Electrical and optical properties of NiO composite films by radio frequency magnetron sputtering

The 100-nm NiO-Ag composite films with Ag content of 0 to 24.4 at.% are deposited on glass substrates. It is found that an ultra high electric resistivity (rho) value is obtained and cannot be detected by four point probe measurement when the Ag content is less than 3.4 at.%. The rho value is reduced significantly to 29.0 Omega-cm as Ag content is increased to 4.2 at.%, and it decreases greatly to 0.009 Omega-cm as the content of Ag is further increased to 24.4 at.%. The NiO-Ag composite film with Ag content of 4.2 at.% shows p-type conduction. However, it becomes n-type when the Ag content increases to 9.3 at.%, which results from the Ag atoms segregated at grain boundary of NiO when the excess Ag atoms are added into NiO films. On the other hand, the transmittance of the NiO-Ag films drops continuously from 96.3% to 31.6% as the Ag content increases from 0 to 24.4%.

Combined immersion and oral vaccination of Vietnamese catfish (Pangasianodon hypophthalmus) confers protection against mortality caused by Edwardsiella ictaluri

Edwardsiella ictaluri septicemia occurs worldwide and causes high mortality and considerable economic damage to the catfish industry especially in Vietnam and the USA. To control Edwardsiella septicemia farmers extensively use antibiotics and various vaccination methods. Vaccination with inactivated vaccines has come with variable efficacy. In this trial the results of an approach of controlling Edwardsiella septicemia of Tra catfish (Pangasianodon hypophthalmus) in Vietnam through vaccination via mucosal surfaces are presented. The results show that a combination of primary vaccination by immersion with inactivated E. ictaluri followed by an oral boost with a formulated antigen preparation induces a statistically significant level of protection against mortality caused by experimental infection 4 weeks post-boost. Fish immunized by immersion only show significantly lower level of protection but significantly higher than the controls. Repeated boosts result in improved duration of immunity with a relative percent survival (RPS) of 47% at 90% control mortality. The immunization procedure provides an alternative for disease control through vaccination.

Comparison of human, primate, and canine femora: implications for biomaterials testing in total hip replacement

The canine model remains an animal of choice for determining the efficacy and safety of various materials and designs used in human total hip replacement (THR). The primate also is used in orthopedic-related research for studying limb anatomy, gait, and age-related bone loss. In order to better understand the appropriateness of these animal models for human THR, external morphologies of thirty-three adult Caucasian human, sixteen adult chimpanzee, and forty-two adult greyhound femora were compared using osteometric methods. Measured parameters included anteversion angle, cervico-diaphyseal angle, femoral head offset in the frontal plane, and anterior bow profiles along the femoral diaphysis. Although some of the measured parameters were approximately similar between species (e.g., mean cervico-diaphyseal angle of humans and chimpanzees), the majority demonstrated morphologic differences that may be biomechanically significant for interpreting stress transfer across the hip (e.g., mean anteversion angle and mean normalized femoral head offset between species). Additionally, age-related changes in proximal femoral morphology and gait pattern, as well as species-related differences in local muscle and inertial forces, may result in notably different loading conditions across the hip joint of each species. Therefore, discretion must be exercised when evaluating canine or primate THR materials and designs for potential use in the human hip.

p(42)Be neutron therapy beams: dose rate and penetration as a function of target thickness and beam filtration

It is shown that, in the production of p(42)Be neutron beams for clinical use, the use of semithick targets leads to more desirable beam characteristics when appropriate backstop materials are used. Furthermore, an algebraic representation of beam penetration and of dose per unit charge on target, including hardening by polyethylene filters, provides a method for target optimization.

The influence of target thickness and backstop material on proton-produced neutron beams for radiotherapy

Results are presented of measurements of skin sparing, penetration and total dose per unit of incident charge for various target thicknesses and filtrations for a neutron beam generated by 42 MeV protons on beryllium. These results are contrasted to predictions outlined in a previous paper. The differences from these predictions are attributed to the contribution of low-energy neutrons produced by the residual proton beam in the thick copper target backstop.

Dosimetric measurements in the neutron field produced by a deuterium gas target with a compact medical cyclotron

Several dosimetric measurements have been carried out in the neutron field produced by accelerated deuterons incident upon a pressurized deuterium gas target. A significant improvement has been achieved in central-axis depth dose when compared to the 9Be(3He,n)11C interaction previously studied . Designs for a target with a high-power dissipation capability are currently underway.