The interplay between trehalose and dextran as spray drying precursors for cationic liposomes

Successful oral delivery of liposomes requires formulations designed to withstand harsh gastrointestinal conditions, e.g., by converting to solid-state followed by loading into gastro-resistant delivery devices. The hypothesis was that the use of dextran-trehalose mixtures for spray drying would improve the rehydration kinetics of dried liposomes. The objectives were to determine the protective capacity of trehalose-dextran dehydration precursors and to increase the concentration of liposomes in the dry formulation volume. The study successfully demonstrated that 8.5% dextran combined with 76.5% trehalose protected CAF®04 liposomes during drying, with the liposome content maintained at 15% of the dry powder. Accordingly, the rehydration kinetics were slightly improved in formulations containing up to 8.5% dextran in the dry powder volume. Additionally, a 2.4-fold increase in lipid concentration (3 mM vs 7.245 mM) was achieved for spray dried CAF®04 liposomes. Ultimately, this study demonstrates the significance of trehalose as a primary carrier during spray drying of CAF®04 liposomes and highlights the advantage of incorporating small amounts of dextran to tune rehydration kinetics of spray-dried liposomes.

Effect of Drug Loading in Mesoporous Silica on Amorphous Stability and Performance

The encapsulation of drugs within mesoporous silica (MS) has for several years been a subject of research. Previous studies proposed that drug loadings up to the monomolecular loading capacity (MLC) are the optimal choice for maintaining the drug in an amorphous form, whereas filling the pores above the monolayer and up to the pore filling capacity (PFC) may introduce some physical instabilities. The aim of this study was to assess the effect of drug loading in MS-based amorphous formulations on the stability of the amorphous form of the drug as well as the dissolution. In particular, the following drug loadings were investigated: below MLC, at MLC, between MLC and PFC and at PFC. The drug-loaded MS formulations were analyzed directly after preparation and after 18 months of storage under accelerated conditions (40 °C in both dry and humid conditions). The MLC and PFC for the drug celecoxib (CEL) on the MS ParteckSLC500 (SLC) were determined at 33.5 wt.% and 48.4 wt.%, respectively. This study found that SLC can effectively preserve the amorphous form of the drug for 18 months, provided that the loading is below the PFC (<48.4 wt.%) and no humidity is present. On the other hand, drug loading at the PFC showed recrystallization even when stored under dry conditions. Under humid conditions, however, all samples, regardless of drug loading, showed recrystallization upon storage. In terms of dissolution, all freshly prepared formulations showed supersaturation. For drug loadings below PFC, a degree of supersaturation (DS) around 15 was measured before precipitation was observed. For drug loadings at PFC, the DS was found to be lower and only 6-times compared to the crystalline solubility. Lastly, for those samples that remained amorphous during storage for 18 months, the release profiles were found to be the same as the freshly loaded samples, with similar Cmax, Tmax and dissolution rate.

Microwave-Induced in Situ Drug Amorphization Using a Mixture of Polyethylene Glycol and Polyvinylpyrrolidone

The use of a mixture of polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) was investigated for microwave-induced in situ amorphization of celecoxib (CCX) inside compacts. Such amorphization requires the presence of a dipolar excipient in the formulation to ensure heating of the compact by absorption of the microwaves. Previously, the hygroscopic nature of PVP was exploited for this purpose. By exposing PVP-based compacts for set time intervals at defined relative humidity, controlled water sorption into the compacts was achieved. In the present study, PEG was proposed as the microwave absorbing excipient instead of water, to avoid the water sorption step. However, it was found that PEG alone melted upon exposure to microwave radiation and caused the compact to deform. Furthermore, CCX was found to recrystallize upon cooling in PEG-based formulations. Hence, a mixture of PEG and PVP was used, where the presence of PVP preserved the physical shape of the compact, and the physical state of the amorphous solid dispersion. To study the impact of the polymer mixture, different compact compositions of CCX, PEG and PVP were prepared. When exposing the compacts to microwave radiation, it was found that the PEG:PVP ratio was critical for in situ amorphization and that complete amorphization was only achieved above a certain temperature threshold.

The influence of drug and polymer particle size on the in situ amorphization using microwave irradiation

In this study, the impact of drug and polymer particle size on the in situ amorphization using microwave irradiation at a frequency of 2.45 GHz were investigated. Using ball milling and sieve fractioning, the crystalline drug celecoxib (CCX) and the polymer polyvinylpyrrolidone (PVP) were divided into two particle size fractions, i.e. small (<71 µm) and large (>71 µm) particles. Subsequently, compacts containing a drug load of 30% (w/w) crystalline CCX in PVP were prepared and subjected to microwave radiation for an accumulated duration of 600 sec in intervals of 60 sec as well as continuously for 600 sec. It was found that the compacts containing small CCX particles displayed faster rates of amorphization and a higher degree of amorphization during microwave irradiation as compared to the compacts containing large CCX particles. For compacts with small CCX particles, interval exposure to microwave radiation resulted in a maximum degree of amorphization of 24%, whilst a fully amorphous solid dispersion (100%) was achieved after 600 sec of continuous exposure to microwave radiation. By monitoring the temperature in the core of the compacts during exposure to microwave radiation using a fiber optic temperature probe, it was found that the total exposure time above the glass transition temperature (T_g) was shorter for the interval exposure method compared to continuous exposure to microwave radiation. Therefore, it is proposed that the in situ formation of an amorphous solid dispersion is governed by the dissolution of drug into the polymer, which most likely is accelerated above the T_g of the compacts. Hence, prolonging the exposure time above the T_g, and increasing the surface area of the drug by particle size reduction will increase the dissolution rate and thus, rate and degree of amorphization of CCX during exposure to microwave radiation.