Digital coincidence counting with 4πβ(PPC)-γ for the standardization of 60Co

A 4πβ(PPC)-γ coincidence system has been made at KRISS based on a digital DAQ. 60Co sources were measured to verify the system. The maximum detection efficiency for beta particles was estimated to be 96.7 %. Massic activities for sample sources had 0.005 % of the sample variability error, which was well within the expanded standard uncertainty of 0.54 % (k = 2).

A simplified cranial cavity model to understand the relationship between intracranial pressure and dural sinus pressure

Although accurate intracranial pressure (ICP) monitoring is essential for the diagnosis and treatment of severe brain diseases, current methods are performed invasively. Therefore, a safe and less invasive ICP measurement is required. The purpose of our study was to develop a simplified cranial cavity model for a better understanding of the relationship between the ICP and the pressure measurement within the dural venous sinus (DVS) to support the validity of using sinus pressure as the surrogate of the ICP. The in-house cranial cavity model had three components: the brain part, the DVS part, and the subarachnoid space (SAS) part. Pressure in other parts was measured when the pressure in the SAS part and, separately, brain part was increased from 0 (baseline) to 50 mmHg at intervals of 10 mmHg. When the pressure in the SAS part was increased from 10 to 50 mmHg at 10 mmHg interval, pressures of both the brain and DVS parts increased without significant difference (all P > 0.05). However, pressures in both the SAS and DVS parts differed while the pressure in the brain part was increased. The pressures in both parts showed about 70% of the increase in the brain part. Nevertheless, the pressures in the SAS and DVS parts were not significantly different (P > 0.05). A simplified in-house cranial cavity model was developed consisting of three compartments to represent the actual intracranial spaces. The pressure measurement within the DVS was feasible to use as a surrogate for the ICP measurement.

Quantitative Detection of Thitsiol and Urushiol as Markers from the Gluta usitata Lacquer Tree Using HPLC

Lacquer sap has been traditionally used in coatings and artwork. Suitable types of lacquer are required to preserve and restore artifacts. Recently, unsuitable cashew nut shell liquid (CNSL) has often been mixed with lacquer sap, so it is necessary to identify the characteristics of lacquer sap by the production area. However, research is still focused on urushiol and laccol. In this study, Myanmarese lacquer sap collected from Gluta usitata, which contains thitsiol as the main component, was analyzed by HPLC to quantify thitsiol using the standards 3-(10-phenyldecyl) benzene-1,2-diol (thitsiol 16) and 3-(8Z,11Z-pentadecadienyl)-benzenediol (urushiol 15:2) as markers, and calibration curves were plotted. The coefficients of determination (R2) for thitsiol 16 and urushiol 15:2 were 0.9985 and 0.9983, respectively. In addition, a blind test was conducted to confirm that accurate quantitative analysis was possible even when Myanmarese lacquer was mixed with lacquer from another production area, which contained urushiol as the main component, and CNSL, which contained cardol, a completely different catechol. Quantitative analysis of thitsiol 16 and urushiol 15:2 in Myanmarese lacquer using HPLC can be used to evaluate the quality of lacquer sap and for more sophisticated activities such as restoration by classifying differences in lacquer sap by the production area.

Novel H2S sensing mechanism derived from the formation of oligomeric sulfide capping the surface of gold nanourchins

A gold nanourchin (AuNU) probe with a novel sensing mechanism for monitoring H2S was developed as a feasible colorimetric sensor. In this study, AuNUs that are selectively responsive to H2S were fabricated in the presence of trisodium citrate and 1,4-hydroquinone using a seed-mediated approach. Upon exposure of the AuNU solution to H2S, the hydrosulfide ions (HS-) in the solution are converted into oligomeric sulfides by 1,4-hydroquinone used as a reducing agent during the synthesis of AuNUs. The oligomeric sulfides formed in the AuNU solution upon the addition of H2S were found to coat the surface of the AuNUs, introducing a blue shift in absorption accompanied by a color change in the solution from sky blue to light green. This colorimetric alteration by the capping of oligomeric sulfides on the surface of AuNUs is unique compared to well-known color change mechanisms, such as aggregation, etching, or growth of nanoparticles. The novel H2S sensing mechanism of the AuNUs was characterized using UV-Vis spectroscopy, high-resolution transmission microscopy, X-ray photoelectron spectroscopy, surface-enhanced Raman spectroscopy, secondary ion mass spectroscopy, liquid chromatography-tandem mass spectrometry, and atom probe tomography. H2S was reliably monitored with two calibration curves comprising two sections with different slopes according to the low (0.3-15 μM) and high (15.0-300 μM) concentration range using the optimized AuNU probe, and a detection limit of 0.29 μM was obtained in tap water.

Computational Investigation of Conformational Properties of Short Azapeptides: Insights from DFT Study and NBO Analysis

Azapeptides have gained much attention due to their ability to enhance the stability and bioavailability of peptide drugs. Their structural preferences, essential to understanding their function and potential application in the peptide drug design, remain largely unknown. In this work, we systematically investigated the conformational preferences of three azaamino acid residues in tripeptide models, Ac-azaXaa-Pro-NHMe [Xaa = Asn (4), Asp (5), Ala (6)], using the popular DFT functionals, B3LYP and B3LYP-D3. A solvation model density (SMD) was used to mimic the solvation effect on the conformational behaviors of azapeptides in water. During the calculation, we considered the impact of the amide bond in the azapeptide models on the conformational preferences of models 4-6. We analyzed the effect of the HB between the side-chain main chain and main-chain main-chain on the conformational behaviors of azapeptides 4-6. We found that the predicted lowest energy conformation for the three models differs depending on the calculation methods. In the gas phase, B3LYP functional indicates that the conformers tttANP-1 and tttADP-1 of azapeptides 4 and 5 correspond to the type I of β-turn, the lowest energy conformation with all-trans amide bonds. Considering the dispersion correction, B3LYP-D3 functional predicts the conformers tctANP-2 and tctADP-3 of azapeptide 4 and 5, which contain the cis amide bond preceding the Pro residue, as the lowest energy conformation in the gas phase. The results imply that azaAsx and Pro residues may involve cis-trans isomerization in the gas phase. In water, the predicted lowest energy conformer of azapeptides 4 and 5 differs from the gas phase results and depends on the calculational method. For azapeptide 6, regardless of calculation methods and phases, tttAAP-1 (β-I turn) is predicted as the lowest energy conformer. The results imply that the effect of the side chain that can form HBs on the conformational preferences of azapeptides 4 and 5 may not be negligible. We compared the theoretical results of azaXaa-Pro models with those of Pro-azaXaa models, showing that incorporating azaamino acid residue in peptides at different positions can significantly impact the folding patterns and stability of azapeptides.

Measurement of Direct-Photon Cross Section and Double-Helicity Asymmetry at sqrt[s]=510 GeV in p[over →]+p[over →] Collisions

We present measurements of the cross section and double-helicity asymmetry A_{LL} of direct-photon production in p[over →]+p[over →] collisions at sqrt[s]=510  GeV. The measurements have been performed at midrapidity (|η|<0.25) with the PHENIX detector at the Relativistic Heavy Ion Collider. At relativistic energies, direct photons are dominantly produced from the initial quark-gluon hard scattering and do not interact via the strong force at leading order. Therefore, at sqrt[s]=510  GeV, where leading-order-effects dominate, these measurements provide clean and direct access to the gluon helicity in the polarized proton in the gluon-momentum-fraction range 0.02<x<0.08, with direct sensitivity to the sign of the gluon contribution.

High-sensitivity NH3 gas sensor using pristine graphene doped with CuO nanoparticles

A highly sensitive and selective NH₃ gas sensor was developed based on single-layer pristine graphene doped with copper(II) oxide (CuO) nanoparticles of a specific size. High-quality single-layer graphene was grown using chemical vapor deposition. Approximately 15 nm-sized CuO colloidal nanoparticles were fabricated by a microwave-assisted thermal method using copper acetate as the precursor, and dimethylformamide as the reducing and stabilizing agent. Pristine graphene was doped with an aqueous suspension of CuO nanoparticles at a coating speed of 1500 rpm using a simple spin coater. CuO nanoparticle doping induces changes in the electronic properties of graphene; in particular, p-type doping significantly altered graphene resistivity in the presence of NH₃ gas. Upon exposure of the pristine graphene surface to NH₃ gas, NH₃ reacted with O₂^-/ O^-/ O^2- species on the graphene surface and released electrons into graphene. This caused a change in the concentration of charge carriers in the valence channel of graphene and an increase in graphene resistivity, facilitating real-time NH₃ monitoring with quick response and rapid recovery at 25 ℃ and ~ 55% relative humidity. Our results indicated that graphene doped with ~ 15 nm-sized CuO nanoparticles can sense NH₃ gas selectively with a resistivity response of ~ 83%. Moreover, the sensor exhibited good reusability, fast response (~ 19 s), and rapid recovery (~ 277 s) with a detection limit of 0.041 ppm and a relative standard deviation of 0.76%.

Three-dimensional navigation-guided percutaneous trans-symphyseal screw for mechanically unstable pubic symphysis diastasis

Minimally invasive trans-symphyseal screw (TSS) for pubic symphysis diastasis was recently advocated, and its feasibility and reproducibility under 3D-navigation guidance are explored. Fifteen cases between 2016 and 2021 with a background of pubic symphysis diastasis are reviewed in this case series. Twenty-two TSS were inserted with an average Injury Severity Score of 35.3. Sixty percent received a one-stage procedure including fracture reduction, intra-operative 3D imaging, and planning followed by execution. The mean operative time and blood loss were 132 minutes and 160 ml, respectively. Average fracture healing was 5.8 months with two delayed unions at 9 months. The pubic symphysis distance was maintained in all cases at 6 months post-op. The average Marjeed score, Multicenter Study Group Pelvic Outcome Score, and Numeric pain rating scale were 60.2, 6.5, and 2.7, respectively. We conclude that 3D-navigation-guided percutaneous TSS restores pelvic stability and provides satisfactory pain control, and thus a safe and effective alternative to open reduction internal fixation.

Prostate cancer biomarker citrate detection using triaminoguanidinium carbon dots, its applications in live cells and human urine samples

Citrate is a tricarboxylate, plays vital role in prostate cancer (PC) and the level of citrate is an indicator for PC identification. Herein, triaminoguanidine carbon dots (TAG-CDs) prepared by one step hydrothermal method and used as a citrate receptor. Notably the TAG-CDs without alkaline treatment were highly fluorescent at pH 7 with high quantum yield (11.3%). TAG-CDs were characterized through TEM, XRD, FT-IR, UV-vis and spectrofluorimetry. It is noted that the average size was of 2.8 nm, the presence of highly disordered carbon, retain the functionality of TAG. The absorbance maxima obtained at 294 nm and good emitting response observed at 396 nm. The Y-aromaticity of receptor guanidinium moiety acts as Lewis acid and have peculiar interaction with Lewis base citrate via electrostatic interaction and also protons in the TAG participate hydrogen bonds with citrate, which causes quenching of TAG-CDs. From the obtained linear quenching equation the LOD was found to be 4 nM. The probe expressed high selectivity, high interference tolerance (500 - fold), fast response in 15 mins and good biocompatible. Finally, TAG-CDs utilized for the intracellular imaging of citrate in live MCF-7 cells, it showed good cytotoxicity and delivered contrast images in presence, absence of citrate. TAG-CDs detected the citrate level in human urine samples, the obtained results are validated with HPLC method.

A new recognition moiety diphenylborinate in the detection of pyruvate via Lewis acid/base sensing pathway and its bioimaging applications

Developing new reaction based recognizing units can enhance the specificity of target analyte molecules in practical applications of real samples and biosystems. Therefore, introducing a recognizing moiety diphenylborinate was encountered for the detection of pyruvate biomolecule through Lewis acid-base reaction based sensing strategy. The construction of the Schiff-base back bone between quinoline and N-(diethylamino)salicylaldehyde-diphenylborinate (QSB) were expressed the red shift from blue emission of quinoline in to green as that of dative bond developed between Schiff base nitrogen and boron atoms. The new sensing approach was involved such a way that fluorophore QSB is a Lewis acid while pyruvate acts as Lewis base, where the elimination of Lewis pair produced a weak green fluorescence including the formation of quinoline, N-(diethylamino)salicylaldehyde (QS). The switching products were witnessed through ¹H NMR titration, HR-MS and FT-IR studies. The good selectivity and interference ability were achieved in presence of 1000-fold excess of possible interferences with LOD of 16 nM. Moreover, the tracking ability of the probe was employed towards pyruvate in live HeLa cell imaging for evaluating an exogenous and endogenous signals producing ability and its mitochondria targeting property was investigated successfully. Further, the practical utility of the probe was tested with milk samples and obtained good recovery results.

Quantitative Hg2+ detection via forming three coordination complexes using a lysosome targeting quinoline - Fisher aldehyde fluorophore

This work describes (Z)-N-((Z)-2-(1,3,3-trimethylindolin-2ylidene)ethylidene)quinoline-8-amine (LYSO-QF), a high-performing and biocompatible dye comprised of quinoline and Fisher aldehyde moieties linked via an imine vinyl backbone with lysosome targeting ability that can be used to quantitatively detect the mercury ion (Hg²⁺) in biosystems and the natural environment. This is achieved by forming three different tetrameric, trimeric and dimeric complexes between Hg²⁺ and LYSO-QF with the limit of detection (LOD) of 11 nm. The complexes formed were analyzed with the aid of time-dependent density functional theory (TD-DFT) calculations. The concentration dependence of the Hg²⁺ complex fluorescence emission changes from grey-green to jade green and then to red as the different types of complex are formed. The favorable sensor properties of the LYSO-QF probe are demonstrated by monitoring different Hg²⁺ concentrations in buffer solutions, HeLa cells, zebrafish model samples and several different types of water sample. Experiments with Whatman paper strips demonstrate that the cost-effective LYSO-QF also has considerable potential for use in on-site Hg²⁺ detection with the naked eye.

Standardization of 129I using the movable 4πβ(LS)-X(NaI(Tl)) system

The ¹²⁹I standardization, using the movable 4πβ(LS)-X(NaI(Tl)) coincidence system, was performed for two ¹²⁹I radioactive sources - one was dissolved in 0.1M NaOH solution and the other in 0.1M HNO₃ solution. The system incorporates three movable PM tubes for a β-counter placed on a plane and a X-ray detector that can be moved up to the bottom of the vial. The β-efficiency depending on the amount of radioactive solution was investigated with 14 liquid scintillation samples prepared by gravimetrically dispensing 4.4-145 mg of ¹²⁹I radioactive solution. The β-efficiencies above 90% were observed at less than 56 mg, but it was at most 70% at 145 mg. This occurred regardless of the activity of the sample or the type of chemical solution used to dissolve ¹²⁹I source. The activity concentration of each ¹²⁹I source was determined by efficiency-extrapolation method for samples with an activity range of 0.28-4.5 kBq. The β-efficiency points were derived over 10 intervals by moving 3-PM tubes in fine steps of about 1 mm from the sample. The highest value for β-efficiency was 95%. The combined uncertainty were 0.25% and 0.26%, respectively. The stated precision obtained using the system is better than that previously reported in the literature obtained by the triple to double coincidence ratio (TDCR) or the CIEMAT/NIST efficiency tracing method.

Development of a movable 4πβ(LS)-γ coincidence counting system for activity standardization of β-γ emitters

A new movable 3PM-γ coincidence system, based on 4πβ(LS)-γ coincidence counting, for activity measurement of β-γ emitters has been designed at the Korea Research Institute of Standards and Science (KRISS). The system incorporates 3 PM tubes on the plane and two detectors placed above and below the center of the plane. The 3 PM tubes for β-counters in the plane are movable up to 100 mm from a liquid scintillation vial, thus enabling the variation of β-detection efficiencies by a geometrical technique. A NaI(Tl) γ-counter was set above for the present work. The β-event is determined by counting the logical sum of three double coincidences. All the necessary electronics, i.e., logical sum, adjusting the duration of dead-time of each counting channel and coincidence resolving times, and analyzing coincidence relation, were specially designed to be fabricated in an integrated circuit. Details of the detectors, the electronics, the overall movable 3PM-γ coincidence system are presented, as well as the results of investigations to assess its operating characteristics. Validation measurements have been performed with ⁶⁰Co and ⁵⁷Co sources. The highest β-detection efficiency achieved with ⁶⁰Co and ⁵⁷Co was 97% and 95%, respectively. The activity concentration determined with a new system agreed with calibrated values within the uncertainty range. Further results from validation measurements and the corresponding uncertainty budgets are presented.

Improved Measurements of the Physical Properties of Oriental Lacquers Using Atomic Force Microscopy and a Nanoindenter

Researchers have widely investigated Oriental lacquers to identify the chemical composition and have elucidated corresponding polymerization mechanisms using rigorous analytical techniques. However, researchers generally test the physical properties of Oriental lacquers by conventional methods that are perhaps overly simplistic. Here, we propose accurate and quantitative methods for evaluating the physical properties of Korean, Vietnamese, and Myanmarese lacquer films using atomic force microscopy (AFM), a nanoindenter, and a 90° peel tester. We obtained surface images of the lacquers in accordance with drying time using scanning electron microscopy and AFM. The Korean lacquer film exhibited fast hardening speed, enhanced hardness, and strong adhesion strength compared with the other lacquers, although the Myanmarese lacquer film had a smoother surface than the Korean lacquer film. We used our characterization approach for evaluating a mixed Korean/Myanmarese (50/50 w/w) lacquer. Our proposed measurement techniques for Oriental lacquer films provided results that agreed with qualitative results from conventional tests. Force–distance curves in AFM and force–displacement with nanoindenter for Oriental lacquer films showed more accurate and quantitative data on the mechanical properties. Thus, researchers will find our approach useful when they optimize the chemical compositions and improve the physical properties of Oriental lacquer films for industrial applications.

Highly sensitive colorimetric determination of nitrite based on the selective etching of concave gold nanocubes

Concave gold nanocubes are viable optical nanoprobes for the determination of nitrite ions. Herein, a novel approach was developed, based on the measurement of localized surface plasmon resonance absorption. The addition of nitrite ions selectively induced the etching of concave gold nanocubes, abrading the sharp vertices to spherical corners, which resulted in blue-shifted absorption accompanied by a color change from sapphire blue to light violet. The mechanism of selective etching of concave gold nanocube tips was elucidated by using X-ray photoelectron spectroscopy and atom probe tomography. The optimized detection of NO₂^- via the concave gold nanocube-based probe occurred at pH 3.0 and in 20 mM NaCl concentration at 40 °C. The absorption ratios (A_{550 nm}/A_{640 nm}) were proportional to the NO₂^- concentrations in the range 0.0-30 μM, with a detection limit of 38 nM (limit of quantitation of 0.12 μM and precision of 2.7%) in tap water. The highly selective and sensitive colorimetric assay has been successfully applied to monitor the nitrite ion concentrations in spiked tap water, pond water, commercial ham, and sausage samples.

Successive Detection of Zinc Ion and Citrate Using a Schiff Base Chemosensor for Enhanced Prostate Cancer Diagnosis in Biosystems

Sensitive and quantitative detection of prostate cancer (PC) requires a chemosensor with an applicable sensing strategy. A star-shaped Schiff base triaminoguanidine-integrated thiophene fluorophore TAT was rationally designed with nitrogen and sulfur atoms to coordinate with Zn²⁺ as the initial step and to chelate with citrate as the following step. Formation of the complex TAT-Zn²⁺ induced an intramolecular charge transfer and caused a red-shifted, Zn²⁺ concentration-dependent fluorescence at 507 nm. Chelation of TAT-Zn²⁺ with citrate led to an emission band at 692 nm upon an aggregation-induced emission mechanism. The distinctive fluorescence emissions of Zn²⁺ and citrate biomarkers were demonstrated first in on-site paper-based test strips showing gradually enhanced colors at yellow and red channels and second in both in vitro and in vivo by using PC3 cells and BALB/c nude mouse animal models, respectively. The in vitro test confirmed the mitochondria organelle-targeting property of TAT, and the in vivo performance manifested the successful application of the probe in recognizing the prostate cancer. This is the first applicable chemosensor that could be in continuous recognition of dual PC biomarkers Zn²⁺ and citrate in cancer diagnosis with a mitochondria organelle-targeting ability.

A dual colorimetric probe for rapid environmental monitoring of Hg2+ and As3+ using gold nanoparticles functionalized with d-penicillamine

A highly sensitive and selective colorimetric assay for the dual detection of Hg2+ and As3+ using gold nanoparticles (AuNPs) conjugated with d-penicillamine (DPL) was developed. When Hg2+ and As3+ ions coordinate with AuNP-bound DPLs, the interparticle distance decreases, inducing aggregation; this results in a significant color change from wine red to dark midnight blue. The Hg4f and As3d signals in the X-ray photoelectron spectra of Hg2+ (As3+)-DPL-AuNPs presented binding energies indicative of Hg2+-N(O) and As3+-N(O) bonds, and the molecular fragment observed in time-of-flight secondary ion mass spectra confirmed that Hg2+ and As3+ coordinated with two oxygen and two nitrogen atoms in DPL. The detection of Hg2+ and As3+ can be accomplished by observing the color change with the naked eye or by photometric methods, and this was optimized to provide optimal probe sensitivity. The assay method can be applied for environmental monitoring by first selectively quantifying Hg2+ in water samples at pH 6, then estimating the As3+ concentration at pH 4.5. The efficiency of the DPL-AuNP probe was evaluated for the sequential quantification of Hg2+ and As3+ in tap, pond, waste, and river water samples, and absorbance ratios (A 730/A 525) were correlated with Hg2+ and As3+ concentrations in the linear range of 0-1.4 μM. The limits of detection in water samples were found to be 0.5 and 0.7 nM for Hg2+ and As3+, respectively. This novel probe can be utilized for the dual determination of Hg2+ and As3+, even in the presence of interfering substances in environmental samples.

Erratum: Evolution of π^{0} Suppression in Au+Au Collisions from sqrt[s_{NN}]=39 to 200 GeV [Phys. Rev. Lett. 109, 152301 (2012)]

This corrects the article DOI: 10.1103/PhysRevLett.109.152301.

Evaluation and analysis of volatile organic compounds and formaldehyde emission of building products in accordance with legal standards: A statistical experimental study

Building materials have been developed mainly for thermal performance, strength, low energy consumption, and aesthetics. Consequently, large amounts of chemicals have been added to building products, resulting in the release of abundant pollutants that adversely affect human health. In particular, pollutants from the materials used to build modern dwellings can cause sick house syndrome, which leads to health resilience problems and diseases. In this study, more than 100 investigations were conducted annually from 2004 to 2017 by using the 20 L small chamber method to analyze the contents of formaldehyde (HCHO) and total volatile organic compounds (TVOC) released from 2780 building products in total. High emissions were released by some building components with raw materials containing hazardous chemicals. However, since the 2004 enactment of a legal standard for the regulation of emissions of harmful substances in building products, the pollutant emissions have tended to decrease over the years. As a result of the experiment, all 2780 building materials met the legal standard on average. Therefore, legal restrictions on the release of hazardous materials from building products have achieved reductions in pollutant emissions.

The primary system for measurement of beta emitting radioactive gases at KRISS

Korea Research Institute of Standards and Science (KRISS) is developing a length-compensated proportional counting (LCPC) system as a primary system for standardization of beta emitting radioactive gases. The pilot experiment was performed with ⁸⁵Kr and the optimized high voltage and pressure were found to be 1700 V and 0.203 MPa, respectively. The total activity of ⁸⁵Kr was deduced by the length compensation of each count. The expanded uncertainty was estimated to be around 0.8% (k = 2) for the ⁸⁵Kr measurement.

Design of optimal digital filter and digital signal processing for a CdZnTe high resolution gamma-ray system

We have developed an online digital signal processing system based on an FPGA. The system consists of pile-up rejection, baseline restorer, peak detection and pole-zero cancellation for evaluation of deposited energy in the detector. The shaping algorithm employed is a Moving Window Deconvolution (MWD) to shape digitized data into a trapezoidal form. For the purpose of verification, the developed digital system was tested for ¹³⁷Cs gamma rays. The entire system is programmed using the LabVIEW environment.

ToF-SIMS and AFM Characterization of Brown Cosmetic Contact Lenses: From Structural Analysis to the Identification of Pigments

Over the years, soft contact lenses for vision correction and cosmetic and therapeutic purposes have been greatly improved. For cosmetic contact lenses, the pigments need to be nontoxic, and the position of the pigment layer is particularly important because of the risks posed by pigment elution and the roughness of the lens surface. In this paper, we characterized the properties of brown cosmetic contact lenses made by three different manufacturers using surface analytical techniques. The surface topographies of the noncolored and colored parts were obtained by atomic force microscopy (AFM), and the position and composition of the pigment layer were determined by analyzing the cross section of the contact lenses using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The influence of pigment location on surface roughness was also examined. In addition, to find the method of the evaluation for the risk of surface elution of the pigments in the colored parts, the mass spectra and ion images of the surfaces were obtained by time-of-flight secondary ion mass spectrometry (ToF-SIMS) with a new sample preparation. From the ToF-SIMS spectra, we observed specific fragment ions of the poly(hydroxyethyl methacrylate) (PHEMA) polymer and found differences in the composition of the pigment layer depending on the manufacturers. The cross-sectioned image and 3D chemical characterizations of metallic and specific ions in the brown cosmetic contact lenses clearly indicated the spatial distribution and location of the pigment layer that can be used for the evaluation of pigment elution.

Association between time to treatment and functional outcomes according to the Diffusion-Weighted Imaging Alberta Stroke Program Early Computed Tomography Score in endovascular stroke therapy

BACKGROUND AND PURPOSE

The rate at which the chance of a good outcome of endovascular stroke therapy (EVT) decays with time when eligible patients are selected by baseline diffusion-weighted magnetic resonance imaging (DWI-MRI) and whether ischaemic core size affects this rate remain to be investigated.

METHODS

This study analyses a prospective multicentre registry of stroke patients treated with EVT based on pretreatment DWI-MRI that was categorized into three groups: small [Diffusion-Weighted Imaging Alberta Stroke Program Early Computed Tomography Score (DWI-ASPECTS)] (8-10), moderate (5-7) and large (<5) cores. The main outcome was a good outcome at 90 days (modified Rankin Scale 0-2). The interaction between onset-to-groin puncture time (OTP) and DWI-ASPECTS categories regarding functional outcomes was investigated.

RESULTS

Ultimately, 985 patients (age 69 ± 11 years; male 55%) were analysed. Potential interaction effects between the DWI-ASPECTS categories and OTP on a good outcome at 90 days were observed (P_interaction  = 0.06). Every 60-min delay in OTP was associated with a 16% reduced likelihood of a good outcome at 90 days amongst patients with large cores, although no associations were observed amongst patients with small to moderate cores. Interestingly, the adjusted rates of a good outcome at 90 days steeply declined between 65 and 213 min of OTP and then remained smooth throughout 24 h of OTP (P_nonlinearity  = 0.15).

CONCLUSIONS

Our study showed that the probability of a good outcome after EVT nonlinearly decreased, with a steeper decline at earlier OTP than at later OTP. Discrepant effects of OTP on functional outcomes by baseline DWI-ASPECTS categories were observed. Thus, different strategies for EVT based on time and ischaemic core size are warranted.

Beam Energy and Centrality Dependence of Direct-Photon Emission from Ultrarelativistic Heavy-Ion Collisions

The PHENIX collaboration presents first measurements of low-momentum (0.4<p_{T}<3  GeV/c) direct-photon yields from Au+Au collisions at sqrt[s_{NN}]=39 and 62.4 GeV. For both beam energies the direct-photon yields are substantially enhanced with respect to expectations from prompt processes, similar to the yields observed in Au+Au collisions at sqrt[s_{NN}]=200. Analyzing the photon yield as a function of the experimental observable dN_{ch}/dη reveals that the low-momentum (>1  GeV/c) direct-photon yield dN_{γ}^{dir}/dη is a smooth function of dN_{ch}/dη and can be well described as proportional to (dN_{ch}/dη)^{α} with α≈1.25. This scaling behavior holds for a wide range of beam energies at the Relativistic Heavy Ion Collider and the Large Hadron Collider, for centrality selected samples, as well as for different A+A collision systems. At a given beam energy, the scaling also holds for high p_{T} (>5  GeV/c), but when results from different collision energies are compared, an additional sqrt[s_{NN}]-dependent multiplicative factor is needed to describe the integrated-direct-photon yield.

A unified multidisciplinary fragility hip fracture pilot pathway in a trauma centre in Hong Kong: One-year outcome in the acute phase

Introduction:

The growing impact of fragility hip fracture (FHF) on the healthcare system and the society has become a major concern worldwide. A unified multidisciplinary FHF pathway from admission to rehabilitation and back to community was established in 2015. The acute phase of the pathway was put into pilot in our hospital to evaluate the outcome.

Method:

A designated FHF team was established in our centre since January 2015. The FHF pathway was piloted since June 2015. Patients admitted with a hip fracture resulting from fall on standing height were included. Major outcome parameters were compared in three phases: (1) before FHF team and FHF pathway (January to December 2014), (2) after FHF team but before FHF pathway (January to May 2015) and (3) after FHF team and FHF pathway (June 2015 to May 2016).

Result:

In phases 1, 2 and 3, 631, 263 and 634 patients were included, respectively. From phases 1 to 3, the average key performance indicator (KPI) has improved from 49.2% to 65.8% to 70.0% significantly; average acute length of stay (days) has improved from 13.7 to 13.4 to 11.3 significantly; total surgical complication rates have improved from 6.2% to 7.6% to 5.8%. The 30-day mortality rate and the unplanned readmission rate (within 28 days) have remained below 2.7% and 2.2%, respectively.

Conclusions:

Implementation of an FHF pathway can form a multidisciplinary platform that can improve the standard of care and outcome for our FHF patients in terms of KPI and also length of stay.

New knowledge added by this study:

A newly designed and implemented fragility hip fracture pathway in our centre as a pilot with the results evaluated.

Implications for clinical practice or policy:

With the increasing elderly population in Hong Kong and globally, there is a need to design and implement a fragility hip fracture (FHF) pathway to improve the care and effectiveness for FHF patients.

Rapid-Response and Highly Sensitive Boronate Derivative-Based Fluorescence Probe for Detecting H2O2 in Living Cells

Intracellular H2O2 monitoring is important and has driven researchers to pursue advancements for the rapid identification of H2O2, since H2O2 is short-lived in cell lines. An arylboronate derivative has been investigated as a chemospecific fluorescence recognition agent for H2O2. Triphenylimidazoleoxadiazolephenyl (TPIOP) boronate was contrived as a novel candidate for the rapid and sensitive recognition of H2O2. The probe was conjugated using the TPIOP functional group acting as an excellent fluorescent enhancer. The TPIOP group stimulated the polarization of C-B bond due to its extended π-conjugation, which included heteroatoms, and induced the production of rapid signal because of the highly polar C-B bond along with the corresponding boronate unit. While H2O2 reacts with TPIOP boronate, its nucleophilic addition to the boron generates a charged tetrahedral boronate complex, and then the C-B bond migrates toward one of the electrophilic peroxide oxygen atoms. The resulting boronate ester is then hydrolyzed by water into a phenol, which significantly enhances fluorescence through aggregation-induced emission. The TPIOP boronate probe responded to H2O2 rapidly, within 2 min, and exhibited high sensitivity with a limit of detection of 8 nM and a 1000-fold selectivity in the presence of other reactive oxygen species. Therefore, the developed TPIOP boronate chemodosimeter was successfully utilized to visualize and quantify intracellular H2O2 from human breast cancer (MCF-7) cells, as well as gaseous and aqueous H2O2 from environmental samples using Whatman paper strips coated with TPIOP boronate.

Abstract P3-03-31: Is sentinel lymph node biopsy necessary in all patients with early breast cancer?

Background and objectives : Since the results of the American College of Surgeons Oncology Group Z0011 published, the criteria for applying axillary lymph node (ALN) dissection was relaxed among early breast cancer patients who were scheduled for breast conserving surgery, adjuvant chemotherapy therapy, and adjuvant radiation therapy. SLNB criteria may be established if pathologic nodal status can be predicted. The aim of this study was to develop a nomogram for preoperative prediction of axillary node metastasis.

Methods: The records of 1650 patients with T1, T2 primary invasive breast cancer who were treated between January 2013 and September 2016 were selected from the medical database of Yonsei University (Seoul, South Korea). Those whom a preoperative diagnosis of axillary node metastases were excluded. Two nomogram that predicted three or more axillary metastasis and one or more axillary metastasis were developed using a binary logistic regression model with a training cohort. Internal validation was carried out adopting bootstrap method by validation cohort 500 times resampling.

Result: A total of 82 (4.8%) patients had three or more ALNs metastasis. Three hundred seventy five (17.4%) patients had one or more ALNs metastasis. Axillary metastasis was associated with Preoperative ALN suspicious image findings, clinical tumor size, Number of neoplastic foci, estrogen receptor status, Ki-67 expression, tumor marker. The nomogram was developed based on the clinical and statistically significant predictors. It had good discrimination performance (AUC 0.79, 95% CI, 0.73–0.85), (AUC 0.71, 95% CI, 0.67–0.74) and calibration fit.

Conclusion:Our nomogram might help predict the ALN metastasis in breast cancer patients. Patients with a low probability of ALN metastasis could be spared SLNB.

Citation Format: Yoon KH, Lee KB, Lee H, Lee J, Kim JY, Park HS, Park S, Kim SI, Cho YU, Park B-W. Is sentinel lymph node biopsy necessary in all patients with early breast cancer? [abstract]. In: Proceedings of the 2018 San Antonio Breast Cancer Symposium; 2018 Dec 4-8; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2019;79(4 Suppl):Abstract nr P3-03-31.

Abstract OT2-01-03: A prospective pilot study of simultaneous robotic assisted nipple sparing mastectomy and immediate reconstruction

Endoscopic breast surgery was expected to be an adequate technique to complete cancer clearance and preservation of the patient's body image. However, this technique has limitations including incomplete internal movements and unstable vision of a two dimensional camera due to inflexible endoscopic instruments especially during the skin flap formation. High resolution, ten-fold image magnification, and three-dimensional optics of robotic surgery help overcome the limitations of endoscopic surgery, and thus robotic surgery has been adopted in a wide range of intracorporeal procedures including breast surgery. However, few studies have evaluated feasibility and safety of robotic assisted nipple sparing mastectomy (RANSM) and immediate breast reconstruction (IBR) for the treatment of breast cancer. There were not any investigation to assess patients' satisfaction of cosmetic effect after performing RANSM and IBR. This study is aim to verify the feasibility and the safety of RANSM and IBR and to analyze cosmetic effect of the procedure and satisfaction of patients. The target number of enrollments is 15 patients. Patients who are diagnosed with early breast cancer or BRCA 1/2 mutation carriers are enrolled. Female patients over 20 years old who are candidates to preserve nipple areolar complex and considered to perform reconstruction with implants are prospectively collected. Written informed consents are mandatory. Patients who are considered the high possibility of postoperative radiation therapy according to preoperative stage are not included in this study. We exclude patients who want to undergo other methods of breast reconstruction than breast reconstruction with implants. Patients will undergo RANSM and IBR through a single axillary skin incision simultaneously. Regular follow-up at 1 month and 6 months after RANSM and IBR is scheduled to record recovery of a patient, amount of a drain, date of drain removal, and postoperative complications. Patient satisfaction questionnaire will be completed on the last follow-up day. To evaluate the safety of robotic assisted surgery, the oncologic safety (margin status of nipple areolar complex), postoperative recovery of a patient, and postoperative complications are investigated. We compare preoperative and postoperative 6 month photographs of patients and estimate the surgical outcome by objective indicators to evaluate the cosmetic grading by plastic surgeons. Patients' satisfaction are assessed by questionnaire (BREAST-Q) at the 6-month visit.

Citation Format: Lee J, Park HS, Kim JH, Lee DW, Song SY, Lew DH, Kim JY, Kim SI, Cho YU, Lee H, Lee KB, Yoon KH. A prospective pilot study of simultaneous robotic assisted nipple sparing mastectomy and immediate reconstruction [abstract]. In: Proceedings of the 2018 San Antonio Breast Cancer Symposium; 2018 Dec 4-8; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2019;79(4 Suppl):Abstract nr OT2-01-03.

Quantitative Analysis and Band Gap Determination for CIGS Absorber Layers Using Surface Techniques

Recently, Cu(In _X Ga_(1-X))Se₂ (CIGS) absorber layers have been extensively studied by many research groups for thin-film solar cell technology. CIGS material is particularly promising due to its exceptionally high absorption coefficient and large band gap range, which is adjustable as a function of alloy stoichiometry. To enhance the conversion performance of CIGS solar cells, understanding the CIGS structure and composition is a crucial challenge. We conducted a quantitative study to determine the bulk composition of the major elements such as Cu, In, Ga, and Se of four different CIGS photovoltaic cells. The compositional information was obtained by X-ray fluorescence (XRF), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and femtosecond laser ablation inductively coupled plasma mass spectrometry (fs-LA-ICP-MS). Then, the XRF concentration ratio was compared with the intensity ratio of fs-LA-ICP-MS to investigate the potential of accurate and rapid analysis using the fs-LA-ICP-MS technique. In contrast to the bulk information, the surface techniques can supply detailed information about the chemical composition across the depth profile. Here, elemental depth distributions of CIGS thin films were investigated using magnetic sector secondary ion mass spectrometry (SIMS) and Auger electron spectroscopy (AES). The atomic distributions of four different CIGS absorber layers exhibited a good agreement although they were obtained using two different surface instruments, AES and SIMS. Comparative analysis results of different CIGS absorber layers using SIMS, AES, and fs-LA-ICP-MS provide us with the appropriate technique for the information of accurate composition in a rapid analysis time. Thanks to a simple approach using the Ga/(In + Ga) ratio, the optical band gap energy of the Cu(In _X Ga_(1-X))Se₂ quaternary layer was monitored in the entire CIGS layer. The elemental distribution and the band gap determination were then used to elucidate their relationship to the corresponding CIGS cell efficiency result.

Investigation of Surface Properties of Fluorocarbon Films Produced Using Plasma Techniques

Different fluorocarbon thin films were deposited on Si substrates using two different plasma polymerization methods. Fluorine-containing hydrophobic thin films were obtained using inductively coupled plasma (ICP) and capacitively coupled plasma (CCP) with a mixture of fluorocarbon precursors (C2F6, C3F8, or c-C4F8) and an unsaturated hydrocarbon (C2H2). Different process parameters for plasma polymerization (e.g., processing time) were used to generate various fluorocarbon thin films. The hydrophobic properties and mechanical properties of the new products were measured using a profilometer, water contact angle measurements, pencil hardness, and a 90° peel test. The chemical compositions of the fluorocarbon thin films were characterized using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR). The water contact angle results showed that the ICP technique provides a more hydrophobic surface compared to the CCP technique. XPS and FT-IR analyses indicated that the ICP technique generated more fluorine-related functional groups (i.e., CF-CFn, CF2, and CF3) in the surface region, while the CCP technique produced fewer fluorine-containing functional groups. However, the fluorocarbon thin films produced using the CCP technique showed greater adhesive strength than did the fluorocarbon thin films produced using the ICP technique. These results are useful to establish the optimal condition for the fabrication of fluorocarbon films and to develop the device in bio-sensing applications.

Complementary Characterization of Cu(In,Ga)Se₂ Thin-Film Photovoltaic Cells Using Secondary Ion Mass Spectrometry, Auger Electron Spectroscopy, and Atom Probe Tomography

To enhance the conversion performance of solar cells, a quantitative and depth-resolved elemental analysis of photovoltaic thin films is required. In this study, we determined the average concentration of the major elements (Cu, In, Ga, and Se) in fabricated Cu(In,Ga)Se2 (CIGS) thin films, using inductively coupled plasma atomic emission spectroscopy, X-ray fluorescence, and wavelengthdispersive electron probe microanalysis. Depth profiling results for CIGS thin films with different cell efficiencies were obtained using secondary ion mass spectrometry and Auger electron spectroscopy to compare the atomic concentrations. Atom probe tomography, a characterization technique with sub-nanometer resolution, was used to obtain three-dimensional elemental mapping and the compositional distribution at the grain boundaries (GBs). GBs are identified by Na increment accompanied by Cu depletion and In enrichment. Segregation of Na atoms along the GB had a beneficial effect on cell performance. Comparative analyses of different CIGS absorber layers using various analytical techniques provide us with understanding of the compositional distributions and structures of high efficiency CIGS thin films in solar cells.

Results of an international comparison of activity measurements of 68Ge

An international key comparison, identifier CCRI(II)-K2.Ge-68, has been performed. The National Institute of Standards and Technology (NIST) served as the pilot laboratory, distributing aliquots of a 68Ge/68Ga solution. Results for the activity concentration, CA, of 68Ge at a reference date of 12h00 UTC 14 November 2014 were submitted by 17 laboratories, encompassing many variants of coincidence methods and liquid-scintillation counting methods. The first use of 4π(Cherenkov)β-γ coincidence and anticoincidence methods in an international comparison is reported. One participant reported results by secondary methods only. Two results, both utilizing pure liquid-scintillation methods, were identified as outliers. Evaluation using the Power-Moderated Mean method results in a proposed Comparison Reference Value (CRV) of 621.7(11)kBqg-1, based on 14 results. The degrees of equivalence and their associated uncertainties are evaluated for each participant. Several participants submitted 3.6mL ampoules to the BIPM to link the comparison to the International Reference System (SIR) which may lead to the evaluation of a Key Comparison Reference Value and associated degrees of equivalence.

Evaluation of abundance of artificial radionuclides in food products in South Korea and sources

Food samples are collected nationwide from January 2016 to February 2017 and their contents of artificial radionuclides are measured to address the growing concerns regarding the radioactive contamination of food products in Korea. Specifically, 900 food samples are collected for this study and their contents of representative artificial radionuclides ¹³⁴Cs, ¹³⁷Cs, ^239,240Pu, and ⁹⁰Sr are analyzed. The analysis shows that the activity concentrations of ¹³⁷Cs in fish range from minimum detectable activity (MDA) to 340 mBq/kg of fresh weight. The concentration factor (CF) determined for ¹³⁷Cs as a measure of its bioavailability is calculated to be ca. 74 and found to be very similar to that (100) recommended by the International Atomic Energy Agency. With an MDA of <0.221 mBq/kg, the results reveal that ^239,240Pu values in fish are below the MDA. The activity concentrations of ¹³⁷Cs and ⁹⁰Sr are lower than the MDA in both shellfish and seaweed, while the activity concentrations of ^239,240Pu in shellfish range from 0.26 to 2.18 mBq/kg, and for seaweed samples range from 2.07 to 3.38 mBq/kg. The atom ratios of ²⁴⁰Pu/²³⁹Pu in shellfish caught at the Korean coast vary from 0.209 to 0.237, with a mean of 0.227. The higher ²⁴⁰Pu/²³⁹Pu atom ratio determined in shellfish is thought to be caused by the plutonium transported from the Pacific Proving Grounds rather than other sources such as the Fukushima nuclear power plant accident. The activity concentrations of ¹³⁷Cs in mushrooms are found to vary from 1.0 to 21.4 Bq/kg, with the highest concentrations observed in the Oak (shiitake) and Sarcodon asparatus. ¹³⁴Cs is detected in three mushroom specimens collected from Jeju Island and about 3-3.6% of ¹³⁷Cs present in the wild mushrooms native to the Jeju Island are introduced as a result of the Fukushima nuclear plant accident. The annual effective doses of ¹³⁷Cs received through consumption of mushrooms and fish are 2.0 × 10^-4 mSv yr^-1 and 3.9 × 10^-5 mSv yr^-1, and those values are negligible compared to the annual effective doses limit of 1 mSv yr^-1.

A Highly Sensitive and Selective Colorimetric Hg2+ Ion Probe Using Gold Nanoparticles Functionalized with Polyethyleneimine

A highly sensitive and selective colorimetric assay for the detection of Hg²⁺ ions was developed using gold nanoparticles (AuNPs) conjugated with polyethyleneimine (PEI). The Hg²⁺ ion coordinates with PEI, decreasing the interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry showed that the Hg²⁺ ion was bound to the nitrogen atoms of the PEI in a bidentate manner (N-Hg²⁺-N), which resulted in a significant color change from light red to violet due to aggregation. Using this PEI-AuNP probe, determination of Hg²⁺ ion can be achieved by the naked eye and spectrophotometric methods. Pronounced color change of the PEI-AuNPs in the presence of Hg²⁺ was optimized at pH 7.0, 50°C, and 300 mM·NaCl concentration. The absorption intensity ratio (A₇₀₀/A₅₁₄) was correlated with the Hg²⁺ concentration in the linear range of 0.003-5.0 μM. The limits of detection were measured to be 1.72, 1.80, 2.00, and 1.95 nM for tap water, pond water, tuna fish, and bovine serum, respectively. Owing to its facile and sensitive nature, this assay method for Hg²⁺ ions can be applied to the analysis of water and biological samples.

Systematic influences on the areas of peaks in gamma-ray spectra that have a large statistical uncertainty

A method is presented for calculating the expected number of counts in peaks that have a large relative peak-area uncertainty and appear in measured gamma-ray spectra. The method was applied to calculations of the correction factors for peaks occurring in the spectra of radon daughters. It was shown that the factors used for correcting the calculated peak areas to their expected values decrease with an increasing relative peak-area uncertainty. The accuracy of taking the systematic influence inducing the correction factors into account is given by the dispersion of the correction factors corresponding to specific peaks. It was shown that the highest accuracy is obtained in the peak analyses with the GammaVision and Gamma-W software.

Highly Sensitive Colorimetric Assay for Determining Fe3+ Based on Gold Nanoparticles Conjugated with Glycol Chitosan

A highly sensitive and simple colorimetric assay for the detection of Fe³⁺ ions was developed using gold nanoparticles (AuNPs) conjugated with glycol chitosan (GC). The Fe³⁺ ion coordinates with the oxygen atoms of GC in a hexadentate manner (O-Fe³⁺-O), decreasing the interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry showed that the bound Fe³⁺ was coordinated to the oxygen atoms of the ethylene glycol in GC, which resulted in a significant color change from light red to dark midnight blue due to aggregation. Using this GC-AuNP probe, the quantitative determination of Fe³⁺ in biological, environmental, and pharmaceutical samples could be achieved by the naked eye and spectrophotometric methods. Sensitive response and pronounced color change of the GC-AuNPs in the presence of Fe³⁺ were optimized at pH 6, 70°C, and 300 mM NaCl concentration. The absorption intensity ratio (A₇₀₀/A₅₁₀) linearly correlated to the Fe³⁺ concentration in the linear range of 0-180 μM. The limits of detection were 11.3, 29.2, and 46.0 nM for tap water, pond water, and iron supplement tablets, respectively. Owing to its facile and sensitive nature, this assay method for Fe³⁺ ions can be applied to the analysis of drinking water and pharmaceutical samples.

How well are we managing fragility hip fractures? A narrative report on the review with the attempt to setup a Fragility Fracture Registry in Hong Kong

INTRODUCTION

In setting up a disease registry for fragility fractures in Hong Kong, we conducted a retrospective systematic study on the management of fragility hip fractures. Patient outcomes were compared with the standards from our orthopaedic working group and those from the British Orthopaedic Association that runs a mature fracture registry in the United Kingdom.

METHODS

Clinical data on fragility hip fracture patients admitted to six acute major hospitals in Hong Kong in 2012 were captured. These included demographics, pre- and post-operative assessments, discharge details, complications, and 1-year follow-up information. Analysis was performed according to the local standards with reference to those from the British Orthopaedic Association.

RESULTS

Overall, 91.0% of patients received orthopaedic care within 4 hours of admission and 60.5% received surgery within 48 hours. Preoperative geri-orthopaedic co-management was received by 3.5% of patients and was one of the reasons for the delayed surgery in 22% of patients. Only 22.9% were discharged with medication that would promote bone health. Institutionalisation on discharge significantly increased by 16.2% (P<0.001). Only 35.1% of patients attended out-patient follow-up 1 year following fracture, and mobility had deteriorated in 69.9% compared with the premorbid state. Death occurred in 17.3% of patients within a year of surgery compared with 1.6% mortality rate in a Hong Kong age-matched population.

CONCLUSIONS

The efficiency and quality of acute care for fragility hip fracture patients was documented. Regular geri-orthopaedic co-management can enhance acute care. Much effort is needed to improve functional recovery, prescription of bone health medications, attendance for follow-up, and to decrease institutionalisation. A Fracture Liaison Service is vital to improve long-term care and prevent secondary fractures.

Chronic kidney disease and high eGFR according to body composition phenotype in adults with normal BMI

BACKGROUND AND AIMS

Body composition contributes to the risk of chronic kidney disease (CKD) and glomerular hyperfiltration. In adults with normal body mass index (BMI), the relationships of body composition with CKD and high estimated glomerular filtration rate (eGFR) are largely unknown.

METHODS AND RESULTS

We analyzed 10,734 adults from the Korean National Health and Nutrition Examination Survey (KNHANES), whose body mass index (BMI) was within the normal range (18.5-24.9 kg/m²). Body composition was categorized into four phenotypes (normal, sarcopenia alone, obesity alone, and sarcopenic obesity) based on appendicular lean mass index (ALMI) and total body fat percentage (TBF%) measured by dual-energy X-ray absorptiometry (DXA). We examined the relationship of CKD and high eGFR (eGFR ≥ 120 ml/min per 1.73 m²) with body composition phenotypes. Sarcopenia alone (14.3%), obesity alone (16.0%), and sarcopenic obesity (10.7%) were prevalent. The association between sarcopenia alone and eGFR was J-shaped, while that between sarcopenic obesity and eGFR was U-shaped. In multivariate logistic regression analysis compared with the normal phenotype, sarcopenic obesity had an elevated odds ratio (OR) for CKD (OR: 1.59, 95% CI: 1.16-2.19). Sarcopenia alone (OR: 1.87; 95% CI: 1.41-2.47) and sarcopenic obesity (OR: 2.37, 95% CI: 1.68-3.36) had elevated OR for high eGFR.

CONCLUSION

These findings suggest that decreased muscle mass and coexistence with excess adiposity show associations with CKD and high eGFR even in adults with normal BMI. Body composition measured by DXA could provide information on the relationship of body composition with CKD and high eGFR.

4-n-butylresorcinol enhances proteolytic degradation of tyrosinase in B16F10 melanoma cells

OBJECTIVE

4-n-butylresorcinol is a competitive inhibitor of tyrosinase and has been used as an antimelanogenic agent. However, its inhibition mechanism in intact cells is not fully understood. To elucidate the cellular mechanism, we compared in vitro and in vivo inhibitory effects of 4-n-butylresorcinol on tyrosinase activity.

METHODS

B16F10 melanoma cells were cultured in media containing α-MSH in the presence or absence of 4-n-butylresorcinol. Tyrosinase mRNA levels, protein levels and activity in B16F10 cells were compared by real-time PCR, immunostaining combined with western blot and colorimetric analysis, respectively. Melanin concentration was measured by colorimetry both in the cells and in the media. Tyrosinase glycosylation and proteolytic degradation were analysed by immunoblotting after cells were treated with Endo H/PNGase F and E64/proteasome inhibitors, respectively.

RESULTS

4-n-butylresorcinol inhibited tyrosinase activity and melanin synthesis more effectively in intact cells than in cell lysates. Western blotting and real-time RT-PCR showed that 4-n-butylresorcinol reduced protein levels, but not mRNA levels, of tyrosinase in B16F10 cells. 4-n-butylresorcinol showed no effect on the processing of tyrosinase glycosylation or on trafficking to melanosomes. However, treatment of B16F10 cells with E64 or proteasome inhibitor abrogated the 4-n-butylresorcinol-induced decrease of tyrosinase. Moreover, 4-n-butylresorcinol activated p38 MAPK, resulting in increased ubiquitination of tyrosinase.

CONCLUSION

4-n-butylresorcinol inhibits melanogenesis by enhancing proteolytic degradation of tyrosinase as well as competitive binding to tyrosinase. These findings will help to develop new, effective and safe chemicals for the treatment of hyperpigmentation disorders.

Inexplicable Outcome of Early Appearance of Hepatocellular Carcinoma in the Allograft After Deceased Donor Liver Transplantation: A Case Report

BACKGROUND

This case represents the earliest appearance of de novo HCC after liver transplantation (OLT) compared with cases of previously reported literatures.

CASE REPORT

A 45-year-old man underwent deceased donor OLT owing to decompensated liver cirrhosis. He had YMDD viral mutation and hepatitis B (HBV) and C (HCV) coinfection but no tumor was found in the liver on MRI before OLT. The donor was a healthy young female donor who was HCV and HBV negative. There was no tumor in the explant liver. After OLT, HCV RNA and hepatitis B surface antigen became undetectable with DNA-positive HBV. Nine months after OLT, a computed tomography (CT) scan was performed owing to abdominal pain, detecting a mass occupying the right lobe that depicted enhanced characteristics typical of HCC. The chest CT demonstrated metastatic lung nodules in the right basal lower lobe. Fluorescence in situ hybridization showed tumor cells from the recipient.

CONCLUSIONS

To the best of our knowledge, this is the first report of de novo hepatocellular carcinoma that has emerged within a short period of undergoing OLT.

A colorimetric probe to determine Pb(2+) using functionalized silver nanoparticles

A simple and sensitive colorimetric method for the determination of Pb(2+) ions in aqueous samples was developed using 1-(2-mercaptoethyl)-1,3,5-triazinane-2,4,6-trione (MTT) functionalized silver nanoparticles (MTT-AgNPs). The Pb(2+) ion acted as the metal center of the coordination complex, which formed N-Pb(2+)-O coordination bonds with the MTT-AgNPs, shortening the interparticle distance, and inducing aggregation of the MTT-AgNPs. This aggregation resulted in a dramatic color change from yellow to dark blue. Using this methodology, the concentration of Pb(2+) ions in environmental samples could be quantitatively detected with the naked eye or by using UV-vis spectrometry. Also, we found that the selectivity and sensitivity of detection were noticeably improved in the pH range of 7-8, at which a more obvious color change was observed. The absorption ratios (A625/A395) of the modified AgNP solution exhibited a linear correlation with Pb(2+) ion concentrations within the linear range of 0.1-0.6 μg mL(-1), and the limits of detection in tap and pond water were 0.02 and 0.06 μg mL(-1), respectively. This cost-effective sensing system allows for the rapid and facile determination of Pb(2+) ions in aqueous samples.

Various extraction methods for detection of bistrifluron residues in Asian pear using high-performance liquid chromatography: application to dissipation patterns under open-field conditions

The present study was carried out to develop an analytical method for the detection and quantification of bistrifluron, a benzoylphenylurea compound, in pear using high-performance liquid chromatography with UV detection. Samples were extracted using conventional, AOAC and EN quick, easy, cheap, effective, rugged and safe 'QuEChERS' methods. As expected, conventional and EN-QuEChERS methods gave higher recoveries than AOAC. In addition, interference around the analyte retention time was observed in the conventional method. Thus, the EN-QuEChERS method was selected and validated by studying various parameters, including linearity, limit of detection, limit of quantification (LOQ), recovery and precision. Linearity was excellent, with a correlation coefficient of 0.9998. Recovery rates at three spiking levels (0.05, 0.2 and 1 mg/kg) ranged from 73.76 to 98.66%. Intra- and inter-day precisions, expressed as relative standard deviations, were <6%. The LOQ of 0.05 mg/kg was considerably lower than the maximum residue limit (1 mg/kg) set by the Korean Ministry of Food and Drug Safety. The developed method was successfully applied to open-field pear samples, in which the target analyte was slowly dissipated (55% decline) over 14 days with a half-life of 10.19 days. Notably, the residue levels throughout the period of sample collection (14 days) were lower than the maximum residue limit, indicating that the residue was not hazardous for consumers. Copyright © 2016 John Wiley & Sons, Ltd.

Centrality-Dependent Modification of Jet-Production Rates in Deuteron-Gold Collisions at √[s(NN)]=200 GeV

Jet production rates are measured in p+p and d+Au collisions at sqrt[s_{NN}]=200  GeV recorded in 2008 with the PHENIX detector at the Relativistic Heavy Ion Collider. Jets are reconstructed using the R=0.3 anti-k_{t} algorithm from energy deposits in the electromagnetic calorimeter and charged tracks in multiwire proportional chambers, and the jet transverse momentum (p_{T}) spectra are corrected for the detector response. Spectra are reported for jets with 12<p_{T}<50  GeV/c, within a pseudorapidity acceptance of |η|<0.3. The nuclear-modification factor (R_{dAu}) values for 0%-100% d+Au events are found to be consistent with unity, constraining the role of initial state effects on jet production. However, the centrality-selected R_{dAu} values and central-to-peripheral ratios (R_{CP}) show large, p_{T}-dependent deviations from unity, challenging the conventional models that relate hard-process rates and soft-particle production in collisions involving nuclei.