Digital Microfluidics─How Magnetically Driven Orientation of Pillars Influences Droplet Positioning

Interfaces between a water droplet and a network of pillars produce eventually superhydrophobic, self-cleaning properties. Considering the surface fraction of the surface in interaction with water, it is possible to tune precisely the contact angle hysteresis (CAH) to low values, which is at the origin of the poor adhesion of water droplets, inducing their high mobility on such a surface. However, if one wants to move and position a droplet, the lower the CAH, the less precise will be the positioning on the surface. While rigid surfaces limit the possibilities of actuation, smart surfaces have been devised with which a stimulus can be used to trigger the displacement of a droplet. Light, electron beam, mechanical stimulation like vibration, or magnetism can be used to induce a displacement of droplets on surfaces and transfer them from one position to the targeted one. Among these methods, only few are reversible, leading to anisotropy-controlled orientation of the structured interface with water. Magnetically driven superhydrophobic surfaces are the most promising reprogramming surfaces that can lead to the control of wettability and droplet guidance.

Synthesis of Fluorescent, Small, Stable and Non-Toxic Epitope-Imprinted Polymer Nanoparticles in Water

Molecularly imprinted polymers (MIPs) are really interesting for nanomedicine. To be suitable for such application, they need to be small, stable in aqueous media and sometimes fluorescent for bioimaging. We report herein, the facile synthesis of fluorescent, small (below 200 nm), water-soluble and water-stable MIP capable of specific and selective recognition of their target epitope (small part of a protein). To synthesize these materials, we used dithiocarbamate-based photoiniferter polymerization in water. The use of a rhodamine-based monomer makes the resulting polymers fluorescent. Isothermal titration calorimetry (ITC) is used to determine the affinity as well as the selectivity of the MIP for its imprinted epitope, according to the significant differences observed when comparing the binding enthalpy of the original epitope with that of other peptides. The toxicity of the nanoparticles is also tested in two breast cancer cell lines to show the possible use of these particle for future in vivo applications. The materials demonstrated a high specificity and selectivity for the imprinted epitope, with a K_d value comparable with the affinity values of antibodies. The synthesized MIP are not toxic, which makes them suitable for nanomedicine.

Ca2+ and Ag+ orient low-molecular weight amphiphile self-assembly into "nano-fishnet" fibrillar hydrogels with unusual β-sheet-like raft domains

Low-molecular weight gelators (LMWGs) are small molecules (M_w < ∼1 kDa), which form self-assembled fibrillar network (SAFiN) hydrogels in water when triggered by an external stimulus. A great majority of SAFiN gels involve an entangled network of self-assembled fibers, in analogy to a polymer in a good solvent. In some rare cases, a combination of attractive van der Waals and repulsive electrostatic forces drives the formation of bundles with a suprafibrillar hexagonal order. In this work, an unexpected micelle-to-fiber transition is triggered by Ca²⁺ or Ag⁺ ions added to a micellar solution of a novel glycolipid surfactant, whereas salt-induced fibrillation is not common for surfactants. The resulting SAFiN, which forms a hydrogel above 0.5 wt%, has a "nano-fishnet" structure, characterized by a fibrous network of both entangled fibers and β-sheet-like rafts, generally observed for silk fibroin, actin hydrogels or mineral imogolite nanotubes, but not known for SAFiNs. The β-sheet-like raft domains are characterized by a combination of cryo-TEM and SAXS and seem to contribute to the stability of glycolipid gels. Furthermore, glycolipid is obtained by fermentation from natural resources (glucose, rapeseed oil), thus showing that naturally engineered compounds can have unprecedented properties, when compared to the wide range of chemically derived amphiphiles.

Directional control of neurite outgrowth: emerging technologies for Parkinson's disease using magnetic nanoparticles and magnetic field gradients

A challenge in current stem cell therapies for Parkinson's disease (PD) is controlling neuronal outgrowth from the substantia nigra towards the targeted area where connectivity is required in the striatum. Here we present progress towards controlling directional neurite extensions through the application of iron-oxide magnetic nanoparticles (MNPs) labelled neuronal cells combined with a magnetic array generating large spatially variant field gradients (greater than 20 T m-1). We investigated the viability of this approach in both two-dimensional and organotypic brain slice models and validated the observed changes in neurite directionality using mathematical models. Results showed that MNP-labelled cells exhibited a shift in directional neurite outgrowth when cultured in a magnetic field gradient, which broadly agreed with mathematical modelling of the magnetic force gradients and predicted MNP force direction. We translated our approach to an ex vivo rat brain slice where we observed directional neurite outgrowth of transplanted MNP-labelled cells from the substantia nigra towards the striatum. The improved directionality highlights the viability of this approach as a remote-control methodology for the control and manipulation of cellular growth for regenerative medicine applications. This study presents a new tool to overcome challenges faced in the development of new therapies for PD.

Viscoelastic and dielectric properties of 5CB nematic liquid crystal doped by magnetic and nonmagnetic nanoparticles

In this article we show how spherical nanoparticles (NPs) imposing planar anchoring can strongly impact the viscoelastic, dielectric, and electro-optical properties of a nematic liquid crystal when they are not aggregated. We also demonstrate that when the NPs are magnetic, most nematic properties are more impacted than when they are nonmagnetic. With magnetic NPs a molecular disorder is induced that decreases the nematic order parameter, this decrease impacting the values of elastic constants, viscosity, and response time. The impact on 5CB liquid crystal (LC) has been investigated with spherical nanoparticles (NPs) of identical size around 6 nm, magnetic (γFe_{2}O_{3}), and nonmagnetic (CeO_{2}) ones that are both surface functionalized by poly(aminopropylmethylsiloxane-b-dimethylsiloxane) (PAPMS-b-PDMS) block copolymer ligands to promote planar anchoring. In the presence of nonmagnetic NPs, despite an almost constant nematic order parameter, a significant decrease of elastic constants (25.4%), viscosity (22%), and response time (23%) is measured. It suggests a dilution effect for the intermolecular interactions in the presence of NPs. This hypothesis is supported by the observation of an enhanced decrease of the same nematic parameters in the presence of magnetic NPs that can be fully explained by the corresponding order parameter decrease. This finally leads to a remarkable decrease of the splay elastic constant by 51% in the presence of magnetic NPs. The decrease of the nematic order parameter by 18% in the presence of magnetic NPs demonstrates that the NP magnetic moments are only weakly coupled to the nematic director and consequently only induce a disorder in the composite system. A significant influence of the expected large LC structural modifications in the presence of magnetic NPs is, however, shown by a particularly large increase of the diffusion coefficient 43% and large decrease of the dielectric anisotropy (43%). We believe that the observed impact of NPs with planar anchoring on nematic properties could be extended to most spherical NPs if their aggregation can be avoided. In particular, the difference between magnetic and nonmagnetic NPs could be extended to ferroelectric and nonferroelectric NPs.

Parallelized Manipulation of Adherent Living Cells by Magnetic Nanoparticles-Mediated Forces

The remote actuation of cellular processes such as migration or neuronal outgrowth is a challenge for future therapeutic applications in regenerative medicine. Among the different methods that have been proposed, the use of magnetic nanoparticles appears to be promising, since magnetic fields can act at a distance without interactions with the surrounding biological system. To control biological processes at a subcellular spatial resolution, magnetic nanoparticles can be used either to induce biochemical reactions locally or to apply forces on different elements of the cell. Here, we show that cell migration and neurite outgrowth can be directed by the forces produced by a switchable parallelized array of micro-magnetic pillars, following the passive uptake of nanoparticles. Using live cell imaging, we first demonstrate that adherent cell migration can be biased toward magnetic pillars and that cells can be reversibly trapped onto these pillars. Second, using differentiated neuronal cells we were able to induce events of neurite outgrowth in the direction of the pillars without impending cell viability. Our results show that the range of forces applied needs to be adapted precisely to the cellular process under consideration. We propose that cellular actuation is the result of the force on the plasma membrane caused by magnetically filled endo-compartments, which exert a pulling force on the cell periphery.

Magnetic Field-Driven Deformation, Attraction, and Coalescence of Nonmagnetic Aqueous Droplets in an Oil-Based Ferrofluid

Stimuli-responsive compartments are attracting more and more attention through the years motivated by their wide applications in different fields including encapsulation, manipulation, and triggering of chemical reactions on demand. Among others, magnetic responsive compartments are particularly attractive due to the numerous advantages of magnetic fields compared to other external stimuli. In this article, we used an oil-based ferrofluid where the magnetic nanoparticles have been coated with different polymers to increase their amphiphilic character and surface activity, consequently rendering the interface magnetically responsive. Microliter aqueous nonmagnetic droplets dispersed in the oil-based ferrofluid were used as a model of microreactors. A comprehensive experimental and theoretical study of the deformation, attraction, and coalescence processes of the nonmagnetic water droplets coated with the magnetic nanoparticles under an applied magnetic field in the continuous oil-based ferrofluid phase is provided. To manipulate the packing of the nanoparticles at the water/oil interface, the ionic strength of the aqueous droplets was varied using different NaCl concentrations, and its effect on modulating the coalescence of the droplets was probed. Our results show that the water droplets deform along the magnetic field depending on the magnetic properties of the ferrofluid itself and on the surface properties of the interface, attract in pairs under the action of the magnetic dipole force, and coalesce by the action of the same force with a stochastic behavior. We have studied all of these phenomena as a function of the magnetic field applied, evaluating in each case the forces and/or pressures acting on the droplets with particular attention to roles of magnetic attraction, interface properties, and viscosity in the system. This work offers an overall set of tools to understand and predict the behavior of multiple water droplets in an oil-based ferrofluid for lab-on-a-chip applications.

New Platform for Gravitational Microfluidic Using Ferrofluids

Among the large variety of microfluidic platforms, surface devices are a world apart. Electrowetting systems are used to control the displacement of droplets among predetermined pathways. More confidential, superhydrophobic surfaces are more and more described as new elements to guide spherical droplet reactors. As such, they can exhibit confinement properties analogous to channel-based microfluidics. In this article, we describe a new strategy to use superhydrophobic surfaces as a permanently tilted microfluidic platform, on which droplets containing iron oxide nanoparticles are guided with permanent magnets. These droplets are fed with water through a capillary tube until their weight exceeds the magnetic field force. Thus, the volume at which the droplet rolls off the surface is only governed by the initial quantity of magnetic nanoparticles and the tilting angle of the surface. This phenomenon provides a strategy for droplet dilution in a simple and reproducible manner, which is not that easy in microchannels, and a key advantage of open systems. As a proof of concept, we used this platform to prepare magnetic filaments by a salting-out process already described in large batches. By reducing salt concentration on the platform, we are able to control the electrostatic attractive interactions between iron oxide nanoparticles coated with poly(acrylic acid) and a positively charged polyelectrolyte [poly(diallyldimethylammonium chloride)]. The formation of nanostructured filaments was conducted in 2 min while more than 30 min was required for dialysis. Our results also illustrate the power of microfluidic reaction processes because such magnetic filaments could not be obtained through direct batch dilution because of mixing issues. Such microfluidic platforms could be useful for the efficient and simple dilution of systems where reactivity is controlled by concentration.

Recent insights in magnetic hyperthermia: From the "hot-spot" effect for local delivery to combined magneto-photo-thermia using magneto-plasmonic hybrids

Magnetic hyperthermia which exploits the heat generated by magnetic nanoparticles (MNPs) when exposed to an alternative magnetic field (AMF) is now in clinical trials for the treatment of cancers. However, this thermal therapy requires a high amount of MNPs in the tumor to be efficient. On the contrary the hot spot local effect refers to the use of specific temperature profile at the vicinity of nanoparticles for heating with minor to no long-range effect. This magneto-thermal effect can be exploited as a relevant external stimulus to temporally and spatially trigger drug release. In this review, we focus on recent advances in magnetic hyperthermia. Indirect experimental proofs of the local temperature increase are first discussed leading to a good estimation of the temperature at the surface (from 0.5 to 6 nm) of superparamagnetic NPs. Then we highlight recent studies illustrating the hot-spot effect for drug-release. Finally, we present another recent strategy to enhance the efficacity of thermal treatment by combining photothermal therapy with magnetic hyperthermia mediated by magneto-plasmonic nanoplatforms.

Magnetic Nanoparticles Create Hot Spots in Polymer Matrix for Controlled Drug Release

Herein, original magnetic drug delivery nanomaterials for cancer therapy are developed and compared, with the purpose to show active control over drug release by using an alternative magnetic field (AMF). The rationale is to combine polymers and superparamagnetic nanoparticles to trigger such drug release under AMF. Two magnetic nanosystems are thus presented: magnetic nanogels made of thermosensitive and biocompatible polymers and core-shell nanoparticles with a magnetic core and a molecularly imprinted polymer as shell. Both encapsulate doxorubicin (DOX) and the DOX controlled release was investigated in vitro and in cells under AMF excitation. It confirms that the local heat profile at the vicinity of the iron oxide core can be used for the DOX controlled release. It also shows that both nanosystems help delivering more DOX inside the cells compared to internalization of free DOX. Finally, the DOX intracellular release could be remotely triggered under AMF, in athermal conditions, thus enhancing DOX cytotoxicity.

Thermoresponsive hybrid double-crosslinked networks using magnetic iron oxide nanoparticles as crossing points

Preparation and characterization of stimuli-sensitive hybrid double-crosslinked hydrogels based on iron oxide nanoparticles as the nano-crosslinkers and a difuran-functionalized PEO as the diene partner for the thermoreversible Diels–Alder reaction.

Influence of a dispersion of magnetic and nonmagnetic nanoparticles on the magnetic Fredericksz transition of the liquid crystal 5CB

A long time ago, Brochard and de Gennes predicted the possibility of significantly decreasing the critical magnetic field of the Fredericksz transition (the magnetic Fredericksz threshold) in a mixture of nematic liquid crystals and ferromagnetic particles, the so-called ferronematics. This phenomenon is rarely measured to be large, due to soft homeotropic anchoring induced at the nanoparticle surface. Here we present an optical study of the magnetic Fredericksz transition combined with a light scattering study of the classical nematic liquid crystal: the pentylcyanobiphenyl (5CB), doped with 6 nm diameter magnetic and nonmagnetic nanoparticles. Surprisingly, for both nanoparticles, we observe at room temperature a net decrease of the threshold field of the Fredericksz transition at low nanoparticle concentrations, which appears associated with a coating of the nanoparticles by a brush of polydimethylsiloxane copolymer chains inducing planar anchoring of the director on the nanoparticle surface. Moreover, the magnetic Fredericksz threshold exhibits nonmonotonic behavior as a function of the nanoparticle concentration for both types of nanoparticles, first decreasing down to a value from 23% to 31% below that of pure 5CB, then increasing with a further increase of nanoparticle concentration. This is interpreted as an aggregation starting at around 0.02 weight fraction that consumes more isolated nanoparticles than those introduced when the concentration is increased above c=0.05 weight fraction (volume fraction 3.5×10^{-2}). This shows the larger effect of isolated nanoparticles on the threshold with respect to aggregates. From dynamic light scattering measurements we deduced that, if the decrease of the magnetic threshold when the nanoparticle concentration increases is similar for both kinds of nanoparticles, the origin of this decrease is different for magnetic and nonmagnetic nanoparticles. For nonmagnetic nanoparticles, the behavior may be associated with a decrease of the elastic constant due to weak planar anchoring. For magnetic nanoparticles there are non-negligible local magnetic interactions between liquid crystal molecules and magnetic nanoparticles, leading to an increase of the average order parameter. This magnetic interaction thus favors an easier liquid crystal director rotation in the presence of external magnetic field, able to reorient the magnetic moments of the nanoparticles along with the molecules.

Tuning the architectural integrity of high-performance magneto-fluorescent core-shell nanoassemblies in cancer cells

High-density nanoarchitectures, endowed with simultaneous fluorescence and contrast properties for MRI and TEM imaging, have been obtained using a simple self-assembling strategy based on supramolecular interactions between non-doped fluorescent organic nanoparticles (FON) and superparamagnetic nanoparticles. In this way, a high-payload core-shell structure FON@mag has been obtained, protecting the hydrophobic fluorophores from the surroundings as well as from emission quenching by the shell of magnetic nanoparticles. Compared to isolated nanoparticles, maghemite nanoparticles self-assembled as an external shell create large inhomogeneous magnetic field, which causes enhanced transverse relaxivity and exacerbated MRI contrast. The magnetic load of the resulting nanoassemblies is evaluated using magnetic sedimentation and more originally electrospray mass spectrometry. The role of the stabilizing agents (citrate versus polyacrylate anions) revealed to be crucial regarding the cohesion of the resulting high-performance magneto-fluorescent nanoassemblies, which questions their use after cell internalization as nanocarriers or imaging agents for reliable correlative light and electron microcopy.

Magnetic hyperthermia-induced drug release from ureasil-PEO-γ-Fe2O3 nanocomposites

A multifunctional hybrid material suitable for cancer therapy, combining stimuli-responsive properties for drug delivery and magnetic hyperthermia.

Design of magnetic molecularly imprinted polymer nanoparticles for controlled release of doxorubicin under an alternative magnetic field in athermal conditions

An innovative magnetic delivery nanomaterial for triggered cancer therapy showing active control over drug release by using an alternative magnetic field is proposed. In vitro and In vivo release of doxorubicin (DOX) were investigated and showed a massive DOX release under an alternative magnetic field without temperature elevation of the medium.

Evidence of a two-step process and pathway dependency in the thermodynamics of poly(diallyldimethylammonium chloride)/poly(sodium acrylate) complexation

Recent studies have pointed out the importance of polyelectrolyte assembly in the elaboration of innovative nanomaterials. Beyond their structures, many important questions on the thermodynamics of association remain unanswered. Here, we investigate the complexation between poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium acrylate) (PANa) chains using a combination of three techniques: isothermal titration calorimetry (ITC), static and dynamic light scattering and electrophoresis. Upon addition of PDADMAC to PANa or vice-versa, the results obtained by the different techniques agree well with each other, and reveal a two-step process. The primary process is the formation of highly charged polyelectrolyte complexes of size 100 nm. The secondary process is the transition towards a coacervate phase made of rich and poor polymer droplets. The binding isotherms measured are accounted for using a phenomenological model that provides the thermodynamic parameters for each reaction. Small positive enthalpies and large positive entropies consistent with a counterion release scenario are found throughout this study. Furthermore, this work stresses the importance of the underestimated formulation pathway or mixing order in polyelectrolyte complexation.

Highly cohesive dual nanoassemblies for complementary multiscale bioimaging

Core–shell nanoarchitectures made of non-doped fluorescent organic platforms capped with magnetic nanoparticles display high bioimaging performances.

Poly(acrylic acid)-coated iron oxide nanoparticles: quantitative evaluation of the coating properties and applications for the removal of a pollutant dye

In this work, 6-12 nm iron oxide nanoparticles were synthesized and coated with poly(acrylic acid) chains of molecular weight 2100 g mol(-1). Based on a quantitative evaluation of the dispersions, the bare and coated particles were thoroughly characterized. The number densities of polymers adsorbed at the particle surface and of available chargeable groups were found to be 1.9±0.3 nm(-2) and 26±4 nm(-2), respectively. Occurring via a multi-site binding mechanism, the electrostatic coupling leads to a solid and resilient anchoring of the chains. To assess the efficacy of the particles for pollutant remediation, the adsorption isotherm of methylene blue molecules, a model of pollutant, was determined. The excellent agreement between the predicted and the measured amounts of adsorbed dyes suggests that most carboxylates participate to the complexation and adsorption mechanisms. An adsorption of 830 mg g(-1) was obtained. This quantity compares well with the highest values available for this dye.

Interfacial activity of phosphonated-PEG functionalized cerium oxide nanoparticles

In a recent publication, we have highlighted the potential of phosphonic acid terminated PEG oligomers to functionalize strong UV absorption cerium oxide nanoparticles, which yield suspensions that are stable in aqueous or organic solvents and are redispersible in different solvents after freeze-drying. In the present work, we highlight the interfacial activity of the functional ceria nanoparticles and their potential to modify hydrophobic surfaces. We first investigated the phosphonated-PEG amphiphilic oligomers behavior as strong surface active species forming irreversibly adsorbed layers. We then show that the oligomers interfacial properties translate to the functional nanoparticles. In particular, the addition of a small fraction of phosphonated-PEG oligomers with an extra C16 aliphatic chain (stickers) into the formulation enabled the tuning of (i) the nanoparticles adsorption at the air/water, polystyrene/water, oil/water interfaces and (ii) the particle/particle interaction in aqueous solutions. We also found that dense and closely packed two-dimensional monolayers of nanoceria can be formed by spontaneous adsorption or surface compression using a Langmuir trough. A hexagonal organization controlled by reversible and repulsive interaction has been characterized by GISAXS. Mono- or multilayers can also be stably formed or transferred on solid surfaces. Our results are key features in the field of polymer surface modification, solid-stabilized emulsions (Pickering), or supracolloidal assemblies.

A universal scaling law to predict the efficiency of magnetic nanoparticles as MRI T(2)-contrast agents

Magnetic particles are very efficient magnetic resonance imaging (MRI) contrast agents. In recent years, chemists have unleashed their imagination to design multi-functional nanoprobes for biomedical applications including MRI contrast enhancement. This study is focused on the direct relationship between the size and magnetization of the particles and their nuclear magnetic resonance relaxation properties, which condition their efficiency. Experimental relaxation results with maghemite particles exhibiting a wide range of sizes and magnetizations are compared to previously published data and to well-established relaxation theories with a good agreement. This allows deriving the experimental master curve of the transverse relaxivity versus particle size and to predict the MRI contrast efficiency of any type of magnetic nanoparticles. This prediction only requires the knowledge of the size of the particles impermeable to water protons and the saturation magnetization of the corresponding volume. To predict the T(2) relaxation efficiency of magnetic single crystals, the crystal size and magnetization - obtained through a single Langevin fit of a magnetization curve - is the only information needed. For contrast agents made of several magnetic cores assembled into various geometries (dilute fractal aggregates, dense spherical clusters, core-shell micelles, hollow vesicles…), one needs to know a third parameter, namely the intra-aggregate volume fraction occupied by the magnetic materials relatively to the whole (hydrodynamic) sphere. Finally a calculation of the maximum achievable relaxation effect - and the size needed to reach this maximum - is performed for different cases: maghemite single crystals and dense clusters, core-shell particles (oxide layer around a metallic core) and zinc-manganese ferrite crystals.

Magnetic nanowires generated via the waterborne desalting transition pathway

We report a simple and versatile waterborne synthesis of magnetic nanowires following the innovative concept of electrostatic "desalting transition". Highly persistent superparamagnetic nanowires are generated from the controlled assembly of oppositely charged nanoparticles and commercially available polyelectrolytes. The wires have diameters around 200 nm and lengths between 1 μm and 0.5 mm, with either positive or negative charges on their surface. Beyond, we show that this soft-chemistry assembly approach is a general phenomenon independent of the feature of the macromolecular building blocks, opening significant perspectives for the design of multifunctional materials.

Electrosteric enhanced stability of functional sub-10 nm cerium and iron oxide particles in cell culture medium

Applications of nanoparticles in biology require that the nanoparticles remain stable in solutions containing high concentrations of proteins and salts, as well as in cell culture media. In this work, we developed simple protocols for the coating of sub-10 nm nanoparticles and evaluated the colloidal stability of dispersions in various environments. Ligands (citric acid), oligomers [phosphonate-terminated poly(ethylene oxide)], and polymers [poly(acrylic acid)] were used as nanometer-thick adlayers for cerium (CeO2) and iron (gamma-Fe2O3) oxide nanoparticles. The organic functionalities were adsorbed on the particle surfaces via physical (electrostatic) forces. Stability assays at high ionic strengths and in cell culture media were performed by static and dynamic light scattering. Of the three coatings examined, we found that only poly(acrylic acid) fully preserved the dispersion stability over the long term (longer than weeks). The improved stability was explained by the multipoint attachments of the chains onto the particle surface and by the adlayer-mediated electrosteric interactions. These results suggest that anionically charged polymers represent an effective alternative to conventional coating agents.

Universal scattering behavior of coassembled nanoparticle-polymer clusters

Water-soluble clusters made from 7-nm inorganic nanoparticles have been investigated by small-angle neutron scattering. The internal structure factor of the clusters was derived and exhibited a universal behavior as evidenced by a correlation hole at intermediate wave vectors. Reverse Monte Carlo calculations were performed to adjust the data and provided an accurate description of the clusters in terms of interparticle distance and volume fraction. Additional parameters influencing the microstructure were also investigated, including the nature and thickness of the nanoparticle adlayer.

Redispersible hybrid nanopowders: cerium oxide nanoparticle complexes with phosphonated-PEG oligomers

Rare earth cerium oxide (ceria) nanoparticles are stabilized using end-functional phosphonated-PEG oligomers. The complexation process and structure of the resulting hybrid core-shell singlet nanocolloids are described, characterized, and modeled using light and neutron scattering data. The adsorption mechanism is nonstoichiometric, yielding the number of adsorbed chains per particle N(ads) = 270 at saturation. Adsorption isotherms show a high affinity of the phosphonate head for the ceria surface (adsorption energy DeltaG(ads) approximately -16kT) suggesting an electrostatic driving force for the complexation. The ease, efficiency, and integrity of the complexation is highlighted by the formation of nanometric sized cerium oxide particles covered with a well anchored PEG layer, maintaining the characteristics of the original sol. This solvating brushlike layer is sufficient to solubilize the particles and greatly expand the stability range of the original sol (<pH 3) up to pH = 9. We underscore two key attributes of the tailored sol: (i) strong UV absorption capability after functionalization and (ii) ability to redisperse after freeze-drying as powder in aqueous or organic solvents in varying concentrations as singlet nanocolloids. This robust platform enables translation of intrinsic properties of mineral oxide nanoparticles to critical end use.

Organic versus hybrid coacervate complexes: co-assembly and adsorption properties

We report the co-assembly and adsorption properties of coacervate complexes made from polyelectrolyte-neutral block copolymers and oppositely charged nanocolloids. The nanocolloids put under scrutiny were ionic surfactant micelles and highly charged 7 nm cerium oxide (CeO2) nanoparticles. Static and dynamic light scattering was used to investigate the microstructure and stability of the organic and hybrid complexes. For five different systems of nanocolloids and polymers, we first demonstrated that the electrostatic complexation resulted in the formation of stable core-shell aggregates in the 100 nm range. The microstructure of the CeO2-based complexes was resolved using cryogenic transmission electronic microscopy (Cryo-TEM), and it revealed that the cores were clusters made from densely packed nanoparticles, presumably through complexation of the polyelectrolyte blocks by the surface charges. The cluster stability was monitored by systematic light scattering measurements. In the concentration range of interest, c = 10-4-1 wt.%, the surfactant-based complexes were shown to exhibit a critical association concentration (cac) whereas the nanoparticle-polymer hybrids did not. The adsorption properties of the same complexes were investigated above the cac by stagnation point adsorption reflectometry. The adsorbed amount was measured as a function of time for polymers and complexes using anionically charged silica and hydrophobic poly(styrene) substrates. It was found that all complexes adsorbed readily on both types of substrates up to a level of 1-2 mg m-2 at stationary state. Upon rinsing however, the adsorbed layer was removed for the surfactant-based systems, but not for the cerium oxide clusters. As for the solution properties, these finding were interpreted in terms of a critical association concentrations, which are very different for organic and hybrid complexes. Combining the efficient adsorption and strong stability of the CeO2-based core-shell hybrids on various substrates, it is finally suggested that these systems could be used appropriately for coating and anti-biofouling applications.

Stability and adsorption properties of electrostatic complexes: design of hybrid nanostructures for coating applications

We report the presence of a correlation between the bulk and interfacial properties of electrostatic coacervate complexes. Complexes were obtained by co-assembly between cationic-neutral diblocks and oppositely charged surfactant micelles or 7 nm cerium oxide nanoparticles. Light scattering and reflectometry measurements revealed that the hybrid nanoparticle aggregates were more stable through both dilution and rinsing (from either a polystyrene or a silica surface) than their surfactant counterparts. These findings were attributed to a marked difference in critical association concentration between the two systems and to the frozen state of the hybrid structures.