[18F]Sodium fluoride PET-MRI detects increased metabolic bone response to whole-joint loading stress in osteoarthritic knees

OBJECTIVE

Altered joint function is a hallmark of osteoarthritis (OA). Imaging techniques for joint function are limited, but [18F]sodium fluoride (NaF) PET-MRI may assess the acute joint response to loading stresses. [18F]NaF PET-MRI was used to study the acute joint response to exercise in OA knees, and compare relationships between regions of increased uptake after loading and structural OA progression two years later.

METHODS

In this prospective study, 10 participants with knee OA (59 ± 8 years; 8 female) were scanned twice consecutively using a PET-MR system and performed a one-legged squat exercise between scans. Changes in tracer uptake measures in 9 bone regions were compared between knees that did and did not exercise with a mixed-effects model. Areas of focally large changes in uptake between scans (ROIfocal, ΔSUVmax > 3) were identified and the presence of structural MRI features was noted. Five participants returned two years later to assess structural change on MRI.

RESULTS

There was a significant increase in [18F]NaF uptake in OA exercised knees (SUV P < 0.001, KiP = 0.002, K1P < 0.001) that differed by bone region.

CONCLUSION

There were regional differences in the acute bone metabolic response to exercise and areas of focally large changes in the metabolic bone response that might be representative of whole-joint dysfunction.

[18F]NaF PET-MRI provides direct in-vivo evidence of the association between bone metabolic activity and adjacent synovitis in knee osteoarthritis: a cross-sectional study

OBJECTIVE

Synovitis is hypothesized to play a role in the development and growth of osteophytes. Our objectives were to use hybrid positron emission tomography-magnetic resonance imaging (PET-MRI) to (1) determine whether synovitis adjacent to peripheral bone subregions with increased metabolic activity is greater than adjacent to regions without increased metabolic activity and (2) assess the association between subregional bone metabolic activity and adjacent synovitis.

DESIGN

We recruited 11 participants (22 knees) with a diagnosis of OA in at least one knee. Simultaneous bilateral knee PET-MRI was performed. We quantified bone metabolic activity using the radiotracer [18F]sodium fluoride ([18F]NaF) with calculation of maximum standardized uptake values (SUVmax). Synovitis was quantified using dynamic contrast-enhanced MRI with calculation of Ktrans. Bone subregions were coded as osteophyte (OP), focal increased [18F]NaF uptake without osteophyte (FIU), or normal (no osteophyte or FIU). We used robust linear mixed effects models to assess differences in adjacent Ktrans between different subregion types and to assess association between Ktrans and adjacent SUVmax.

RESULTS

94 OPs were detected (59 MOAKS grade 1, 30 grade 2, 5 grade 3), along with 28 FIU and 18 normal subregions. Ktrans was higher adjacent to FIU (adjusted mean [95% CI] = 0.06 [0.03,0.09]) and OPs (0.08 [0.05,0.11]) when compared to normal bone subregions (0.03 [0.00,0.09]). PET SUVmax was positively associated with adjacent Ktrans (β[95% CI] = 0.018 [0.008,0.027]).

CONCLUSIONS

Synovitis is more intense adjacent to peripheral bone regions with increased metabolic activity than those without, although there is some overlap. Subregional bone metabolic activity is positively associated with intensity of adjacent synovitis.

Systematic review and meta-analysis of the reliability and discriminative validity of cartilage compositional MRI in knee osteoarthritis

OBJECTIVE

To assess reliability and discriminative validity of cartilage compositional magnetic resonance imaging (MRI) in knee osteoarthritis (OA).

DESIGN

The study was carried out per PRISMA recommendations. We searched MEDLINE and EMBASE (1974 - present) for eligible studies. We performed qualitative synthesis of reliability data. Where data from at least two discrimination studies were available, we estimated pooled standardized mean difference (SMD) between subjects with and without OA. Discrimination analyses compared controls and subjects with mild OA (Kellgren-Lawrence (KL) grade 1-2), severe OA (KL grade 3-4) and OA not otherwise specified (NOS) where not possible to stratify. We assessed quality of the evidence using Quality Appraisal of Diagnostic Reliability (QAREL) and Quality Assessment of Diagnostic Accuracy (QUADAS-2) tools.

RESULTS

Fifty-eight studies were included in the reliability analysis and 26 studies were included in the discrimination analysis, with data from a total of 2,007 knees. Intra-observer, inter-observer and test-retest reliability of compositional techniques were excellent with most intraclass correlation coefficients >0.8 and coefficients of variation <10%. T1rho and T2 relaxometry were significant discriminators between subjects with mild OA and controls, and between subjects with OA (NOS) and controls (P < 0.001). T1rho showed best discrimination for mild OA (SMD [95% CI] = 0.73 [0.40 to 1.06], P < 0.001) and OA (NOS) (0.60 [0.41 to 0.80], P < 0.001). Quality of evidence was moderate for both parts of the review.

CONCLUSIONS

Cartilage compositional MRI techniques are reliable and, in the case of T1rho and T2 relaxometry, can discriminate between subjects with OA and controls.

Subchondral bone in osteoarthritis: association between MRI texture analysis and histomorphometry

OBJECTIVE

Magnetic resonance imaging (MRI) texture analysis is a method of analyzing subchondral bone alterations in osteoarthritis (OA). The objective of this study was to evaluate the association between MR texture analysis and ground-truth subchondral bone histomorphometry at the tibial plateau.

DESIGN

The local research ethics committee approved the study. All subjects provided written, informed consent. This was a cross-sectional study carried out at our institution between February and August 2014. Ten participants aged 57-84 with knee OA scheduled for total knee arthroplasty (TKA) underwent pre-operative MRI of the symptomatic knee at 3T using a high spatial-resolution coronal T1 weighted sequence. Tibial plateau explants obtained at the time of TKA underwent histological preparation to allow calculation of bone volume fraction (BV.TV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp) and trabecular number (Tb.N). Texture analysis was performed on the tibial subchondral bone of MRI images matched to the histological sections. Regression models were created to assess the association of texture analysis features with BV.TV, Tb.Th, Tb.Sp and Tb.N.

RESULTS

MRI texture features were significantly associated with BV.TV (R² = 0.76), Tb.Th (R² = 0.47), Tb.Sp (R² = 0.75) and Tb.N (R² = 0.60, all P < 0.001). Simple gray-value histogram based texture features demonstrated the highest standardized regression coefficients for each model.

CONCLUSION

MRI texture analysis features were significantly associated with ground-truth subchondral bone histomorphometry at the tibial plateau.

Trochlear boss height measurement: a comparison of radiographs and MRI

BACKGROUND

A key anatomical consideration and determinant of surgical approach in trochlear dysplasia is the trochlear boss height (TBH), traditionally defined by measurements on plain X-rays (XR). Magnetic resonance (MR) imaging is increasingly used for pre-operative planning and follow-up. However, it is unclear whether measurement of TBH on XR is applicable to MR. The aim of this study was to establish the reliability of TBH measurement on MR compared to XR.

METHODS

This study used lateral knee radiographs and MR scans of 14 knees of patients with trochlear dysplasia, six knees of non-dysplastic patients with anterior knee pain (AKP), and five knees of non-dysplastic controls with no AKP. Correlation between XR and MR measurements was assessed using Pearson correlation coefficients. Agreement between methods and observers was assessed using Bland-Altman plots with 95% limits of agreement. Intra- and inter-observer reliability was assessed using intraclass correlation coefficients (ICC).

RESULTS

Bland-Altman charts showed a total width of 95% limits of agreement of 4.78 mm for XR and MR subchondral bone (SB) TBH measurements, and 6.73 mm for XR and MR cartilage TBH measurements. Inter-observer ICCs were 0.86 for XR, 0.62 for MR SB, and 0.53 for MR cartilage. The widths of the Bland-Altman 95% limits of agreement between observers were 4.79 mm (XR), 5.04 mm (MR SB) and 4.74 mm (MR cartilage).

CONCLUSION

Measurement of TBH on MR is not directly interchangeable with XR. Adjustments need to be made to treatment thresholds based on XR measurement if MR is used instead.

Preparation and Testing of Latex Compounds

Films should be prepared in an atmosphere free from air currents at 60 to 75 per cent relative humidity and at a temperature of 21.2° to 29.2° C. (70° to 85° F.) during the first 8 hours of the drying period. These films should be suspended for complete drying for an additional 48 hours at 0 per cent humidity and 10° to 15.5° C. (50° to 60° F.) before curing. The water-cured films should be dried 3 hours in the open room followed by about 20 hours at 0 per cent humidity and 10° to 15.5° C. (50° to 60° F.) before the preparation of test pieces. The air cures are kept in a desiccator for about 24 hours at 0 per cent humidity and 10° to 15.5° C. (50° to 60° F.) before the preparation of test pieces. The die for preparing test pieces must have perfect cutting edges. Test pieces should be conditioned 48 hours at 0 per cent humidity and 21.1° C. (70° F.) before testing to obtain maximum tensile and modulus results. The effect of humidity on physical test will be greater on normal latex, Revertex, and stabilized latex because of their increased water-soluble constituents which increase water adsorption. Good averages are obtained from three of four test strips broken, but for accurate work the average of the best four of six test strips should be taken.

Extraction of Water-Soluble Accelerators in Water Cure

No measurable quantity of the water-soluble accelerators tested was extracted from the rubber during the water extraction. Therefore, these accelerators will not be extracted during vulcanization in water. The softening action observed in water-cured latex products is due to the extraction of water-soluble nonrubber components from the rubber film. The water-soluble accelerators tested have a selective solubility for rubber which is many times greater than their solubility in water.

Reënforcing Action of Pigment Mixtures on Rubber Compounds

Mixtures of varying ratios of either channel black or a soft carbon black with whiting, lithopone, or clay show additive physical properties. Mixtures of soft carbon with zinc oxide also show additive properties, while mixtures of channel black and zinc oxide show poorer resistance to abrasion, higher modulus, and higher tensile strength than would be shown by purely additive mixtures. The explanation of these results appears to be found in the chemical reaction between the basic zinc oxide and the acidic compounds in the rubber or on the black. These results have been applied to the formulation of a solid-tire stock which will give a better resistance to abrasion and blow-out when using a soft black than when using a channel black.