Bidirectional electrostatic MEMS-tunable VCSELs

Microelectromechanical system (MEMS) vertical cavity surface-emitting lasers (VCSELs) are the fastest coherently tunable lasers (nm/ns) due to their unique Doppler-assisted tuning mechanism. However, in standard electrostatic actuation, the response is highly nonlinear and large (>100 V) dynamic voltages are needed for MHz sweep rates. We present a bidirectional MEMS VCSEL as a solution to these challenges where static voltages can be used to enable substantially linear and amplified wavelength tuning with respect to the fast tuning (MEMS) voltage. Using an InP/SOI MEMS bonded structure, we show a tuning range of 54.5 nm (gain limited) centered around 1586 nm at an actuation frequency of 2.73 MHz.

Understanding the light induced hydrophilicity of metal-oxide thin films

Photocatalytic effects resulting in water splitting, reduction of carbon dioxide to fuels using solar energy, decomposition of organic compounds, and light-induced hydrophilicity observed on surfaces of various metal oxides (MOx), all rely on the same basic physical mechanisms, and have attracted considerable interest over the past decades. TiO2 and ZnO, two natively n-type doped wide bandgap semiconductors exhibit the effects mentioned above. In this study we propose a model for the photo-induced hydrophilicity in MOx films, and we test the model for TiO2/Si and ZnO/Si heterojunctions. Experimentally, we employ a wet exposure technique whereby the MOx surface is exposed to UV light while a water droplet is sitting on the surface, which allows for a continuous recording of contact angles during illumination. The proposed model and the experimental techniques allow a determination of minority carrier diffusion lengths by contact angle measurements and suggest design rules for materials exhibiting photocatalytic hydrophilicity. We expect that this methodology can be extended to improve our physical understanding of other photocatalytic surface effects.

Design of a robust photonic crystal mirror for MEMS VCSELs

Wavelength tunable lasers with narrow dynamic linewidths are essential in many applications, such as optical coherence tomography and LiDAR. In this letter, we present a 2D mirror design that provides large optical bandwidth and high reflection while being stiffer than 1D mirrors. Specifically, we investigate the effect of rounded corners of rectangles as they are transferred from the CAD to the wafer by lithography and etching.

Determining the gluonic gravitational form factors of the proton

The proton is one of the main building blocks of all visible matter in the Universe¹. Among its intrinsic properties are its electric charge, mass and spin². These properties emerge from the complex dynamics of its fundamental constituents-quarks and gluons-described by the theory of quantum chromodynamics^3-5. The electric charge and spin of protons, which are shared among the quarks, have been investigated previously using electron scattering². An example is the highly precise measurement of the electric charge radius of the proton⁶. By contrast, little is known about the inner mass density of the proton, which is dominated by the energy carried by gluons. Gluons are hard to access using electron scattering because they do not carry an electromagnetic charge. Here we investigated the gravitational density of gluons using a small colour dipole, through the threshold photoproduction of the J/ψ particle. We determined the gluonic gravitational form factors of the proton^7,8 from our measurement. We used a variety of models^9-11 and determined, in all cases, a mass radius that is notably smaller than the electric charge radius. In some, but not all cases, depending on the model, the determined radius agrees well with first-principle predictions from lattice quantum chromodynamics¹². This work paves the way for a deeper understanding of the salient role of gluons in providing gravitational mass to visible matter.

Measured proton electromagnetic structure deviates from theoretical predictions

The visible world is founded on the proton, the only composite building block of matter that is stable in nature. Consequently, understanding the formation of matter relies on explaining the dynamics and the properties of the proton's bound state. A fundamental property of the proton involves the response of the system to an external electromagnetic field. It is characterized by the electromagnetic polarizabilities¹ that describe how easily the charge and magnetization distributions inside the system are distorted by the electromagnetic field. Moreover, the generalized polarizabilities² map out the resulting deformation of the densities in a proton subject to an electromagnetic field. They disclose essential information about the underlying system dynamics and provide a key for decoding the proton structure in terms of the theory of the strong interaction that binds its elementary quark and gluon constituents. Of particular interest is a puzzle in the electric generalized polarizability of the proton that remains unresolved for two decades². Here we report measurements of the proton's electromagnetic generalized polarizabilities at low four-momentum transfer squared. We show evidence of an anomaly to the behaviour of the proton's electric generalized polarizability that contradicts the predictions of nuclear theory and derive its signature in the spatial distribution of the induced polarization in the proton. The reported measurements suggest the presence of a new, not-yet-understood dynamical mechanism in the proton and present notable challenges to the nuclear theory.

In situoff-axis electron holography of real-time dopant diffusion in GaAs nanowires

Off-axis electron holography was used to reveal remote doping in GaAs nanowires occurring duringin situannealing in a transmission electron microscope. Dynamic changes to the electrostatic potential caused by carbon dopant diffusion upon annealing were measured across GaAs nanowires with radial p-p+ core-shell junctions. Electrostatic potential profiles were extracted from holographic phase maps and built-in potentials (V_bi) and depletion layer widths (DLWs) were estimated as function of temperature over 300-873 K. Simulations in absence of remote doping predict a significant increase ofV_biand DLWs with temperature. In contrast, we measured experimentally a nearly constantV_biand a weak increase of DLWs. Moreover, we observed the appearance of a depression in the potential profile of the core upon annealing. We attribute these deviations from the predicted behavior to carbon diffusion from the shell to the core through the nanowire sidewalls, i.e. to remote doping, becoming significant at 673 K. The DLW in the p and p+ regions are in the 10-30 nm range.

[Further development of regional early care-Many roads lead to Rome : Developmental stages of four established rheumatological early care concepts in different regions of Germany]

In order to shorten the prognostically relevant waiting time until diagnosis and initiation of appropriate treatment in inflammatory rheumatic diseases, rheumatological centers in many regions across Germany have established and continuously developed specific early care concepts. Evaluated models from Altötting·Burghausen, Berlin Buch, Düsseldorf and Heidelberg and their developmental stages as a response to internal and external challenges are presented in this overview. The transparent publication of the developmental steps and the exchange of experiences aim at promoting new early care concepts in other regions and continuing the joint dialogue for improvement of the early detection and quality of care of inflammatory rheumatic diseases in Germany.

Deeply Virtual Compton Scattering Cross Section at High Bjorken x_{B}

We report high-precision measurements of the deeply virtual Compton scattering (DVCS) cross section at high values of the Bjorken variable x_{B}. DVCS is sensitive to the generalized parton distributions of the nucleon, which provide a three-dimensional description of its internal constituents. Using the exact analytic expression of the DVCS cross section for all possible polarization states of the initial and final electron and nucleon, and final state photon, we present the first experimental extraction of all four helicity-conserving Compton form factors (CFFs) of the nucleon as a function of x_{B}, while systematically including helicity flip amplitudes. In particular, the high accuracy of the present data demonstrates sensitivity to some very poorly known CFFs.

AB0752 HOW DOES TIME TO DIAGNOSIS AND GENDER AFFECT TREATMENT OUTCOMES IN PATIENTS WITH ANKYLOSING SPONDYLITIS OR PSORIATIC ARTHRITIS? – REAL WORLD DATA FROM THE GERMAN AQUILA STUDY WITH SECUKINUMAB

Background

In both, ankylosing spondylitis (AS) and psoriatic arthritis (PsA), women typically have a longer delay in diagnosis.1,2 There is scientific evidence that prognosis for AS and PsA improves when diagnosed early. The German non-interventional study AQUILA provides real-world data on the influence of time to diagnosis and gender on treatment outcomes under secukinumab, a fully human monoclonal antibody that selectively inhibits interleukin-17A.

Objectives

The aims of this interim analysis are to describe selected baseline (BL) demographics of AS and PsA patients (pts) and to evaluate the impact of time to diagnosis and gender on secukinumab treatment outcomes, such as disease activity and global functioning and health.

Methods

AQUILA is an ongoing, multi-center, non-interventional study including up to 3000 pts with AS or PsA. Pts were observed from BL up to week (w) 52 according to clinical routine. Real-world data were assessed prospectively and analyzed as observed. Validated questionnaires were used to collect data on disease activity (Bath Ankylosing Spondylitis Disease Activity Index, BASDAI), global functioning and health (Assessment of SpondyloArthritis-Health Index, ASAS-HI) in AS, and skin and joint-related disease activity (Psoriasis Area and Severity Index, PASI; tender/swollen joint counts, TJC/SJC) and impact of disease (Psoriatic Arthritis Impact of Disease - 12 items, PsAID-12 score) in PsA pts. This interim analysis focused on the subgroups of male and female AS and PsA pts stratified by time to diagnosis after disease onset (˂1 year [y] and ≥1y for early and late diagnosis, respectively).

Results

At BL, 609 AS and 1145 PsA pts were included with information on time to diagnosis (Table 1); only 18.7% of AS and 25.8% of PsA pts were diagnosed within one year. Of interest, both female AS and PsA pts as well as male PsA pts with increased BMI tended to be diagnosed later (Table 1). Regarding BASDAI scores, male AS pts diagnosed late had increased disease activity at BL and throughout the study (Figure 1A); female AS pts diagnosed late showed reduced total treatment effect with increasing time to diagnosis (Figure 1B). Similarly, both male and female AS pts diagnosed late had slightly increased ASAS-HI at BL and throughout the study (Table 1). For PsA pts, there was no difference in skin- (PASI, Figure 1C/D) and joint-related (Figure 1E/F) disease activity with respect to time to diagnosis. Furthermore, there was no difference in PsAID scores (data not shown) between early- and late-diagnosed PsA pts.

Table 1.

Overview of selected BL characteristics in AS and PsA pts stratified by time to diagnosis

AS (N=609)Time to diagnosis ˂1 year (n=114)Time to diagnosis ≥1 year (n=495)Male (n=63)Female (n=51)Male (n=301)Female (n=194)Age, years43.146.345.947.7BMI27.725.927.327.8BASDAI4.75.05.35.2ASAS-HI6.78.07.48.2PsA (N=1145)Time to diagnosis ˂1 year (n=295)Time to diagnosis ≥1 year (n=850)Male (n=126)Female (n=169)Male (n=363)Female (n=487)Age, years50.151.852.353.1BMI28.729.429.328.8PASI6.56.27.07.2PsAID4.65.24.85.3TJC/SJC5.9/3.37.3/3.27.0/3.77.3/3.8

All variables given as mean

Figure 1.

Disease activity in early- and late-diagnosed AS and PsA pts

Conclusion

In a real-world setting, secukinumab improved disease activity and global functioning in both AS and PsA pts. Both, male and female AS pts had a higher treatment response when diagnosed early. Interestingly, delay in diagnosis appeared to be BMI-dependent in female AS pts and PsA pts of both genders. However, in contrast to AS, treatment response of early- and late-diagnosed PsA pts did not differ in the further course.

References

[1]Rusman, T., van Bentum, R.E. & van der Horst-Bruinsma, I.E. Rheumatology59, iv38-iv46 (2020). 2. Passia, E., et al. OP0057. Annals of the Rheumatic Diseases79, 38-39 (2020).

Disclosure of Interests

Karolina Benesova Speakers bureau: Abbvie, BMS, Gilead/Galapagos, Janssen, Lilly, Medac, MSD, Novartis, Roche, Viatris, Consultant of: Gilead/Galapagos, Novartis, Grant/research support from: Abbvie, Novartis, Oliver Hansen Grant/research support from: Novartis, Uta Kiltz Consultant of: AbbVie, Amgen, Biogen, Chugai, Eli Lilly, Gilead, GSK, Grünenthal, Hexal, Janssen, MSD, Novartis, Pfizer, Roche, UCB, Grant/research support from: AbbVie, Amgen, Biogen, Chugai, Eli Lilly, Gilead, GSK, Grünenthal, Hexal, Janssen, MSD, Novartis, Pfizer, Roche, UCB, Jan Brandt-Juergens Consultant of: Abbvie, Affibody, BMS, Gilead, Janssen, Lilly, Medac, MSD, Novartis, Pfizer, Roche, Sanofi-Aventis, UCB, Peter Kästner Consultant of: Chugai, Novartis, Elke Riechers Consultant of: AbbVie, Chugai, Novartis, UCB, Grant/research support from: AbbVie, Chugai, Novartis, UCB, Pfizer, Daniel Peterlik Employee of: Novartis, Christina Budden Employee of: Novartis, Annika Boas Employee of: Novartis, Stefanie Welle Employee of: Novartis, Hans-Peter Tony Consultant of: AbbVie, Astra-Zeneca, BMS, Chugai, Janssen, Lilly, MSD, Novartis, Pfizer, Roche, Sanofi

Gettering in PolySi/SiOx Passivating Contacts Enables Si-Based Tandem Solar Cells with High Thermal and Contamination Resilience

Multijunction solar cells in a tandem configuration could further lower the costs of electricity if crystalline Si (c-Si) is used as the bottom cell. However, for direct monolithic integration on c-Si, only a restricted number of top and bottom cell architectures are compatible, due to either epitaxy or high-temperature constraints, where the interface between subcells is subject to a trade-off between transmittance, electrical interconnection, and bottom cell degradation. Using polySi/SiO_x passivating contacts for Si, this degradation can be largely circumvented by tuning the polySi/SiO_x stacks to promote gettering of contaminants admitted into the Si bottom cell during the top cell synthesis. Applying this concept to the low-cost top cell chalcogenides Cu₂ZnSnS₄ (CZTS), CuGaSe₂ (CGSe), and AgInGaSe₂ (AIGSe), fabricated under harsh S or Se atmospheres above 550 °C, we show that increasing the heavily doped polySi layer thickness from 40 to up to 400 nm prevents a reduction in Si carrier lifetime by 1 order of magnitude, with final lifetimes above 500 μs uniformly across areas up to 20 cm². In all cases, the increased resilience was correlated with a 99.9% reduction in contaminant concentration in the c-Si bulk, provided by the thick polySi layer, which acts as a buried gettering layer in the tandem structure without compromising the Si passivation quality. The Si resilience decreased as AIGSe > CGSe > CZTS, in accordance with the measured Cu contamination profiles and higher annealing temperatures. An efficiency of up to 7% was achieved for a CZTS/Si tandem, where the Si bottom cell is no longer the limiting factor.

Form Factors and Two-Photon Exchange in High-Energy Elastic Electron-Proton Scattering

We present new precision measurements of the elastic electron-proton scattering cross section for momentum transfer (Q^{2}) up to 15.75  (GeV/c)^{2}. Combined with existing data, these provide an improved extraction of the proton magnetic form factor at high Q^{2} and double the range over which a longitudinal or transverse separation of the cross section can be performed. The difference between our results and polarization data agrees with that observed at lower Q^{2} and attributed to hard two-photon exchange (TPE) effects, extending to 8  (GeV/c)^{2} the range of Q^{2} for which a discrepancy is established at >95% confidence. We use the discrepancy to quantify the size of TPE contributions needed to explain the cross section at high Q^{2}.

Study of Λn FSI with Λ quasi-free productions on the 3H(e, e′K+)X reaction at JLab

Abstract. An nnΛ is a neutral baryon system with no charge. The study of the pure Λ-neutron system such as nnΛ gives us information on the Λn interaction. The nnΛ search experiment (E12-17-003) was performed at JLab Hall A in 2018. In this article, the Λn FSI was investigated by a shape analysis of the 3H(e, e′K+)X missing mass spectrum, and a preliminary result for the Λn FSI study is given.

Cross-section measurement of virtual photoproduction of iso-triplet three-body hypernucleus, Λnn

Missing-mass spectroscopy with the 3H(e, e′K+) reaction was carried out at Jefferson Lab’s (JLab) Hall A in Oct–Nov, 2018. The differential cross section for the 3H(γ∗, K+)Λnn was deduced at ω = Ee − Ee′ = 2.102 GeV and at the forward K+-scattering angle (0° ≤ θγ∗K ≤ 5°) in the laboratory frame. Given typical predicted energies and decay widths, which are (BΛ, Γ) = (−0.25, 0.8) and (−0.55, 4.7) MeV, the cross sections were found to be 11.2 ± 4.8(stat.)+4.1−2.1(sys.) and 18.1 ± 6.8(stat.)+4.2−2.9(sys.) nb/sr, respectively. The obtained result would impose a constraint for interaction models particularly between Λ and neutron by comparing to theoretical calculations.

Study of the Λ/Σ0 electroproduction in the low-Q2 region at JLab

We performed an experiment using tritium and hydrogen cryogenic gas targets at Thomas Jefferson National Accelerator Facility (JLab) in 2018 (E12-17-003)[1, 2]. In this article, we discuss the Λ/Σ0 hyperon electroproduction from hydrogen target. Elementary Λ/Σ0 hyperon production processes are important not only for an absolute mass scale calibration in our experiment, but also for the study of the electroproduction mechanisms themselves. In this article, we reported the results of the differential cross section for the p(e, e’K+)Λ/Σ0 reaction at Q2 ∼ 0.5 (GeV/c)2.

Deep Exclusive Electroproduction of π^{0} at High Q^{2} in the Quark Valence Regime

We report measurements of the exclusive neutral pion electroproduction cross section off protons at large values of x_{B} (0.36, 0.48, and 0.60) and Q^{2} (3.1 to 8.4  GeV^{2}) obtained from Jefferson Lab Hall A experiment E12-06-014. The corresponding structure functions dσ_{T}/dt+εdσ_{L}/dt, dσ_{TT}/dt, dσ_{LT}/dt, and dσ_{LT^{'}}/dt are extracted as a function of the proton momentum transfer t-t_{min}. The results suggest the amplitude for transversely polarized virtual photons continues to dominate the cross section throughout this kinematic range. The data are well described by calculations based on transversity generalized parton distributions coupled to a helicity flip distribution amplitude of the pion, thus providing a unique way to probe the structure of the nucleon.

3ω correction method for eliminating resistance measurement error due to Joule heating

Electrical four-terminal sensing at (sub-)micrometer scales enables the characterization of key electromagnetic properties within the semiconductor industry, including materials' resistivity, Hall mobility/carrier density, and magnetoresistance. However, as devices' critical dimensions continue to shrink, significant over/underestimation of properties due to a by-product Joule heating of the probed volume becomes increasingly common. Here, we demonstrate how self-heating effects can be quantified and compensated for via 3ω signals to yield zero-current transfer resistance. Under further assumptions, these signals can be used to characterize selected thermal properties of the probed volume, such as the temperature coefficient of resistance and/or the Seebeck coefficient.

Dynamic Interfacial Reaction Rates from Electrochemistry-Mass Spectrometry

Electrochemistry-mass spectrometry is a versatile and reliable tool to study the interfacial reaction rates of Faradaic processes with high temporal resolutions. However, the measured mass spectrometric signals typically do not directly correspond to the partial current density toward the analyte due to mass transport effects. Here, we introduce a mathematical framework, grounded on a mass transport model, to obtain a quantitative and truly dynamic partial current density from a measured mass spectrometer signal by means of deconvolution. Furthermore, it is shown that the time resolution of electrochemistry-mass spectrometry is limited by entropy-driven processes during mass transport to the mass spectrometer. The methodology is validated by comparing the measured impulse responses of hydrogen and oxygen evolution to the model predictions and subsequently applied to uncover dynamic phenomena during hydrogen and oxygen evolution in an acidic electrolyte.

Effective electrical resistivity in a square array of oriented square inclusions

The continuing miniaturization of optoelectronic devices, alongside the rise of electromagnetic metamaterials, poses an ongoing challenge to nanofabrication. With the increasing impracticality of quality control at a single-feature (-device) resolution, there is an increasing demand for array-based metrologies, where compliance to specifications can be monitored via signals arising from a multitude of features (devices). To this end, a square grid with quadratic sub-features is amongst the more common designs in nanotechnology (e.g. nanofishnets, nanoholes, nanopyramids, μLED arrays etc). The electrical resistivity of such a quadratic grid may be essential to its functionality; it can also be used to characterize the critical dimensions of the periodic features. While the problem of the effective electrical resistivity ρ _eff of a thin sheet with resistivity ρ ₁, hosting a doubly-periodic array of oriented square inclusions with resistivity ρ ₂, has been treated before (Obnosov 1999 SIAM J. Appl. Math. 59 1267-87), a closed-form solution has been found for only one case, where the inclusion occupies c = 1/4 of the unit cell. Here we combine first-principle approximations, numerical modeling, and mathematical analysis to generalize ρ _eff for an arbitrary inclusion size (0 < c < 1). We find that in the range 0.01 ≤ c ≤ 0.99, ρ _eff may be approximated (to within <0.3% error with respect to finite element simulations) by: [Formula: see text] [Formula: see text] whereby at the limiting cases of c → 0 and c → 1, α approaches asymptotic values of α = 2.039 and α = 1/c - 1, respectively. The applicability of the approximation to considerably more complex structures, such as recursively-nested inclusions and/or nonplanar topologies, is demonstrated and discussed. While certainly not limited to, the theory is examined from within the scope of micro four-point probe (M4PP) metrology, which currently lacks data reduction schemes for periodic materials whose cell is smaller than the typical μm-scale M4PP footprint.

In situ TEM modification of individual silicon nanowires and their charge transport mechanisms

Correlating the structure and composition of nanowires grown by the vapour-liquid-solid (VLS) mechanism with their electrical properties is essential for designing nanowire devices. In situ transmission electron microscopy (TEM) that can image while simultaneously measuring the current-voltage (I-V) characteristics of individual isolated nanowires is a unique tool for linking changes in structure with electronic transport. Here we grow and electrically connect silicon nanowires inside a TEM to perform in situ electrical measurements on individual nanowires both at high temperature and upon surface oxidation, as well as under ambient conditions. As-grown, the oxide-free nanowires have nonlinear I-V characteristics. We analyse the I-V measurements in terms of both bulk and injection limited transport models, finding Joule heating effects, bulk-limiting effects for thin nanowires and an injection-limiting effect for thick wires when high voltages are applied. When the nanowire surface is modified by in situ oxidation, drastic changes occur in the electronic properties. We investigate the relation between the observed geometry, changes in the surface structure and changes in electronic transport, obtaining information for individual nanowires that is inaccessible to other measuring techniques.

Spin-coated [Formula: see text] solar cells: A study on the transformation from ink to film

In this paper, we study the DMSO/thiourea/chloride salt system for synthesis of pure-sulfide [Formula: see text] (CZTS) thin-film solar cells under ambient conditions. We map out the ink constituents and determine the effect of mixing time and filtering. The thermal behavior of the ink is analyzed, and we find that more than 90% of the solvent has evaporated at [Formula: see text]. However, chloride and sulfoxide species are released continually until [Formula: see text], suggesting the advantage of a higher pre-annealing temperature, which is also commonly observed in the spin-coating routines in literature. Another advantage of a higher pre-annealing temperature is that the worm-like pattern in the spin-coated film can be avoided. We hypothesize that this pattern forms as a result of hydrodynamics within the film as it dries, and it causes micro-inhomogeneities in film morphology. Devices were completed in order to finally evaluate the effect of varying thermal exposure during pre-annealing. Contrary to the previous observations, a lower pre-annealing temperature of [Formula: see text] results in the best device efficiency of 4.65%, which to the best of our knowledge is the highest efficiency obtained for a pure-sulfide kesterite made with DMSO. Lower thermal exposure during pre-annealing results in larger grains and a thicker [Formula: see text] layer at the CZTS/Mo interface. Devices completed at higher pre-annealing temperatures display the existence of either a Cu-S secondary phase or an incomplete sulfurization with smaller grains and a fine-grain layer at the back interface.

Energy band alignment at the heterointerface between CdS and Ag-alloyed CZTS

Energy band alignment at the heterointerface between CdS and kesterite Cu₂ZnSnS₄ (CZTS) and its alloys plays a crucial role in determining the efficiency of the solar cells. Whereas Ag alloying of CZTS has been shown to reduce anti-site defects in the bulk and thus rise the efficiency, the electronic properties at the interface with the CdS buffer layer have not been extensively investigated. In this work, we present a detailed study on the band alignment between n-CdS and p-CZTS upon Ag alloying by depth-profiling ultraviolet photoelectron spectroscopy (UPS) and X-ray photoelectron spectroscopy (XPS). Our findings indicate that core-level peaks and the valence band edge of CdS exhibit a significant shift to a lower energy (larger than 0.4 eV) upon the etching of the CdS layer, which can be assigned due to band bending and chemical shift induced by a change in the chemical composition across the interface. Using a simplified model based on charge depletion layer conservation, a significantly larger total charge region depletion width was determined in Ag-alloyed CZTS as compared to its undoped counterpart. Our findings reveal a cliff-like band alignment at both CdS/CZTS and CdS/Ag-CZTS heterointerfaces. However, the conduction-band offset decreases by more than 0.1 eV upon Ag alloying of CZTS. The approach demonstrated here enables nanometer-scale depth profiling of the electronic structure of the p–n junction and can be universally applied to study entirely new platforms of oxide/chalcogenide heterostructures for next-generation optoelectronic devices.

Electron inelastic mean free path in water

Liquid phase transmission electron microscopy (LPTEM) is rapidly developing as a powerful tool for probing processes in liquid environments with close to atomic resolution. Knowledge of the water thickness is needed for reliable interpretation and modelling of analytical studies in LPTEM, and is particularly essential when using thin liquid layers, required for achieving the highest spatial resolutions. The log-ratio method in electron energy-loss spectroscopy (EELS) is often applied in TEM to quantify the sample thickness, which is measured relative to the inelastic mean free path (λIMFP). However, λIMFP itself is dependent on sample material, the electron energy, and the convergence and divergence angles of the microscope electronoptics. Here, we present a detailed quantitative analysis of the λIMFP of water as functions of the EELS collection angle (β) at 120 keV and 300 keV in a novel nanochannel liquid cell. We observe good agreement with earlier studies conducted on ice, but find that the most widely used theoretical models significantly underestimate λIMFP of water. We determine an adjusted average energy-loss term Em, water, and characteristic scattering angle θE, water that improve the accuracy. The results provide a comprehensive knowledge of the λIMFP of water (or ice) for reliable interpretation and quantification of observations in LPTEM and cryo-TEM studies.

Persistent Double-Layer Formation in Kesterite Solar Cells: A Critical Review

In kesterite Cu₂ZnSn(S,Se)₄ (CZTSSe) solar cell research, an asymmetric crystallization profile is often obtained after annealing, resulting in a bilayered - or double-layered - CZTSSe absorber. So far, only segregated pieces of research exist to characterize the appearance of this double layer, its formation dynamics, and its effect on the performances of devices. In this work, we review the existing research on double-layered kesterites and evaluate the different mechanisms proposed. Using a cosputtering-based approach, we show that the two layers can differ significantly in morphology, composition, and optoelectronic properties and complement the results with a large statistical data set of over 850 individual CZTS solar cells. By reducing the absorber thickness from above 1000 to 300 nm, we show that the double-layer segregation is alleviated. In turn, we see a progressive improvement in the device performance for lower thickness, which alone would be inconsistent with the well-known case of ultrathin CIGS solar cells. We therefore attribute the improvements to the reduced double-layer occurrence and find that the double layer limits the efficiency of our devices to below 7%. By comparing the results with CZTS grown on monocrystalline Si substrates, without a native Na supply, we show that the alkali metal supply does not determine the double-layer formation but merely reduces the threshold for its occurrence. Instead, we propose that the main formation mechanism is the early migration of Cu to the surface during annealing and formation of Cu_2-xS phases in a self-regulating process akin to the Kirkendall effect. Finally, we comment on the generality of the mechanism proposed by comparing our results to other synthesis routes, including our own in-house results from solution processing and pulsed laser deposition of sulfide- and oxide-based targets. We find that although the double-layer occurrence largely depends on the kesterite synthesis route, the common factors determining the double-layer occurrence appear to be the presence of metallic Cu and/or a chalcogen deficiency in the precursor matrix. We suggest that understanding the limitations imposed by the double-layer dynamics could prove useful to pave the way for breaking the 13% efficiency barrier for this technology.

AB1147 SCREENED – HIGH REMISSION RATES UNDERLINE THE BENEFIT OF SCREENING CONSULTATION MODELS FOR EARLY RECOGNITION AND TREATMENT OF RHEUMATIC AND MUSCULOSKELETAL DISEASES

Background:

Early recognition and treatment of rheumatic and musculoskeletal diseases (RMDs) is of critical importance for the individual outcome. However, nationwide health care structures in Germany do not facilitate early access to initial rheumatologic evaluation. Furthermore, waiting times of several months due to substantial capacity constrains in regional rheumatology care services compromise the prognostically relevant “window of opportunity” for subsequent sustained remission. To promote early detection of RMDs, the Division of Rheumatology at the University hospital Heidelberg, Germany has launched a unique screening consultation model that offers early access to rheumatologic evaluation on regional level.

Objectives:

The registry-based study SCREENED (“Screen for early diagnosis”) has been initiated to monitor the outcome of patients that were diagnosed with an RMD at the screening clinic and to assess the costs and benefits of this consultation model for the regional quality of care.

Methods:

The screening consultation model has been launched in two phases: in the first phase (02/2016 - 01/2018), a screening clinic open to all patients without previous rheumatologic evaluation with appointments according to the registration order has been established through rearrangement of available capacities. In contrast to regular appointments, the screening clinic took place in shorter consultation time frames and without additional diagnostic procedures. In the second phase (02/2018 - 01/2020), in order to manage and prioritize access to rheumatologic care at our division more efficiently, prior to appointment allocation (not only) to the screening clinic all new patient registrations became subject to a preselection procedure based on the evaluation of an anamnesis questionnaire, medical reports and laboratory findings by an experienced rheumatologist. Furthermore, SCREENED project has been launched for scientific evaluation of both phases of the consultation model.

Results:

The screening consultation model achieved a significant reduction in waiting times to few weeks compared to six months for a regular appointment. In the first phase, the screening clinic had a high sensitivity of 94.3% and an improvable specificity of 31.1%. In the retrospective cohort, high remission rates have been observed over all RMD entities (120/206 = 58.3% patients based on physicians’ assessment in the follow-up after screening clinic) and in rheumatoid arthritis (RA) in particular (38/61 = 62.3% and 33/55 = 60% patients with DAS28 score < 2,6 after 12 and 24 months respectively). Remission was usually reached within a year after the first appointment (9.5 ± 6.7 months), however, a trend to higher remission rates in patients with shorter illness duration was obvious. In RA patients, csDMARDs have been initiated in a third of patients immediately at diagnosis in the screening clinic and in another third within six months after the first appointment. After 12 months, > 80% have received csDMARDs, while only 14.2% needed b/tsDMARDs in the follow-up over 24 months.

Conclusion:

High sensitivity and significant reduction in waiting times for initial rheumatologic evaluation in the screening clinic pave the way for early recognition and treatment of RMDs. Subsequently, high remission rates in the follow-up were reached. In RA, a high proportion of patients only required csDMARDs to achieve sustained remission. A correspondingly small proportion of patients necessitating b/tsDMARD in the follow-up points towards a significant health economic benefit of the early rheumatologic intervention in the screening consultation model.

Disclosure of Interests:

Karolina Benesova Grant/research support from: Study grants for SCREENED study by Abbvie, Novartis and Rheumaliga Baden-Württemberg, Consultant of: One-time participation in Novartis advisory board., Vivienne Lion Grant/research support from: Grant/research support from: Study grants for SCREENED study by Abbvie, Novartis and Rheumaliga Baden-Württemberg, Oliver Hansen Grant/research support from: Grant/research support from: Study grants for SCREENED study by Abbvie, Novartis and Rheumaliga Baden-Württemberg, Hanns-Martin Lorenz Grant/research support from: Consultancy and/or speaker fees and/or travel reimbursements: Abbvie, MSD, BMS, Pfizer, Celgene, Medac, GSK, Roche, Chugai, Novartis, UCB, Janssen-Cilag, Astra-Zeneca, Lilly. Scientific support and/or educational seminars and/or clinical studies: Abbvie, MSD, BMS, Pfizer, Celgene, Medac, GSK, Roche, Chugai, Novartis, UCB, Janssen-Cilag, Astra-Zeneca, Lilly, Baxter, SOBI, Biogen, Actelion, Bayer Vital, Shire, Octapharm, Sanofi, Hexal, Mundipharm, Thermo Fisher., Consultant of: see above

Probing Few-Body Nuclear Dynamics via ^{3}H and ^{3}He (e,e^{'}p)pn Cross-Section Measurements

We report the first measurement of the (e,e^{'}p) three-body breakup reaction cross sections in helium-3 (^{3}He) and tritium (^{3}H) at large momentum transfer [⟨Q^{2}⟩≈1.9  (GeV/c)^{2}] and x_{B}>1 kinematics, where the cross section should be sensitive to quasielastic (QE) scattering from single nucleons. The data cover missing momenta 40≤p_{miss}≤500  MeV/c that, in the QE limit with no rescattering, equals the initial momentum of the probed nucleon. The measured cross sections are compared with state-of-the-art ab initio calculations. Overall good agreement, within ±20%, is observed between data and calculations for the full p_{miss} range for ^{3}H and for 100≤p_{miss}≤350  MeV/c for ^{3}He. Including the effects of rescattering of the outgoing nucleon improves agreement with the data at p_{miss}>250  MeV/c and suggests contributions from charge-exchange (SCX) rescattering. The isoscalar sum of ^{3}He plus ^{3}H, which is largely insensitive to SCX, is described by calculations to within the accuracy of the data over the entire p_{miss} range. This validates current models of the ground state of the three-nucleon system up to very high initial nucleon momenta of 500  MeV/c.

Single-shot, omni-directional x-ray scattering imaging with a laboratory source and single-photon localization

Omni-directional, ultra-small-angle x-ray scattering imaging provides a method to measure the orientation of micro-structures without having to resolve them. In this letter, we use single-photon localization with the Timepix3 chip to demonstrate, to the best of our knowledge, the first laboratory-based implementation of single-shot, omni-directional x-ray scattering imaging using the beam-tracking technique. The setup allows a fast and accurate retrieval of the scattering signal using a simple absorption mask. We suggest that our new approach may enable faster laboratory-based tensor tomography and could be used for energy-resolved x-ray scattering imaging.

CMUT Electrode Resistance Design: Modelling and Experimental Verification by a Row-Column Array

This paper addresses the importance of having control over the resistivity of the electrodes for capacitive micromachined ultrasonic transducers (CMUT) devices. The electrode resistivity can vary depending on the fabrication technology used, and resistivity control becomes especially important in the cases where metal electrodes can not be used. This raises the question: When is the resistivity of an electrode sufficiently low? To answer this question we have developed a simple design criterion. The criterion describes the attenuation of AC signals along a CMUT element. It is shown that the non-dimensional product between angular excitation frequency, resistance, and capacitance ωRC of an element has to be smaller than 0.35 to ensure an AC potential drop along the element of less than 1%. The optimal magnitude and directionality of the transmit pressure will be achieved if CMUT elements are designed according to the developed criteria. Hence, the model can be used to estimate device parameters that will ensure the CMUT is suitable for generating ultrasound images. An example is given where the model is used to predict the required electrode thickness for structured electrodes made of Gold, Aluminium, and Indium-Tin-Oxide, respectively. To verify the model, two Row-Column addressed (RCA) CMUT transducers were used to illustrate the effect of high and low electrode resistivity. One transducer had a sufficient electrode resistivity, and the other had an insufficient electrode resistivity. The RCA CMUT transducers were fabricated using fusion bonding, where the top electrode is made of aluminium and the bottom electrode is made of doped silicon. The resistivity of the aluminium top electrode is 2×10-6 Ωcm for both transducers, whereas the resistivity for the bottom electrode is 0.1 Ωcm for the first transducer and 0.005 Ωcm for the second transducer. The transducer with low resistivity emits pressure uniformly along both the rows and columns, whereas the transmit pressure field from the other transducer has a uniformly distributed pressure field along the rows, but a decreasing pressure field along the columns due to the high resistivity in the bottom electrode. The pressure drop, along the columns is frequency dependent and has been observed to be 63%, 74%, and 82% for the excitation frequencies 2 MHz, 4.5 MHz, and 7 MHz, respectively.

Deposition of methylammonium iodide via evaporation - combined kinetic and mass spectrometric study

Methylammonium lead halide perovskites have recently emerged as a very attractive and versatile material for solar cell production. Several different perovskite fabrication methods can be used though most of them involve either spin coating, evaporation under high vacuum or a combination hereof. In this study we focus on thermal evaporation of methylammonium iodide (MAI), or more specifically, why this process, in terms of a physical vapour deposition, requires such a high deposition pressure to be successful. We use quartz crystal micro balance (QCM) measurements as well as mass spectrometry. The results indicate that MAI has a very low sticking especially if the substrate is held at elevated temperatures and is furthermore observed to evaporate with disproportionation into primarily CH3NH2 and HI. Even when PbCl2 is deposited on the QCM crystal, so that CH3NH3PbI(3-x)Cl x perovskite can form, the MAI sticking remains low, possibly due to the requirement that both species be present on the film surface at the same time to form the perovskite. The results provide guidelines for designing a perovskite deposition chamber and additionally fundamental information about MAI evaporation.

A variable probe pitch micro-Hall effect method

Hall effect metrology is important for a detailed characterization of the electronic properties of new materials for nanoscale electronics. The micro-Hall effect (MHE) method, based on micro four-point probes, enables a fast characterization of ultrathin films with minimal sample preparation. Here, we study in detail how the analysis of raw measurement data affects the accuracy of extracted key sample parameters, i.e., how the standard deviation on sheet resistance, carrier mobility and Hall sheet carrier density is affected by the data analysis used. We compare two methods, based primarily on either the sheet resistance signals or the Hall resistance signals, by theoretically analysing the effects of electrode position errors and electrical noise on the standard deviations. We verify the findings with a set of experimental data measured on an ultrashallow junction silicon sample. We find that in presence of significant electrical noise, lower standard deviation is always obtained when the geometrical analysis is based on the sheet resistance signals. The situation is more complicated when electrode position errors are dominant; in that case, the better method depends on the experimental conditions, i.e., the distance between the insulating boundary and the electrodes. Improvement to the accuracy of Hall Effect measurement results is crucial for nanoscale metrology, since surface scattering often leads to low carrier mobility.

Electrical characterization of single nanometer-wide Si fins in dense arrays

This paper demonstrates the development of a methodology using the micro four-point probe (μ4PP) technique to electrically characterize single nanometer-wide fins arranged in dense arrays. We show that through the concept of carefully controlling the electrical contact formation process, the electrical measurement can be confined to one individual fin although the used measurement electrodes physically contact more than one fin. We demonstrate that we can precisely measure the resistance of individual ca. 20 nm wide fins and that we can correlate the measured variations in fin resistance with variations in their nanometric width. Due to the demonstrated high precision of the technique, this opens the prospect for the use of μ4PP in electrical critical dimension metrology.