Electrocoagulation in treatment of municipal wastewater- life cycle impact assessment

The purpose of this study is investigation of electrocoagulation (EC) as a treatment of municipal wastewater, integrating life cycle impact assessment (LCIA) for assessing its environmental performance of investigated treatment. The study evaluated the effectiveness of EC in removing physico-chemical and microbial parameters using aluminum (Al) and iron (Fe) electrodes in monopolar and bipolar modes. Bipolar arrangement of Al(-)/Al/Al/Al(+) electrodes achieved the highest removals: 70% COD, 72% BOD5 followed by complete elimination of total phosphorous, turbidity and microbial parameters. This treatment was subject to investigation of the influence of reaction time (t = 10-60 min) on removals at higher current density (CD = 3.33 mA/cm2). In order to reduce energy consumption, the same reaction time range was used with a reduced CD = 2.33 mA/cm2. Following removal efficiencies obtained: 47-72% COD (higher CD) and 53-78% (lower CD); 69-75% BOD5 (higher CD) and 55-74% CD (lower CD); 12-21% NH4- (higher CD) and 7-22% NH4- (lower CD). Total P, NO3- and NO2- compounds showed the same removals regardless the CD. Decrease in current density did not influence removals of total suspended matter, turbidity, salinity as well as microbial parameters. The bipolar arrangement of Al(-)/Al/Al/Al(+) electrodes, assuming a lower CD = 2.33 mA/cm2 and t = 30 min, was assessed with the Recipe 2016Midpoint (H) and USEtox v.2 LCIA methods to explore the environmental justification of using EC for wastewater treatment. The LCIA results revealed that the EC process significantly reduces water eutrophication and toxicity for freshwater and marine ecosystems, but has higher impacts in global warming, fossil fuel consumption, human toxicity, acidification, and terrestrial ecotoxicity due to high energy consumption. This can be mainly explained by the assumption in the study that the EC precipitate is dispersed to agricultural soil without any pre-treatment and material recovery, along with relatively high energy consumption during the process.

Eco-friendly nanoparticles: mechanisms and capacities for efficient removal of heavy metals and phosphate from water using definitive screening design approach

Can nano-zero-valent iron, synthesized using oak leaf extract, be the key solution for water preservation, efficiently removing heavy metal ions and phosphate anions simultaneously? This research unveils how this technology not only promises high efficiency in the remediation of water resources, but also sets new standards for environmentally friendly processes. The high antioxidant capacity and high phenol content indicate suggest the possibility of oak-nZVI synthesis using oak leaf extract as a stable material with minimal agglomeration. The simultaneous removal of Cd and phosphates, as well as and Ni and phosphates was optimized by a statistically designed experiment with a definitive screening design approach. By defining the key factors with the most significant impact, a more efficient and faster method is achieved, improving the economic sustainability of the research by minimizing the number of experiments while maximizing precision. In terms of significance, four input parameters affecting process productivity were monitored: initial metal concentration (1-9 mg L-1), initial ion concentration (1-9 mg L-1), pH value (2-10), and oak-nZVI dosage (2-16 mL). The process optimization resulted in the highest simultaneous removal efficiency of 98.99 and 87.30% for cadmium and phosphate ions, respectively. The highest efficiency for the simultaneous removal of nickel and phosphate ions was 93.44 and 96.75%, respectively. The optimization process fits within the confidence intervals, which confirms the assumption that the selected regression model well describes the process. In the context of e of the challenges and problems of environmental protection, this work has shown considerable potential and successful application for the simultaneous removal of Cd(II) and Ni(II) in the presence of phosphates from water.

Case presentation of the smallest non-functional parathyroid carcinoma and review of the literature

INTRODUCTION

Non functional parathyroid carcinoma (PC) is one of the rarest malignant neoplasms. Due to the lack of symptoms and laboratory findings, it is mostly diagnosed in late AQ2 stages, when local invasion and dissemination are already present. However, our case is an exception, because it was detected in early stage, with no local invasion present. We present a case of the smallest non-functional PC yet reported and review of the literature.

CASE PRESENTATION

A 47-year-old woman was admitted to outpatient Clinic where fine-needle aspiration biopsy (FNAB) of bilateral thyroid nodules (slide 1) and central neck mass (slide 2), which was suspected to be an enlarged lymphatic nodule or parathyroid gland was performed. Results came back as Bethesda I-colloid (slide 1), and Bethesda IV (slide 2), stating that it is hard to distinguish thyroid gland oxyphil lesions from parathyroid cells. Total thyroidectomy was performed as well as excision of the left central neck mass, without any involvement of surrounding structures. Pathological examination revealed bilateral thyroid follicular nodular disease, papillary microcarcinoma, and parathyroid carcinoma with vascular and capsular invasion, measuring 10 × 8 × 7 mm. The immunohistochemical profile included positive PTH, Chromogranin A, and negative TTF1.

CONCLUSION

Non-functional PC is usually diagnosed in advanced stages, already involving adjacent structures; however, this case presents a rare example. It is important not to exclude PC as a differential diagnosis in the absence of elevated Ca and PTH serum levels. Follow-up will be difficult, since there are no prognostic parameters to rely on.

Integrated application of green zero-valent iron and electrokinetic remediation of metal-polluted sediment

In recent years, more focus has been placed on integrated metal removal processes. Electrokinetic (EK) treatment is superior to other technologies because it can be applied to a variety of mediums. Green nanoparticles, on the other hand, have the potential to significantly reduce pollutant concentrations in a short period of time. In this study, we investigated the possibility of combining green zero-valent iron (nZVI) with EK on Cd and Zn-contaminated sediment. For green synthesis, extracts of dry leaves of mulberry (ML-nZVI) and oak (OL-nZVI) were used, both abundantly present in the Republic of Serbia. The results show that, despite the fact that their availability was greatly reduced, the metals were concentrated and stabilized to a significant extent in the middle of the EK cell (z/L 0.5) after all treatments. When the results were compared, OL-nZVI proved to be a more effective nanomaterial even with smaller doses of OL-nZVI, which is important in terms of achieving better economic benefits. This study identified green nano zero-valent iron as a powerful tool for metal removal when combined with electrokinetic (EK) treatment, which improves green nZVI longevity and migration. This study of the combined green nZVI-EK remediation treatment, in particular, will have an impact on future research in this field, given the achieved efficiency.

Recycling of polluted dredged sediment - Building new materials for plant growing

The worldwide concern is caused by a large quantity of dredged sediment. The issue becomes more severe when contaminated sediment has to be landfilled. Therefore, researchers involved in the dredged sediment management are increasingly motivated to improve circularity in sediment management processes. Prior to the dredged sediment usage in agriculture, its necessary to confirm conclusively its safety in the context of trace elements (TEs) levels. This study reports the use of different solidification/stabilization (S/S) sediment amendments (cement, clay, fly ash and green synthetized nano-zerovalent iron-nZVI) to remediate dredged sediment. The aim was to identify the effects of applied sediment S/S treatments on the growth and development of Brassica napus. The results showed that in all S/S mixtures TEs levels in the highly labile and bioavailable fraction were significantly decreased (less than 10%, while untreated sediment contained up to 36% of TEs). Simultaneously, the highest share of metals (69-92%) was in the residual fraction, which is considered as chemically stable and biologically inert fraction. Nevertheless, it was noticed that different S/S treatments trigger plants' functional traits indicating that plants' establishment in S/S treated sediment can be limited to certain extent. Besides, based on primary and secondary metabolites (elevated specific leaf area along with declined malondialdehyde content) it was concluded that Brassica plants employ a conservative resource use strategy aiming to buffer phenotypes against stress condition. Lastly, it was inferred that among all analyzed S/S treatments, green synthetized nZVI from oak leaves can effectively promote TEs stabilization in dredged sediment, concurrently enabling plant's establishment and fitness.

A cost effective method for immobilization of Cu and Ni polluted river sediment with nZVI synthesized from leaf extract

This study investigates the performance of oak (OL) and mulberry (ML) leaves for synthesized of nanoscale zero-valent iron (nZVI), in immobilizing Cu and Ni in contaminated sediment. Characterization of synthesized Fe nanoparticles from oak and mulberry leaf extracts demonstrated that they are nontoxic and stabile nanomaterials for application in the sediment remediation. Effectiveness of stabilization process was performed by microwave-assisted sequential extraction procedure (MWSE) and single-step leaching tests which have been applied to evaluate the metal extraction potential. This research showed that OL-nZVI and ML-nZVI were effective in transforming available Cu and Ni to stable fraction. The maximum residual percentage of Cu increased by 76% and 73%, and for Ni 81% and 80%, respectively, with addition of 5% OL-nZVI and 5% ML-nZVI. Used single-step leaching tests (Toxicity Characteristic Leaching Procedure-TCLP and German standard test- DIN) indicated that all stabilized samples can be considered as non-hazardous waste, as all leached metal concentrations met the appropriate set criteria. Cost analysis showed that the operating cost for contaminated sediment treatment with green synthesized nZVI are 50.37 €/m3/per year. This work provides a new insight into the immobilization mechanism and environmental impact of Cu and Ni in contaminated sediment and potential way of treatment with OL-nZVI and ML-nZVI. Generally, nZVI can be an effective and versatile tool for stabilization of sediment polluted with toxic metals.

Leachability and Microstructural Analysis of Clay and Lime Stabilized/Solidified Polluted Sediment – Long-Term Performance

The objective of this study is to enable a better understanding of the effectiveness of solidification/stabilization (S/S) technique in treating polluted sediment, and provide the much needed validation of the longevity of the technology. In this research kaolinite and montmorillonite, with a certain proportion of lime, were used for S/S treatment of sediment polluted with metals. Leachability of metals was examined using the toxicity characteristic leaching procedure (TCLP) and the German standard leaching test (DIN 3841-4 S4) prescribed in national legislative. Results indicated successful S/S treatment using both clays and lime, from the aspect of all leached metals even with pH variations over time and slight changes in structural integrity of specimens. X-ray diffraction (XRD), scanning electron microscope (SEM) analyses and porosity measurement were also performed on the prepared monolithic matrices. XRD qualitative and semi-quantitative analysis proved hydration and pozzolanic product formation with increase in their content and finer crystallites formation over time. SEM analysis confirmed the presence of morphologically dense and stable structures while pore size distribution indicated on mesoporous matrices with ongoing compaction over time. Generally, structural microanalysis indicated the formation of hardened matrices over time and hydration process has been fully completed and further carbonation took place. Unconfined compressive strength measurement gave the satisfying results and matured monolite with 30 % of montmorillonite and 10 % of lime can be considered potentially applicable as non-load-bearing material. In summary, all results indicated that this kind of S/S treatment can achieve satisfactory durability and represent reliable and economically feasible technique for long-term remediation of metal polluted sediment.

Remediation of Toxic Metal Contaminated Sediment Using Three Types of nZVI Supported Materials

Due to nZVI effectiveness in the removal of toxic metals as well as low-cost regarding its production, kaolinite, bentonite and carboxymethyl cellulose supported nZVI were chosen for in-situ remediation of river sediment. Small-scale laboratory studies have shown that the percentage of removed metal (Ni, Zn and Pb) ranged up to 80% depending on the nanomaterial used. The metal mobility in sediments was investigated using single extraction, which is proved to be better for quick estimation of metal mobility, and for highly contaminated sites both single and sequential extraction needs to be used. Risk assessment code indicated medium risk for Ni and high risk for Pb and Zn in untreated sediment. In-situ treatment in laboratory proved to be very effective, providing the choice of optimal doses of three different nanomaterials used towards the concentration of toxic metals in the sediment.