urban site the mean levels were slightly higher in summer (234 μg/m(3)) than in winter (218 μg/m(3)). The considerable seasonal variation at the rural sites was due to a shift of indoor kitchens to open outdoor kitchens at rural site I and more ventilation at rural site II during summer. There was no significant difference between kitchens using biomass (site I) or natural gas (site II), however the kitchens at rural site II and urban site showed a significant difference. Overall fuel selection showed no significant effect on NO(2) levels. However the NO(2) concentrations may pose a significant threat to the health of people, especially women and children.

The state of indoor air quality in Pakistan--a review

BACKGROUND AND PURPOSE

In Pakistan, almost 70% of the population lives in rural areas. Ninety-four percent of households in rural areas and 58% in urban areas depend on biomass fuels (wood, dung, and agricultural waste). These solid fuels have poor combustion efficiency. Due to incomplete combustion of the biomass fuels, the resulting smoke contains a range of health-deteriorating substances that, at varying concentrations, can pose a serious threat to human health. Indoor air pollution accounts for 28,000 deaths a year and 40 million cases of acute respiratory illness. It places a significant economic burden on Pakistan with an annual cost of 1% of GDP. Despite the mounting evidence of an association between indoor air pollution and ill health, policy makers have paid little attention to it. This review analyzes the existing information on levels of indoor air pollution in Pakistan and suggests suitable intervention methods.

METHODS

This review is focused on studies of indoor air pollution, due to biomass fuels, in Pakistan published in both scientific journals and by the Government and international organizations. In addition, the importance of environmental tobacco smoke as an indoor pollutant is highlighted.

RESULTS

Unlike many other developing countries, there are no long-term studies on the levels of indoor air pollution. The limited studies that have been undertaken indicate that indoor air pollution should be a public health concern. High levels of particulate matter and carbon monoxide have been reported, and generally, women and children are subject to the maximum exposure. There have been a few interventions, with improved stoves, in some areas since 1990. However, the effectiveness of these interventions has not been fully evaluated.

CONCLUSION

Indoor air pollution has a significant impact on the health of the population in Pakistan. The use of biomass fuel as an energy source is the biggest contributor to poor indoor air quality followed by smoking. In order to arrest the increasing levels of indoor pollution, there is a dire need to recognize it as a major health hazard and formulate a national policy to combat it. An integrated effort, with involvement of all stakeholders, could yield promising results. A countrywide public awareness campaign, on the association of indoor air pollution with ill health, followed by practical intervention would be an appropriate approach. Due to the current socioeconomic conditions in the country, development and adoption of improved cooking stoves for the population at large would be the most suitable choice. However, the potential of biogas as a fuel should be explored further, and modern fuels (natural gas and LPG) need to be accessible and economical. Smoking in closed public spaces should be banned, and knowledge of the effect of smoking on indoor air quality needs to be quantified.

Characteristics of indoor/outdoor particulate pollution in urban and rural residential environment of Pakistan

Particulate pollution has emerged as a serious environmental health concern in Pakistan. The use of biomass fuels in traditional stoves produces high levels of indoor air pollutants. In Pakistan, 94% of rural and 58% of urban households depend on biomass fuel. This study investigates variations in indoor/outdoor concentrations of particulate matter during various activities for three different micro-environments in Pakistan. At a rural site, the average indoor/outdoor ratios for PM(10), PM(2.5), and PM(1), in kitchens using biomass fuels were 3.80, 4.36, and 4.11, respectively. A large variation was recorded in the mass concentration of particulate matter during cooking with concentrations in the range 4000-8555 microg/m(3). In a living room at a rural site, the average indoor/outdoor ratios for PM(10), PM(2.5), and PM(1) were 1.74, 2.49, and 3.01, respectively. At the urban site, the average indoor/outdoor ratios for the same size fractions were 1.71, 2.88, and 3.47, respectively. Cooking, cleaning and smoking were identified as principal contributors to the high indoor levels of particulate matter. This study showed considerably high concentrations of particulate matter, particularly in kitchens using biomass fuels, as compared to living areas. Thus women and children face the greatest exposure due to the amount of time they spend in the kitchen.

PRACTICAL IMPLICATIONS

In the developing world, particulate air pollution, both indoor and outdoor, is a substantial health hazard to the public. The very high concentrations of particulate matter in both rural and urban sites, particularly in kitchens using biomass fuels, emphasize the severity of this issue in Pakistan. Women and children are extensively at risk due to amount of time spent in kitchens. This state of affairs calls for a large-scale intervention to reduce the exposure to indoor air pollution.

The state of ambient air quality in Pakistan--a review

BACKGROUND AND PURPOSE

Pakistan, during the last decade, has seen an extensive escalation in population growth, urbanization, and industrialization, together with a great increase in motorization and energy use. As a result, a substantial rise has taken place in the types and number of emission sources of various air pollutants. However, due to the lack of air quality management capabilities, the country is suffering from deterioration of air quality. Evidence from various governmental organizations and international bodies has indicated that air pollution is a significant risk to the environment, quality of life, and health of the population. The Government has taken positive steps toward air quality management in the form of the Pakistan Clean Air Program and has recently established a small number of continuous monitoring stations. However, ambient air quality standards have not yet been established. This paper reviews the data being available on the criteria air pollutants: particulate matter (PM), sulfur dioxide, ozone, carbon monoxide, nitrogen dioxide, and lead.

METHODS

Air pollution studies in Pakistan published in both scientific journals and by the Government have been reviewed and the reported concentrations of PM, SO(2), O(3), CO, NO(2), and Pb collated. A comparison of the levels of these air pollutants with the World Health Organization air quality guidelines was carried out.

RESULTS

Particulate matter was the most serious air pollutant in the country. NO(2) has emerged as the second high-risk pollutant. The reported levels of PM, SO(2), CO, NO(2), and Pb were many times higher than the World Health Organization air quality guidelines. Only O(3) concentrations were below the guidelines.

CONCLUSIONS

The current state of air quality calls for immediate action to tackle the poor air quality. The establishment of ambient air quality standards, an extension of the continuous monitoring sites, and the development of emission control strategies are essential.

Outdoor environments and human pathogens in air

Are pathogens in outdoor air a health issue at present or will they become a problem in the future? A working group called AirPath - Outdoor Environments and Human Pathogens in Air was set up in 2007 at University College London, UK with the aim of opening new discussion and creating a research network to investigate the science and impacts of outdoor pathogens. Our objective in this paper is to review and discuss the following areas: What is the source of human pathogens in outdoor air? What current, developing and future techniques do we need? Can we identify at-risk groups in relation to their activities and environments? How do we prepare for the anticipated challenges of environmental change and new and emerging diseases? And how can we control for and prevent pathogens in outdoor environments? We think that this work can benefit the wider research community and policy makers by providing a concise overview of various research aspects and considerations which may be important to their work.

Aerosols and environmental pollution

The number of publications on atmospheric aerosols has dramatically increased in recent years. This review, predominantly from a European perspective, summarizes the current state of knowledge of the role played by aerosols in environmental pollution and, in addition, highlights gaps in our current knowledge. Aerosol particles are ubiquitous in the Earth's atmosphere and are central to many environmental issues; ranging from the Earth's radiative budget to human health. Aerosol size distribution and chemical composition are crucial parameters that determine their dynamics in the atmosphere. Sources of aerosols are both anthropogenic and natural ranging from vehicular emissions to dust resuspension. Ambient concentrations of aerosols are elevated in urban areas with lower values at rural sites. A comprehensive understanding of aerosol ambient characteristics requires a combination of measurements and modeling tools. Legislation for ambient aerosols has been introduced at national and international levels aiming to protect human health and the environment.

Bipolar charged aerosol agglomeration and collection by a two-zone agglomerator

In older to collect fine particles more efficiently, a new-type electrostatic agglomerator with two zones was developed. The distinguishing feature of this electrostatic agglomerator is that the particles are bipolarly charged and coagulated in the same alternating electric field simultaneously. The silica flour with 2 microns mass median diameter and the smoke from burning wood powder were used as test aerosol. The comparison experimental results have shown that when the mean electric field is 4 kV/cm the collection efficiency of the new electrostatic agglomerator was 98.2% for silica flour and 67.4% for wood powder smoke. Under the same experimental condition, the collection efficiency of the electrostatic agglomerator with three zones was 97.4% for collecting silica flour and the collection efficiency of the electrostatic precipitator was 56.3% for wood powder smoke.

Optical and dynamical investigations of fractal clusters

The characterisation of particle shape has been an active research area and source of contention for over fifty years. In this paper we have reviewed the concept of fractal theory and its application to various aspects of industrial processes has been demonstrated. The application to environmental aerosols, especially those formed by combustion, has received much attention due to the increasing awareness of the global impact of aerosols on climate. Fractal analysis is a convenient framework for the description of complex morphologies and other dynamical parameters.