Structural, thermodynamic, and magnetic properties of SrFe12O19 hexaferrite modified by co-substitution of Cu and Gd

A hard magnetic system of SrFe12O19 nanomaterial was modified according to the composition of Sr0.95Gd0.05Fe12-xCuxO19 with x = 0.0, 0.30, and 0.60 using the sol-gel technique. The structures of the samples were evaluated using X-ray diffraction (XRD) along with Rietveld refinement, and an M-type hexaferrite with a hexagonal structure was confirmed with a trace amount of the α-Fe2O3 phase. In addition, transmission electron microscopy (TEM) analysis revealed polycrystalline nanoplates in all samples. Furthermore, the bond structures of the octahedral and tetrahedral sites along with the thermodynamic properties of these ferrites were extracted from the FTIR spectra at room temperature. The Debye temperature (θD) decreased from 755.9 K to 749.3 K due to the co-substitution of Gd3+ at Sr2+ and Cu2+ at Fe3+. The magnetic hysteresis (M-H) measurements revealed that the coercivity decreased from 5.3 kOe to 1.5 kOe along with the highest magnetization saturation (Ms) of 65.2 emu g-1 for the composition Sr0.95Gd0.05Fe11.7Cu0.3O19, which is suitable for industrial application. The effect of local crystalline anisotropy in magnetization was explored using the law of approach to saturation (LAS). Finally, thermo-magnetization was recorded in the range from 400 K to 5 K for cooling under zero field and in the presence of a 100 Oe field, and magnetic transitions were tracked due to the introduction of the foreign atoms of Gd and Cu into SrFe12O19.

Exploration of the structural, vibrational, electronic, mechanical and thermal properties of Ru4Al3B2 and Ru9Al3B8: a DFT study

The structural, dynamical, electro-optical, mechanical, and thermal characteristics of the newly synthesized intermetallic compounds Ru4Al3B2 and Ru9Al3B8 have been studied under ambient and elevated pressure through density functional theory (DFT). The obtained lattice parameters of the compounds are consistent with the experimental values. The metallic character of these compounds is established by the band structure and density of states (DOS). The electronic charge density distribution and bond analysis imply that Ru4Al3B2 and Ru9Al3B8 have mainly both ionic and covalent bonding. The non-negative phonon dispersion frequency of the compounds reaffirms their dynamical stability. Both compounds are tough as well as have high melting points, and hence, can be applied in harsh conditions. Mechanical properties are significantly improved under pressure. Thermal barrier coating (TBC) is a possible field of application for both compounds. The different thermal properties such as the Debye temperature (ΘD), Grüneisen parameter (γ), melting temperature (Tm), minimum thermal conductivity (Kmin) and lattice thermal conductivity (κph) of these compounds have been studied to figure out the suitable application areas in thermally demanding situations. The pressure and temperature dependent bulk modulus (B) and other thermodynamic properties have also been analyzed, which suggested that the present compounds are strong candidates for device applications at high temperature and pressure. Owing to their high optical absorptivity and reflectivity in the UV region, they are also candidates for UV-based applications. Furthermore, they also have applicability in the fields of electronics, aviation, energy storage, and supercapacitor devices for their superior electronic, thermal and mechanical properties.

Effect of Ni doping on structure, morphology and opto-transport properties of spray pyrolised ZnO nano-fiber

Nano-fiber structure of ZnO and Ni doped ZnO (Ni:ZnO) transparent thin films have been deposited on glass substrate at 350 °C at an ambient atmosphere via spray pyrolysis technique. The structural, surface morphological and opto-electrical properties of ZnO and Ni doped ZnO thin films have been investigated. The XRD patterns show that the films are of polycrystalline in nature having preferential orientation (0 0 2) plane for ZnO changes to (1 0 1) by Ni doping in ZnO matrix. Optical study exhibits red shifting in band gap energy with Ni doping due to sp-d hybridization and display high absorption coefficient of the order of 107 m-1. The photoluminescence (PL) spectra indicate blue emissions in all samples. Electrical measurement confirms the resistivity of the film decreases remarkably with Ni doping and electrical transport is mainly thermally activated. From Hall Effect study, it is confirmed that all the samples are n-type having carrier concentration of the order of 1018 cm-3. Both mobility and carrier concentrations of the films became higher than ZnO sample with the increase of Ni concentration.

Evaluation of a modified double-disc synergy test for detection of extended spectrum beta-lactamases in AMPC beta-lactamase-producing proteus mirabilis

The detection of extended-spectrum beta-lactamases (ESBLs) in gram-negative bacteria that produce AmpC beta-lactamases is problematic. In the present study, the performance of modified double-disc synergy test (MDDST) that employs a combination of cefepime and piperacillin-tazobactam for the detection of Proteus mirabilis producing extended spectrum and AmpC beta-lactamases was evaluated and compared with double-disc synergy test (DDST) and NCCLS phenotypic disc confirmatory test (NCCLS-PDCT). A total of 90 clinical isolates of P. mirabilis , which met the CLSI (Clinical and Laboratory Standards Institute) screening criteria that these had broth microdilution (BMD) MIC of > or =2 mg/mL for at least one extended spectrum cephalosporin [ceftazidime (CAZ), cefotaxime (CTX) and cefpodoxime], were selected for the study. MDDST detected ESBLs in 40/90 of the isolates, whereas DDST detected ESBLs in only 25 isolates. NCCLS-PDCT could detect ESBLs in 39 isolates using CAZ and CAZ + clavulanic acid (CLA) combination, whereas CTX and CTX + CLA combination could detect only 37 isolates as ESBL positive. As many as 34/40 ESBL positive isolates were confirmed to be AmpC beta-lactamase positive by the modified three-dimensional test (MTDT). MDDST and NCCLS-PDCT could detect ESBLs in all the 34 AmpC positive isolates, whereas DDST could detect ESBLs in only 19 isolates. The study demonstrated that MDDST is superior to DDST and as sensitive as NCCLS-PDCT. However, MDDST seems to have enhanced potential for the detection of ESBLs in AmpC beta-lactamase-producing P. mirabilis .