Solar photo-Fenton and persulphate-based processes for landfill leachate treatment: A critical review

Landfilling is the most usual solid waste management strategy for solid residues disposal. However, it entails several drawbacks such as the generation of landfill leachate that seriously threaten human life and the environment due to their toxicity and carcinogenic character. Among various technologies, solar photo-Fenton and sulphate-based processes have proven to be suitable for the treatment of these polluted streams. This review critically summarises the last three decades of studies in this field. It is found that the solar homogeneous photo-Fenton process should be preferably used as a pre- and post-treatment of biological technologies and as a standalone treatment for young, medium, and mature leachates, respectively. Studies on heterogeneous solar photo-Fenton process are lacking so that this technology may be scaled-up for industrial applications. Sulphate radicals are attractive for removing both COD and ammonia. However, no study has been reported on solar sulphate activation for landfill leachate treatment. This review discusses the main advances and challenges on treating landfill leachate through solar AOPs, it compares solar photo-Fenton and solar persulphate-based treatments, indicates the future research directions and contributes for a better understanding of these technologies towards sustainable treatment of landfill leachate in sunny and not-so-sunny regions.

Evaluation of a battery of biotests to improve waste ecotoxicity assessment (HP 14), using incineration bottom ash as a case study

The assessment of waste ecotoxicity (hazardous property HP14 in the European Union) is fundamental for proper waste classification and safe application/disposal. Biotests are relevant for evaluating waste complex matrices, but their efficiency is crucial to encourage their adoption at the industrial level. This work aims at evaluating possibilities of improving the efficiency of a biotest battery previously suggested in the literature, regarding test selection, duration, and/or laboratory resources optimization. Fresh incineration bottom ash (IBA) was the case study. The test battery analysed included standard aquatic (bacteria, microalgae, macrophytes, daphnids, rotifers, fairy shrimp) and terrestrial (bacteria, plants, earthworms, collembolans) organisms. The assessment followed an Extended Limit Test design (three dilutions of eluate or solid IBA) and the Lowest Ineffective Dilution (LID-approach) for ecotoxicity classification. The results emphasize the importance of testing different species. It was also evidenced that tests with daphnids and earthworms may be shortened to 24 h; the miniaturization of tests is suitable as e.g. differential sensitivity of microalgae and macrophytes was captured with low variability; alternative testing kits can be used when methodological difficulties are found. Microalgae were more sensitive than macrophytes. Similar results were found for the Thamnotoxkit and daphnids test for eluates with natural pH, so the former may be used as an alternative. B. rapa was the most sensitive organism, suggesting that it may be tested as the only terrestrial plant species and that minimum test duration is appropriate. F. candida does not appear to add information to the battery. The differences in sensitivity of A. fischeri and E. fetida compared to the remaining species were not significant enough to exclude them from the battery. Thus, this work suggests a biotest battery to test IBA comprising aquatic tests - Aliivibrio fischeri, Raphidocelis subcapitata (miniaturised test), and Daphnia magna (24 h when clear deleterious effects are observed) or Thamnocephalus platyurus (toxkit) - and terrestrial tests - Arthrobacter globiformis, Brassica rapa (14 d), and Eisenia fetida (24 h). Testing waste with natural pH is also recommended. The Extended Limit Test design considering the LID-approach seems useful in waste testing, particularly for the industry, involving low effort, test material requirements, and few laboratory resources. The LID-approach allowed for differentiating ecotoxic from non-ecotoxic effects and captured different sensitivities between species. Ecotoxicological assessment of other waste may benefit from these recommendations, but caution should be taken given the properties of each waste type.

An integrated characterisation of incineration bottom ashes towards sustainable application: Physicochemical, ecotoxicological, and mechanical properties

Environmental protection is a central concern regarding municipal solid waste incineration bottom ash (IBA) management, but the assessment of waste Hazardous Property HP14 (ecotoxicity) is still under debate. Civil engineering applications may be a suitable management strategy. This work aimed at evaluating IBA regarding mechanical behaviour and environmental hazardous potential, including a biotest battery for ecotoxicity assessment (comprising miniaturised tests), to explore its potential for safe utilization. Physical, chemical, ecotoxicological (Aliivibrio fischeri, Raphidocelis subcapitata, Lemna minor, Daphnia magna, Lepidium sativum), and mechanical (one-dimensional compressibility, shear strength) analyses were performed. The low leaching for potentially toxic metals and ions complied with European Union (EU) limit values for non-hazardous waste landfills. No relevant ecotoxicological effects were found. The biotest battery seems suitable for ecotoxicological assessment in the aquatic ecosystem, providing wide information on waste impact on different trophic/functional levels and chemical uptake routes, simultaneously involving short-duration tests and reduced amounts of waste. IBA presented more compressibility than sand, but its mixture with sand (30%:70%) was closer to sand compressibility. IBA (lower stresses) and the mixture (higher stresses) showed slightly higher shear strength than sand. Overall, IBA presented the potential for valorisation as loose aggregates from an environmental and mechanical viewpoint in a circular economy framework.

Comparative analysis of methods and models for predicting biochemical methane potential of various organic substrates

Biochemical methane potential (BMP) corresponds to the maximum methane production at anaerobic digestion infinite time and is a key parameter to evaluate the suitability of substrates to obtain biogas. The main objective of this work is to explore the data available in the literature for ten categories of substrates to compare and develop new methods and mathematical models able to predict BMP. Indeed, experimental procedure is time-consuming, laborious and costly, and the development of methods or models based on properties easily assessed may be very helpful at industrial scale. In this study, three substrates (banana waste, tomato waste and winery wastewater) were tested and compared with >150 results from the literature. The analysis involved four methods (Met_I to Met_IV) and five models developed by multivariate regression (Mod_I to Mod_V). Met_I is related to elemental analysis; Met_II with the organic fraction composition; Met_III is associated with chemical oxygen demand (COD); Met_IV is based on NIR spectra. Regression models are combinations by grouping single variables: C, H, O, N (Mod_I); hemicellulose, lignin (LG), acid detergent fibre (ADF) (Mod_II); volatile solids (VS), COD (Mod_III); proteins (PT), carbohydrates (CRB), lipids (LP) (Mod_IV); and CRB, LP, PT, LG, ADF (Mod_V). The results showed that no significant correlation can be found between BMP and single common properties (e.g. VS or C/N ratio). However, good results may be achieved with models developed by multivariate regression (R² from 0.93 to 0.98, and R²_adj from 0.91 to 0.96). The prediction of BMP based on Met_IV, which is based on NIR spectroscopy combined with a multivariate regression model, revealed to be a promising method for both data from literature as well as for substrates analyzed in the present work.

Comparison of Photocatalytic and Photosensitized Oxidation of Paraben Aqueous Solutions Under Sunlight

It is well-established that aquatic wildlife is exposed to natural and synthetic endocrine disrupting compounds which are able to interfere with the hormonal system. Although advanced oxidation processes (AOPs) have shown to be effective, their application is limited by a relatively high operational cost. In order to reduce the cost of energy consumed in the AOPs, widely available solar energy instead of UV light may be applied either as photocatalytic oxidation or as photosensitized oxidation. The main goal of the present study was to investigate the sunlight photodegradation of paraben mixture. Two processes, namely the photocatalytic oxidation with modified TiO2 nanoparticles and photosensitized oxidation with photosensitive chitosan beads, were applied. The oxidants were identified as singlet oxygen and hydroxyl radicals for photosensitized and photocatalytic oxidation, respectively. The toxicity, as well as ability to water disinfection of both processes under natural sunlight, has been investigated. Application of sunlight for the processes led to degradation of parabens. The efficiency of both processes was comparable. Despite the fact that singlet oxygen is weaker oxidant than hydroxyl radicals, the photosensitized oxidation seems to be more promising for wastewater purification, due to the possibility of chitosan bead reuse and more effective water disinfection. Graphical Abstractᅟ.

The reciprocal interaction between sleep and type 2 diabetes mellitus: facts and perspectives

Type 2 diabetes mellitus is a systemic disease characterized by intolerance to glucose and peripheral resistance to insulin. This endocrine disease affects fundamental mechanisms of the central nervous system and jeopardizes the balance of vital functions such as the cardiovascular and circadian rhythm. The increased prevalence of metabolic disorders in our society is aggravated by endemic voluntary postponement of bedtime and by the current sedentary lifestyle, leading to epidemic proportions of obese people. Diabetes and chronic loss of sleep share the fact that both affect millions and one is detrimental to the other. Indeed, sleep deficits have marked modulatory effects on glucose metabolism and insulin sensitivity and foster metabolic syndrome that culminates in sleep disorders like restless syndrome and sleep apnea, which in turn lead to poor sleep quality. We examine the hypothesis that these two worldwide emerging disorders are due to two interlinked cycles. In our paradigm, we establish an intimate relationship between diabetes and sleep disturbances and postulate possible mechanisms that provide support for this conjecture. In addition, we propose some perspectives about the development of the reciprocal interaction between predictor components of metabolic syndrome and sleep disturbances that lead to poor sleep quality. The ability to predict the development and identify or associate a given mode of sleep disturbance to diabetes would be a valuable asset in the assessment of both. Furthermore, major advances in care coupled with healthy lifestyles can ensure a higher quality of life for people with diabetes.

Influence of multiple clinical use on fatigue resistance of ProTaper rotary nickel-titanium instruments

AIM

To examine the influence of clinical use on the occurrence of deformation and fracture and on the fatigue resistance of ProTaper rotary instruments.

METHODOLOGY

Root canal treatments were performed on patients using the ProTaper rotary system. Ten sets of instruments were used by an experienced endodontist, each set in five molars. Another 10 sets of instruments were used by the same operator, each set in eight molars. In addition, 10 sets of instruments were used, each set in five molars, by undergraduate students with no clinical experience with the system. After clinical use, S1, S2, F1 and F2 instruments were analysed for damage by optical and scanning electron microscopy. The used sets, along with a control group of 12 sets of new instruments, were then tested in a bench device for fatigue resistance.

RESULTS

The use of the ProTaper rotary instruments by an experienced endodontist allowed for the cleaning and shaping of the root canal system of up to eight molars without fracture. During the students work, six instruments fractured. Fatigue resistance decreased upon clinical use for all instruments analysed.

CONCLUSIONS

Fatigue resistance of used instruments was reduced, but no significant change was observed amongst the instruments used for shaping the canals of five and eight molars. Operator experience affected the occurrence of fracture and plastic deformation during shaping.

The simple SDD

We describe the fabrication and characterisation of the SIMPLE superheated droplet detector, a 10 g active mass device of C(2)ClF(5) in 1-3% weight concentrations currently employed in a direct search for spin-dependent astroparticle dark matter candidates.

Physical and mechanical characterization and the influence of cyclic loading on the behaviour of nickel-titanium wires employed in the manufacture of rotary endodontic instruments

AIM

To analyse the influence of cyclic loading on the mechanical behaviour of nickel-titanium (NiTi) wires employed in the manufacture of ProFile rotary endodontic instruments.

METHODOLOGY

Nickel-titanium wires, 1.2 mm in diameter, taken from the production line of ProFile rotary endodontic instruments before the final machining step, were tensile-tested to rupture in the as-received condition and after 100 load-unload cycles in the superelastic plateau (4% elongation). The wires were characterized by X-ray energy-dispersive spectroscopy, X-ray diffraction and by differential scanning calorimetry and compared with new size 30, .06 taper ProFile instruments. The fracture surfaces of the wires were observed by scanning electron microscopy.

RESULTS

The mechanical properties of the as-received wires, their chemical composition, the phases present and their transformation temperatures were consistent with their final application. Only small changes, which decreased after the first few cycles, took place in the mechanical properties of the cycled wires. The stress at maximum load and the plastic strain at breakage remained the same, while the critical stress for inducing the superelastic behaviour, which is related to the restoring force of the endodontic instruments, decreased by approximately 27%.

CONCLUSIONS

The mechanical behaviour of the NiTi wires was modified slightly by cyclic tensile loading in the superelastic plateau. As the changes tended towards stabilization, the clinical use of rotary NiTi ProFile instruments does not compromise their superelastic properties until they fracture by fatigue or torsional overload, or are otherwise discarded.

Celiac disease and epilepsy: favorable outcome in a child with difficult to control seizures

We report the case of a child with difficulties to control epilepsy and celiac disease, diagnosed soon after the onset of the seizure disorder. Seizure frequency and pattern, in addition to electroencephalogram record were suggestive of Lennox-Gastaut syndrome. Diagnosis of celiac disease was determined by positive anti-endomysium and anti-transglutaminase tests, and abnormal jejunal biopsy. Gluten-free diet, started soon after the diagnosis, led to progressive seizure control, allowing significant decrease in dosage of anti-epileptic drugs. This case corroborates the importance of serological screening tests for celiac disease, at least in patients with difficult to control epilepsy.

Surface analysis of ProFile instruments by scanning electron microscopy and X-ray energy-dispersive spectroscopy: a preliminary study

AIM

The purpose of this preliminary study was to analyze surface irregularities on ProFile nickel-titanium (NiTi) rotary instruments before use, after sterilization by two different methods and after instrumentation of molar root canals.

METHODOLOGY

Five new ProFile NiTi rotary instruments with 0.04 taper, size 20, five instruments with 0.04 taper, size 25 and five with 0.06 taper, size 20 were analyzed by scanning electron microscopy (SEM) and X-ray energy-dispersive spectroscopy (EDS). The instruments were then divided into two groups: three of each taper and size were sterilized in a dry heat sterilizer, whilst two of each taper and size were sterilized in an autoclave. After inspection by the same techniques, the files were used to instrument six molar root canals, and again analyzed by SEM/EDS.

RESULTS

Together with the usual machining defects, a variable amount of material containing mainly carbon and sulphur was found on the surface of new instruments. This material was not removed by standard cleaning and sterilization procedures. The use of the files for instrumentation of root canals eliminated a considerable amount of the adhered substance, but deposits rich in calcium and phosphorus accumulated on the remaining impurities.

CONCLUSIONS

The adherence of dentine on surface deposits found on new ProFile instruments requires special cleaning, prior to sterilization.

[New therapeutic trends in nursing--natural therapies--assistance programs]

The present study reports the experience lived by the nurses in the Nursing Clinic of the Campus Universitário do Grande ABC (UniABC), using natural therapies: applied kinesiology, acupuncture and reflexology as therapeutic actions of nursing. At last, the study emphasizes the relevance of the technical-specific application in the development of nursing activities and the consequent effect in the nursing care.

Phenylpropanoids and tetrahydrofuran lignans from Piper solmsianum

A tetrahydrofuran lignan as well as the known tetrahydrofuran lignan, (-)-grandisin, and five phenylpropanoid derivatives were isolated from Piper solmsianum. Their structures were determined by means of spectral analyses, including 2D NMR techniques such as NOE-DIFF and HMBC 3J(C-H).

Patterns of synthesis and secretion of sulfated glycosaminoglycans in primary cortical and cerebellar astrocytes in vitro

We determined the amounts of [35S]-glycosaminoglycans (GAGs) found on the intracellular, pericellular and extracellular compartments of primary cultures of astrocytes derived from newborn rat cortex and cerebellum in vitro. Our results show that the greatest portion of newly synthesized GAGs were found in different cellular compartments, depending on the source of the astrocytes. In the cells derived from the cerebellum, the proportion of [35S]-GAGs secreted to the culture medium preponderates over the amount found in the two other compartments, whereas cells derived from the cortex accumulated higher proportions of [35S]-GAGs in the intracellular compartment than in the two other compartments. Cortical and cerebellar glial cells synthesised and secreted heparan sulfate (HS) and chondroitin 4-sulfate (C-4S). HS was predominantly accumulated on the pericellular surface, while C-4S was mostly secreted to the culture medium. Beside the difference on the distribution of total [35S]-GAGs among the three cellular compartments, no difference was observed on the relative proportions of HS and C-4S within each compartment. By defining the source of GAGs, the present study may help to complement and extend information on biosynthesis of these compounds by mammalian glial cells.

Human gingival glycosaminoglycans in cyclosporin-induced overgrowth

Glycosaminoglycans in normal and cyclosporin-induced gingival overgrowth were extracted by papain digestion and purified by Mono Q-FPLC chromatography. The purified glycosaminoglycans were analyzed by agarose gel electrophoresis and by the pattern of degradation products formed by chondroitin lyases on HPLC chromatography. Our results on the glycosaminoglycan composition showed presence of chondroitin 4- and 6-sulfate, dermatan sulfate, heparan sulfate and hyaluronic acid in both normal gingiva and cyclosporin-induced gingival overgrowth. The total and relative amounts of glycosaminoglycans were similar between normal and overgrown gingiva. This suggests that the glycosaminoglycan composition is not changed in cyclosporin-induced gingival overgrowth. Our present biochemical results conflict with histochemical and biosynthetic data previously reported by other groups. Those studies suggested that the affected tissues contained higher levels of glycosaminoglycans and that cyclosporin induced comparably high levels of these compounds in in vitro cultures of gingival fibroblasts. Therefore, these discrepant results suggest that a cyclosporin-induced increase on gingival glycosaminoglycans still remains an open question. The implications of these conflicting results are discussed.

Cytokine mRNA expression in leprosy: a possible role for interferon-gamma and interleukin-12 in reactions (RR and ENL)

Leprosy patients during the natural course of the disease may develop reactional episodes, namely reversal reaction (RR) and erythema nodosum leprosum (ENL). Immunological events described as occurring during RR indicate up-regulation of the immune response, whereas in ENL the events are not fully understood. The aim of this study was to analyse the in vivo pattern of cytokine gene expression in the reactional states of leprosy. Peripheral blood mononuclear cells (PBMC, n = 14) and tissue samples (n = 17) obtained from patients with ENL and RR were obtained and assayed by RT-PCR. PBMC obtained from unreactional patients (n = 15) and normal individuals (n = 5) were also assessed. Expression of interferon (IFN)gamma, granulocyte-macrophage colony stimulating factor (GM-CSF), interleukin (IL)-2Rp55, perforin and IL-1beta mRNA in PBMC were detected mostly in ENL/RR patients, but not in unreactional patients. Likewise, cytokines such as IL-6, IL-8, tumour necrosis factor (TNF)alpha and TNFbeta were also present in reactional and tuberculoid patients as opposed to lepromatous leprosy (BL/LL). Interestingly, the majority of ENL/RR patients showed messages for IL-6, IL-10, IL-12 and TNFalpha in the skin. IFNgamma was detected in 84.6% (ENL) and 100% (RR) of the patients, whereas IL-4 was detected only in few individuals (38.5 and 25%, respectively). Although mRNA expression and protein levels may be different, the data reported in this study suggest a cytokine mRNA profile that seems to be indistinguishable for RR and ENL. In addition, it shows up-regulation of immuno-inflammatory cytokines in the blood and tissue of the same patient examined before and during reaction. Furthermore, it is suggested that this pattern of response results from an immunological reactivation that might lead to an acute inflammatory response in both reactional episodes.

Activity and stability of a Rhizomucor miehei lipase in hydrophobic media

The effects of detergents and organic solvents on a commercial lipase (Lipozyme) from Rhizomucor miehei were investigated. It was shown that the detergent sodium cholate is possibly an activator of the enzyme, increasing lipase activity 2.5 times (250% of the control) when the enzyme was preincubated with 7 mM cholate. Lipozyme activity was over twice as high (230% of the control) in the presence of 80 mM Tween 80 or 90 mM Tween 20 (polyoxyethylenesorbitan monolaurate), apparently through an additional emulsifying action on the substrate. Preincubation with Tween 80 (polyoxyethylenesorbitan mono-oleate) did not affect enzyme activity. In contrast, lipase activity was completely inhibited in the presence of an 8.9 mM concentration of another non-ionic detergent, Brij 58, whereas with a 16.4 mM concentration of the cationic detergent cetyltrimethylammonium bromide (CTAB), enzyme activity was reduced by 80%. Preincubation of Lipozyme with the same concentrations of Brij 58 [poly(oxyethylene)20 cetyl ether] and CTAB promoted total inactivation of the enzyme. Organic solvents had different effects on lipase activity and stability. Of the tested solvents, hexane was least deleterious to lipase activity and did not alter enzyme stability on preincubation. These results suggest that Lipozyme can be used in esterification reactions with hexane as solvent or in hydrolysis reactions with Tween 20 or Tween 80 as emulsifying agents, after pretreatment with sodium cholate.