Co-precipitation polymerization of dual functional monomers and polystyrene-co-divinylbenzene for ciprofloxacin imprinted polymer preparation

Novel ciprofloxacin composite imprinted materials are synthesized by using co-precipitation polymerization of dual functional monomers (methacrylic acid and 2-vinylpyridine) and polystyrene-co-divinylbenzene. The intermolecular interactions between monomers and template are evaluated by molecular modeling analysis. The physicochemical properties of the obtained polymers are characterized using FT-IR, TGA, and SEM. Batch adsorption experiments are used to investigate adsorption properties (kinetic, pH, and isotherm). These polymers are employed to prepare the solid phase extraction cartridges, and their extraction performances are analyzed by the HPLC-UV method. DFT calculations indicate that hydrogen bonding and π−π stacking are the driving forces for the formation of selective rebinding sites. The obtained polymers exhibit excellent adsorption properties, including fast kinetics and high adsorption capacity (up to 10.28 mg g⁻¹) with an imprinted factor of 2.55. The Scatchard analysis indicates the presence of specific high-affinity adsorption sites on the imprinted polymer. These absorbents are employed to extract CIP in river water with recoveries in the range of 65.97–119.26% and the relative standard deviation of 3.59–14.01%. Furthermore, the used cartridges could be reused at least eight times without decreasing their initial adsorption capacity.

Ciprofloxacin imprinted polymers were prepared using co-precipitation polymerization of methacrylic acid, 2-vinylpyridine and polystyrene-co-divinylbenzene.

Chitosan-Based Nanocomposites for Glyphosate Detection Using Surface Plasmon Resonance Sensor

This article describes an optical method based on the association of surface plasmon resonance (SPR) with chitosan (CS) film and its nanocomposites, including zinc oxide (ZnO) or graphene oxide (GO) for glyphosate detection. CS and CS/ZnO or CS/GO thin films were deposited on an Au chip using the spin coating technique. The characterization, morphology, and composition of these films were performed by Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and contact angle technique. Sensor preparation conditions including the cross-linking and mobile phase (pH and salinity) were investigated and thoroughly optimized. Results showed that the CS/ZnO thin-film composite provides the highest sensitivity for glyphosate sensing with a low detection limit of 8 nM and with high reproducibility. From the Langmuir-type adsorption model and the effect of ionic strength, the adsorption mechanisms of glyphosate could be controlled by electrostatic and steric interaction with possible formation of 1:1 outer-sphere surface complexes. The selectivity of the optical method was investigated with respect to the sorption of glyphosate metabolite (aminomethylphosphonic acid) (AMPA), glufosinate, and one of the glufonisate metabolites (3-methyl-phosphinico-propionic acid) (MPPA). Results showed that the SPR sensor offers a very good selectivity for glyphosate, but the competition of other molecules could still occur in aqueous systems.

Challenges in the application of microbial fuel cells to wastewater treatment and energy production: A mini review

Wastewater is now considered to be a vital reusable source of water reuse and saving energy. However, current wastewater has multiple limitations such as high energy costs, large quantities of residuals being generated and lacking in potential resources. Recently, great attention has been paid to microbial fuel cells (MFCs) due to their mild operating conditions where a variety of biodegradable substrates can serve as fuel. MFCs can be used in wastewater treatment facilities to break down organic matter, and they have also been analysed for application as a biosensor such as a sensor for biological oxygen which demands monitoring. MFCs represent an innovation technology solution that is simple and rapid. Despite the advantages of this technology, there are still practical barriers to consider including low electricity production, current instability, high internal resistance and costly materials used. Thus, many problems must be overcome and doing this requires a more detailed analysis of energy production, consumption, and application. Currently, real-world applications of MFCs are limited due to their low power density level of only several thousand mW/m². Efforts are being made to improve the performance and reduce the construction and operating costs of MFCs. This paper explores several aspects of MFCs such as anode, cathode and membrane, and in an effort to overcome the practical challenges of this system.

[Hepatectomy in intrahepatic lithiasis]

STUDY AIM

The aim of this study was to report the immediate results of a series of 65 hepatic resections for hepatolithiasis performed in Vietnam.

PATIENTS AND METHOD

From 1986 to 1998, 44 men and 21 women (mean age: 40 years) underwent hepatic resection for hepatolithiasis. Fourty patients had previously undergone one or several operations for hepatolithiasis. The procedure was performed on emergency in 25 patients. Indications for hepatic resection were: angiocholitis and liver abscess in 22 cases, stones closely inserted in the biliary duct in 20 cases, hemobilia in 12 cases, stones located above a biliary stricture in 8 cases and stones associated with a postoperative biliary fistula in 3 cases. Liver resections (minor in 61 patients, including 55 left lobectomies, and major in 4 patients) were performed through transhepatic approach according to the Ton That Tung technique and followed by an external biliary drainage with a Kehr tube.

RESULTS

There were 6 postoperative deaths (9%), 3 due to septic shock, 2 to cachexia, and 1 to liver failure. The 15 patients with complications recovered with conservative therapy. Bile infection was present in 93%, mostly with Escherichia coli and Enterobacter. Pigmented stones were usually found.

CONCLUSION

Vietnam is a country with high incidence of hepatolithlasis. Hepatic resection is an adequate treatment for localized intrahepatic bile duct stones when the involved segment including biliary strictures and calculi can be completely removed. The procedure may be performed on emergency for liver abscess, or hemobilia.

Poisson distribution of male mating success in laboratory populations of Drosophila melanogaster

Variation among males and females in reproductive success is a major determinant of effective population size. Most studies of male mating success in Drosophila, however, have been done under conditions very different from those in typical cultures. We determined the distribution of male mating success in five laboratory populations of D. melanogaster maintained on a 14 d, discrete generation cycle fairly representative of standard Drosophila cultures. Mating success was measured as the number of matings a male could achieve under conditions closely approximating a regular culture vial of these populations. Preliminary studies determined that most mating in these populations occurred within 14 h of the flies attaining sexual maturity. Consequently, individual virgin males were marked with white paint on their thorax, put into vials with varying numbers of unmarked virgin flies of both sexes, and monitored continuously for matings over a period of up to 14 h. At various times during the assay, virgin males and females were added to these vials in proportions simulating the pattern of eclosion in culture vials. The observed variation in the number of matings per male in the five populations was, by and large, consistent with a Poisson distribution, suggesting that male mating success in short-generation-time, discrete-generation laboratory cultures of D. melanogaster may fulfil a fundamental assumption of the Wright-Fisher model of genetic drift in finite populations.